Adsorption kinetics and isotherm of vanadium with melamine

2017 ◽  
Vol 75 (10) ◽  
pp. 2316-2321 ◽  
Author(s):  
Hao Peng ◽  
Zuohua Liu ◽  
Changyuan Tao
Keyword(s):  
Adsorption Kinetics ◽  
Impact Factors ◽  
Order Kinetic ◽  
Freundlich Model ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorption Kinetics And Isotherm ◽  
Langmuir And Freundlich Models

Melamine, possessing three free amino groups and three aromatic nitrogen atoms in its molecule, has great potential as an adsorbent for metal ions. We investigated three impact factors of the adsorption process: the initial pH of the vanadium solution, contact time and reaction temperature. The adsorption kinetics could be accurately described by the pseudo-second-order kinetic model. Langmuir and Freundlich models fitted well with the experimental equilibrium data, and the maximal adsorption capacity was found to be 1,428.57 mg vanadium/g melamine, and the Freundlich model showed the adsorption is privilege type.

scholarly journals Adsorption performance of Cd(II), Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by aminated solution-blown polyacrylonitrile micro/nanofibers

2018 ◽  
Vol 2017 (2) ◽  
pp. 378-389 ◽  
Author(s):  
Huiqing Lou ◽  
Xianzhong Cao ◽  
Xin Yan ◽  
Lina Wang ◽  
Zengbin Chen
Keyword(s):  
Hydroxylamine Hydrochloride ◽  
Order Kinetic ◽  
Adsorption Performance ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Pan Fibers

Abstract In this work, we prepared amidoxime-functionalized polyacrylonitrile (APAN) micro/nanofibers by modifying solution-blown PAN fibers with hydroxylamine hydrochloride, and investigated the adsorption performance of the APAN fibers for Cd(II), Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) from aqueous solutions. Batch experiments and quantitative analysis were conducted considering initial pH and contact time as controlling parameters. The equilibrium data were better explained by the Langmuir model with maximum adsorption capacities of 185, 204, 105, 104, 345 and 91 mg/g for Cd(II), Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The adsorption kinetics were found to follow the pseudo-second-order kinetic model. The calculated thermodynamic parameters demonstrated that the adsorption of metal ions onto APAN fibers is feasible, spontaneous and endothermic. The five adsorption–desorption cycle experiments showed that APAN micro/nanofiber adsorbent exhibits good reusability, and has a potential application for the removal of heavy metals from wastewater.

Removal of Heavy Metals Cd(II) and Al(III) from Aqueous Solutions by an Eco-Friendly Biosorbent

2019 ◽  
Vol 800 ◽  
pp. 181-186 ◽  
Author(s):  
Nour El Houda Larbi ◽  
Djilali Redha Merouani ◽  
Hakim Aguedal ◽  
Abdelkader Iddou ◽  
Amine Khelifa
Keyword(s):  
Heavy Metals ◽  
Aqueous Solutions ◽  
Order Kinetic ◽  
Human Beings ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Water Pollutant ◽  
Langmuir And Freundlich Models

Heavy metals are very toxic water pollutant. Their presence not only affect human beings but also animals and vegetation because of their mobility in aqueous ecosystem, toxicity and non-biodegradability [1].in the aim of removing heavy metals from aqueous solutions, an eco-friendly biosorbent was prepared from lagoon sludge by a humification process. The biosorption of Cd2+ and Al3+ ions from aqueous solutions was investigated as a function of initial pH,contact time, initial metal ions concentration, and temperature. Langmuir and Freundlich models were used to determine the sorption isotherm. Optimum pH for the removal of cadmium and aluminum was found respectively to be around 6 and 4 [2] . The equilibrium was obtained in 60 min with the pseudo-second-order kinetic model. The Langmuir model was a better fit with the experimental data for both cadmium and aluminum adsorption with a regression coefficient up to 0.99 and Qmax of 100 and 142 mg.g-1 respectively for Cd2+and Al3+.

scholarly journals Effective adsorption of direct Red 23 by sludge biochar-based adsorbent: adsorption kinetics, thermodynamics and mechanisms study

2021 ◽  
Author(s):  
Ruqing Jiang ◽  
Guangwei Yu ◽  
Pamphile Ndagijimana ◽  
Yu Wang ◽  
Futian You ◽  
...  
Keyword(s):  
Adsorption Kinetics ◽  
Electrostatic Interactions ◽  
Removal Rate ◽  
Order Kinetic ◽  
Solution Ph ◽  
Adsorption Mechanisms ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Solid Adsorbents ◽  
Pseudo Second Order

