scholarly journals Pharmacological and Advanced Cell Respiration Effects, Enhanced by Toxic Human-Bile Nano-Pharmaceuticals of Probucol Cell-Targeting Formulations

Pharmaceutics ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 708
Author(s):  
Susbin Raj Wagle ◽  
Bozica Kovacevic ◽  
Daniel Walker ◽  
Corina Mihaela Ionescu ◽  
Melissa Jones ◽  
...  
Keyword(s):  
Drug Release ◽  
Bile Acids ◽  
Oral Delivery ◽  
Oral Absorption ◽  
Lithocholic Acid ◽  
Ex Vivo ◽  
Biological Effects ◽  
Drug Formulation ◽  
Human Bile

Bile acids have recently been studied for potential applications as formulation excipients and enhancers for drug release; however, some bile acids are not suitable for this application. Unconjugated lithocholic acid (ULCA) has recently shown drug formulation-stabilizing and anti-inflammatory effects. Lipophilic drugs have poor gut absorption after an oral dose, which necessitates the administration of high doses and causes subsequent side effects. Probucol (PB) is a highly lipophilic drug with poor oral absorption that resulted in restrictions on its clinical prescribing. Hence, this study aimed to design new delivery systems for PB using ULCA-based matrices and to test drug formulation, release, temperature, and biological effects. ULCA-based matrices were formulated for PB oral delivery by applying the jet-flow microencapsulation technique using sodium alginate as a polymer. ULCA addition to new PB matrices improved the microcapsule’s stability, drug release in vitro (formulation study), and showed a promising effect in ex vivo study (p < 0.05), suggesting that ULCA can optimize the oral delivery of PB and support its potential application in diabetes treatment.

Improved Oral Delivery of Rosuvastatin by Using Self Nanoemulsifying Drug Delivery System

2013 ◽  
Vol 678 ◽  
pp. 286-290 ◽  
Author(s):  
N. Subramanian ◽  
P. Chandra Sekar ◽  
S. Abimanyu ◽  
S.P. Sharavanan ◽  
R. Gayathri ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Oral Delivery ◽  
Oral Absorption ◽  
Ex Vivo ◽  
Lipid Lowering ◽  
Conventional Tablet

The aim of the present study was to develop a self nanoemulsifying drug delivery system (SNEDDS) for the improved oral delivery of Rosuvastatin, a lipid lowering agent. Captex 810D, based on the higher solubility of Rosuvastatin was selected as an oil phase. Mixture of permeation enhancers such as Solutol HS15 and Acconon MC8 was selected as surfactants for the formulation of SNEDDS. Formulated SNEDDS upon mixing with water, dispersed rapidly into fine droplets size ranging from 95-263nm. Further the SNEDDS was evaluated for self nanoemulsification time, precipitation, cloud point, morphology, in-vitro drug release and ex-vivo permeation. Formulation (F3) showed the globule size of 139nm, quick self nanoemulsifiation time (20 sec) and transparency (97%). Maximum drug release of 99.9% and higher drug permeation of 95% was observed with formulation F3 when compared with conventional tablet. The formulated SNEDDS can be used to improve the oral absorption and bioavailability of Rosuvastatin.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

Preparation, characterizations and in vitro evaluation of Econazole-Btamethasone loaded solid lipid nanoparticles (SLNs)

2021 ◽  
pp. 1-12
Author(s):  
Kamran Khan ◽  
Shefaat Ullah Shah ◽  
Yusuf S. Althobaithi ◽  
Kifayat Ullah Shah ◽  
Aman Ullah ◽  
...  
Keyword(s):  
Antifungal Activity ◽  
Side Effects ◽  
Drug Release ◽  
Oral Delivery ◽  
Encapsulation Efficiency ◽  
Fungal Infections ◽  
Ex Vivo ◽  
Sem Images ◽  
Drug Content

