scholarly journals SINTESIS KOMPOSIT KITOSAN/MgO/Ag DAN ANALISIS EFEKTIVITASNYA SEBAGAI ANTIBAKTERI

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Shintya Maryani ◽  
Henry F Aritonang ◽  
Vanda S Kamu
Keyword(s):  
Escherichia Coli ◽  
Staphylococcus Aureus ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Coprecipitation Method ◽  
Gram Positive ◽  
Gram Negative ◽  
X Ray ◽  
Ag Particles ◽  
Scanning Electron

Penelitian tentang sintesis komposit kitosan/MgO/Ag dengan variasi massa prekursor AgNO3 0,05 g, 0,1 g, 0,15 g dan 0,2 g disintesis dengan metode kopresipitasi. Komposit yang dihasilkan dikarakterisasi menggunakan X-Ray Diffractometry (XRD) dan Scanning Electron Microscope (SEM). Selanjutnya, keefektifan komposit ini sebagai antibakteri diuji yaitu Staphylococcus aureus (Gram positif) dan Escherichia coli (Gram negatif). Hasil penelitian menunjukkan bahwa puncak karakteristik partikel MgO dan Ag tidak muncul pada difraktogram XRD, tetapi secara visual dan morfologis SEM mendukung pembentukan dua partikel dan berdasarkan literatur dari hasil peneliti lain. Selain itu, komposit ini efektif dalam menghambat pertumbuhan kedua bakteri.       ABSTRACT Research on the synthesis of chitosan/MgO/Ag composites with variations in the mass of AgNO3 precursors 0.05 g, 0.1 g, 0.15 g and 0.2 g were synthesized by the coprecipitation method. The resulting composites were characterized using X-Ray Diffractometry (XRD) and Scanning Electron Microscope (SEM). Furthermore, the effectiveness of this composite as an antibacterial was tested, namely Staphylococcus aureus (Gram positive) and Escherichia coli (Gram negative). The results showed that the characteristic peaks of MgO and Ag particles did not appear on the XRD diffractogram, but visually and morphologically SEM supported the formation of two particles and based on the literature from the results of other researchers. In addition, this composite is effective in inhibiting the growth of both bacteria.

scholarly journals PEMBUATAN NANOKOMPOSIT KITOSAN/TiO2/Ag DAN ANALISIS AKTIVITASNYA SEBAGAI ANTIBAKTERI

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Gladys K Bungan ◽  
Henry F Aritonang ◽  
Audy D Wuntu
Keyword(s):  
Escherichia Coli ◽  
Staphylococcus Aureus ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chitosan Membrane ◽  
Ag Particles ◽  
Scanning Electron

Penelitian tentang pembuatan nanokomposit kitosan/TiO2/Ag telah dilakukan dengan menggunakan TiO2sebanyak6 gram dan konsentrasi AgNO3 yaitu 5 mM menggunakan metode reduksi dan impregnasi. Nanokomposit yang dihasilkan dikarakterisasi menggunakan X-Ray diffractometry (XRD), Scanning Electron Microscope-Energy Dispersive x-Ray Spectroscopy (SEM-EDS) dan menganalisis aktivitasnya sebagai anti bakteri terhadap Staphylococcus aureus (Gram positif) dan Escherichia coli (gram negatif). Hasil penelitian menunjukkan bahwa ukuran nanokomposit yang dihasilkan sebesar 56,93 nm. Difraktogram XRD muncul puncak karakteristik partikel TiO2 tetapi partikel Ag kurang terlihat jelas. Namun, berdasarkan data EDS, kedua partikel ini ditemukan pada membran kitosan. Ini menunjukkan bahwa sangat sedikit partikel Ag yang terbentuk atau keterbatasan alat XRD dalam mendeteksi sejumlah kecil partikel. Namun demikian, nanokomposit menunjukkan kemampuannya untuk menghambat pertumbuhan kedua bakteri ini.ABSTRACTResearch on the manufacture of chitosan/TiO2/Ag nanocomposites has been carried out using 6 grams of TiO2 and 5 mM AgNO3 using reduction and impregnation methods.The resulting nanocomposites were characterized using X-Ray diffraction (XRD), Scanning Electron Microscope-Energy Dispersive x-Ray Spectroscopy (SEM-EDS) and analyzed their activity as anti-bacteria against Staphylococcus aureus (Gram positive) and Escherichia coli (gram negative).The results showed that the resulting nanocomposite size was 56.93 nm. The XRD diffractogram showed the peak characteristics of TiO2 particles but the Ag particles were less visible.However, based on EDS data, the two particles were found on the chitosan membrane. This indicates that very few Ag particles are formed or the limitations of XRD devices in detecting a small number of Ag particles.However, the nanocomposites demonstrated their ability to inhibit the growth of these two bacteria.