Abstract Using solid adsorbents, such as biochar, has been a potential practice to remove the pollutants from water bodies to render the water safer for potential usage. A potential application of sludge biochar-based adsorbent (SBA) obtained by pyrolysis with hydrothermal treatment was developed to adsorb Direct Red 23 (DR23) from wastewater. The results showed that the synthesized SBA (0.5 g/L) in the adsorption of DR23 at low concentration (<20 mg/L), the DR23 were totally removed from the aqueous solution. PH had a limited effect on the adsorption, while an increase in temperature was shown to have a large enhancing effect. The adsorption kinetics were the best fit by the pseudo-second-order kinetic model, while the equilibrium data were best fitted by the Langmuir isotherm. A maximum saturation adsorption capacity of SBA of 111.98 mg/g was achieved. SBA could then be regenerated by pyrolysis, and after three cycles, SBA still retained the good adsorption ability of DR23, a removal rate exceeding 97% was achieved. Functional groups, pores, π-π bond, and electrostatic interactions are the key to the adsorption mechanisms. The results proved that SBA would be a promising material in the removal application of dyes in printing and dyeing wastewater.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

scholarly journals The sorption of inorganic arsenic on modified sepiolite: Effect of hydrated iron(III)-oxide

2014 ◽  
Vol 79 (7) ◽  
pp. 815-828 ◽  
Author(s):  
Nikola Ilic ◽  
Slavica Lazarevic ◽  
Vladana Rajakovic-Ognjanovic ◽  
Ljubinka Rajakovic ◽  
Djordje Janackovic ◽  
...  
Keyword(s):  
Sorption Capacity ◽  
Arsenic Removal ◽  
Ph Value ◽  
Inorganic Arsenic ◽  
Arsenic Species ◽  
Deionized Water ◽  
Order Kinetic ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of inorganic arsenic species, As(III) and As(V), from water by sepiolite modified with hydrated iron(III) oxide was investigated at 25 ?C through batch studies. The influence of the initial pH value, the initial As concentrations, the contact time and types of water on the sorption capacity was investigated. Two types of water were used, deionized and groundwater. The maximal sorption capacity for As(III) from deionized water was observed at initial and final pH value 7.0, while the bonding of As(V) was observed to be almost pH independent for pH value in the range from 2.0 to 7.0, and the significant decrease in the sorption capacity was observed at pH values above 7.0. The sorption capacity at initial pH 7.0 was about 10 mg g?1 for As(III) and 4.2 mg g?1 for As(V) in deionized water. The capacity in groundwater was decreased by 40 % for As(III) and by 20 % for As(V). The Langmuir model and pseudo-second order kinetic model revealed good agreement with the experimental results. The results show that Fe(III)-modified sepiolite exhibits significant affinity for arsenic removal and it has a potential for the application in water purification processes.

Studies of Chromium Removal from Tannery Effluents by Dead Streptomyces Rimosus

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Mohamed Nasser Sahmoune ◽  
Krim Louhab ◽  
Aissa Boukhiar
Keyword(s):  
Fractional Power ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Streptomyces Rimosus ◽  
Tannery Effluents ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Dead streptomyces rimosus was found to be an effective biosorbent for the removal of chromium from industrial tanning effluents. A sorption level of 65 mg/g was observed at pH 4.8 while the precipitation effect augmented this value at a higher pH range. Chromium desorption increased with decreasing desorption agents pH (including HCl and H2SO4) to a maximum value of 95% at approximately zero pH. The biosorption data of trivalent chromium by streptomyces rimosus has been used for kinetic studies based on fractional power, Elovich, pseudo-first order and pseudo-second order rate expressions. The time-dependent Cr (III) biosorption data were well-described by a pseudo-second-order kinetic model. The intraparticle diffusion is not the rate-limiting step for the whole reaction. It was found that the biosorption equilibrium data fit well with the Langmuir model.

