scholarly journals Photonic Jet-Shaped Optical Fiber Tips versus Lensed Fibers

Photonics ◽  
2021 ◽  
Vol 8 (9) ◽  
pp. 373
Author(s):  
Djamila Bouaziz ◽  
Grégoire Chabrol ◽  
Assia Guessoum ◽  
Nacer-Eddine Demagh ◽  
Sylvain Lecler
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Single Mode ◽  
Spot Size ◽  
Base Diameter ◽  
Core Diameter ◽  
Focus Spot ◽  
Photonic Jet ◽  
Focus Spot Size ◽  
Focusing Properties

Shaped optical fiber tips have recently attracted a lot of interest for photonic jet light focusing due to their easy manipulation to scan a sample. However, lensed optical fibers are not new. This study analyzes how fiber tip parameters can be used to control focusing properties. Our study shows that the configurations to generate a photonic jet (PJ) can clearly be distinguished from more classical-lensed fibers focusing. PJ is a highly concentrated, propagative light beam, with a full width at half maximum (FWHM) that can be lower than the diffraction limit. According to the simulations, the PJs are obtained when light is coupled in the guide fundamental mode and when the base diameter of the microlens is close to the core diameter. For single mode fibers or fibers with a low number of modes, long tips with a relatively sharp shape achieve PJ with smaller widths. On the contrary, when the base diameter of the microlens is larger than the fiber core, the focus point tends to move away from the external surface of the fiber and has a larger width. In other words, the optical system (fiber/microlens) behaves in this case like a classical-lensed fiber with a larger focus spot size. The results of this study can be used as guidelines for the tailored fabrication of shaped optical fiber tips according to the targeted application.

scholarly journals Analysis of Design and Fabrication Parameters for Lensed Optical Fibers as Pertinent Probes for Sensing and Imaging

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4150 ◽  
Author(s):  
Soongho Park ◽  
Sunghwan Rim ◽  
Ju Kim ◽  
Jinho Park ◽  
Ik-Bu Sohn ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Single Mode ◽  
Spot Size ◽  
Single Mode Fiber ◽  
Fiber Probe ◽  
Optical Fiber Probe ◽  
Working Distance ◽  
Physical Sensing ◽  
Fabrication Parameters

A method for adjusting the working distance and spot size of a fiber probe while suppressing or enhancing the back-coupling to the lead-in fiber is presented. As the optical fiber probe, a lensed optical fiber (LOF) was made by splicing a short piece of coreless silica fiber (CSF) on a single-mode fiber and forming a lens at the end of the CSF. By controlling the length of the CSF and the radius of lens curvature, the optical properties of the LOF were adjusted. The evolution of the beam in the LOF was analyzed by using the Gaussian ABCD matrix method. To confirm the idea experimentally, 17 LOF samples were fabricated and analyzed theoretically and also experimentally. The results show that it is feasible in designing the LOF to be more suitable for specific or dedicated applications. Applications in physical sensing and biomedical imaging fields are expected.

scholarly journals Multiple Light Coupling and Routing via a Microspherical Resonator Integrated in a T-Shaped Optical Fiber Configuration System

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 521 ◽  
Author(s):  
Georgia Konstantinou ◽  
Karolina Milenko ◽  
Kyriaki Kosma ◽  
Stavros Pissadakis
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Single Mode ◽  
Equatorial Region ◽  
Experimental Results ◽  
Glass Microsphere ◽  
Single Mode Optical Fiber ◽  
Light Coupling ◽  
Fiber Taper ◽  
Optical Fiber Taper

