ORGANIZATION OF AUDITING OPERATING EXPENSES OF ENTERPRISE

Author(s):  
Stepanenko

The purpose of the study is to study the organization and procedure for conducting an audit of operating expenses of the enterprise. Materials and methods. The study used research methods such as monographs and synthesis (when analyzing existing publications), analysis, induction and deduction, comparisons and key components. Research results. The essence of the audit is to provide practical assistance to the management and economic services of the enterprise in the management and management of its finances, as well as the establishment of financial and management accounting, providing various consultations. Audit can be divided into the following stages: organizational, pilot, final. Operating expenses are a major component of an enterprise's costs. These are the costs associated with the main activity of the enterprise (production of products, services, performance of work). According to P (C) BO 16 “Expenses” to operating expenses include administrative expenses, sales expenses, other operating expenses. Expenditure audit entities may include: accounting policies, cost accounting transactions, records in primary documents, accounting records and reporting, information on accounting misconduct, and abuses that have been documented in audit acts, audits, auditors' reports. The audit of costs should begin with the verification of the statement of financial results to confirm the accuracy of its performance, the study of the organization of production (if the enterprise is engaged in production) and technological processes, the study of cost estimates, planned calculations and other conditions. When reviewing the accumulation and write-off of administrative expenses, sales costs and other operating expenses, the auditor should check the correctness of the classification of expenses to administrative, sales and other operating expenses. The following techniques are used to collect audit evidence: document verification, confirmation, counting, surveys, analytical procedures. Through the procedures of observation, questioning and confirmation, they obtain the supporting information contained in the accounting records. The calculation procedure consists in checking the arithmetic accuracy of the primary documents and accounting records or in performing the calculations independently (inventory). Analytical procedures involve the analysis of the most important indicators and ratios, including a summary study of deviations and relationships that conflict with other information relevant to the case or deviate from the expected indicators. During the cost audit, the auditor checks the appropriateness of the formulas used in the calculations, the correctness of the calculation procedures (the amount of tests depends on the materiality of the estimated values). Conclusions. Operating expense audit is an integral part of an enterprise's overall audit. Improving organizational aspects of cost audit is associated with deepening the practice of analytical procedures at all stages of the audit. For organization of internal audit of expenses at the enterprise it is necessary to carry out regular control of correctness of their formation.

Author(s):  
Nataliia Kostyshyn ◽  
Yulia Kovalchuk

The article considers modern aspects of the use, accounting and taxation of business cards, which are currently an integral part of communication and exchange of contacts in the business world. In particular, the essence of the concept of “business card” is studied, which is a carrier of information not only about the person-owner, but usually also contains information about the activities of the enterprise where its owner works. The classification of business cards into personal, business and corporate depending on their application and the information presented on them is systematized. Particular attention is paid to business cards, which are also a tool for advertising, as well as corporate, because, when they are distributed is the primary information to society, business partners about the company (company) and its activities. The authors substantiate why business cards are not an “additional benefit”, because they are issued to employees not for his personal purposes, but to achieve business goals of the employer: expanding customer base, increasing sales, making a profit, etc., in addition, companies do not give them in the property, but only oblige employees to use such cards during contacts with various participants in economic activity. Accordingly, the influence of such a decision on the process of taxation of the manufacture of this type of business cards is shown. The peculiarities of displaying information on the movement of business cards in the account, which requires their identification as “assets”, or rather – “stocks”, because they fully meet the criteria for defining these terms, presented in the legislation of Ukraine. Business cards are a controlled material resource of the enterprise, in which in the past certain funds or other stocks are invested, and in the future it is expected to receive from their distribution economic effect – benefit, it is an asset of the enterprise. Analytical accounts are offered to detail information on the cost of self-made or purchased business cards, which will facilitate the formation of clear management reports, will provide specific information for internal analysis. The sequence of reflection in the accounting of expenses at the time of transfer (write-off from the balance) of business cards depending on the center of responsibility with the use of certain primary documents is given.


2017 ◽  
Vol 31 (2) ◽  
pp. 82-89
Author(s):  
E. S. Epifanov

This article presents a classification of major factors that shape the cost of Internet site. Also discusses the limitations in determining the objectives of the web site; advantages and disadvantages of different factors.


