scholarly journals Synthesis of a Cyclophosphazene Derivative Containing Multiple Cyano Groups for Electron-Beam Irradiated Flame-Retardant Materials

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3460
Author(s):  
Bingbing Leng ◽  
Jiayu Yang ◽  
Chunhui Zhu ◽  
Zhipeng Wang ◽  
Chengying Shi ◽  
...  
Keyword(s):  
Electron Beam ◽  
Flame Retardant ◽  
Irradiation Dose ◽  
Flame Retardants ◽  
Maximum Tensile Stress ◽  
High Energy ◽  
Crosslinking Degree ◽  
Limiting Oxygen Index ◽  
Strict Requirement ◽  
Cyano Groups

A cyclophosphazene derivative containing multiple cyano groups, denoted as hexa(4-cyanophenoxy)cyclotriphosphazene (CN-CP), was synthesized by a one-step nucleophilic substitution reaction for a phosphorus–nitrogen flame retardant. To meet the strict requirement of safe and environment-protective insulation materials, a series of composites based on low-density polyethylene-poly(ethylene-co-vinyl acetate) containing CN-CP/Mg(OH)2/Al(OH)3 organic-inorganic synergistic flame retardants was fabricated. High-energy electron beam irradiation was subsequently applied to obtain a halogen-free flame-retardant crosslinked system. The relationship between crosslinking degree and irradiation dose was studied, and crosslinking degrees ranging within 63–85% were obtained under 100–190 kGy. Furthermore, the effects of CN-CP filler and irradiation dose on the properties of the composites were carefully investigated. The maximum tensile stress and limiting oxygen index values of most composites irradiated by EB were more than 15 MPa and 28%. Results revealed that the obtained materials had excellent thermal and mechanical, flame-retardant, and insulation properties, thereby suggesting their promising prospects for wire and cable applications.

The Flammability of Polyacrylonitrile and Its Copolymers I. The Flammability Assessment Using Pressed Powdered Polymer Samples

1993 ◽  
Vol 11 (5) ◽  
pp. 442-456 ◽  
Author(s):  
Jun Zhang ◽  
Michael E. Hall ◽  
A. Richard Horrocks
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Char Residue ◽  
Acrylic Polymer ◽  
Limiting Oxygen Index ◽  
Convenient Means ◽  
Burning Rates ◽  
Polymer Flammability

This paper is the first in a series of four which investigates the burning behaviour and the influence of flame retardant species on the flam mability of fibre-forming polymer and copolymers of acrylonitrile. A pressed powdered polymer sheet technique is described that enables a range of polymer compositions in the presence and absence of flame retardants to be assessed for limiting oxygen index, burning rate and char residue deter minations. The method offers a rapid, reproducible and convenient means of screening possible flame retardant systems, and LOI values compare favourably with those of films and fabrics comprising the same polymeric type. Burning rates, however, are sensitive to changes in physical sample character such as form (film vs. powder sheet) and density. Thus the technique forms an excellent basis for the generation of burning data which will enable comprehensive studies of acrylic polymer flammability and flame retardancy to be undertaken.

Flame-retardant cotton fabrics modified with phosphoramidate derivative via electron beam irradiation process

2019 ◽  
pp. 152808371988181
Author(s):  
Ying Liu ◽  
Li Zhou ◽  
Fang Ding ◽  
Shanshan Li ◽  
Rong Li ◽  
...  
Keyword(s):  
Electron Beam ◽  
Flame Retardant ◽  
Photoelectron Spectroscopy ◽  
Electron Beam Irradiation ◽  
Cotton Fabrics ◽  
Beam Irradiation ◽  
Limiting Oxygen Index ◽  
Flammability Test ◽  
Lower Temperature ◽  
Irradiation Process

In this study, a novel flame-retardant diethyl methacryloylphosphoramidate containing phosphorus and nitrogen was synthesized and characterized by Fourier transform infrared and nuclear magnetic resonance. The synthesized compound was grafted onto cotton fabrics using electron beam irradiation and pad dry cure processes. Scanning electron microscope and X-ray photoelectron spectroscopy were used to characterize the surfaces of the modified cotton fabrics to confirm that diethyl methacryloylphosphoramidate was grafted on cotton fabrics successfully. Both electron beam–cotton and pad dry cure–cotton exhibited efficient flame retardancy which was proved by limiting oxygen index and vertical flammability test. Thermogravimetric analysis results showed that both electron beam-cotton and pad dry cure–cotton degraded at lower temperature and produced higher yields at 600℃. The tensile loss of electron beam–cotton was lower than that of pad dry cure–cotton, and within the acceptable range in flame retardant finishing.

