scholarly journals Influence of Different Percentages of Binders on the Physico-Mechanical Properties of Rhizophora spp. Particleboard as Natural-Based Tissue-Equivalent Phantom for Radiation Dosimetry Applications

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1868
Author(s):  
Siti Hajar Zuber ◽  
Nurul Ab. Aziz Hashikin ◽  
Mohd Fahmi Mohd Yusof ◽  
Mohd Zahri Abdul Aziz ◽  
Rokiah Hashim
Keyword(s):  
Mechanical Properties ◽  
Radiation Dosimetry ◽  
Structural Integrity ◽  
Soy Flour ◽  
Lower Percentage ◽  
Internal Bonding ◽  
X Ray ◽  
Tissue Equivalent ◽  
Tissue Equivalent Phantom ◽  
Edx Analyses

Rhizophora spp. particleboard with the incorporation of lignin and soy flour as binders were fabricated and the influence of different percentages of lignin and soy flour (0%, 6% and 12%) on the physico-mechanical properties of the particleboard were studied. The samples were characterised by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray fluorescence (XRF) and internal bonding. The results stipulated that the addition of binders in the fabrication of the particleboard did not change the functional groups according to the FTIR spectrum. For XRD, addition of binders did not reveal any major transformation within the composites. SEM and EDX analyses for all percentages of binders added showed no apparent disparity; however, it is important to note that the incorporation of binders allows better bonding between the molecules. In XRF analysis, lower percentage of chlorine in the adhesive-bonded samples may be advantageous in maintaining the natural properties of the particleboard. In internal bonding, increased internal bond strength in samples with binders may indicate better structural integrity and physico-mechanical strength. In conclusion, the incorporation of lignin and soy flour as binders may potentially strengthen and fortify the particleboard, thus, can be a reliable phantom in radiation dosimetry applications.

scholarly journals Physical and mechanical properties of soy-lignin bonded Rhizophora spp. particleboard as a tissue-equivalent phantom material

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 5558-5576 ◽  
Author(s):  
Siti Hajar Zuber ◽  
Nurul Ab. Aziz Hashikin ◽  
Mohd Fahmi Mohd Yusof ◽  
Rokiah Hashim
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Soy Flour ◽  
Modulus Of Rupture ◽  
Thickness Swelling ◽  
Sem Images ◽  
Hygroscopic Properties ◽  
Tissue Equivalent ◽  
Tissue Equivalent Phantom ◽  
Phantom Material

Experimental binderless and adhesive-bonded particleboards were made from three different sample sizes, 0 to 103 µm, 104 to 210 µm, and 211 to 500 µm from Rhizophora spp. wood trunk at 1.0 g cm-3. The objective was to evaluate the physical and mechanical properties of the particleboards. The binderless and soy-lignin bonded particleboards were fabricated and studied based on the density, internal bonding, modulus of rupture, water absorption, and thickness swelling. Microstructure study using scanning electron microscopy (SEM) and elemental analysis by carbon hydrogen nitrogen (CHN) analyser were also performed. Particleboards with adhesives improved the internal bond strength. Smaller particle sizes also were shown to be able to improve the thickness swelling outcomes, with lower hygroscopic properties. The SEM images showed that smaller particle size allowed better bonding with adhesives and provided superior strength in the fabrication of tissue equivalent phantom material. The CHN ratio demonstrated by soy flour and lignin revealed no major difference when compared with the Rhizophora spp. samples, showing basic chemical composition of natural adhesives, which was crucial in the fabrication of tissue-mimicking phantom. The study revealed the potential of soy flour and lignin as adhesives for the fabrication of Rhizophora spp. particleboard as a tissue equivalent phantom material.

Radiation Exposure of Medical Personnel Accompanying the Patient during the Procedure of Superficial X-Ray Therapy of Children

2019 ◽  
Vol 64 (5) ◽  
pp. 54-57
Author(s):  
С. Смолин ◽  
S. Smolin
Keyword(s):  
Radiation Exposure ◽  
Effective Dose ◽  
Dose Rate ◽  
Medical Personnel ◽  
X Rays ◽  
X Ray ◽  
Treatment Room ◽  
Tissue Equivalent ◽  
Tissue Equivalent Phantom ◽  
Irradiation Process