We demonstrate a three-port, light guiding and routing T-shaped configuration based on the combination of whispering gallery modes (WGMs) and micro-structured optical fibers (MOFs). This system includes a single mode optical fiber taper (SOFT), a slightly tapered MOF and a BaTiO3 microsphere for efficient light coupling and routing between these two optical fibers. The BaTiO3 glass microsphere is semi-immersed into one of the hollow capillaries of the MOF taper, while the single mode optical fiber taper is placed perpendicularly to the latter and in contact with the equatorial region of the microsphere. Experimental results are presented for different excitation and reading conditions through the WGM microspherical resonator, namely, through single mode optical fiber taper or the MOF. The experimental results indicate that light coupling between the MOF and the single mode optical fiber taper is facilitated at specific wavelengths, supported by the light localization characteristics of the BaTiO3 glass microsphere, with spectral Q-factors varying between 4.5 × 103 and 6.1 × 103, depending on the port and parity excitation.

scholarly journals Microdrilled tapers to enhance optical fiber lasers for sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. A. Perez-Herrera ◽  
M. Bravo ◽  
P. Roldan-Varona ◽  
D. Leandro ◽  
L. Rodriguez-Cobo ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Lasers ◽  
Signal To Noise Ratio ◽  
Power Level ◽  
Single Mode ◽  
Optical Signal ◽  
Single Mode Fiber ◽  
Output Power Level ◽  
Linear Cavity

AbstractIn this work, an experimental analysis of the performance of different types of quasi-randomly distributed reflectors inscribed into a single-mode fiber as a sensing mirror is presented. These artificially-controlled backscattering fiber reflectors are used in short linear cavity fiber lasers. In particular, laser emission and sensor application features are analyzed when employing optical tapered fibers, micro-drilled optical fibers and 50 μm-waist or 100 μm-waist micro-drilled tapered fibers (MDTF). Single-wavelength laser with an output power level of about 8.2 dBm and an optical signal-to-noise ratio of 45 dB were measured when employing a 50 μm-waist micro-drilled tapered optical fiber. The achieved temperature sensitivities were similar to those of FBGs; however, the strain sensitivity improved more than one order of magnitude in comparison with FBG sensors, attaining slope sensitivities as good as 18.1 pm/με when using a 50 μm-waist MDTF as distributed reflector.

Automated Fiber-Optic System for Monitoring the Stability of the Pit Quarry Mass and Dumps

2021 ◽  
pp. 19-26
Author(s):  
А.D. Меkhtiyev ◽  
◽  
E.G. Neshina ◽  
P.Sh. Madi ◽  
D.A. Gorokhov ◽  
...  
Keyword(s):  
Rock Mass ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Light Wave ◽  
Single Mode ◽  
Fiber Optic Sensors ◽  
Fiber Optic Sensor ◽  
Laboratory Sample ◽  
Single Mode Optical Fiber

This article ls with the issues related to the development of a system for monitoring the deformation and displacement of the rock mass leading to the collapse of the quarry sides. Monitoring system uses point-to-point fiber-optic sensors. Fiber-optic sensors and control cables of the communication line are made based on the single mode optical fibers, which allows to measure with high accuracy the deformations and displacements of the rock mass at a distance of 30-50 km. To create fiber-optic pressure sensors, an optical fiber of the ITU-T G. 652.D standard is used. Laboratory sample is developed concerning the point fiber-optic sensor made based on the two-arm Mach-Zender interferometer using a single mode optical fiber for monitoring strain (displacements) with a change in the sensitivity and a reduced influence of temperature interference leading to zero drift. The article presents a mathematical apparatus for calculating the intensity of radiation of a light wave passing through an optical fiber with and without mechanical stress. A laboratory sample of single mode optical fibers based on the Mach-Zender interferometer showed a fairly high linearity and accuracy in the measurement and can be used to control the strain of the mass after appropriate refinement of its design. Mathematical expressions are also given for determining the intensity of the light wave when the distance between the fixing points of a single mode optical fiber changes depending on the change in the external temperature. A diagram for measuring strain using a point fiber-optic strain sensor is developed. Hardware and software package is developed, which can be used to perform a number of settings of measuring channels. The work is aimed at solving the production problems of the Kenzhem quarry of AK Altynalmas JSC.

