scholarly journals Dynamic Mussel-Inspired Chitin Nanocomposite Hydrogels for Wearable Strain Sensors

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1416 ◽  
Author(s):  
Pejman Heidarian ◽  
Abbas Z. Kouzani ◽  
Akif Kaynak ◽  
Ali Zolfagharian ◽  
Hossein Yousefi
Keyword(s):  
Mechanical Properties ◽  
Polyacrylic Acid ◽  
Strain Sensors ◽  
Self Healing ◽  
Network Stability ◽  
Ferric Ions ◽  
Trade Off ◽  
Nanocomposite Hydrogels ◽  
Healing Efficiency ◽  
Hydrogel Network

It is an ongoing challenge to fabricate an electroconductive and tough hydrogel with autonomous self-healing and self-recovery (SELF) for wearable strain sensors. Current electroconductive hydrogels often show a trade-off between static crosslinks for mechanical strength and dynamic crosslinks for SELF properties. In this work, a facile procedure was developed to synthesize a dynamic electroconductive hydrogel with excellent SELF and mechanical properties from starch/polyacrylic acid (St/PAA) by simply loading ferric ions (Fe3+) and tannic acid-coated chitin nanofibers (TA-ChNFs) into the hydrogel network. Based on our findings, the highest toughness was observed for the 1 wt.% TA-ChNF-reinforced hydrogel (1.43 MJ/m3), which is 10.5-fold higher than the unreinforced counterpart. Moreover, the 1 wt.% TA-ChNF-reinforced hydrogel showed the highest resistance against crack propagation and a 96.5% healing efficiency after 40 min. Therefore, it was chosen as the optimized hydrogel to pursue the remaining experiments. Due to its unique SELF performance, network stability, superior mechanical, and self-adhesiveness properties, this hydrogel demonstrates potential for applications in self-wearable strain sensors.

scholarly journals Highly Viscoelastic, Stretchable, Conductive, and Self-Healing Strain Sensors based on Cellulose Nanofibers-Reinforced Polyacrylic Acid Hydrogel

2021 ◽  
Author(s):  
Yue Jiao ◽  
Kaiyue Lu ◽  
Ya Lu ◽  
Yiying Yue ◽  
Xinwu Xu ◽  
...  
Keyword(s):  
Polyacrylic Acid ◽  
Cellulose Nanofibers ◽  
Strain Sensors ◽  
Self Healing ◽  
Wearable Electronics ◽  
Chemically Modified ◽  
Mechanical And Electrical Properties ◽  
Healing Efficiency ◽  
Hydrogel Matrix ◽  
External Stimuli

Abstract Conductive and self-healing hydrogels are among the emerging materials that mimic the human skin and are important due to their probable prospects in soft robots and wearable electronics. However, the mechanical properties of the hydrogel matrix limit their applications. In this study, we developed a physicochemically dual cross-linked chemically modified-cellulose nanofibers-carbon nanotubes/polyacrylic acid (TOCNF-CNTs/PAA) hydrogel. The TOCNFs acted both as a nanofiller and dispersant to increase the mechanical strength of the PAA matrix and break the agglomerates of the CNTs. The final self-healing and conductive TOCNF-CNTs/PAA-0.7 (mass ratio of CNTs to AA) hydrogel with a uniform texture exhibited highly intrinsic stretchability (breaking elongation to ca. 850%), enhanced tensile properties (ca. 59kPa), ideal conductivity (ca. 2.88S·m− 1) and pressure sensitivity. Besides, the composite hydrogels achieved up to approximately 98.36% and 99.99% self-healing efficiency for mechanical and electrical properties, respectively, without any external stimuli. Therefore, the as-designed multi-functional self-healing hydrogels, combined with stretching, sensitivity, and repeatability, possess the ability to monitor human activity and develop multifunctional, advanced, and commercial products such as wearable strain sensors, health monitors, and smart robots.

scholarly journals Dynamic Nanohybrid-Polysaccharide Hydrogels for Soft Wearable Strain Sensing

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3574
Author(s):  
Pejman Heidarian ◽  
Hossein Yousefi ◽  
Akif Kaynak ◽  
Mariana Paulino ◽  
Saleh Gharaie ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Strain Sensors ◽  
Self Healing ◽  
Nano Materials ◽  
Strain Sensing ◽  
Ferric Ions ◽  
Research Activity ◽  
Adhesion Properties ◽  
High Mechanical Strength ◽  
The Moment

