scholarly journals Chitosan Grafted with Biobased 5-Hydroxymethyl-Furfural as Adsorbent for Copper and Cadmium Ions Removal

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1173 ◽  
Author(s):  
Mariza Mone ◽  
Dimitra A. Lambropoulou ◽  
Dimitrios N. Bikiaris ◽  
George Kyzas
Keyword(s):  
Adsorption Capacity ◽  
Significant Loss ◽  
X Ray Diffraction ◽  
Freundlich Model ◽  
Hydroxymethyl Furfural ◽  
Before And After ◽  
Equilibrium Data ◽  
Best Fitting ◽  
Pseudo Second Order ◽  
Grafting From

This work investigates the application of 5-hydroxymethyl-furfural (HMF) as a grafting agent to chitosan (CS). The material produced was further modified by cross-linking. Three different derivatives were tested with molecular ratios CS/HMF of 1:1 (CS-HMF1), 2:1 (CS-HMF2) and 10:1 mol/mol (CS-HMF3)) to remove Cu2+ and Cd2+ from aqueous solutions. CS-HMF derivatives were characterized both before, and after, metal ions adsorption by using scanning electron microscopy (SEM), as well as Fourier-transform infrared (FTIR) spectroscopy thermogravimetric analysis (TGA), and X-Ray diffraction analysis (XRD). The CS-HMF derivatives were tested at pH = 5 and showed higher adsorption capacity with the increase of temperature. Also, the equilibrium data were fitted to Langmuir (best fitting) and Freundlich model, while the kinetic data to pseudo-first (best fitting) and pseudo-second order equations. The Langmuir model fitted better (higher R2) the equilibrium data than the Freundlich equation. By increasing the HMF grafting from 130% (CS-HMF1) to 310% (CS-HMF3), an increase of 24% (26 m/g) was observed for Cu2+ adsorption and 19% (20 mg/g) for Cd2+. By increasing from T = 25 to 65 °C, an increase of the adsorption capacity (metal uptake) was observed. Ten reuse cycles were successfully carried out without significant loss of adsorption ability. The reuse potential was higher of Cd2+, but more stable desorption reuse ability during all cycles for Cu2+.

scholarly journals Adsorption Evaluation for the Removal of Nickel, Mercury, and Barium Ions From Single-Component and Mixtures of Aqueous Solutions by Using an Optimized Biobased Chitosan Derivative

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 232
Author(s):  
Efstathios V. Liakos ◽  
Mariza Mone ◽  
Dimitra A. Lambropoulou ◽  
Dimitrios N. Bikiaris ◽  
George Z. Kyzas
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Single Component ◽  
Chitosan Derivative ◽  
Barium Ions ◽  
Hydroxymethyl Furfural ◽  
Before And After ◽  
Equilibrium Data ◽  
Best Fitting

In this experimental study, the use of 5-hydroxymethyl-furfural (HMF) organic compound as a grafting agent to chitosan natural polymer (CS) was examined. One optimized chitosan derivative was synthesized, and then tested (CS-HMF), in order to uptake nickel, mercury, and barium metal ions from single- and triple-component (multi-component) aqueous solutions. The characterization of the material before and after the metal uptake was achieved by scanning electron microscopy (SEM). The ability of the adsorption of CS-HMF was tested at pH = 6. The adjusting of temperature from 25 to 65 °C caused the increase in the adsorption capacity. The equilibrium data were fitted to the models of Langmuir and Freundlich, while the data from kinetic experiments were fitted to pseudo-1st and pseudo-2nd order models. The best fitting was achieved for the Langmuir model (higher R2). The adsorption capacity for nickel, mercury, and barium removal at 25 °C (single component) was 147, 107, and 64 (mg/g), respectively. However, the total adsorption capacity for the multi-component was 204 mg/g. A thermodynamic study was also done, and the values of ΔG0, ΔH0, and ΔS0 were evaluated.

