Improving the quality of raw milk and yogurt

2021 ◽  
pp. 49-57
Author(s):  
T. V. Ananyeva ◽  
V. I. Ostroukhova
Keyword(s):  
Electromagnetic Radiation ◽  
Raw Materials ◽  
Educational Institution ◽  
Raw Milk ◽  
Negative Influence ◽  
Raw Material ◽  
Federal State ◽  
Expert Assessment ◽  
Microbiological Safety

Milk is a part of many food products. In the expert assessment of the quality of raw materials, primary attention should be paid to its microbiological safety, since poisoning with dairy products is a common cause of diseases of the gastrointestinal tract. The experiment has been carried out on the base in the Teaching and Production Livestock Farm in the Federal State Budgetary Educational Institution of Higher Education “Russian State Agrarian University – Moscow Agricultural Academy named after K. A. Timiryazev” (Moscow). The purpose of the research was to improve the quality indicators of raw milk and yogurt. The method of processing raw milk, which reduces the number of potentially dangerous microorganisms in the products produced from it, has been studied. During the experiment the influence of electromagnetic radiation on organoleptic and physic and chemical parameters has been observed; the quantitative and qualitative composition of milk and yogurt microorganisms has been evaluated. The samples of raw materials had a uniform consistency without sediment and flakes, the color was milky white, and the smell was characteristic of natural cow’s milk. Electromagnetic treatment did not affect the main elements of the chemical composition of milk: the mass fraction of dry substances, fat, protein and lactose. In the experimental samples of raw milk after electromagnetic pulses treatment, the decrease in the growth rate of microorganisms including Quantity of Mesophilic Aerobic and Facultative Anaerobic Microorganisms (QMAFAnM), yeast and mold, has been noted. No bacteria of the Staphylococcus aureus and Escherichia coligroups have been found in the milk samples. The electromagnetic field had the negligible effect on the amount of lactic acid microorganisms in the raw material. During the experiment, there was no negative influence of electromagnetic radiation on the organoleptic, physic and chemical and sanitary-hygienic parameters of yogurt. The issues of ensuring the microbiological safety of raw milk have been described and the method for optimizing the sanitary and hygienic parameters of yogurt in accordance with the current requirements of regulatory documents has been suggest in the article.

scholarly journals Study of the effect of high-frequency acoustic cavitation on the quality of raw milk and dairy products based on it

2019 ◽  
Vol 81 (3) ◽  
pp. 145-150
Author(s):  
K. A. Kanina ◽  
O. N. Krasulya ◽  
N. A. Zhizhin ◽  
E. S. Semenova
Keyword(s):  
High Frequency ◽  
Dairy Products ◽  
Raw Materials ◽  
Acoustic Cavitation ◽  
Raw Milk ◽  
Raw Material ◽  
Coliform Bacteria ◽  
Cow’S Milk ◽  
Cow's Milk

The article presents the results of studies obtained in the study of the quality of milk processed with the use of high-frequency acoustic cavitation and dairy products produced with its use. The research was carried out with the use of General scientific and special research methods in the laboratory of the Department of technology of storage and processing of animal products of the K. A. Timiryazev and in the accredited laboratory of technochemical control of the all-Russian research Institute of dairy industry. It is shown that the treatment of cow's milk-raw materials high-frequency ultrasonic vibrations (above 45 kHz), the generated electric ultrasonic device immersion type pulse impact ouzo "Activator-150", the number of bacteria of group of intestinal sticks (coliforms) decreased by almost 40%, which allows to make a conclusion about the appropriateness of the selected method of exposure for the destruction of microorganisms E. coli and coliform bacteria. Processed, using high-frequency acoustic cavitation, cow's milk was used for the production of brine cheese-cheese. It is shown that cheese cheese had a high nutritional value, which is due to the preservation of essential substances in the raw material (in particular, calcium, which in the production of cheese cheese precipitates if pasteurized milk is used), elastic consistency, safety of consumer characteristics - microbiological and physico-chemical.