Electroconductive hydrogels with stimuli-free self-healing and self-recovery (SELF) properties and high mechanical strength for wearable strain sensors is an area of intensive research activity at the moment. Most electroconductive hydrogels, however, consist of static bonds for mechanical strength and dynamic bonds for SELF performance, presenting a challenge to improve both properties into one single hydrogel. An alternative strategy to successfully incorporate both properties into one system is via the use of stiff or rigid, yet dynamic nano-materials. In this work, a nano-hybrid modifier derived from nano-chitin coated with ferric ions and tannic acid (TA/Fe@ChNFs) is blended into a starch/polyvinyl alcohol/polyacrylic acid (St/PVA/PAA) hydrogel. It is hypothesized that the TA/Fe@ChNFs nanohybrid imparts both mechanical strength and stimuli-free SELF properties to the hydrogel via dynamic catecholato-metal coordination bonds. Additionally, the catechol groups of TA provide mussel-inspired adhesion properties to the hydrogel. Due to its electroconductivity, toughness, stimuli-free SELF properties, and self-adhesiveness, a prototype soft wearable strain sensor is created using this hydrogel and subsequently tested.

Highly viscoelastic, stretchable, conductive, and self-healing strain sensors based on cellulose nanofiber-reinforced polyacrylic acid hydrogel

Cellulose ◽  
2021 ◽  
Vol 28 (7) ◽  
pp. 4295-4311
Author(s):  
Yue Jiao ◽  
Kaiyue Lu ◽  
Ya Lu ◽  
Yiying Yue ◽  
Xinwu Xu ◽  
...  
Keyword(s):  
Polyacrylic Acid ◽  
Strain Sensors ◽  
Cellulose Nanofiber ◽  
Self Healing

scholarly journals Recyclable Self-Healing Polyurethane Cross-Linked by Alkyl Diselenide with Enhanced Mechanical Properties

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 773 ◽  
Author(s):  
Yuqing Qian ◽  
Xiaowei An ◽  
Xiaofei Huang ◽  
Xiangqiang Pan ◽  
Jian Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Room Temperature ◽  
Amide Bond ◽  
Self Healing ◽  
Healing Efficiency ◽  
Polyurethane Networks ◽  
Combined Action ◽  
Cross Linker ◽  
Dynamic Structures ◽  
External Interventions

Dynamic structures containing polymers can behave as thermosets at room temperature while maintaining good mechanical properties, showing good reprocessability, repairability, and recyclability. In this work, alkyl diselenide is effectively used as a dynamic cross-linker for the design of self-healing poly(urea–urethane) elastomers, which show quantitative healing efficiency at room temperature, without the need for any catalysts or external interventions. Due to the combined action of the urea bond and amide bond, the material has better mechanical properties. We also compared the self-healing effect of alkyl diselenide-based polyurethanes and alkyl disulfide-based polyurethanes. The alkyl diselenide has been incorporated into polyurethane networks using a para-substituted amine diphenyl alkyl diselenide. The resulting materials not only exhibit faster self-healing properties than the corresponding disulfide-based materials, but also show the ability to be processed at temperatures as low as 60 °C.

scholarly journals Numerical Studies of the Effects of Water Capsules on Self-Healing Efficiency and Mechanical Properties in Cementitious Materials

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Haoliang Huang ◽  
Guang Ye
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Cementitious Materials ◽  
Self Healing ◽  
Negative Effects ◽  
Numerical Studies ◽  
Healing Efficiency ◽  
The Impact ◽  
Positive Effect

In this research, self-healing due to further hydration of unhydrated cement particles is taken as an example for investigating the effects of capsules on the self-healing efficiency and mechanical properties of cementitious materials. The efficiency of supply of water by using capsules as a function of capsule dosages and sizes was determined numerically. By knowing the amount of water supplied via capsules, the efficiency of self-healing due to further hydration of unhydrated cement was quantified. In addition, the impact of capsules on mechanical properties was investigated numerically. The amount of released water increases with the dosage of capsules at different slops as the size of capsules varies. Concerning the best efficiency of self-healing, the optimizing size of capsules is 6.5 mm for capsule dosages of 3%, 5%, and 7%, respectively. Both elastic modulus and tensile strength of cementitious materials decrease with the increase of capsule. The decreasing tendency of tensile strength is larger than that of elastic modulus. However, it was found that the increase of positive effect (the capacity of inducing self-healing) of capsules is larger than that of negative effects (decreasing mechanical properties) when the dosage of capsules increases.

