scholarly journals Preparation and Characterization of the Sulfur-Impregnated Natural Zeolite Clinoptilolite for Hg(II) Removal from Aqueous Solutions

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 217
Author(s):  
Marin Ugrina ◽  
Martin Gaberšek ◽  
Aleksandra Daković ◽  
Ivona Nuić
Keyword(s):  
Chemical Modification ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Natural Zeolite ◽  
Contact Time ◽  
Liquid Ratio ◽  
X Ray ◽  
Solid Liquid

Sulfur-impregnated zeolite has been obtained from the natural zeolite clinoptilolite by chemical modification with Na2S at 150 °C. The purpose of zeolite impregnation was to enhance the sorption of Hg(II) from aqueous solutions. Chemical analysis, acid and basic properties determined by Bohem’s method, chemical behavior at different pHo values, zeta potential, cation-exchange capacity (CEC), specific surface area, X-ray powder diffraction (XRPD), scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), as well as thermogravimetry with derivative thermogravimetry (TG-DTG) were used for detailed comparative mineralogical and physico-chemical characterization of natural and sulfur-impregnated zeolites. Results revealed that the surface of the natural zeolite was successfully impregnated with sulfur species in the form of FeS and CaS. Chemical modification caused an increase in basicity and the net negative surface charge due to an increase in oxygen-containing functional groups as well as a decrease in specific surface area and crystallinity due to the formation of sulfur-containing clusters at the zeolite surface. The sorption of Hg(II) species onto the sulfur-impregnated zeolite was affected by the pH, solid/liquid ratio, initial Hg(II) concentration, and contact time. The optimal sorption conditions were determined as pH 2, a solid/liquid ratio of 10 g/L, and a contact time of 800 min. The maximum obtained sorption capacity of the sulfur-impregnated zeolite toward Hg(II) was 1.02 mmol/g. The sorption mechanism of Hg(II) onto the sulfur-impregnated zeolite involves electrostatic attraction, ion exchange, and surface complexation, accompanied by co-precipitation of Hg(II) in the form of HgS. It was found that sulfur-impregnation enhanced the sorption of Hg(II) by 3.6 times compared to the natural zeolite. The leaching test indicated the retention of Hg(II) in the zeolite structure over a wide pH range, making this sulfur-impregnated sorbent a promising material for the remediation of a mercury-polluted environment.

scholarly journals β-Cyclodextrin Modified Poly(Acrylonitrule-co-Acrylic Acid) Hydrogel for Thorium(IV) Adsorption

Polymers ◽  
2017 ◽  
Vol 9 (6) ◽  
pp. 201 ◽  
Author(s):  
Guojian Duan ◽  
Qiangqiang Zhong ◽  
Lei Bi ◽  
Liu Yang ◽  
Tonghuan Liu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Ph Value ◽  
Water System ◽  
Maximum Adsorption Capacity ◽  
Practical Application ◽  
X Ray Diffraction ◽  
Liquid Ratio ◽  
X Ray ◽  
Solid Liquid

In this report, the β-CD(AN-co-AA) hydrogel was used to remove the thorium(IV) [Th(IV)] from the water system, and the new adsorbent was characterized through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The influences of contact time, pH value, ionic strength, solid-liquid ratio, initial Th(IV) concentration, and temperature on Th(IV) adsorption onto the functional hydrogel were researched. The results showed that the experimental data followed the Langmuir isotherm and the maximum adsorption capacity (qmax) for Th(IV) was 692 mg/g at pH 2.95, which approached the calculated (qe) 682 mg/g. The desorption capacity of Th(IV) in different HNO3 concentrations ranging from 0.005 to 0.5 M was also studied, and the percentage of the maximum desorption was 86.85% in the condition of 0.09 M HNO3. The selectivity of β-CD(AN-co-AA) hydrogel was also be studied, the results indicated that this material retained the good adsorption capacity to Th(IV) even when the Ca2+, Mg2+, or Pb2+ existed in the system. The findings indicate that β-CD(AN-co-AA) can be used as a new candidate for the enrichment and separation of Th(IV), or its analogue actinides, from large-volume solution in practical application.

