scholarly journals Aerodynamic Performance of Biomimicry Snake-Shaped Airfoil

2019 ◽  
Vol 9 (2) ◽  
pp. 3319-3323
Keyword(s):  
Cross Section ◽  
Lift Coefficient ◽  
Design Parameters ◽  
Drag Forces ◽  
Cross Section Shape ◽  
Section Shape ◽  
Wide Range ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

The cross-section shape and proportionality between geometrical dimensions are the most important design parameters of any lifting surfaces. These parameters affect the amount of the aerodynamic forces that will be generated. In this study, the focus is placed on the snake-cross-section airfoil known as the S-airfoil. It is found that there is a lack of available researches on S-airfoil despite its important characteristics. A parametric study on empty model of the S-airfoil with a cross-section shape that is inspired by the Chrysopelea paradise snake is conducted through numerical simulation. Simulation using 2D-ANSYS FLUENT17 software is used to generate the lift and drag forces to determine the performance of airfoil aerodynamic. Based on the results, the S-airfoil can be improved in performance of aerodynamic by reducing the thickness at certain range, whereby changing the thickness-to-chord ratio from 0.037 to 0.011 results in the increment of lift-to-drag ratio from 2.629 to 3.257. On other hand, increasing the height-to-chord ratio of the S-airfoil will increase maximum lift coefficient but drawback is a wide range of angles of attack regarding maximum lift-to-drag ratio. Encouraging results obtained in this study draws attention to the importance of expanding the research on S-airfoil and its usage, especially in wind energy.

scholarly journals A Perturbation Method to Analyze the Effect of Cross Section and Angle of Attack for Some Conical Bodies in Hypersonic Flow

2010 ◽  
Vol 3 (1) ◽  
pp. 52-58
Author(s):  
N. Talebanfard ◽  
A. B. Rahimi
Keyword(s):  
Perturbation Method ◽  
Cross Section ◽  
Cross Sections ◽  
Angle Of Attack ◽  
The Body ◽  
Drag Forces ◽  
Lift And Drag ◽  
Flow Variables ◽  
Drag Ratio ◽  
Lift To Drag Ratio

An analysis is performed to study the supersonic flow over conical bodies of three different cross sections circular, elliptic and squircle (square with rounded corners) shaped. Perturbation method is applied to find flow variables analytically. In order to find lift and drag forces the pressure force on the body is found, the component along x is drag and the component along z is lift. Three equations are obtained for lift to drag ratio of each cross section. The graphs for L/D show that for a particular cross section an increase in angle of attack, increases L/D. Comparing L/D in the three mentioned cross sections it is obtained that L/D is the greatest in squircle then in ellipse and the least in circle. The results have applications in design of flying objects such as airplanes where many more seats can be arranged in ellipse and or squircle cross section compared to regular circular case.

scholarly journals Shape Optimization of the Cross-Section for Noncircular Hypersonic Missile Forebody

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Jingfan Chen ◽  
Xiaoqiang Fan ◽  
Bing Xiong ◽  
Yi Wang
Keyword(s):  
Shape Optimization ◽  
Cross Section ◽  
Parametric Modeling ◽  
Cross Section Shape ◽  
Section Shape ◽  
The Cross ◽  
Wide Speed Range ◽  
Optimization Efficiency ◽  
Drag Ratio ◽  
Lift To Drag Ratio

In the hypersonic regime, noncircular missiles have attracted significant attention from researchers. The paper first summarizes the development and present situation of the noncircular missiles at home and abroad. Previous research found that the cross-section shape of missiles has a direct influence on the aerodynamics performance. To find the best cross-section shape in terms of lift-drag-ratio, an efficient and robust shape optimization framework is developed. Class/shape function transformation (CST) method and power-law curve are introduced to complete the parametric modeling of the noncircular missile. The evolutionary algorithm has been utilized to improve the optimization efficiency. A combination of script and journal files is written to automate the CAD loft, mesh generation, and CFD simulations process. Finally, the forebody section of a missile body is chosen as an example to deliver the whole optimization steps. The optimization results show that the lift-to-drag ratio increases from 1.8 to 2.4 when the hypersonic missile forebody cruises at the design condition. The results also demonstrate that the optimized configuration has a better aerodynamic performance than the original one over a wide speed range from Mach 2 to 8 and a wide attack of angle range from 0 to 30.

scholarly journals Stress and Shape Analysis of a Paraglider Wing

1965 ◽  
Vol 32 (4) ◽  
pp. 771-780 ◽  
Author(s):  
Robert W. Fralich
Keyword(s):  
Structural Analysis ◽  
Shape Analysis ◽  
Numerical Results ◽  
Internal Stresses ◽  
Flexible Wing ◽  
Aerodynamic Pressure ◽  
Drag Forces ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

A combined aerodynamic-structural analysis is made which is based on the assumption that the sail is flexible and has freedom to take the shape which the aerodynamic pressure and the internal stresses dictate. Numerical results were obtained for Newtonian impact aerodynamic theory and were compared with published results obtained for a rigid idealization of the paraglider wing. It was found that the assumed rigid idealization did not approximate the shape of a flexible wing well and led to significant errors in the lift and drag forces and the lift-to-drag ratio. The new calculations provide a basis for design of paragliders for hypersonic flight.