Adsorption kinetics and thermodynamics of acid Bordeaux B from aqueous solution by graphene oxide/PAMAMs

2015 ◽  
Vol 72 (7) ◽  
pp. 1217-1225 ◽  
Author(s):  
Fan Zhang ◽  
Shengfu He ◽  
Chen Zhang ◽  
Zhiyuan Peng
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Freundlich Model ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Effects Of Media ◽  
Better Than

Graphene oxide/polyamidoamines dendrimers (GO/PAMAMs) composites were synthesized via modifying GO with 2.0 G PAMAM. The adsorption behavior of the GO/PAMAMs for acid Bordeaux B (ABB) was studied and the effects of media pH, adsorption time and initial ABB concentration on adsorption capacity of the adsorbent were investigated. The optimum pH value of the adsorption of ABB onto GO/PAMAMs was 2.5. The maximum adsorption capacity increased from 325.78 to 520.83 mg/g with the increase in temperature from 298 to 328 K. The equilibrium data followed the Langmuir isotherm model better than the Freundlich model. The kinetic study illustrated that the adsorption of ABB onto GO/PAMAMs fit the pseudo-second-order model. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

scholarly journals Adsorption of strontium on different sodium-enriched bentonites

2017 ◽  
Vol 82 (4) ◽  
pp. 449-463 ◽  
Author(s):  
Sanja Marinovic ◽  
Marija Ajdukovic ◽  
Natasa Jovic-Jovicic ◽  
Tihana Mudrinic ◽  
Bojana Nedic-Vasiljevic ◽  
...  
Keyword(s):  
Cation Exchange ◽  
Adsorption Capacity ◽  
Textural Properties ◽  
X Ray Diffraction ◽  
Order Model ◽  
Surface Areas ◽  
Alkaline Conditions ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ph Range

Bentonites from three different deposits (Wyoming, TX, USA and Bogovina, Serbia) with similar cation exchange capacities were sodium enriched and tested as adsorbents for Sr2+ in aqueous solutions. X-Ray diffraction analysis confirmed successful Na-exchange. The textural properties of the bentonite samples were determined using low-temperature the nitrogen physisorption method. Significant differences in the textural properties between the different sodium enriched bentonites were found. Adsorption was investigated with respect to adsorbent dosage, pH, contact time and the initial concentration of Sr2+. The adsorption capacity increased with pH. In the pH range from 4.0?8.5, the amount of adsorbed Sr2+ was almost constant but 2?3 times smaller than at pH ?11. Further experiments were performed at the unadjusted pH since extreme alkaline conditions are environmentally hostile and inapplicable in real systems. The adsorption capacity of all the investigated adsorbents toward Sr2+ was similar under the investigated conditions, regardless of significant differences in the specific surface areas. It was shown and confirmed by the Dubinin?Radushkevich model that the cation exchange mechanism was the dominant mechanism of Sr2+ adsorption. Their developed microporous structures contributed to the Sr2+ adsorption process. The adsorption kinetics obeyed the pseudo-second-order model. The isotherm data were best fitted with the Langmuir isotherm model.

Equilibrium and kinetic studies on biosorption of Pb(II) by common edible macrofungi: a comparative study

2016 ◽  
Vol 62 (4) ◽  
pp. 329-337 ◽  
Author(s):  
Yuan Jiang ◽  
Ruixia Hao ◽  
Shiqin Yang
Keyword(s):  
Kinetic Studies ◽  
Risk Level ◽  
Individual Species ◽  
Lead Removal ◽  
Freundlich Model ◽  
Hypsizygus Marmoreus ◽  
Agrocybe Cylindracea ◽  
Removal Capacity ◽  
Equilibrium Data ◽  
Pseudo Second Order

In this work, we studied the natural bioaccumulation and biosorption of Pb(II) in several common edible macrofungi. The macrofungi include the following species: Lentinus edodes, Pleurotus eryngii, Flammulina velutipes, Hypsizygus marmoreus, and Agrocybe cylindracea. The present analysis of Pb(II) revealed distinct capabilities of metal accumulation among individual species. Moreover, the natural concentrations of lead did not reach a health risk level when cultivated in uncontaminated soil. In the biosorption experiment by edible macrofungi, we found that the equilibrium data of living sporocarp (P. eryngii and H. marmoreus) and the homogenate of L. edodes and F. velutipes fit the Freundlich model well. Other data samples exhibited a better fit to the Langmuir model. The edible macrofungi showed a higher lead removal capacity than did other biosorbents. Furthermore, the pseudo-second-order kinetics model exhibited the best fit to the biosorption processes. The effectiveness of edible macrofungi as biosorbents for Pb(II) was confirmed.