scholarly journals Adsorptive removal of azithromycin from aqueous solutions using raw and saponin-modified nano diatomite

2019 ◽  
Vol 80 (5) ◽  
pp. 939-949
Author(s):  
Siavash Davoodi ◽  
Behnaz Dahrazma ◽  
Nasser Goudarzi ◽  
Hajar Ghasemian Gorji
Keyword(s):  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Low Concentrations ◽  
Intra Particle Diffusion ◽  
High Concentrations

Abstract This study aims to investigate the performance and mechanism of raw (R-ND) and saponin-modified nano diatomite (M-ND) in the removal of azithromycin from aqueous solutions. Adsorbent characterization was performed using X-ray fluorescence, Brunauer–Emmett–Teller (BET), scanning electron spectroscopy, dynamic light scattering and energy-dispersive X-ray analyses. It was shown that the specific surface area of R-ND was 119.5 m2/g, 14-fold higher than that for raw diatomite, and for M-ND it was 90.1 m2/g. Various adsorption conditions, i.e. adsorbent dosage, pH, initial concentration and contact time were investigated. According to the results, despite reducing the specific surface area by 25%, modification of nano diatomite by saponin markedly enhanced its performance in the removal of azithromycin. The maximum adsorption capacity of R-ND and M-ND in the removal of azithromycin was 68 and 91.7 mg/g, respectively. Fourier transform infrared spectroscopy results revealed that azithromycin was adsorbed by O-H groups on the diatomite surface. Weber–Morris intra-particle diffusion (IPD) model suggested that while IPD is not the rate-controlling step in high concentrations of azithromycin, it is the only step that controls the rate of adsorption in low concentrations. In comparison to R-ND, M-ND showed a higher efficiency in the removal of azithromycin and, therefore, it can be used as a promising low-cost adsorbent to remove azithromycin from aqueous solutions.

Preparation and Characterization of Flowerlike Nickel Oxide

2011 ◽  
Vol 121-126 ◽  
pp. 1044-1048
Author(s):  
Chang Yu Li ◽  
Shou Xin Liu ◽  
Li Li Liu
Keyword(s):  
Nickel Oxide ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Area Measurement ◽  
Simple Liquid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Area Measurement

Flowerlike nickel oxide was synthesized by a simple liquid-phase process to obtain the hydroxide precursor and then calcined to form the nickel oxide. The precursor and the nickel oxide were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TG) , the scanning electron microscope(SEM) and Brunauer–Emmett–Teller-specific surface area measurement. The results indicated α-Nickel hydroxide was transferred to NiO with a cubic crystalline structure after being calcined at 450 °C; the NiO still kept the morphology of the precursors and the specific surface area of the NiO was 125.2m2/g.

PREPARATION AND CHARACTERIZATION OF TITANIA-PILLARED MONTMORILLONITE

2008 ◽  
Vol 15 (03) ◽  
pp. 329-336 ◽  
Author(s):  
YIMIN ZHANG ◽  
SHAOXIAN SONG ◽  
MIN ZHANG ◽  
BIYANG TUO
Keyword(s):  
Thermal Stability ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Thermal Stability ◽  
Basal Spacing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pillared Montmorillonite

In this work, a Ti -pillared montmorillonite with high thermal stability has been prepared by using a Na -montmorillonite as the host clay and polyhydroxy-titania ions as the pillaring precursor. The formation of Ti -pillared montmorillonite has been confirmed from the characterizations through X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric–differential scanning calorimeter, and specific surface area analyses. In the preparation of Ti -pillared montmorillonite several parameters, such as the type of solvent in which the synthesis is realized, the ratio of polyhydroxy-titania ions and montmorillonite, the intercalation time, the calcining temperature, and calcining time, were tested to understand their effects on the basal spacing. It was shown that this method could produce a Ti -pillared montmorillonite with the basal spacing of 3.74 nm, specific surface area of 409 m2/g, and mean pore size of 2.94 nm, as well as a high thermal stability up to 900°C.