Adaptable Eu-containing polymeric films with dynamic control of mechanical properties in response to moisture

Soft Matter ◽  
2020 ◽  
Vol 16 (9) ◽  
pp. 2276-2284 ◽  
Author(s):  
Zichao Wei ◽  
Srinivas Thanneeru ◽  
Elena Margaret Rodriguez ◽  
Gengsheng Weng ◽  
Jie He
Keyword(s):  
Mechanical Properties ◽  
Optical Properties ◽  
Polymer Films ◽  
Dynamic Control ◽  
Polymeric Films ◽  
Self Healing ◽  
Healing Efficiency

Moisture that competes with dipicolylamine to bind Eu dynamically controls the mechanical and optical properties of polymer films, as well as their self-healing efficiency.

Tough but self-healing and 3D printable hydrogels for E-skin, E-noses and laser controlled actuators

2019 ◽  
Vol 7 (43) ◽  
pp. 24814-24829 ◽  
Author(s):  
Yitian Wang ◽  
Qiang Chang ◽  
Rixing Zhan ◽  
Kaige Xu ◽  
Ying Wang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Mechanical Strength ◽  
Polyacrylic Acid ◽  
Self Healing ◽  
Healing Efficiency ◽  
Physically Crosslinked

A versatile hydrogel with extraordinary mechanical strength and self-healing efficiency was developed by integrating physically crosslinked graphene oxide into a chemically crosslinked polyacrylic acid network.

Soluble Silicates as Additives for Self-Sealing and Self-Healing Concrete

2016 ◽  
Vol 1813 ◽  
Author(s):  
L. E. Rendon Diaz Miron ◽  
M. E. Lara Magaña
Keyword(s):  
Mechanical Properties ◽  
Crack Formation ◽  
Healing Process ◽  
Self Healing ◽  
Reaction Products ◽  
Calcium Carbonate Precipitation ◽  
Broad Perspective ◽  
Healing Efficiency ◽  
Tensile Forces ◽  
Solubility Ratio

ABSTRACTTensile strength of concrete is limited and therefore is sensitive to crack formation. Steel reinforcement is added to bear the tensile forces; nonetheless, this does not completely omit crack formation. Repair of cracks in concrete is time-consuming and expensive. Self-sealing and self-healing of cracks upon appearance would therefore be a convenient property. We propose a mechanism to obtain self-repair of the concrete by adding soluble silicates (ASS) which will induce a self-sealing and self-healing process catalyzed by natural periods of wet and dry states of the concrete. Self-sealing approaches prevent the ingress of harsh chemical substances which may deteriorate the concrete matrix. This can be achieved by self-healing of concrete cracks (e.g. further cement hydration, calcium carbonate precipitation) and autonomous healing (e.g. further hydration of partially soluble silicates added as healing agents). The autogenous healing efficiency depends on the amount of deposited reaction products (ASS), its solubility (ratio of calcium to sodium silicate), the availability of water, and the crack width (restricted by adding microfibers). The self-sealing efficiency is generally evaluated by measuring the decrease in water permeability and air flow through the crack. The healing efficiency is usually evaluated by testing concrete´s regain in mechanical properties after crack formation; by reloading the cracked and autonomously healed specimen and comparing the obtained mechanical properties with the original ones. Self-sealing and self-healing of concrete gives a broad perspective and new possibilities to make future concrete structures more durable.

scholarly journals Impact of Bio-Carrier Immobilized with Marine Bacteria on Self-Healing Performance of Cement-Based Materials

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4164 ◽  
Author(s):  
Hayeon Kim ◽  
Hyeongmin Son ◽  
Joonho Seo ◽  
H. K. Lee
Keyword(s):  
Mechanical Properties ◽  
Mercury Intrusion Porosimetry ◽  
Tap Water ◽  
Bottom Ash ◽  
Self Healing ◽  
Mixing Process ◽  
Mercury Intrusion ◽  
Healing Efficiency ◽  
Cement Based Materials ◽  
Healing Agent

The present study evaluated the self-healing efficiency and mechanical properties of mortar specimens incorporating a bio-carrier as a self-healing agent. The bio-carrier was produced by immobilizing ureolytic bacteria isolated from seawater in bottom ash, followed by surface coating with cement powder to prevent loss of nutrients during the mixing process. Five types of specimens were prepared with two methods of incorporating bacteria, and were water cured for 28 days. To investigate the healing ratio, the specimens with predefined cracks were treated by applying a wet–dry cycle in three different conditions, i.e., seawater, tap water, and air for 28 days. In addition, a compression test and a mercury intrusion porosimetry analysis of the specimens were performed to evaluate their physico-mechanical properties. The obtained results showed that the specimen incorporating the bio-carrier had higher compressive strength than the specimen incorporating vegetative cells. Furthermore, the highest healing ratio was observed in specimens incorporating the bio-carrier. This phenomenon could be ascribed by the enhanced bacterial viability by the bio-carrier.

Sign in / Sign up

Export Citation Format

Share Document