Tremendous increase of fungal infections in hospitalized or immune compromised patients has been reported from the last two decades. These infections are commonly treated using econazole and miconazole that have shorter half-life and produce severe side effects. All such issues can be addressed using targeted drug delivery. We developed SNLs based formulation for the treatment of mycosis. The high pressure homogenization method was employed for formulation followed by characterization, assay for antifungal activity, in vitro drug release and ex vivo permeation. The particle size of Econazole-Betamethasone-loaded SLNs, Econazole-loaded SLNs, Betamethasone-loaded SLNs and Blank SLNs were 377.4±23 nm, 298.7±9 nm, 177.7±15 nm and 113.4±6 nm respectively. The SEM images displayed that droplets are uniform and spherical in shape which ranged from 113.4±6 to 377.4±23 nm. In DSC, the SLNs formulation showed endothermic peak at 185.2 °C±0.9. Drug content of Econazole loaded SLNs was 82±0.1 and its entrapment efficiency was approximately 90.4±0.2. Betamethasone SLNs displayed highest drug content which was 83.5±0.4 while encapsulation efficiency of same formulation was 94.2±0.4. The Econazole and Betamethasone combined SLNs exhibited drug content of 80±0.3 while its encapsulation efficiency was 93.1±0.5. E-SLNs have significantly high drug release (p <  0.05) as compared to other formulation B-SLNs and EB-SLNs.The Econazole loaded formulations displayed antifungal activity with no synergistic or antagonistic effect with each other. Drug permeation from Econazole SLNs, Betamethasone SLNs and combined Econazole and Betamethasone SLNs was 45%, 40% and 38% respectively. Overall, SLN’s are an effective carrier for topical delivery of antifungals agents and that may be helpful in bypassing the serious side effects associated with oral delivery.

scholarly journals Pharmacological and Biological Study of Microencapsulated Probucol-Secondary Bile Acid in a Diseased Mouse Model

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1223
Author(s):  
Susbin Raj Wagle ◽  
Bozica Kovacevic ◽  
Corina Mihaela Ionescu ◽  
Daniel Walker ◽  
Melissa Jones ◽  
...  
Keyword(s):  
Lithocholic Acid ◽  
Biological Effects ◽  
Drug Formulation ◽  
Biological Study ◽  
Protective Effects ◽  
Β Cells ◽  
Secondary Bile Acid ◽  
Positive Effects

Probucol (PB) is a highly lipophilic drug with potential protective effects on pancreatic β-cells from inflammation and oxidation. PB has poor bioavailability and solubility, and despite many attempts, significant improvement in antidiabetic effects or absorption has yet to be discovered. Recently, the role of bile acids has been established in significant drug formulation stabilisation effects and as cell-penetrating agents. Promising results in pharmaceutical formulation studies on drug stability and release patterns when lithocholic acid (LCA) is conjugated with PB and sodium alginate (SA) have been demonstrated. Thus, this study aimed to develop and characterise PB microcapsules incorporating LCA and examine the biological effects of the microcapsules in vitro and in vivo. PB/LCA microcapsules were prepared using an encapsulation method, ionic gelation vibrational jet flow technology. LCA incorporation in PB microcapsules showed positive effects on β-cells with improved insulin release, antioxidant activity, and PB intracellular uptake. Diabetic mice gavaged LCA-PB microcapsules showed a significant reduction in diabetes signs and symptoms, better survival rate, reduced blood glucose levels, and pro-inflammatory cytokines, with an increase PB level in blood and tissues suggesting a potential therapy for treating diabetes mellitus.

Formulation and Characterization of Glimepiride Nanoparticles for Dissolution Enhancement

2020 ◽  
Vol 10 (5) ◽  
pp. 649-663
Author(s):  
Reena Siwach ◽  
Parijat Pandey ◽  
Harish Dureja
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Oral Absorption ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Class Ii ◽  
Dissolution Enhancement ◽  
In Vitro Drug Release ◽  
Bcs Class Ii

Background: The rate-limiting step in the oral absorption of BCS class II drugs is dissolution. Their low solubility is one of the major obstacles in the process of drug development. Dissolution rate can be increased by decreasing the particle size to the nano range, eventually leading to increased bioavailability. Objective: : In the present study, glimepiride loaded nanoparticles were prepared to enhance the dissolution rate. The aim of the work was to examine the effect of polymer-drug ratio, solvent-antisolvent ratio and speed of mixing on in vitro release of glimepiride. Methods: Glimepiride is an antidiabetic drug belonging to the BCS class II drugs. The polymeric nanoparticles were formulated according to Box-Behnken Design (BBD) using nanoprecipitation technique. The prepared nanoparticles were evaluated for in vitro drug release, loading capacity, entrapment efficiency, and percentage yield. Result: It was found that NP-8 has maximum in vitro drug release and was selected as an optimized batch. Analysis of Variance (ANOVA) was applied to the in vitro drug release to study the fitness and significance of the model. The batch NP-8 showed 70.34 ± 1.09% in vitro drug release in 0.1 N methanolic HCl and 92.02 ± 1.87% drug release in phosphate buffer pH 7.8. The release data revealed that the nanoparticles followed zero order kinetics. Conclusion: The study revealed that the incorporation of glimepiride into gelucire 50/13 resulted in enhanced dissolution rate.