scholarly journals Magnetically Recyclable Wool Keratin Modified Magnetite Powders for Efficient Removal of Cu2+ Ions from Aqueous Solutions

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1068
Author(s):  
Xinyue Zhang ◽  
Yani Guo ◽  
Wenjun Li ◽  
Jinyuan Zhang ◽  
Hailiang Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Chemical Compositions ◽  
Ion Adsorption ◽  
X Ray ◽  
Wool Keratin

The treatment of wastewater containing heavy metals and the utilization of wool waste are very important for the sustainable development of textile mills. In this study, the wool keratin modified magnetite (Fe3O4) powders were fabricated by using wool waste via a co-precipitation technique for removal of Cu2+ ions from aqueous solutions. The morphology, chemical compositions, crystal structure, microstructure, magnetism properties, organic content, and specific surface area of as-fabricated powders were systematically characterized by various techniques including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), thermogravimetric (TG) analysis, and Brunauer–Emmett–Teller (BET) surface area analyzer. The effects of experimental parameters such as the volume of wool keratin hydrolysate, the dosage of powder, the initial Cu2+ ion concentration, and the pH value of solution on the adsorption capacity of Cu2+ ions by the powders were examined. The experimental results indicated that the Cu2+ ion adsorption performance of the wool keratin modified Fe3O4 powders exhibited much better than that of the chitosan modified ones with a maximum Cu2+ adsorption capacity of 27.4 mg/g under favorable conditions (0.05 g powders; 50 mL of 40 mg/L CuSO4; pH 5; temperature 293 K). The high adsorption capacity towards Cu2+ ions on the wool keratin modified Fe3O4 powders was primarily because of the strong surface complexation of –COOH and –NH2 functional groups of wool keratins with Cu2+ ions. The Cu2+ ion adsorption process on the wool keratin modified Fe3O4 powders followed the Temkin adsorption isotherm model and the intraparticle diffusion and pseudo-second-order adsorption kinetic models. After Cu2+ ion removal, the wool keratin modified Fe3O4 powders were easily separated using a magnet from aqueous solution and efficiently regenerated using 0.5 M ethylene diamine tetraacetic acid (EDTA)-H2SO4 eluting. The wool keratin modified Fe3O4 powders possessed good regenerative performance after five cycles. This study provided a feasible way to utilize waste wool textiles for preparing magnetic biomass-based adsorbents for the removal of heavy metal ions from aqueous solutions.

Synthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting Application

2013 ◽  
Vol 594-595 ◽  
pp. 73-77 ◽  
Author(s):  
Sze Mei Chin ◽  
Suriati Sufian ◽  
Jeefferie Abd Razak
Keyword(s):  
Surface Area ◽  
Water Splitting ◽  
Combustion Method ◽  
Hydrogen Gas ◽  
Bet Surface Area ◽  
Synthesis And Characterization ◽  
Hematite Nanoparticles ◽  
X Ray ◽  
Bet Specific Surface Area

This paper highlights on the hydrogen production through photocatalytic activity by using hematite nanoparticles synthesized from self-combustion method based on different stirring period. The morphologies and microstructures of the nanostructures were determined using Field-Emission Scanning Electron Microscope (FESEM), X-Ray Diffractometer (XRD) and Particle Size Analyser (PSA). Besides that, surface area analyser was used to determine the BET surface area of the hematite samples. The hematite nanocatalyst as-synthesized are proven to be rhombohedral crystalline hematite (α-Fe2O3) with particle diameters ranging from 60-140 nm. The BET specific surface area of hematite samples increased from 5.437 to 7.6425 m2/g with increasing stirring period from 1 to 4 weeks. This caused the amount of hydrogen gas produced from photocatalytic water splitting to increase as well.