Author(s):  
Anita Kant ◽  
Shweta Mendiratta

Background: There has been an increase in rate of cesarean section over last five decades. This is a matter of international public health concern as it increases the cesarean section related maternal morbidity. The aim of the present study was to audit the increasing rate of caesarean section.Methods: In the present study, all cases delivered by cesarean section during the period of six months were recorded and classified according to Robson's 10 group classification system. This was an attempt to see which clinically relevant groups contributed most to the cesarean deliveries.Results: There was a trend of increased percentage of cesarean section in group 5 and 2 respectively in present study. Increasingly sedentary lifestyle and poor tolerance to pain are adding to cesarean delivery on maternal request.Conclusions: We should judiciously make use of vaginal birth after cesarean section but not at the cost of maternal or fetal health. Standardization of indication of cesarean deliveries, regular audits and definite protocols in                                                                                                                                                                                                                                                                                                                                 hospital will aid in curbing the rate of cesarean deliveries in hospitals.


Author(s):  
Taigib Kamilovich Musaev

The article presents the methodology for organizing and conducting an internal audit of cost accounting and calculating the cost of products (works, services) of auxiliary industries. The sequence of conducting internal audit of costs in the subdivisions of the auxiliary sphere is proposed. Working papers were developed within the proposed methodology for internal cost control


2015 ◽  
Vol 757 ◽  
pp. 153-157
Author(s):  
Zhi Xue Sun ◽  
Yang Zhang

The paper mainly studied the parametric drawing system of shaft based on feature. Firstly, the shaft was classified, and its characteristic was analyzed. Then, the special menu and image block menu of the system were designed in AutoCAD. And a friendly-interface parametric drawing system of shaft was built with geometry sculpts technology, object-oriented technology and parametric design technology, based on the platform of AutoCAD, with the development tool of Object ARX. It implemented the drawing of hardware working drawing of shaft according to the selected proportion, and improved the efficiency of the shaft design.Overview of shaftShaft is one of the main parts of machinery, depending on the axis shape; shaft can be divided into two categories: direct axis and crank shaft. According to the different load of the nature, direct axis can be divided into three types: spindle, drive shaft and the shaft. According to different shape, direct axis can be divided into two kinds: optical axis and stepped shaft. Optical axis has the following characteristics: simple shape, easy processing, less stress concentration source, optical axis is mainly used for drive shaft; Stepped shaft, in contrast to the optical axis. It is often used in the shaft. The classification of the shaft can be clearly said to use figure 1. In addition, there are some special shaft, such as the camshaft and wire soft shaft, etc.Fig. 1 Classification of the shaftOn the basis of the characteristics, the shaft information model can be considered. Usually a mechanical parts contains numerous features, shape features are the most important characteristics of these, which is the carrier of other information. We can decompose research the shape feature and think that some auxiliary features and the main features combined shape feature of axis, the main characteristics of the spatial position is adjacency relations; Auxiliary features is attached to a primary, auxiliary features can be attached to the main outline of the surface or end[1].Combining with the actual situation of this system, we analyze the features of commonly used straight shaft parts; we obtained the shape of the feature classification results as shown in table1.Table 1 Straight shaft parts classification of shape feature


Mathematics ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1522
Author(s):  
Ricardo F. Díaz ◽  
Blanca Sanchez-Robles

Increases in the cost of research, specialization and reductions in public expenditure in health are changing the economic environment for the pharmaceutical industry. Gains in productivity and efficiency are increasingly important in order for firms to succeed in this environment. We analyze empirically the performance of efficiency in the pharmaceutical industry over the period 2010–2018. We work with microdata from a large sample of European firms of different characteristics regarding size, main activity, country of origin and other idiosyncratic features. We compute efficiency scores for the firms in the sample on a yearly basis by means of non-parametric data envelopment analysis (DEA) techniques. Basic results show a moderate average level of efficiency for the firms which encompass the sample. Efficiency is higher for companies which engage in manufacturing and distribution than for firms focusing on research and development (R&D) activities. Large firms display higher levels of efficiency than medium-size and small firms. Our estimates point to a decreasing pattern of average efficiency over the years 2010–2018. Furthermore, we explore the potential correlation of efficiency with particular aspects of the firms’ performance. Profit margins and financial solvency are positively correlated with efficiency, whereas employee costs display a negative correlation. Institutional aspects of the countries of origin also influence efficiency levels.