Study on Coupling of Step and Graded Index Single Mode Optical Fiber Considering the Transverse Misalignment

2020 ◽  
Vol 8 (2) ◽  
pp. 78-82
Author(s):  
Prosenjit Roy Chowdhury ◽  
◽  
Keyword(s):  
Optical Fiber ◽  
Communication Systems ◽  
Structural Parameters ◽  
Fractional Power ◽  
Single Mode ◽  
Spot Size ◽  
Fiber Coupling ◽  
Fundamental Parameters ◽  
Graded Index ◽  
Wide Range

"Advance design and day to day up-gradation of communication system is the requirement of international telecommunication. The optical communication systems involve the effective fiber coupling or splicing to meet the need of long communication channel. When the studies on both the intensive and extensive properties of optical fiber are exploring new research horizons, the effectiveness of such systems can be calibrated with transmission parameters like transmitted fractional power, which is a function of ‘spot size’ as well. Our study of fiber junctions based on fundamental parameters like wavelength, fiber profile index etc. has touched some unrevealed areas and explored some interesting results. The profile index of optical fiber has received less attention compared to other structural parameters of optical fiber but our study at important wavelengths for different profiles has shown that the less-used fiber profiles has some interesting premier outcomes, which can introduce some significant impact on optical fiber based system design and engineering. We have observed almost frequency or wavelength independent transmitted fractional power around the most used 1.55 micrometer wavelengths at some rarely used fiber profile index. Our study predicts the best and worst fiber profiles for transmitted fractional power (T ), at the same time, we have observed the fiber profile index independent region for a band of ‘T’ values. The reporting and its approach are found to be premier in this field. So, our work is reporting a comparison of effective fiber-to-fiber coupling, based on fiber profile index of different fibers. It is also giving a clear view of the wavelength dependency of effective fiber coupling for different fibers having wide range of graded fiber profiles."

Graded-Index and Single-Mode Polymer Optical Fibers

1992 ◽  
Vol 247 ◽  
Author(s):  
Yasuhiro Koike
Keyword(s):  
Mechanical Properties ◽  
Optical Fibers ◽  
Single Mode ◽  
Polymer Optical Fiber ◽  
Core Diameter ◽  
Graded Index ◽  
The Core ◽  
High Bandwidth ◽  
Polymer Optical Fibers ◽  
First Time

ABSTRACTHigh-bandwidth graded-index (GI) polymer optical fiber (POF) and single-mode POF with good mechanical properties were successfully obtained by our interfacial-gel polymerization technique. The bandwidth of the GI POF is about 1 GHz · km which is two hundred times larger than that of the conventional step-index (SI) POF. The minimum attenuation of transmission is 56 dB/km at 688-nm wavelength and 94 dB/km at 780-nm wavelength. The single-mode POF in which the core diameter was 3–15 μ m and the attenuation of transmission was 200 dB/km at 652-nm wavelength was successfully obtained for the first time.

Application of Optical Fiber Made of Various Materials with Composite Properties of Materials in Laser Medical Treatment

2012 ◽  
Vol 600 ◽  
pp. 222-225
Author(s):  
Zhen Zhang ◽  
Fang Liu
Keyword(s):  
Optical Fiber ◽  
Medical Treatment ◽  
Plastic Material ◽  
Numerical Aperture ◽  
Fiber Material ◽  
Spot Size ◽  
Light Transmittance ◽  
Core Diameter ◽  
Transmission Distance ◽  
Fiber Manufacturing

Though introducing the optical fiber in a laser medical treatment made ​​of different materials, contrast expounded integrated characteristic of the different materials in manufacturing an optical fiber material, summed four aspects need to be considered in the choice of the optical fiber manufacturing material. First, the laser parameters, such as maximum laser power, the wavelength, the transmission distance, the laser beam spot size and numerical aperture of the laser light source. Second, according to the optical fiber light transmittance curve, to identify the optimum transmittance of the application wavelength. Third, determining transmission optical slender core diameter, typically a core diameter is greater than the laser spot size of 2/3; decision sets of plastic material finally.