scholarly journals AKTIVITAS ANTI BAKTERI NANO PARTIKEL PERAK (NPP) HASIL BIOSINTESIS MENGGUNAKAN EKSTRAK KELADI SARAWAK Alocasia macrorrhizosTERHADAP Staphylococcus aureus DAN Escherichia coli

2022 ◽  
Vol 7 (1) ◽  
pp. 76-85
Author(s):  
Athiah Masykuroh ◽  
Heny Puspasari
Keyword(s):  
Escherichia Coli ◽  
Staphylococcus Aureus ◽  
Surface Plasmon Resonance ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Scanning Electron

Biosintesis Nano partikel perak (NPP) pada penelitian ini dilakukan dengan bantuan ekstrak air tanaman keladi sarawak Alocasia macrorrhizos sebagai bioreduktor dengan variasi konsentrasi larutan AgNO3 sebesar 0,05 M ; 0,10 M dan 0,15 M. Studi keberhasilan pembentukan NPP didasarkan pada pengamatan perubahan warna dan terbentuknya Surface Plasmon Resonance (SPR) dengan bantuan instrumen Spektofotometer UV-Visibel dan Scanning Electron Microscope (SEM). Uji Aktivitas antibakteri dilakukan dengan metode difusi kertas cakram. Hasil analisis menunjukkan bahwa NPP terbentuk maksimum pada panjang gelombang maksimum 450,00 nm yaitu pada variasi konsentrasi larutan AgNO3 0,15 M. Uji morfologi menggunakan SEM menunjukkan partikelnya berbentuk batang (nanorods) dengan ukuran diameter rata-rata masing-masing variasi 826,44 nm (0,05 M), 283,44 nm (0,10 M) dan 266,33 nm (0,15 M). NPP hasil biosintesis menunjukkan aktivitas antibakteri terhadap kedua jenis bakteri Staphylococcus aureus dan Escherichia coli pada pengenceran konsentrasi masing-masing variasi NPP sebesar 50%. Kata kunci :nanopartikel perak, keladi sarawak, staphylococcus aureus, escherichia coli

X-ray micro tomography in the scanning electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 106-107 ◽  
Author(s):  
W. Brünger
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Target Surface ◽  
The Body ◽  
X Rays ◽  
Cross Sectional ◽  
X Ray ◽  
Micro Tomography ◽  
Scanning Electron

Reconstructive tomography is a new technique in diagnostic radiology for imaging cross-sectional planes of the human body /1/. A collimated beam of X-rays is scanned through a thin slice of the body and the transmitted intensity is recorded by a detector giving a linear shadow graph or projection (see fig. 1). Many of these projections at different angles are used to reconstruct the body-layer, usually with the aid of a computer. The picture element size of present tomographic scanners is approximately 1.1 mm2.Micro tomography can be realized using the very fine X-ray source generated by the focused electron beam of a scanning electron microscope (see fig. 2). The translation of the X-ray source is done by a line scan of the electron beam on a polished target surface /2/. Projections at different angles are produced by rotating the object.During the registration of a single scan the electron beam is deflected in one direction only, while both deflections are operating in the display tube.

PHAX-SCAN: Functional integration of a Scanning Electron Microscope and an energy-dispersive x-ray analyser

1989 ◽  
Vol 47 ◽  
pp. 56-57
Author(s):  
Marc H. Peeters ◽  
Max T. Otten
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
Functional Integration ◽  
Energy Dispersive ◽  
X Rays ◽  
X Ray ◽  
High Speed Analysis ◽  
Scanning Electron

Over the past decades, the combination of energy-dispersive analysis of X-rays and scanning electron microscopy has proved to be a powerful tool for fast and reliable elemental characterization of a large variety of specimens. The technique has evolved rapidly from a purely qualitative characterization method to a reliable quantitative way of analysis. In the last 5 years, an increasing need for automation is observed, whereby energy-dispersive analysers control the beam and stage movement of the scanning electron microscope in order to collect digital X-ray images and perform unattended point analysis over multiple locations.The Philips High-speed Analysis of X-rays system (PHAX-Scan) makes use of the high performance dual-processor structure of the EDAX PV9900 analyser and the databus structure of the Philips series 500 scanning electron microscope to provide a highly automated, user-friendly and extremely fast microanalysis system. The software that runs on the hardware described above was specifically designed to provide the ultimate attainable speed on the system.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

scholarly journals Influence of the Nb and V Addition on the Microstructure and Corrosion Resistance of the Fe-B-Co-Si Alloy