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

Synthesis and characterization of Chitosan-Catechol conjugates: Development and in vitro, in silico and in vivo evaluation of mucoadhesive pellets of lafutidine

2021 ◽  
pp. 088391152199784
Author(s):  
Loveleen Kaur ◽  
Ajay Kumar Thakur ◽  
Pradeep Kumar ◽  
Inderbir Singh
Keyword(s):  
Drug Release ◽  
In Silico ◽  
Ex Vivo ◽  
Strong Interactions ◽  
Dissolution Time ◽  
Sem Images ◽  
In Vivo Evaluation ◽  
Release Studies

Present study was aimed to synthesize and characterize Chitosan-Catechol conjugates and to design and develop mucoadhesive pellets loaded with lafutidine. SEM images indicated the presence of fibrous structures responsible for enhanced mucoadhesive potential of Chitosan-Catechol conjugates. Thermodynamic stability and amorphous nature of conjugates was confirmed by DSC and XRD studies respectively. Rheological studies were used to evaluate polymer mucin interactions wherein strong interactions between Chitosan-Catechol conjugate and mucin was observed in comparison to pristine chitosan and mucin. The mucoadhesion potential of Chitosan-Catechol (Cht-C) versus Chitosan (Cht) was assessed in silico using molecular mechanics simulations and the results obtained were compared with the in vitro and ex vivo results. Cht-C/mucin demonstrated much higher energy stabilization (∆E ≈ −65 kcal/mol) as compared to Cht/mucin molecular complex. Lafutidine-loaded pellets were prepared from Chitosan (LPC) and Chitosan-Catechol conjugates (LPCC) and were evaluated for various physical properties viz. flow, circularity, roundness, friability, drug content, particle size and percent mucoadhesion. In vitro drug release studies on LPC and LPCC pellets were performed for computing t50%, t90% and mean dissolution time. The values of release exponent from Korsmeyer-Peppas model was reported to be 0.443 and 0.759 for LPC and LPCC pellets suggesting Fickian and non-Fickian mechanism representing drug release, respectively. In vivo results depicted significant controlled release and enhanced residence of the drug after being released from the chitosan-catechol coated pellets. Chitosan-Catechol conjugates were found to be a promising biooadhesive polymer for the development of various mucoadhesive formulations.

Computational prediction of small molecules with predicted binding to FGFR3 and testing biological effects in bone cells

2021 ◽  
pp. 153537022110021
Author(s):  
Subburaman Mohan ◽  
Karthikeyan Muthusamy ◽  
Selvaraman Nagamani ◽  
Chandrasekhar Kesavan
Keyword(s):  
Bone Formation ◽  
Small Molecules ◽  
Density Functional ◽  
Absorption Rate ◽  
Oral Absorption ◽  
Bone Cells ◽  
Biological Effects ◽  
Dynamics Simulation ◽  
Molecular Stability

Activating anabolic receptor-mediated signaling is essential for stimulating new bone formation and for promoting bone healing in humans. Fibroblast growth factor receptor (FGFR) 3 is reported to be an important positive regulator of osteogenesis. Presently, recombinant proteins are used to stimulate FGFR3 function but have limitations for therapy due to expense and stability. Therefore, there is a need for identification of novel small molecules binding to FGFR3 that promote biological function. In silico molecular docking and high-throughput virtual screening on zinc database identified seven compounds predicted to bind to an active site within the βCʹ-βE loop, specific to FGFR3. All seven compounds fall within an acceptable range of ADME/T properties. Four compounds showed a 30–65% oral absorption rate. Density functional theory analysis revealed a high HOMO-LUMO gap, reflecting high molecular stability for compounds 14977614 and 13509082. Five compounds exhibited mutagenicity, while the other three compounds presented irritability. Computational mutagenesis predicted that mutating G322 affected compound binding to FGFR3. Molecular dynamics simulation revealed compound 14977614 is stable in binding to FGFR3. Furthermore, compound 14977614, with an oral absorption rate of 60% and high molecular stability, produced significant increases in both proliferation and differentiation of bone marrow stromal cells in vitro. Anti-FGFR3 treatment completely blocked the stimulatory effect of 14977614 on BMSC proliferation. Ex vivo treatment of mouse calvaria in organ culture for seven days with 14977614 increased mineralization and expression levels of bone formation markers. In conclusion, computational analyses identified seven compounds that bind to the FGFR3, and in vitro studies showed that compound 14977614 exerts significant biological effects on osteogenic cells.