Using chicory ordynary as raw materials for production of pickled products

2019 ◽  
pp. 38-47
Author(s):  
Gasparyan ◽  
Maslovsky ◽  
Zamyatina ◽  
Nesterenko ◽  
Karpova ◽  
...  
Keyword(s):  
Fruits And Vegetables ◽  
Raw Materials ◽  
Educational Institution ◽  
Federal State ◽  
Organoleptic Characteristics ◽  
Russian State ◽  
Wine Vinegar ◽  
Biochemical Studies ◽  
Vegetable Raw Materials

Marinating is one of the most common ways of processing vegetable raw materials. The use of new, non-traditional types of raw materials, in particular root chicory, should be considered as one of the directions for expanding the assortment of marinated products, increasing its consumer properties. Researches in this direction were conducted in 2018 on the basis of the Department of Technology for storing and processing fruits and vegetables of the Federal State Budgetary Educational Institution of Higher Education of the Russian State Agrarian University-Moscow Agricultural Academy named after K.A. Timiryazev. The object of research was the root chicory varieties Yaroslavsky. The scheme of experience included biochemical studies of raw materials, laboratory production of weakly acidic and acidic pickles using in the formulation of acetic essence, wine and apple vinegar, organoleptic and biochemical studies of the finished product. Studies have shown that the production of pickled products from chicory allows you to get products with high organoleptic characteristics. Improving the quality of pickled products is promoted by replacing the vinegar essence with apple or wine vinegar in the recipe - the taste becomes less sharp, the aroma is enriched with fruit tones. Neutral taste of chicory with a slightly bitter aftertaste is optimally combined with the high content of acetic acid (up to 0.9%), characteristic of sour pickles. Sour marinade using tartaric acid in the recipe according to the results of tasting received the highest score - 9.8 points on a 10-point scale.

scholarly journals Effects of the Marinating Process on the Quality of the Domesticated Reindeer (Rangifer Tarandus) By-products

2020 ◽  
Author(s):  
Ilya Benzik ◽  
Inna Brazhnaia ◽  
Elena Bogdan ◽  
Alexander Ershov
Keyword(s):  
Rangifer Tarandus ◽  
New Technologies ◽  
Raw Materials ◽  
Educational Institution ◽  
Food Product ◽  
Production Costs ◽  
Federal State ◽  
Production Technologies ◽  
By Products

The development of methods for the complete and complex processing of raw food materials is one of the main ways to achieve the efficiency of its use: reduce production costs, expand products range and increase products demand. Over the last years, growing attention is paid to the search and development of new technologies of the processing of non-traditional and underutilized types of food materials, such as meat and by-products from alternative animal species. The research was aimed at studying the influence of the marinating process on the quality of the newly developed food product. The object of research was the tongue of domesticated reindeer, the underutilized raw materials of the Kola Peninsula. Product samples were taken in 2012-2016 on the basis of the agricultural production cooperative ”Tundra”, research was carried out on the basis of the Department of Food Production Technologies of the Federal State Budgetary Educational Institution of Higher Education ”Murmansk State Technical University”. The effects of marinating and duration of heat treatment on the quality of the product samples was studied. The parameters characterizing the generalized indicator of quality were selected - organoleptic (appearance, flavor and taste), physical (cutting force) and microbiological. The optimal composition of the marinade is proposed. The technology of culinary processing of the domesticated reindeer tongue was optimized.

scholarly journals Optimization of quality indicators of raw milk and dairy products

2021 ◽  
Vol 282 ◽  
pp. 06007
Author(s):  
Tatiana Ananeva ◽  
Vera Ostroukhova
Keyword(s):  
Quality Indicators ◽  
Dairy Products ◽  
Raw Milk ◽  
Raw Material ◽  
Expert Assessment ◽  
Chemical Parameters ◽  
Milk Processing ◽  
Microbiological Safety ◽  
Physico Chemical ◽  
Milk And Dairy Products

Milk is a part of many food products. In the expert assessment of raw material quality, primary attention should be paid to its microbiological safety, since poisoning with dairy products is a common cause of gastrointestinal tract diseases. The experiment was conducted on the basis of the Educational and Production Livestock Complex of the FSBEI HE RSAU – MAA n.a. K.A. Timiryazev (city of Moscow). The purpose of the study is to optimize the quality indicators of raw milk and dairy products. A method of raw milk processing has been studied to reduce the number of potentially dangerous microorganisms in the products produced from it. The fact of changes in organoleptic and physico-chemical parameters under the influence of an electromagnetic field is established; the quantitative and qualitative composition of milk and yogurt microorganisms is assessed. The article describes the issues of ensuring the microbiological safety of raw milk and suggests a method for optimizing the sanitary and hygienic indicators of dairy products, in accordance with the current requirements of regulatory documents.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Impact of Raw Materials and Processing Techniques on The Microbiological Quality of Egyptian Domiati Cheese