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4045
Author(s):  
Rafał Mech ◽  
Jolanta Gąsiorek ◽  
Amadeusz Łaszcz ◽  
Bartosz Babiarczuk
Keyword(s):  
Corrosion Resistance ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Significant Influence ◽  
Corrosion Performance ◽  
X Ray ◽  
Final Performance ◽  
Differential Calorimeter ◽  
Comparison Of The Results ◽  
Scanning Electron

The paper presents a comparison of the results of the corrosion resistance for three Fe-B-Co-Si-based newly developed alloys with the addition of Nb and V. The corrosion performance differences and microstructure variations were systematically studied using scanning electron microscope, electric corrosion equipment, X-ray diffractometer, and differential calorimeter. It has been shown that each alloying addition increased the corrosion resistance. The highest corrosion resistance obtained by potentiodynamic polarization was found for the alloy with both Nb and V addons (Fe57Co10B20Si5Nb4V4) and lowest in the case of the basic four-element Fe62Co15B14Si9 material. This shows that the proper choice of additions is of significant influence on the final performance of the alloy and allows tailoring of the material for specific applications.

scholarly journals Characterizing Severely Plastically Deformed Materials Using Transmission Kikuchi Diffraction and Energy Dispersive X-ray Spectroscopy in the Scanning Electron Microscope

2013 ◽  
Vol 19 (S2) ◽  
pp. 692-693
Author(s):  
P. Trimby
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Energy Dispersive ◽  
X Ray ◽  
Scanning Electron

Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.

Photoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved Liquid Phase Deposition

2015 ◽  
Vol 1120-1121 ◽  
pp. 419-423
Author(s):  
Cai Xia Lei ◽  
X.L. Jiang ◽  
Y. Liu ◽  
X. Liu ◽  
Y.T. Ma ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Liquid Phase ◽  
Scanning Electron Microscope ◽  
Reaction Temperature ◽  
White Light ◽  
Photoelectrochemical Properties ◽  
Liquid Phase Deposition ◽  
X Ray ◽  
Good Crystallinity ◽  
Scanning Electron

In this paper, the hydrothermal-assisted liquid phase deposition (HT-LPD) method has been developed to prepare TiO2 films. The crystalline structures and morphologies of as-prepared TiO2 films were analyzed using an X-ray diffractometer (XRD) and scanning electron microscope (SEM). It was found that the HT-LPD TiO2 film showed good crystallinity with preferrred orientation along c-axis. Moreover, the as-prepared TiO2 films consisted of two layers, with the tiny nanoparticles as the underlying layer and the flower-like clusters as the upper layer. The photoelectrochemical measurements revealed that, when illuminated by the white light, the HT-LPD TiO2 films exhibited a more negative photopotential value and an increased photocurrent value with elevated reaction temperature, excepting for the sample prerared at 150 °C. In summary, the TiO2 films prepared by the improved LPD method could be served as the promising photoanode for the photoelectrochemical applications.

Effect of the Neodymium Content on Mechanical Properties of the Electro-Brush Plated Nano-Al2O3/Ni Composite Coating

2012 ◽  
Vol 525-526 ◽  
pp. 277-280
Author(s):  
Guo Jin ◽  
Xiu Fang Cui ◽  
Er Bao Liu ◽  
Qing Fen Li
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Composite Coating ◽  
Nanoindentation Test ◽  
X Ray Diffraction ◽  
X Ray ◽  
Small Cracks ◽  
Scanning Electron

The effect of the neodymium content on mechanical properties of the electro-brush plated nanoAl2O3/Ni composite coating was investigated in this paper. The microstructure and phase structure were studied with scanning electron microscope (SEM) and X-ray diffraction (XRD). The hardness and abrasion properties of several coatings with different neodymium content were studied by nanoindentation test and friction / wear experiment. Results show that the coatings are much finer and more compact when the neodymium was added, and the hardness and abrasion property of the coatings with neodymium were improved obviously. Besides, the small cracks conduced by the upgrowth stress in the coatings were ameliorated when the rare earth neodymium was added. The improvement mechanism was further discussed.

Sign in / Sign up

Export Citation Format

Share Document