2019 ◽  
Vol 2019 (4) ◽  
pp. 119-126
Author(s):  
CH Bekmurotov ◽  

The article reviewed the certification and quality control of the technological process for the production of vegetable oil. There is a procedure for packaging, quality control of products, determination of quality indicators and quality control of finished products. The procedure for using refined cottonseed oil and its varieties, the requirements for placement and storage of vegetable oils, as specified in the regulatory documents, the quality control of vegetable oils and other solutions for cottonseed oil are provided. The gas analyzer shows a solution for measuring the amount of solution by painting the tubes of a mixture of gas and air in oil. Detailed information on the production of vegetable oils, the cost of raw materials, the level of fat content of cotton seeds and the methods used to produce oil from cotton seeds. Methods for certification of vegetable oils, types of quality control, methods of testing and quality determination are presented. It was shown that the procedure for refined production of cottonseed oils and their types, as well as the state of the product classification of products based on the method of producing vegetable oils for consumer purposes, analysis of the sequence of refined oils and refining processes.


2019 ◽  
Vol 4 (1) ◽  
pp. 28-42
Author(s):  
Suprianto Suprianto ◽  
Bina Andari ◽  
Yely Sulistyawati

This study aims to evaluate the calculation of cost of production. The accuracy of the calculation of cost of production is influenced by the suitability in the accumulation and calculation of production costs which includes the cost of raw materials, direct labor costs and other costs (factory overhead costs). This research was conducted at UKM UD. Usaha Baru which aims to determine the calculation of cost of production at UD. Usaha Baru and to find out whether the calculation of cost of production is in accordance with the full costing method. The technique (method) of data analysis used in this study is quantitative analysis. Data collection techniques use interview techniques directly to obtain information from the number of units of monthly production, raw material costs, direct labor costs, and factory overhead costs, as well as other information relating to the calculation of cost of production. Based on the evaluation results for the calculation of raw material costs and labor costs are in accordance with the full costing method. However, the calculation of factory overhead costs is not in accordance with the full costing method because there are costs that have not been included in the calculation of production costs.


2021 ◽  
Author(s):  
Indrajeet Kumar ◽  
Jyoti Rawat

Abstract The manual diagnostic tests performed in laboratories for pandemic disease such as COVID19 is time-consuming, requires skills and expertise of the performer to yield accurate results. Moreover, it is very cost ineffective as the cost of test kits is high and also requires well-equipped labs to conduct them. Thus, other means of diagnosing the patients with presence of SARS-COV2 (the virus responsible for COVID19) must be explored. A radiography method like chest CT images is one such means that can be utilized for diagnosis of COVID19. The radio-graphical changes observed in CT images of COVID19 patient helps in developing a deep learning-based method for extraction of graphical features which are then used for automated diagnosis of the disease ahead of laboratory-based testing. The proposed work suggests an Artificial Intelligence (AI) based technique for rapid diagnosis of COVID19 from given volumetric CT images of patient’s chest by extracting its visual features and then using these features in the deep learning module. The proposed convolutional neural network is deployed for classifying the infectious and non-infectious SARS-COV2 subjects. The proposed network utilizes 746 chests scanned CT images of which 349 images belong to COVID19 positive cases while remaining 397 belong negative cases of COVID19. The extensive experiment has been completed with the accuracy of 98.4 %, sensitivity of 98.5 %, the specificity of 98.3 %, the precision of 97.1 %, F1score of 97.8 %. The obtained result shows the outstanding performance for classification of infectious and non-infectious for COVID19 cases.


Author(s):  
G.T. Aitkenova ◽  

The results of the study of the classification of occupational safety costs, in particular the classification of costs for medical examinations, according to the current requirements of the regulatory legal acts and documents of the Republic of Kazakhstan are presented. The Labor Code of the Republic of Kazakhstan does not regulate the cost of financing occupational safety costs in the organizations. In addition, there are no state-approved methodology for planning and occupational safety budgeting costs. International research in the field of occupational safety confirms the positive effect of the investments in occupational safety on the competitiveness, productivity, and sustainability of the enterprise at the market. At the same time, the methodologically sound organization of planning and financing of occupational safety costs depends on their correct classification, which further contributes to the construction of a rational budgetary system of the enterprise in the field of occupational safety. The need for cost classification is due to the fact, that the existing occupational safety activities have different signs and types of costs. In the process of the study the empirical data is used, for example, codes, laws, and other regulatory legal acts of the Republic of Kazakhstan, as well as the scientific research from near and far abroad. The paper offers three signs of the classification of occupational safety costs. In accordance with the proposed signs of cost classification, the types of medical examinations that employers are legally required to conduct for their employees are distributed. Thus, the classification of occupational safety costs, which is aimed at the cost management, should consider all the main options for solving managerial tasks of the enterprise in the field of occupational safety, and should be applicable in practice. At the same time, the classification of costs with varying degrees of detail contributes to the sound planning and financing of the costs for employee occupational safety, which will lead to a positive result from the investment.


Sign in / Sign up

Export Citation Format

Share Document