Flammability and mechanical properties of poly(styrene–butadiene–styrene) copolymer–containing intumescent flame retardants

2015 ◽  
Vol 30 (6) ◽  
pp. 816-826 ◽  
Author(s):  
Yiren Huang ◽  
Jianwei Yang ◽  
Zhengzhou Wang
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Limiting Oxygen Index ◽  
Styrene Butadiene Styrene ◽  
Flame Retardant Properties ◽  
Intumescent Flame Retardants ◽  
Styrene Butadiene ◽  
Butadiene Styrene

Flame-retardant properties of ammonium polyphosphate (APP) and its two microcapsules, APP with a shell of melamine–formaldehyde (MF) resin (MFAPP) and APP with a shell of epoxy resin (EPAPP), were studied in styrene–butadiene–styrene (SBS). The results indicate that APP after the microencapsulation leads to an increase in limiting oxygen index in SBS compared with APP. When dipentaerythritol is incorporated into the SBS composites containing the APP microcapsules, a further improvement in flame retardancy of the composites is observed. The microencapsulation does not result in much improvement of mechanical properties. Moreover, the effect of a compatibilizer (SBS grafted with maleic anhydride) on flame-retardant and mechanical properties of SBS/APP composites was investigated.

Synthesis and Application of a Novel Intumescent Flame Retardant Containing Ferrocenyl

2014 ◽  
Vol 1033-1034 ◽  
pp. 931-936
Author(s):  
Cong Yan Chen ◽  
Rui Lan Fan ◽  
Guan Qun Yun
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Good Thermal Stability ◽  
H Nmr ◽  
Positive Effect ◽  
Thermal Stability Of ◽  
Phosphate Groups

A novel intumescent flame retardant (IFR) containing ferrocene and caged bicyclic phosphate groups, 1-oxo-4-[4'-(ferrocene carboxylic acid phenyl ester)] amide-2, 6, 7-trioxa-1-phosphabicyclo- [2.2.2] octane (PFAM), was successfully synthesized. The synthesized PFAM were added to flammable polyurethane (PU) as flame retardants and smoke suppressants. The structure of PFAM was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR) and elemental analysis. Thermal stability of PFAM was tested by themogravimetric analysis (TGA). The results revealed that PFAM had good thermal stability and high char weight, the char weight up to 54% at 600 °C. Flammability properties of PU/PFAM composites were investigated by limiting oxygen index (LOI) test and UL-94 test, respectively. The results of LOI tests showed that the addition of PFAM enhanced flame retardancy of PU. When the content of PFAM reaches to 3%, the LOI value is 22.2. The morphologies of the char for PU and PU/3% PFAM composite can be obtained after LOI testing were examined by SEM. The results demonstrated that PFAM could promote to form the compact and dense intumescent char layer. Experiments showed that, the PFAM application of polyurethane showed positive effect.

Facile preparation of uniform polydopamine particles and its application as an environmentally friendly flame retardant for biodegradable polylactic acid

2020 ◽  
Vol 38 (6) ◽  
pp. 485-503
Author(s):  
Benjamin Tawiah ◽  
Bin Yu ◽  
Anthony Chun Yin Yuen ◽  
Bin Fei
Keyword(s):  
Flame Retardant ◽  
Polylactic Acid ◽  
Flame Retardants ◽  
Environmentally Friendly ◽  
Environmentally Benign ◽  
Commercial Application ◽  
Limiting Oxygen Index ◽  
Gaseous Products ◽  
Peak Heat Release Rate ◽  
Insight Into

The demand for environmentally benign flame retardants for biodegradable polymers has become particularly necessary due to their inherently “green” nature. This work reports intrinsically non-toxic polydopamine (PDA) particles as an efficient and environmentally friendly flame retardant for polylactic acid (PLA). 5 wt% PDA loading resulted in a 22% reduction in the peak heat release rate, 34.7% increase in the fire performance index, and lower CO2 production compared to neat PLA. A limiting oxygen index (LOI) value of 27.5% and a V-2 rating was achieved in the UL-94 vertical burning test. Highly aggregated amorphous particulate char was formed with the increasing content of PDA, and a significant reduction in evolved pyrolysis gaseous products was achieved for the PLA/PDA composites as compared with control PLA. This work provides important insight into the potential commercial application of PDA alone as an efficiently green, environmentally benign flame retardant for bioplastic PLA.

scholarly journals Self-Extinguishing Resin Transfer Molding Composites Using Non-Fire-Retardant Epoxy Resin

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2554 ◽  
Author(s):  
Zhi Geng ◽  
Shuaishuai Yang ◽  
Lianwang Zhang ◽  
Zhenzhen Huang ◽  
Qichao Pan ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Resin Transfer Molding ◽  
Fire Retardant ◽  
Functional Materials ◽  
Building Blocks ◽  
Fire Retardancy ◽  
Limiting Oxygen Index ◽  
Transfer Molding ◽  
Halogen Free

Introducing fire-retardant additives or building blocks into resins is a widely adopted method used for improving the fire retardancy of epoxy composites. However, the increase in viscosity and the presence of insoluble additives accompanied by resin modification remain challenges for resin transfer molding (RTM) processing. We developed a robust approach for fabricating self-extinguishing RTM composites using unmodified and flammable resins. To avoid the effects on resin fluidity and processing, we loaded the flame retardant into tackifiers instead of resins. We found that the halogen-free flame retardant, a microencapsulated red phosphorus (MRP) additive, was enriched on fabric surfaces, which endowed the composites with excellent fire retardancy. The composites showed a 79.2% increase in the limiting oxygen index, a 29.2% reduction in heat release during combustion, and could self-extinguish within two seconds after ignition. Almost no effect on the mechanical properties was observed. This approach is simple, inexpensive, and basically applicable to all resins for fabricating RTM composites. This approach adapts insoluble flame retardants to RTM processing. We envision that this approach could be extended to load other functions (radar absorbing, conductivity, etc.) into RTM composites, broadening the application of RTM processing in the field of advanced functional materials.