Purpose: Assessment the radiation situation in the treatment room of superficial x-ray therapy during the irradiation process in order to inform about radiation exposure of medical personnel or a relatives. Material and methods: In the course of the study, a procedure of superficial radiotherapy was simulated using a tissue equivalent phantom with sizes 250×250×150 mm. The radiation control protocol of measurements on the Roentgen TA-02 apparatus was compiled on the basis of SanPiN 2.6.1.1192-03. With the help of a clinical dosimeter DKS-AT1123, the ambient dose-rate of short-term x-rays was measured. In accordance with the requirements for conducting radiation monitoring, measurements were taken directly near the apparatus in areas 60×60 cm at points located at heights corresponding to the head level (160 ± 20 cm), chest level (120 ± 20 cm), gonad level (80 ± 20 cm) and the level of the legs (30 ± 20 cm). On the basis of the obtained data, the value of the effective dose-rate of x-ray radiation for the whole human body was calculated for each area. Taking into account the characteristics of the irradiation regime used in the clinic, the total effective dose received by the medical personnel accompanying the patient for the entire course of radiotherapy was calculated. Results: A drawn up diagram is illustrating the radiation situation in the treatment room of superficial radiotherapy. Based on the results of calculations, it can be concluded that the radiation exposure on the accompanying person during superficial x-ray therapy of children’s hemangiomas does not exceed the maximum permissible dose specified in paragraph 5.4.4 of SanPiN 2.6.1.2523-09. Conclusion: In exceptional cases, a parent or medical personnel may be in the treatment room to support the patient.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

Macroprobe Mode for the Study of Segregation in Steels

1990 ◽  
Vol 48 (2) ◽  
pp. 260-261
Author(s):  
Auclair Gilles ◽  
Benoit Danièle
Keyword(s):  
Mechanical Properties ◽  
Spatial Distribution ◽  
High Performance ◽  
Volume Fraction ◽  
Sheet Steel ◽  
Acquisition Time ◽  
Chemical Information ◽  
X Ray ◽  
Accurate Quantitative Analysis ◽  
Optical Micrographs

During these last 10 years, high performance correction procedures have been developed for classical EPMA, and it is nowadays possible to obtain accurate quantitative analysis even for soft X-ray radiations. It is also possible to perform EPMA by adapting this accurate quantitative procedures to unusual applications such as the measurement of the segregation on wide areas in as-cast and sheet steel products.The main objection for analysis of segregation in steel by means of a line-scan mode is that it requires a very heavy sampling plan to make sure that the most significant points are analyzed. Moreover only local chemical information is obtained whereas mechanical properties are also dependant on the volume fraction and the spatial distribution of highly segregated zones. For these reasons we have chosen to systematically acquire X-ray calibrated mappings which give pictures similar to optical micrographs. Although mapping requires lengthy acquisition time there is a corresponding increase in the information given by image anlysis.

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

2019 ◽  
Vol 107 (2) ◽  
pp. 207 ◽  
Author(s):  
Jaroslav Čech ◽  
Petr Haušild ◽  
Miroslav Karlík ◽  
Veronika Kadlecová ◽  
Jiří Čapek ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Alloying ◽  
Young’S Modulus ◽  
Milling Time ◽  
Young's Modulus ◽  
Element Model ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Particles ◽  
Complete Homogenization

FeAl20Si20 (wt.%) powders prepared by mechanical alloying from different initial feedstock materials (Fe, Al, Si, FeAl27) were investigated in this study. Scanning electron microscopy, X-ray diffraction and nanoindentation techniques were used to analyze microstructure, phase composition and mechanical properties (hardness and Young’s modulus). Finite element model was developed to account for the decrease in measured values of mechanical properties of powder particles with increasing penetration depth caused by surrounding soft resin used for embedding powder particles. Progressive homogenization of the powders’ microstructure and an increase of hardness and Young’s modulus with milling time were observed and the time for complete homogenization was estimated.

scholarly journals Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1085
Author(s):  
Patricia Castaño-Rivera ◽  
Isabel Calle-Holguín ◽  
Johanna Castaño ◽  
Gustavo Cabrera-Barjas ◽  
Karen Galvez-Garrido ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
High Performance ◽  
Rubber Matrix ◽  
Butadiene Rubber ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rubber Blends ◽  
Ft Ir ◽  
Chloroprene Rubber

Organoclay nanoparticles (Cloisite® C10A, Cloisite® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physical mechanical properties of nanocomposites was determined and correlated with its structure, compatibility and cure properties using Fourier Transformed Infrared (FT-IR), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and rheometric analysis. Physical mechanical properties were improved by organoclays at 5–7 phr. Nanocomposites with organoclays exhibited a remarkable increase up to 46% in abrasion resistance. The improvement in properties was attributed to good organoclay dispersion in the rubber matrix and to the compatibility between them and the chloroprene rubber. Carbon black at a 40 phr load was not the optimal concentration to interact with organoclays. The present study confirmed that organoclays can be a reinforcing filler for high performance applications in rubber nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document