scholarly journals TASPERT: Target-Specific Reverse Transcript Pools to Improve HTS Plant Virus Diagnostics

Viruses ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1223
Author(s):  
Andres S. Espindola ◽  
Daniela Sempertegui-Bayas ◽  
Danny F. Bravo-Padilla ◽  
Viviana Freire-Zapata ◽  
Francisco Ochoa-Corona ◽  
...  
Keyword(s):  
High Throughput Sequencing ◽  
Rna Viruses ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Bioinformatic Analysis ◽  
Metagenomic Sample ◽  
Rrna Depletion ◽  
Virus Diagnostics ◽  
Management Preparation ◽  
Reverse Transcript

High-throughput sequencing (HTS) is becoming the new norm of diagnostics in plant quarantine settings. HTS can be used to detect, in theory, all pathogens present in any given sample. The technique’s success depends on various factors, including methods for sample management/preparation and suitable bioinformatic analysis. The Limit of Detection (LoD) of HTS for plant diagnostic tests can be higher than that of PCR, increasing the risk of false negatives in the case of low titer of the target pathogen. Several solutions have been suggested, particularly for RNA viruses, including rRNA depletion of the host, dsRNA, and siRNA extractions, which increase the relative pathogen titer in a metagenomic sample. However, these solutions are costly and time-consuming. Here we present a faster and cost-effective alternative method with lower HTS-LoD similar to or lower than PCR. The technique is called TArget-SPecific Reverse Transcript (TASPERT) pool. It relies on pathogen-specific reverse primers, targeting all RNA viruses of interest, pooled and used in double-stranded cDNA synthesis. These reverse primers enrich the sample for only pathogens of interest. Evidence on how TASPERT is significantly superior to oligodT, random 6-mer, and 20-mer in generating metagenomic libraries containing the pathogen of interest is presented in this proof of concept.

scholarly journals Hairpin structure facilitates high-fidelity DNA amplification reactions in both qPCR and high-throughput sequencing

2021 ◽  
Author(s):  
Kerou Zhang ◽  
Alessandro Pinto ◽  
Peng Dai ◽  
Michael Wang ◽  
Lauren Yuxuan Cheng ◽  
...  
Keyword(s):  
Dna Sequences ◽  
High Throughput Sequencing ◽  
Limit Of Detection ◽  
Dna Polymerases ◽  
Dna Amplification ◽  
Cost Effective ◽  
High Fidelity ◽  
Resistance Mutations ◽  
Chain Reactions ◽  
Early Cancer Diagnosis

Effective polymerase chain reactions (PCR) are important in bio-laboratories. It is essential to detect rare DNA-sequence variants for early cancer diagnosis or for drug-resistance mutations identification. Some of the common detection quantitative PCR (qPCR) methods are restricted in the limit of detection (LoD) because of the high polymerase misincorporation rate in Taq DNA polymerases. High-fidelity (HiFi) DNA polymerases have a 50- to 250-fold higher fidelity. Yet, there are currently no proper designs for multiplexed HiFi qPCR reactions. Moreover, the popularity of targeting highly multiplex DNA sequences requires minimizing PCR side products, as the potential of dimerization grows quadratically as the plexes of primers increases. Efforts tried before were either an add-on step, or technology-specific, or requiring high-level computing skills. There lacks an easy-to-apply and cost-effective method for dimerization reduction. Here, we presented the Occlusion System, composed of a 5'-overhanged primer and a probe with a short-stem hairpin. We demonstrated that it allowed multiplexing high-fidelity qPCR reaction, it was also compatible with the current variant-enrichment method to improve the LoD by 10-fold. Further, we found that the Occlusion System reduced the dimerization up to 10-fold in highly multiplexed PCR. Thus, the Occlusion System satisfactorily improved both qPCR sensitivity and PCR efficiency.

scholarly journals A simple, cost-effective, and robust method for rRNA depletion in RNA-sequencing studies

2020 ◽  
Author(s):  
Peter H. Culviner ◽  
Chantal K. Guegler ◽  
Michael T. Laub
Keyword(s):  
Gene Expression ◽  
Rna Sequencing ◽  
Ribosomal Rna ◽  
Bacterial Species ◽  
Cost Effective ◽  
Rna Seq ◽  
Robust Method ◽  
Total Rna ◽  
Metagenomic Sample ◽  
Rrna Depletion