Thermo-Kinetic Study of Adsorption of Methylene Blue in Aqueous Solutions Using Algerian Illite Natural and Activated Mineral Clay

2021 ◽  
Vol 406 ◽  
pp. 348-363
Author(s):  
Larbi Haddad ◽  
Abdelkader Hima ◽  
Belkhir Dadamoussa ◽  
Asma Messai Aoun
Keyword(s):  
Methylene Blue ◽  
Specific Area ◽  
Experimental Results ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
Isotherm Equation ◽  
Langmuir Isotherm Equation ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Two Stages

In this study, a local mineral clay was used as an adsorbent for the elimination of a cationic dye: methylene blue (MB), in an aqueous solution by adsorption technique. Early on, we performed mineralogical and textural analyses of a clay sample using various techniques, namely X-ray diffraction, Brunauer-Emmett-Teller analysis and Fourier-transform infrared spectroscopy. The experimental results showed that this adsorbent is a mesoporous and non-swelling clay with illite and kaolinite as the major components with a specific area of about 110m2/g. The study of MB adsorption on the clay was carried out by optimizing the conditions of adsorption, notably the initial concentration of pollutant C0, the mass of clay m, the contact time t, the potential of hydrogen of the solution pH and the temperature T. Experimental results have shown that the equilibrium data are well adjusted by a Langmuir isotherm equation. Thermodynamic parameters such as the changes in Gibbs free energy, enthalpy, and entropy were determined from batch experiments. Results revealed that the adsorption of MB onto illitic clay was endothermic and spontaneous process. Kinetic modeling was also carried out. Experimental data adjusted the kinetic model of pseudo-second order with two stages of intraparticle diffusion.

scholarly journals Enhanced removal of hexavalent chromium by different acid-modified biochar derived from corn straw: behavior and mechanism

2020 ◽  
Vol 81 (10) ◽  
pp. 2270-2280
Author(s):  
Yonggang Xu ◽  
Tianxia Bai ◽  
Yubo Yan ◽  
Yunfeng Zhao ◽  
Ling Yuan ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Hydrogen Ion ◽  
Corn Straw ◽  
Order Model ◽  
Freundlich Model ◽  
X Ray ◽  
Modified Biochar ◽  
Before And After ◽  
Pseudo Second Order ◽  
Kinetics Of

Abstract It is of great significance to remove Cr(VI) from water as a result of its high toxicity. Biochar from corn straw was modified by different acids (HNO3, H2SO4 and H3PO4) to remove Cr(VI) from aqueous solution. To estimate the removal mechanisms of Cr(VI) by the acid-modified biochars, batch experiments were performed in the light of contact time, Cr(VI) concentration, and pH, and the characteristics of acid-modified biochars before and after Cr(VI) adsorption were investigated by Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS). The adsorption kinetics of Cr(VI) by acid-modified biochars were consistent with the pseudo-second-order model, and the adsorption isotherm obeyed the Freundlich model. Furthermore, the acid- modified biochars could supply more oxygen-containing functional groups (-COOH and -OH) as electron donor (e−) and hydrogen ion (H+) to enhance the reduction of Cr(VI) to Cr(III), resulting in enhanced removal of Cr(VI). HNO3-modified biochar exhibited the highest removal efficiency of Cr(VI). In general, the acid modifition of biochar was an effective method to increase the removal of Cr(VI).