Preparation and Properties of Halogen-Free Flame Retardant Polyurethane Foams

2011 ◽  
Vol 418-420 ◽  
pp. 540-543 ◽  
Author(s):  
Ding Meng Chen ◽  
Yi Ping Zhao ◽  
Jia Jian Yan ◽  
Li Chen ◽  
Zhi Zhi Dong ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Mechanical Analysis ◽  
Polyurethane Foams ◽  
Dimethyl Methylphosphonate ◽  
Limiting Oxygen Index ◽  
Layer Composite ◽  
Halogen Free ◽  
Thermal Stable

Polyurethane foams (PUFs) filled with several halogen-free flame retardants and composite halogen-free flame retardants were prepared. The flame retardant, thermal stable and mechanical properties of the PUFs were investigated. The results of limiting oxygen index (LOI) and thermogravimetric analysis (TGA) revealed that PUFs filled with dimethyl methylphosphonate (DMMP) had better flame retardancy compared with other flame retardants and DMMP degraded at a low temperature to form several phosphorated acids which accelerated the formation of char layer. Composite flame retardant of DMMP and melamine (MA) had a synergistic effect between phosphorus and nitrogen. The combination of DMMP and MA slightly altered the density of the PUFs. Results from the mechanical analysis revealed that with the increase in concentration of MA in the composite flame retardant of DMMP and MA, the tensile strength of PUFs reduced firstly and then increased up to a constant.

scholarly journals Comparative Study on the Flame-Retardant Properties and Mechanical Properties of PA66 with Different Dicyclohexyl Hypophosphite Acid Metal Salts

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1956 ◽  
Author(s):  
Heng Zhang ◽  
Junliang Lu ◽  
Hongyan Yang ◽  
Jinyan Lang ◽  
Heng Yang
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Raw Materials ◽  
Testing Machine ◽  
Metal Salts ◽  
Optimal Dosage ◽  
Limiting Oxygen Index ◽  
Combustion Properties ◽  
Flame Retardant Properties

Three metal salts of dicyclohexyl hypophosphite, namely dicyclohexyl aluminum hypophosphite (ADCP), dicyclohexyl magnesium hypophosphite (MDCP), and dicyclohexyl zinc hypophosphite (ZDCP), were synthesized. These flame retardants were subjected to thermogravimetric analysis, and the results showed that ADCP and ZDCP had higher thermal stabilities than MDCP. They were then separately mixed with polyamide 66 (PA66)to prepare composite materials, of which the combustion properties were determined by the limiting oxygen index method and horizontal/vertical burning experiments. The mechanical properties of the materials were further evaluated using an electronic universal testing machine. The results showed that all the three flame retardants exerted a flame-retardant effect on PA66, but the flame-retardant effect of MDCP was inferior to those of ADCP and ZDCP. All the composites also showed similar mechanical properties. Among the three flame retardants, ADCP had the best overall performance for raw materials, showing good flame-retardant properties while maintaining the mechanical properties of the raw materials. The optimal dosage of ADCP was 15 wt %, at which a V-0 rating in the vertical burning test (UL 94 test) can be obtained.

Preparation and Characterization of Excellent Flame Retarded Rigid Polyurethane Foams

2011 ◽  
Vol 374-377 ◽  
pp. 1563-1566
Author(s):  
An Zhen Zhang ◽  
Yi He Zhang
Keyword(s):  
Flame Retardant ◽  
Flame Retardants ◽  
Polyurethane Foams ◽  
Expandable Graphite ◽  
Dimethyl Methylphosphonate ◽  
Limiting Oxygen Index ◽  
Rigid Polyurethane Foams ◽  
Foaming Process ◽  
Flame Retarded

Rigid polyurethane foams were excellent thermal insulation materials with widely used, which was highly flammable at the same time. In order to obtain safe application, flame retarded polyurethane foams were needed. In this paper, series flame retarded rigid polyurethane foams were prepared with loading different flame retardants such as ammonium polyphosphate, expandable graphite, red phosphorus, Tri (2-chloroethyl) phosphate and dimethyl methylphosphonate. The effects of flame retardants on the foaming-process and flame retardant property of the rigid polyurethane foams were investigated by otary viscometer and limiting oxygen index. The results showed that the combination of solid and liquid flame retardants was necessary to improve the flame retardant and different flame retardants played synergistic roles in rigid polyurethane foams. The limiting oxygen indexes of the foams could be up to 30wt% and 29.6% with 25wt% solid flame retardants and 10wt% liquid retardants, respectively.

Sign in / Sign up

Export Citation Format

Share Document