AbstractThe profiling of gene expression by RNA-sequencing (RNA-seq) has enabled powerful studies of global transcriptional patterns in all organisms, including bacteria. Because the vast majority of RNA in bacteria is ribosomal RNA (rRNA), it is standard practice to deplete the rRNA from a total RNA sample such that the reads in an RNA-seq experiment derive predominantly from mRNA. One of the most commonly used commercial kits for rRNA depletion, the Ribo-Zero kit from Illumina, was recently discontinued. Here, we report the development a simple, cost-effective, and robust method for depleting rRNA that can be easily implemented by any lab or facility. We first developed an algorithm for designing biotinylated oligonucleotides that will hybridize tightly and specifically to the 23S, 16S, and 5S rRNAs from any species of interest. Precipitation of these oligonucleotides bound to rRNA by magnetic streptavidin beads then depletes rRNA from a complex, total RNA sample such that ~75-80% of reads in a typical RNA-seq experiment derive from mRNA. Importantly, we demonstrate a high correlation of RNA abundance or fold-change measurements in RNA-seq experiments between our method and the previously available Ribo-Zero kit. Complete details on the methodology are provided, including open-source software for designing oligonucleotides optimized for any bacterial species or metagenomic sample of interest.ImportanceThe ability to examine global patterns of gene expression in microbes through RNA-sequencing has fundamentally transformed microbiology. However, RNA-seq depends critically on the removal of ribosomal RNA from total RNA samples. Otherwise, rRNA would comprise upwards of 90% of the reads in a typical RNA-seq experiment, limiting the reads coming from messenger RNA or requiring high total read depth. A commonly used, kit for rRNA subtraction from Illumina was recently discontinued. Here, we report the development of a ‘do-it-yourself’ kit for rapid, cost-effective, and robust depletion of rRNA from total RNA. We present an algorithm for designing biotinylated oligonucleotides that will hybridize to the rRNAs from a target set of species. We then demonstrate that the designed oligos enable sufficient rRNA depletion to produce RNA-seq data with 75-80% of reads comming from mRNA. The methodology presented should enable RNA-seq studies on any species or metagenomic sample of interest.

scholarly journals A Simple, Cost-Effective, and Robust Method for rRNA Depletion in RNA-Sequencing Studies

mBio ◽  
2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Peter H. Culviner ◽  
Chantal K. Guegler ◽  
Michael T. Laub
Keyword(s):  
Gene Expression ◽  
Rna Sequencing ◽  
Bacterial Species ◽  
Extended Period ◽  
Cost Effective ◽  
Rna Seq ◽  
Robust Method ◽  
Total Rna ◽  
Metagenomic Sample ◽  
Rrna Depletion

ABSTRACT The profiling of gene expression by RNA sequencing (RNA-seq) has enabled powerful studies of global transcriptional patterns in all organisms, including bacteria. Because the vast majority of RNA in bacteria is rRNA, it is standard practice to deplete the rRNA from a total RNA sample such that the reads in an RNA-seq experiment derive predominantly from mRNA. One of the most commonly used commercial kits for rRNA depletion, the Ribo-Zero kit from Illumina, was recently discontinued abruptly and for an extended period of time. Here, we report the development of a simple, cost-effective, and robust method for depleting rRNA that can be easily implemented by any lab or facility. We first developed an algorithm for designing biotinylated oligonucleotides that will hybridize tightly and specifically to the 23S, 16S, and 5S rRNAs from any species of interest. Precipitation of these oligonucleotides bound to rRNA by magnetic streptavidin-coated beads then depletes rRNA from a complex, total RNA sample such that ∼75 to 80% of reads in a typical RNA-seq experiment derive from mRNA. Importantly, we demonstrate a high correlation of RNA abundance or fold change measurements in RNA-seq experiments between our method and the Ribo-Zero kit. Complete details on the methodology are provided, including open-source software for designing oligonucleotides optimized for any bacterial species or community of interest. IMPORTANCE The ability to examine global patterns of gene expression in microbes through RNA sequencing has fundamentally transformed microbiology. However, RNA-seq depends critically on the removal of rRNA from total RNA samples. Otherwise, rRNA would comprise upward of 90% of the reads in a typical RNA-seq experiment, limiting the reads coming from mRNA or requiring high total read depth. A commonly used kit for rRNA subtraction from Illumina was recently unavailable for an extended period of time, disrupting routine rRNA depletion. Here, we report the development of a “do-it-yourself” kit for rapid, cost-effective, and robust depletion of rRNA from total RNA. We present an algorithm for designing biotinylated oligonucleotides that will hybridize to the rRNAs from a target set of species. We then demonstrate that the designed oligonucleotides enable sufficient rRNA depletion to produce RNA-seq data with 75 to 80% of reads coming from mRNA. The methodology presented should enable RNA-seq studies on any species or metagenomic sample of interest.