Facile Preparation of P-25 Films Dip-Coated Nickel Foam and High Photocatalytic Activity for the Degradation of Quinoline and Industrial Wastewater

2011 ◽  
Vol 9 (1) ◽  
Author(s):  
Suiyi Zhu ◽  
Xia Yang ◽  
Gu-Ning Wang ◽  
Lei-Lei Zhang ◽  
He-Feng Zhu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Continuous Flow ◽  
Industrial Wastewater ◽  
Nickel Foam ◽  
High Photocatalytic Activity ◽  
Photocatalytic Reactor ◽  
X Ray ◽  
Three Phase

A kind of P-25 TiO2 films coated nickel foam was synthesized by a facile dip-coating/calcination route, and used to fabricate a continuous-flow three-phase photocatalytic reactor. The morphology, crystal phase structure, surface composition and specific surface area of P-25 films coated nickel foam were investigated by field emission scanning electron microscope (FE-SEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS) and nitrogen adsorption-desorption measurements, respectively. The results indicated that the coated/ calcined P-25 films had the porous surface structure fabricated by nano-sized titanium dioxide consisted of two crystal phases and incorporated with a NiO interlayer. The increase of P-25 contents enhanced the specific surface area; however, 20 percent of initial P-25 sol would result in visible large cracks because of too high P-25 content and consequently cause the peeling of films. The photocatalytic activities of nickel foam with different coating amounts of P-25 for the degradation of quinoline aqueous solutions were investigated with a continuous-flow three-phase photocatalytic reactor based on the P-25 films coated nickel foam. The results suggested that nickel foam coated with 10 percent of P-25 sol had an optimal photocatalytic activity for the degradation of quinoline aqueous solutions. The continuous-flow three-phase photocatalytic reactor fabricated with P-25 films coated nickel foam with an optimal P-25 coating amount shows high photocatalytic activity and stability for the degradation of quinoline aqueous solutions and industrial wastewater. The treated industrial wastewater meets the international discharge standard.

scholarly journals Synthesis and Characterization of Nanoporous Monetite Which Can Be Applicable for Drug Carrier

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Esmael Salimi ◽  
Jafar Javadpour
Keyword(s):  
Surface Area ◽  
Cetyltrimethylammonium Bromide ◽  
Drug Carrier ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Plate Shape ◽  
Desorption Isotherms ◽  
Adsorption Desorption

Wormhole-like mesostructured monetite was successfully synthesized using cetyltrimethylammonium bromide (C19H42BrN, CTAB), as a porosity agent. X-ray techniques and FTIR reveal that the crystalline grains consist of highly crystalline pure monetite phase. Monetite rods with diameter around 20–40 nm and length in the range of 50–200 nm were confirmed by FESEM and TEM. Based on N2adsorption-desorption isotherms investigation, surface area increased up to 31.5 m2/g due to the removal of surfactant after calcinations at 400°C. The results indicate that CTAB can not only affect monetite crystallization but also change particles morphology from plate shape to rod-like.

Synthesis of Novel Core-Shell Structured Hydroxyapatite/Meso-Silica for Removal of Methylene Blue from Aqueous Solutions

2012 ◽  
Vol 463-464 ◽  
pp. 543-547 ◽  
Author(s):  
Cheng Feng Li ◽  
Xiao Lu Ge ◽  
Shu Guang Liu ◽  
Fei Yu Liu
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Low Cost ◽  
Nitrogen Adsorption ◽  
Precipitation Method ◽  
Core Shell ◽  
Adsorption Desorption

Core-shell structured hydroxyapatite (HA)/meso-silica was prepared and used as absorbance of methylene blue (MB). HA/meso-silica was synthesized in three steps: preparation of nano-sized HA by wet precipitation method, coating of dense silica and deposition of meso-silica shell on HA. As-received samples were characterized by Fourier transformed infare spectra, small angle X-ray diffraction, nitrogen adsorption-desorption isotherm and transmission electron microscopy. A wormhole framework mesostructure was found for HA/meso-silica. The specific surface area and pore volume were 128 m2•g-1 and 0.36 cm3•g-1, respectively. From the adsorption isotherm, HA/meso-silica with the great specific surface area exhibited a prominent adsorption capacity of MB (134.0 mg/g) in comparison with bare HA (0 mg/g). This study might shed light on surface modification of conventional low-cost adsorbents for removal of organic pollutants from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document