Adsorption of Chromium (VI) from Aqueous Solution by Agricultural Waste Derived Activated Carbon

2013 ◽  
Vol 726-731 ◽  
pp. 2100-2106 ◽  
Author(s):  
Hua Zhang ◽  
Xue Hong Zhang ◽  
Yi Nian Zhu ◽  
Shou Rui Yuan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Agricultural Waste ◽  
Order Kinetic ◽  
Chromium Vi ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Grapefruit Peel ◽  
Pseudo Second Order ◽  
C 30

Activated carbon prepared from grapefruit peel, an agricultural solid waste by-product, has been used for the adsorption of Cr(VI) from aqueous solution. The effects of adsorbent dosage, pH and temperature on adsorption of Cr(VI) were investigated. The maximum adsorption yield was obtained at the initial pH of 3. The dynamical data fit very well with the pseudo-second-order kinetic model and the calculated adsorption capacities (23.98, 24.33 and 24.81 mg/g) were in good agreement with experiment results at 20°C, 30°C and 40 °C for the 100 mg/L Cr(VI) solution. The Freundlich model (R2 values were 0.9198-0.9871) fitted adsorption data better than the Langmuir model. The calculated parameters confirmed the favorable adsorption of Cr(VI) on the activated carbon prepared from grapefruit peel.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

Biosorption of hexavalent chromium from aqueous solution by polyethyleneimine-modified ultrasonic-assisted acid hydrochar from Sargassum horneri

2020 ◽  
Vol 81 (6) ◽  
pp. 1114-1129 ◽  
Author(s):  
Jun Wang ◽  
Qinglong Xie ◽  
Ao Li ◽  
Xuejun Liu ◽  
Fengwen Yu ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Crosslinking Reaction ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Initial Ph ◽  
Ultrasonic Assisted ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, an efficient route to synthesizing polyethyleneimine-modified ultrasonic-assisted acid hydrochar (PEI-USAH) is developed and reported. Ultrasonic irradiation technique was used as surface modification method to shorten the crosslinking reaction for hydrochar and polyethyleneimine (PEI). The PEI-USAH showed an excellent adsorption capacity for Cr(VI) from aqueous solution. The physicochemical properties of this PEI-modified adsorbent were comparatively characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer–Emmett–Teller analysis and CNHS analysis. The effects of contact time, initial pH, and biosorbent dose on adsorption capacities were investigated. The batch adsorption experiments showed that PEI-USAH possessed the maximum adsorption capacities of 94.38 mg/g and 330.84 mg/g for initial Cr(VI) concentration of 100 mg/L and 500 mg/L, respectively. Furthermore, this adsorption process could be fitted to Langmuir adsorption and described by the pseudo second order kinetic model. Based on the above findings, PEI-USAH could be used as a potential adsorbent for removal of Cr(VI) from wastewater.

scholarly journals Removal of Lead(II) from Synthetic Wastewater by Lavandula pubescens Decne Biosorbent: Insight into Composition–Adsorption Relationship

2020 ◽  
Vol 10 (21) ◽  
pp. 7450
Author(s):  
Ali Q. Alorabi ◽  
Fahad A. Alharthi ◽  
Mohamed Azizi ◽  
Nabil Al-Zaqri ◽  
Adel El-Marghany ◽  
...  
Keyword(s):  
Ion Concentration ◽  
Wild Plant ◽  
Synthetic Wastewater ◽  
Gas Chromatography Mass Spectrometry ◽  
Gas Liquid Chromatography ◽  
Order Kinetic ◽  
Freundlich Model ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Best Fit

In this work, the widely-abundant, cheap, wild plant Lavandula pubescens Decne was evaluated as an adsorbent for removing Pb(II) ions from wastewater. The chemical composition of the plant was partially isolated and characterized by the corresponding techniques, including gas chromatography–mass spectrometry, gas liquid chromatography, and FTIR spectroscopy. The adsorption capacity of the dried plant material for Pb(II) ions increased with increasing contact time, initial ion concentration, and temperature, while it decreased with increasing adsorbent dosage. The optimum condition for Pb(II) adsorption was determined as 550 mg/L initial metal concentration, pH ≤ 7, and 90 min of contact. The best fit for Pb(II) adsorption isotherms was the linear form of the Freundlich model; however, the maximum capacity indicated by Langmuir was 91.32 mg/g. The experimental data fit better the pseudo-second-order kinetic model (R2 = 0.969), suggesting chemisorption process. Thermodynamic data revealed an endothermic, nonspontaneous, and adsorption process favored at higher concentrations.

Sign in / Sign up

Export Citation Format

Share Document