scholarly journals Polymer micro-lenses as an long-coupling-distance interfacing layer in low-cost optical coupling solution between optical fibers and photonic integrated waveguide circuits

2019 ◽  
Vol 11 (4) ◽  
pp. 121
Author(s):  
Andrzej Kaźmierczak ◽  
Mateusz Słowikowski ◽  
Krystian Pavłov ◽  
Maciej Filipiak ◽  
Ryszard Piramidowicz
Keyword(s):  
Optical Fiber ◽  
Focused Ion Beam ◽  
Low Cost ◽  
Ion Beam ◽  
Single Mode ◽  
Optical Fiber Communication ◽  
Japanese Journal ◽  
Spot Size ◽  
Optical Signal ◽  
Silicon On Insulator

We present a low-cost scheme for non-permanent optical signal coupling for prospective application in single use photonic integrated chips. The proposed scheme exploits the use of polymer kinoform microlenses. The feasibility of the proposed solution is demonstrated by the experimental investigation of the optical signal coupling from single mode optical fiber (SMF) to the test structure of SixNy integrated waveguide. Full Text: PDF ReferencesM. Smit et al., "An introduction to InP-based generic integration technology," Semiconductor Science and Technology, 29 (8), 083001, 2014 CrossRef R. Baets et al., "Silicon Photonics: silicon nitride versus silicon-on-insulator," in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2016), paper Th3J.1. CrossRef K. Shiraishi et al., "A silicon-based spot-size converter between single-mode fibers and Si-wire waveguides using cascaded tapers," Appl. Phys. Lett. 91, 141120 (2007) CrossRef Y. Sobu et al., "GaInAsP/InP waveguide dual core spot size converter for optical fiber,"IEEE Photonic Society 24th Annual Meeting, 469-470, (2011). CrossRef F. Van Laere et al., "Compact and Highly Efficient Grating Couplers Between Optical Fiber and Nanophotonic Waveguides," Journal of Lightwave Technology, vol. 25, no. 1, pp. 151-156, Jan. 2007. CrossRef A. Kaźmierczak et al., "Light coupling and distribution or Si3N4/SiO2 integrated multichannel single mode sensing system," Opt. Eng. 48, 2009, pp. 014401 CrossRef M. Rossi et al., "Arrays of anamorphic phase-matched Fresnel elements for diode-to-fiber coupling," Appl. Opt. 34, 2483-2488 (1995) CrossRef M. Prasciolu et al, "Fabrication of Diffractive Optical Elements On-Fiber for Photonic Applications by Nanolitography," Japanese Journal of Applied Physics, Volume 42, (2003) CrossRef F.Schiappelli et al., "Efficient fiber-to-waveguide coupling by a lens on the end of the optical fiber fabricated by focused ion beam milling" Microelectronic Engineering Volumes 73-74, pp.397-404 (2004) CrossRef

scholarly journals Curvature Analysis in Fiber Optic Cables as a Tilt Sensor Based on Macro Bending

2020 ◽  
Vol 2 (2) ◽  
pp. 91-99
Author(s):  
Imam Mulyanto
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Fiber Optic ◽  
Laser Light ◽  
Single Mode ◽  
Fiber Optic Cable ◽  
Power Meter ◽  
Curvature Analysis ◽  
Bending Process ◽  
Tilt Sensor

The test has been successfully carried out on optical fibers to be used as a macrobending tilt sensor using SMF-28 single mode optical fiber. The optical fiber was molded with silicon rubber, then connected to a laser light and a power meter to see the intensity of the laser power produced. The principle is carried out using the macro bending phenomenon on single mode optical fibers, where the laser light intensity in the fiber optic cable will decrease if there is a bend or bending in the fiber optic cable. We can observe the power loss resulting from the macro bending process to find out how sensitive the optical fiber is to changes in a given angle. The resulting optical fiber sensitivity value is -0.1534o/dBm.

Sign in / Sign up

Export Citation Format

Share Document