Green Synthesis and Spectroscopic Studies of Ag-rGO Nanocomposites for Highly Selective Mercury (II) Sensing

2018 ◽  
Vol 9 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Shubhangi J. Mane-Gavade ◽  
Sandip R. Sabale ◽  
Xiao-Ying Yu ◽  
Gurunath H. Nikam ◽  
Bhaskar V. Tamhankar
Keyword(s):  
Green Synthesis ◽  
Color Change ◽  
Limit Of Detection ◽  
Aqueous Media ◽  
Suitable Condition ◽  
Cost Effective ◽  
Spectroscopic Studies ◽  
Calibration Plot ◽  
First Time

Introduction: Herein we report the green synthesis and characterization of silverreduced graphene oxide nanocomposites (Ag-rGO) using Acacia nilotica gum for the first time. Experimental: We demonstrate the Hg2+ ions sensing ability of the Ag-rGO nanocomposites form aqueous medium. The developed colorimetric sensor method is simple, fast and selective for the detection of Hg2+ ions in aqueous media in presence of other associated ions. A significant color change was noticed with naked eye upon Hg2+ addition. The color change was not observed for cations including Sr2+, Ni2+, Cd2+, Pb2+, Mg2+, Ca2+, Fe2+, Ba2+ and Mn2+indicating that only Hg2+ shows a strong interaction with Ag-rGO nanocomposites. Under the most suitable condition, the calibration plot (A0-A) against concentration of Hg2+ was linear in the range of 0.1-1.0 ppm with a correlation coefficient (R2) value 0.9998. Results & Conclusion The concentration of Hg2+ was quantitatively determined with the Limit of Detection (LOD) of 0.85 ppm. Also, this method shows excellent selectivity towards Hg2+ over nine other cations tested. Moreover, the method offers a new cost effective, rapid and simple approach for the detection of Hg2+ in water samples.

scholarly journals Application of Oxford Nanopore Technology to Plant Virus Detection

Viruses ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1424
Author(s):  
Lia W. Liefting ◽  
David W. Waite ◽  
Jeremy R. Thompson
Keyword(s):  
Plant Virus ◽  
High Throughput Sequencing ◽  
Virus Detection ◽  
Diagnostic Methods ◽  
Plant Virus Detection ◽  
Sequencing Technologies ◽  
Oxford Nanopore ◽  
Virus Diagnostics ◽  
Post Entry ◽  
Read Accuracy

The adoption of Oxford Nanopore Technologies (ONT) sequencing as a tool in plant virology has been relatively slow despite its promise in more recent years to yield large quantities of long nucleotide sequences in real time without the need for prior amplification. The portability of the MinION and Flongle platforms combined with lowering costs and continued improvements in read accuracy make ONT an attractive method for both low- and high-scale virus diagnostics. Here, we provide a detailed step-by-step protocol using the ONT Flongle platform that we have developed for the routine application on a range of symptomatic post-entry quarantine and domestic surveillance plant samples. The aim of this methods paper is to highlight ONT’s feasibility as a valuable component to the diagnostician’s toolkit and to hopefully stimulate other laboratories towards the eventual goal of integrating high-throughput sequencing technologies as validated plant virus diagnostic methods in their own right.

scholarly journals Pitfalls in the Immunochemical Determination of β‑Lactam Antibiotics in Water

Antibiotics ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 298
Author(s):  
Alexander Ecke ◽  
Rudolf J. Schneider
Keyword(s):  
Limit Of Detection ◽  
Cost Effective ◽  
Enzyme Linked Immunosorbent Assay ◽  
Degree Of Hydrolysis ◽  
Site Analysis ◽  
Antibody Recognition ◽  
Immunochemical Determination ◽  
Key Factor ◽  
Lactam Ring

Contamination of waters with pharmaceuticals is an alarming problem as it may support the evolution of antimicrobial resistance. Therefore, fast and cost-effective analytical methods for potential on-site analysis are desired in order to control the water quality and assure the safety of its use as a source of drinking water. Antibody-based methods, such as the enzyme-linked immunosorbent assay (ELISA), can be helpful in this regard but can also have certain pitfalls in store, depending on the analyte. As shown here for the class of β-lactam antibiotics, hydrolysis of the β‑lactam ring is a key factor in the immunochemical analysis as it influences antibody recognition. With the antibody used in this study, the limit of detection (LOD) in the immunoassay could be significantly reduced by hydrolysis for the five tested penicillins, with the lowest LOD for carbenicillin (0.2 nmol/L) and the greatest impact on penicillins G and V (reduction by 85%). In addition to enhanced quantification, our strategy also provides access to information about the degree of hydrolysis in water samples as shown for the most abundant penicillin amoxicillin.