2020 ◽  
Keyword(s):  
Raw Materials ◽  
Microbiological Quality ◽  
Raw Milk ◽  
Plate Count ◽  
E Coli ◽  
Fresh Cheese ◽  
Processing Techniques ◽  
The Impact ◽  
Total Yeast

Domiati cheese is the most popular brand of cheese ripened in brine in the Middle East in terms of consumed quantities. This study was performed to investigate the impact of the microbiological quality of the used raw materials, the applied traditional processing techniques and ripening period on the quality and safety of the produced cheese. Three hundred random composite samples were collected from three factories at Fayoum Governorate, Egypt. Collected samples represent twenty-five each of: raw milk, table salt, calf rennet, microbial rennet, water, environmental air, whey, fresh cheese, ripened cheese & swabs from: worker hands; cheese molds and utensils; tanks. All samples were examined microbiologically for Standard Plate Count (SPC), coliforms count, Staphylococcus aureus (S. aureus) count, total yeast & mould count, presence of E. coli, Salmonellae and Listeria monocytogenes (L. monocytogenes). The mean value of SPC, coliforms, S. aureus and total yeast & mould counts ranged from (79×102 CFU/m3 for air to 13×108 CFU/g for fresh cheese), (7×102 MPN/ cm2 for tank swabs to 80×106 MPN/ml for raw milk), (9×102 CFU/g for salt to 69×106 CFU/g for fresh cheese) and (2×102 CFU/cm2 for hand swabs to 60×104 CFU/g for fresh cheese), respectively. Whereas, E. coli, Salmonella and L. monocytogenes failed to be detected in all examined samples. There were significant differences in all determined microbiological parameters (p ≤0.05) between fresh and ripened cheese which may be attributed to different adverse conditions such as water activity, pH, salt content and temperature carried out to improve the quality of the product.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

Selection and evaluation of suppliers as a quality control element for bakery products

2021 ◽  
pp. 21-25
Author(s):  
Natalia A. Jurk ◽  
Keyword(s):  
Physicochemical Parameters ◽  
Raw Materials ◽  
Objective Assessment ◽  
Expert Assessment ◽  
Control Element ◽  
Bakery Products ◽  
Regulatory Documents ◽  
Tree Diagram ◽  
Organoleptic Parameters

The article presents research in the field of quality management by suppliers of dairy whey to a bakery enterprise in the Omsk region. The general assessment criteria are systematized in the form of a tree diagram, which makes it possible to identify them depending on the target orientation. When evaluating suppliers, such fundamental elements as the quality of purchased raw materials, their cost and timeliness of delivery were taken into account. The results of an expert assessment of the organoleptic parameters of serum, controlled physicochemical parameters and subsequent regression analysis made it possible to establish their compliance with the requirements of regulatory documents. A comprehensive assessment of the possibilities allowed us to give an objective assessment, as well as to make a decision on choosing in favor of one of the suppliers.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

scholarly journals TECHNICAL AND TECHNOLOGICAL SOLUTIONS FOR PREPARING FLAX RAW MATERIALS FOR PROCESSING

2021 ◽  
pp. 227-237
Author(s):  
Yu. Вerezovsky ◽  
T. Kuzmina ◽  
M. Yedynovych ◽  
G. Boyko ◽  
N. Lyalina ◽  
...  
Keyword(s):  
Raw Materials ◽  
Hollow Structure ◽  
Weather Conditions ◽  
Raw Material ◽  
Hollow Structures ◽  
Adverse Weather Conditions ◽  
Adverse Weather ◽  
Long Time ◽  
Experimental Researches

The article contains theoretical and experimental researches in the field of the preservation of flax raw material of high moisture content. In the article, factors that are worsening the quality of flax raw material, resulting in non-observance of agrotechnical and technological requirements of preparing, collecting, harvesting the stem material, adverse weather conditions and other factors, are considered. The objective of this paper is to study the influence of preservation agents’ concentrations and of hollow structure device on the quality of flax raw material during long-time storage. In the article, the influence of aqueous preservatives’ concentration, humidity, storage length on the quality of fibrous products, obtained as a result of processing stem material, is analyzed. The influence of the device of hollow structures, as an alternative to preservatives, on the storage process of bast crops stem material was evaluated. The method of flax retted straw storage is described, actions of the main factors influence on the strength of fibers are analyzed. It is demonstrated, that prolongation of flax raw material preservation time can be made by using preservatives without considerable wastes of quality.

Sign in / Sign up

Export Citation Format

Share Document