The Effects of Recessed Lower Surface Shape on the Lift and Drag of Conical Wings at High Incidence and High Mach Number

1975 ◽  
Vol 26 (1) ◽  
pp. 1-10 ◽  
Author(s):  
L C Squire
Keyword(s):  
Theoretical Study ◽  
Lift Coefficient ◽  
Lower Surface ◽  
Surface Shape ◽  
Wide Range ◽  
High Incidence ◽  
Design Value ◽  
High Mach ◽  
Lift And Drag ◽  
Drag Ratio

SummaryFor lifting re-entry there may be advantages in using wings which give as high a lift coefficient as possible at the design value of the lift/drag ratio. This paper presents the results of an experimental and theoretical study of wings with recessed lower surfaces designed to give high values of CL. The calculations show that a wide range of wing shapes can be found that give values of CL which are much larger than those on a flat wing with the same lift/drag ratio.

Effects of smart flap on aerodynamic performance of sinusoidal leading-edge wings at low Reynolds numbers

2020 ◽  
pp. 095441002094690
Author(s):  
AA Mehraban ◽  
MH Djavareshkian ◽  
Y Sayegh ◽  
B Forouzi Feshalami ◽  
Y Azargoon ◽  
...  
Keyword(s):  
High Performance ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Drag Forces ◽  
Wide Range ◽  
Beam Bending ◽  
Low Reynolds ◽  
Lift And Drag ◽  
Drag Ratio

Sinusoidal leading-edge wings have shown a high performance after the stall region. In this study, the role of smart flaps in the aerodynamics of smooth and sinusoidal leading-edge wings at low Reynolds numbers of 29,000, 40,000 and 58,000 is investigated. Four wings with NACA 634-021 profile are firstly designed and then manufactured by a 3 D printer. Beam bending equation is used to determine the smart flap chord deflection. Next, wind tunnel tests are carried out to measure the lift and drag forces of proposed wings for a wide range of angles of attack, from zero to 36 degrees. Results show that using trailing-edge smart flap in sinusoidal leading-edge wing delays the stall point compared to the same wing without flap. However, a combination of smooth leading-edge wing and smart flap advances the stall. Furthermore, it is found that wings with smart flap generally have a higher lift to drag ratio due to their excellent performance in producing lift.

scholarly journals Shape Optimization of NREL S809 Airfoil for Wind Turbine Blades Using a Multiobjective Genetic Algorithm

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Yilei He ◽  
Ramesh K. Agarwal
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbine ◽  
Lift Coefficient ◽  
Optimization Technique ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Multiobjective Genetic Algorithm ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

The goal of this paper is to employ a multiobjective genetic algorithm (MOGA) to optimize the shape of a well-known wind turbine airfoil S809 to improve its lift and drag characteristics, in particular to achieve two objectives, that is, to increase its lift and its lift to drag ratio. The commercially available software FLUENT is employed to calculate the flow field on an adaptive structured mesh using the Reynolds-Averaged Navier-Stokes (RANS) equations in conjunction with a two-equationk-ωSST turbulence model. The results show significant improvement in both lift coefficient and lift to drag ratio of the optimized airfoil compared to the original S809 airfoil. In addition, MOGA results are in close agreement with those obtained by the adjoint-based optimization technique.

scholarly journals Lift and Drag Coefficient Map of NACA4415 Airfoil

2021 ◽  
Vol 2076 (1) ◽  
pp. 012066
Author(s):  
Rui Yin ◽  
Jing Huang ◽  
Zhi-Yuan He
Keyword(s):  
Reynolds Number ◽  
Drag Coefficient ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Aerodynamic Characteristics ◽  
Optimal Angle ◽  
Fluent Software ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Abstract The NACA4415 airfoil was numerically simulated with the help of the Fluent software to analyze its aerodynamic characteristics. Results are acquired as follows: The calculation accuracy of Fluent software is much higher than that of XFOIL software; the calculation result of SST k-ω(sstkw) turbulence model is closest to the experimental value; within a certain range, the larger the Reynolds number is, the larger the lift coefficient and lift-to-drag ratio of the airfoil will be, and the smaller the drag coefficient will be; when the angle of attack is less than the optimal angle of attack, the Reynolds number has less influence on the lift-to-drag coefficient and the lift-to-drag ratio; as the Reynolds number increases, the optimal angle of attack increases slightly, and the applicable angle of attack range for high lift-to-drag ratios becomes smaller.