scholarly journals Effect of Chitosan Coating on PLGA Nanoparticles for Oral Delivery of Thymoquinone: In Vitro, Ex Vivo, and Cancer Cell Line Assessments

Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 6
Author(s):  
Sultan Alshehri ◽  
Syed Sarim Imam ◽  
Md Rizwanullah ◽  
Khalid Umar Fakhri ◽  
Mohd Moshahid Alam Rizvi ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Cancer Cell Line ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Cancer Management ◽  
Mcf 7

In the present study, thymoquinone (TQ)-encapsulated chitosan- (CS)-coated poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) were formulated using the emulsion evaporation method. NPs were optimized by using 33-QbD approach for improved efficacy against breast cancer. The optimized thymoquinone loaded chitosan coated Poly (d,l-lactide-co-glycolide) nanoparticles (TQ-CS-PLGA-NPs) were successfully characterized by different in vitro and ex vivo experiments as well as evaluated for cytotoxicity in MDA-MB-231 and MCF-7 cell lines. The surface coating of PLGA-NPs was completed by CS coating and there were no significant changes in particle size and entrapment efficiency (EE) observed. The developed TQ-CS-PLGA-NPs showed particle size, polydispersibility index (PDI), and %EE in the range between 126.03–196.71 nm, 0.118–0.205, and 62.75%–92.17%. The high and prolonged TQ release rate was achieved from TQ-PLGA-NPs and TQ-CS-PLGA-NPs. The optimized TQ-CS-PLGA-NPs showed significantly higher mucoadhesion and intestinal permeation compared to uncoated TQ-PLGA-NPs and TQ suspension. Furthermore, TQ-CS-PLGA-NPs showed statistically enhanced antioxidant potential and cytotoxicity against MDA-MB-231 and MCF-7 cells compared to uncoated TQ-PLGA-NPs and pure TQ. On the basis of the above findings, it may be stated that chitosan-coated TQ-PLGA-NPs represent a great potential for breast cancer management.

Mannosylated Solid Lipid Nanocarriers Of Chrysin To Target Gastric Cancer: Optimization and Cell line Study.

2021 ◽  
Vol 18 ◽  
Author(s):  
Sonia S. Pandey ◽  
Farhinbanu I. Shaikh ◽  
Arti R. Gupta ◽  
Rutvi J. Vaidya
Keyword(s):  
Gastric Cancer ◽  
Particle Size ◽  
Ex Vivo ◽  
Biological Effects ◽  
Entrapment Efficiency ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Lipid Nanocarriers

Background: Despite significant biological effects, the clinical use of chrysin has been restricted because of its poor oral bioavailability. Objective: The purpose of the present research was to investigate the targeting potential of Mannose decorated chrysin (5,7- dihydroxyflavone) loaded solid lipid nanocarrier (MC-SLNs) for gastric cancer. Methods: The Chrysin loaded SLNs (C-SLNs) were developed optimized, characterized and further mannosylated. The C-SLNs were developed with high shear homogenizer, optimized with 32 full factorial designs and characterized by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) and evaluated for particle size/polydispersity index, zeta-potential, entrapment efficiency, % release and haemolytic toxicity. The ex-vivo cytotoxicity study was performed on gastric cancer (ACG) and normal cell lines. Results: DSC and XRD data predict the chrysin encapsulation in lipid core and FTIR results confirm the mannosylation of C-SLNs. The optimized C-SLNs exhibited a narrow size distribution with a particle size of 285.65 nm. The % Entrapment Efficiency (%EE) and % controlled release were found to be 74.43% and 64.83%. Once C-SLNs were coated with mannose, profound change was observed in dependent variable - increase in the particle size of MC-SLNs (307.1 nm) was observed with 62.87% release and 70.8% entrapment efficiency. Further, the in vitro studies depicted MC- SLNs to be least hemolytic than pure chrysin and C-SLNs. MC-SLNs were most cytotoxic and were preferably taken up ACG tumor cells as evaluated against C-SLNs. Conclusion: These data suggested that the MC-SLNs demonstrated better biocompatibility and targeting efficiency to treat the gastric cancer.

Sign in / Sign up

Export Citation Format

Share Document