Adsorption kinetics and isotherm of vanadium with melamine

2017 ◽  
Vol 75 (10) ◽  
pp. 2316-2321 ◽  
Author(s):  
Hao Peng ◽  
Zuohua Liu ◽  
Changyuan Tao
Keyword(s):  
Adsorption Kinetics ◽  
Impact Factors ◽  
Order Kinetic ◽  
Freundlich Model ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorption Kinetics And Isotherm ◽  
Langmuir And Freundlich Models

Melamine, possessing three free amino groups and three aromatic nitrogen atoms in its molecule, has great potential as an adsorbent for metal ions. We investigated three impact factors of the adsorption process: the initial pH of the vanadium solution, contact time and reaction temperature. The adsorption kinetics could be accurately described by the pseudo-second-order kinetic model. Langmuir and Freundlich models fitted well with the experimental equilibrium data, and the maximal adsorption capacity was found to be 1,428.57 mg vanadium/g melamine, and the Freundlich model showed the adsorption is privilege type.

Synthesis of SBA-15 under Normal Pressure by Microwave Irradiation Method for Adsorption of Pb(II) in Environment

2010 ◽  
Vol 113-116 ◽  
pp. 775-779 ◽  
Author(s):  
Yan Liu ◽  
Yun Wang ◽  
Xiao Jie Zhang ◽  
Ji Min Xie ◽  
Yong Sheng Yan
Keyword(s):  
Microwave Irradiation ◽  
River Sediments ◽  
Textural Properties ◽  
Nitrogen Adsorption ◽  
Normal Pressure ◽  
X Ray Diffraction ◽  
Microwave Irradiation Method ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Desorption

Mesoporous silica SBA-15 has been prepared rapidly under normal pressure by microwave irradiation method. The textural properties were studied by low-angle X-ray diffraction (XRD) and nitrogen adsorption-desorption. The optimum adsorption conditions of Pb(Ⅱ) on SBA-15 was investigated. The results show that the adsorption kinetics follows a pseudo-second-order rate model and the experimental equilibrium data is fitted well by Langmuir adsorption isotherm. The adsorption capacity reaches 50.10 mg•g-1 which is much higher than that of hydrothermal synthesized samples. This adsorbent has been applied in the determination of Pb(Ⅱ) in river sediments samples.

scholarly journals Self-Regeneration Hybrid Hydrogel for Bisphenol A Adsorption in Water

2021 ◽  
Author(s):  
Mingyue Piao ◽  
Hongxue Du ◽  
Yuwei Sun ◽  
Honghui Teng
Keyword(s):  
Bisphenol A ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Significant Loss ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Hybrid Hydrogel ◽  
Polyethylene Glycol Diacrylate ◽  
Glycol Diacrylate ◽  
Pseudo Second Order

Abstract Hybrid hydrogel was synthesized by immobilizing TiO2 in polyethylene glycol diacrylate (TiO2@PEGDA) as an efficient adsorbent with photocatalysis property for bisphenol A (BPA) elimination. TiO2@PEGDA exhibited spherical and rough structure with limited crystallinity and abundant functional groups. The contact angle was 61.96°, indicating that TiO2@PEGDA is hydrophilic. The swelling capacity of TiO2@PEGDA (9.0%) was decreased compared with pristine PEGDA (15.6%). Adsorption results demonstrated that the maximum adsorption capacity of TiO2@PEGDA (101.4 mg/g) for BPA was slightly higher than pristine PEGDA (97.68 mg/g). The adsorption capacity was independent with pH at pH ＜ 8.0, and decreased obviously when the value of pH was higher than 8.0. The adsorption behavior was fitted well with the pseudo-second-order kinetic and the Freundlich isotherm model. Both ΔG0 and ΔH0 were negative, indicating that BPA adsorbed on TiO2@PEGDA was an exothermic and spontaneous process. Regeneration study was performed by photocatalysis, and the adsorption capacity was 85.6% compared with the initial capacity after four cycles of illumination, indicating that TiO2@PEGDA could be recycled without significant loss of adsorption capacity. Consequently, TiO2@PEGDA can serve as an eco-friendly and promising material for efficiently adsorbing BPA with self-clean property.

Sign in / Sign up

Export Citation Format

Share Document