scholarly journals Effects of Pitching Motion Elements on Aerodynamic Characteristics of Airfoil

2021 ◽  
Vol 2076 (1) ◽  
pp. 012078
Author(s):  
Rui Yin ◽  
Jing Huang ◽  
Zhi-Yuan He
Keyword(s):  
Drag Coefficient ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Aerodynamic Characteristics ◽  
Initial Angle ◽  
Pitching Motion ◽  
The Difference ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Abstract The aerodynamic characteristics of NACA4412 airfoil with different pitching motion elements were compared and analyzed based on CFD in this research. The results are acquired as follows: the difference between the lift and drag coefficients of the airfoil during pitch up and pitch down motions becomes larger with the increase of the pitching amplitude or initial angle of attack; as the pitching amplitude increases, the lift coefficient grows slightly greater and the drag coefficient grows much greater; as the initial angle of attack increases, the lift coefficient grows much greater and the drag coefficient grows slightly; the smaller the attenuation frequency is, the larger the lift-to-drag ratio of the airfoil will be.

scholarly journals THE EFFECTS OF ANGLE OF ATTACK, REYNOLD NUMBERS AND WINGLET STRUCTURE ON THE PERFORMANCE OF CESSNA 172 SKYHAWK

2018 ◽  
Vol 10 (1) ◽  
pp. 61
Author(s):  
Henny Pratiwi
Keyword(s):  
Wind Tunnel ◽  
Drag Force ◽  
Lift Coefficient ◽  
Angle Of Attack ◽  
Balsa Wood ◽  
Wingtip Vortex ◽  
The One ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

This research aims to investigate the effects of angle of attack, Reynold numbers and winglet structure on the performance of Cessna 172 Skyhawk aircraft with winglets variation design. Winglets improve efficiency by diffusing the shed wingtip vortex, which reducing the drag due to lift and improving the wing’s lift over drag ratio. In this research, the specimens are the duplicated of Cesnna 172 Skyhawk wing with 1:40 ratio made of balsa wood. There are three different winglet designs that are compared with the one without winglet. The experiments are conducted in an open wind tunnel to measure the lift and drag force with Reynold numbers of 25,000 and 33,000. It can be concluded that the wings with winglets have higher lift coefficient than wing without winglet for both Reynold numbers. It was also found that all wings with winglets have higher lift-to-drag ratio than wings without winglet where the blended 45o cant angle has the highest value.

scholarly journals Water Energy Resource Innovation on the Cavitation Characteristics

2020 ◽  
Vol 143 (2) ◽  
Author(s):  
Mohammad D. Qandil ◽  
Ahmad I. Abbas ◽  
Tarek ElGammal ◽  
Ahmad I. Abdelhadi ◽  
Ryoichi S. Amano
Keyword(s):  
Volume Fraction ◽  
Energy Resource ◽  
Inverse Correlation ◽  
Cavitation Number ◽  
Drag Forces ◽  
Lift And Drag ◽  
Work Done ◽  
Drag Ratio ◽  
Lift To Drag Ratio ◽  
Upstream Flow

Abstract The main purpose of this study is to numerically correlate the amount of generated vapor over a hydrofoil to the lift and drag coefficients acting on it. Cavitation characteristics were investigated of a hydrofoil in the cavitating, sub-cavitating, and non-cavitating flows for different angles of attacks (AoA) with the high upstream flow velocity. The hydrofoil was tested in a square water tunnel with water entering the tunnel at various velocities for each AoA ranges from 9.1 m/s to 12.2 m/s. It was found that lift and drag forces acting on the hydrofoil follow the trend of the experimental data quite closely. While the cavitation can be identified by a unique number (averaged vapor volume fraction), the work done created an inverse correlation between this number and the cavitation number at the same angle of attack. The lift force declines with the increase in the vapor content on the hydrofoil surface, meanwhile the drag force peaks at certain vapor volume fraction, and then, a huge reduction occurs with the considerable decrease in the corresponding cavitation number. A fourth-order correlation generated between the lift to drag (L/D) and the cavitation number (σ). It was found the lift-to-drag ratio decreases by the formation of the cavitation over the hydrofoil, thus causing a drop in the efficiency of the turbomachines.

Sign in / Sign up

Export Citation Format

Share Document