scholarly journals INSIGHT: A population-scale COVID-19 testing strategy combining point-of-care diagnosis with centralized high-throughput sequencing

2021 ◽  
Vol 7 (7) ◽  
pp. eabe5054
Author(s):  
Qianxin Wu ◽  
Chenqu Suo ◽  
Tom Brown ◽  
Tengyao Wang ◽  
Sarah A. Teichmann ◽  
...  
Keyword(s):  
High Throughput ◽  
High Throughput Sequencing ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Population Level ◽  
Reaction Products ◽  
Testing Strategy ◽  
Asymptomatic Patients ◽  
Testing Stage ◽  
Population Scale

We present INSIGHT [isothermal NASBA (nucleic acid sequence–based amplification) sequencing–based high-throughput test], a two-stage coronavirus disease 2019 testing strategy, using a barcoded isothermal NASBA reaction. It combines point-of-care diagnosis with next-generation sequencing, aiming to achieve population-scale testing. Stage 1 allows a quick decentralized readout for early isolation of presymptomatic or asymptomatic patients. It gives results within 1 to 2 hours, using either fluorescence detection or a lateral flow readout, while simultaneously incorporating sample-specific barcodes. The same reaction products from potentially hundreds of thousands of samples can then be pooled and used in a highly multiplexed sequencing–based assay in stage 2. This second stage confirms the near-patient testing results and facilitates centralized data collection. The 95% limit of detection is <50 copies of viral RNA per reaction. INSIGHT is suitable for further development into a rapid home-based, point-of-care assay and is potentially scalable to the population level.

scholarly journals Direct diagnostic testing of SARS-CoV-2 without the need for prior RNA extraction

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shan Wei ◽  
Esther Kohl ◽  
Alexandre Djandji ◽  
Stephanie Morgan ◽  
Susan Whittier ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Diagnostic Testing ◽  
Rna Extraction ◽  
Cost Effective ◽  
Clinical Samples ◽  
Nasopharyngeal Swab ◽  
Percentage Agreement ◽  
Testing Method ◽  
Viral Transport

AbstractThe COVID-19 pandemic has resulted in an urgent need for a rapid, point of care diagnostic testing that could be rapidly scaled on a worldwide level. We developed and tested a highly sensitive and robust assay based on reverse transcription loop mediated isothermal amplification (RT-LAMP) that uses readily available reagents and a simple heat block using contrived spike-in and actual clinical samples. RT-LAMP testing on RNA-spiked samples showed a limit of detection (LoD) of 2.5 copies/μl of viral transport media. RT-LAMP testing directly on clinical nasopharyngeal swab samples in viral transport media had an 85% positive percentage agreement (PPA) (17/20), and 100% negative percentage agreement (NPV) and delivered results in 30 min. Our optimized RT-LAMP based testing method is a scalable system that is sufficiently sensitive and robust to test for SARS-CoV-2 directly on clinical nasopharyngeal swab samples in viral transport media in 30 min at the point of care without the need for specialized or proprietary equipment or reagents. This cost-effective and efficient one-step testing method can be readily available for COVID-19 testing world-wide, especially in resource poor settings.

scholarly journals Immobilization-Free Electrochemical Sensor Coupled with a Graphene-Oxide-Based Aptasensor for Glycated Albumin Detection

Biosensors ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 85
Author(s):  
Wassa Waiwinya ◽  
Thitirat Putnin ◽  
Dechnarong Pimalai ◽  
Wireeya Chawjiraphan ◽  
Nuankanya Sathirapongsasuti ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Electrochemical Sensor ◽  
Detection Method ◽  
Limit Of Detection ◽  
Glycated Albumin ◽  
Cost Effective ◽  
Logarithmic Scale ◽  
Electrochemical Aptasensor ◽  
Alternative Approach

An immobilization-free electrochemical sensor coupled with a graphene oxide (GO)-based aptasensor was developed for glycated human serum albumin (GHSA) detection. The concentration of GHSA was monitored by measuring the electrochemical response of free GO and aptamer-bound GO in the presence of glycated albumin; their currents served as the analytical signals. The electrochemical aptasensor exhibited good performance with a base-10 logarithmic scale. The calibration curve was achieved in the range of 0.01–50 µg/mL. The limit of detection (LOD) was 8.70 ng/mL. The developed method was considered a one-drop measurement process because a fabrication step and the probe-immobilization process were not required. This simple sensor offers a cost-effective, rapid, and sensitive detection method, and could be an alternative approach for determination of GHSA levels.

Sign in / Sign up

Export Citation Format

Share Document