Application of Innovative Hydroxyapatite Materials in 3D Printing for Biocompatible Voice Implants

2018 ◽  
Vol 69 (4) ◽  
pp. 840-842
Author(s):  
Wojciech Musialik ◽  
Marcin Nabialek ◽  
Slawomir Letkiewicz ◽  
Andrei Victor Sandu ◽  
Katarzyna Bloch
Keyword(s):  
3D Printing ◽  
Surgical Procedures ◽  
Bacterial Infections ◽  
Fungal Infections ◽  
Colloidal Silver ◽  
Bone Implants ◽  
External Ring ◽  
Voice Prostheses ◽  
3D Printers ◽  
Silver Composite

The paper presents the possibility of using an innovative hydroxyapatite filament Ca10(PO4)6(OH)2 for printing in 3D printers of bone implants and the possibility of using it during implantation with voice prostheses. The introduction of an additional colloidal silver composite in voice implants will contribute to the reduction of bacterial infections, fungal infections and granulomatous hyperplasia. The creation of a stable external ring of the vocal fistula will remove complications associated with it with enlargement of the fistula and leakiness of voice implants. The ability to print with a hydroxyapatite filament will allow digital pre-surgery modeling of bone implants suited to the needs of surgical procedures.

Heterocycle Compounds with Antimicrobial Activity

2020 ◽  
Vol 26 (8) ◽  
pp. 867-904 ◽  
Author(s):  
Maria Fesatidou ◽  
Anthi Petrou ◽  
Geronikaki Athina
Keyword(s):  
Heterocyclic Compounds ◽  
Bacterial Infections ◽  
Scientific Community ◽  
Antimicrobial Agents ◽  
Fungal Infections ◽  
Biological Activities ◽  
Literature Survey ◽  
New Findings ◽  
Wide Range ◽  
Number Of Microorganisms

Background: Bacterial infections are a growing problem worldwide causing morbidity and mortality mainly in developing countries. Moreover, the increased number of microorganisms, developing multiple resistances to known drugs, due to abuse of antibiotics, is another serious problem. This problem becomes more serious for immunocompromised patients and those who are often disposed to opportunistic fungal infections. Objective: The objective of this manuscript is to give an overview of new findings in the field of antimicrobial agents among five-membered heterocyclic compounds. These heterocyclic compounds especially five-membered attracted the interest of the scientific community not only for their occurrence in nature but also due to their wide range of biological activities. Method: To reach our goal, a literature survey that covers the last decade was performed. Results: As a result, recent data on the biological activity of thiazole, thiazolidinone, benzothiazole and thiadiazole derivatives are mentioned. Conclusion: It should be mentioned that despite the progress in the development of new antimicrobial agents, there is still room for new findings. Thus, research still continues.

scholarly journals Community-acquired and hospital-acquired respiratory tract infection and bloodstream infection in patients hospitalized with COVID-19 pneumonia

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Kirstine K. Søgaard ◽  
Veronika Baettig ◽  
Michael Osthoff ◽  
Stephan Marsch ◽  
Karoline Leuzinger ◽  
...  
Keyword(s):  
Intensive Care ◽  
Tract Infection ◽  
Respiratory Tract ◽  
Respiratory Tract Infection ◽  
Bloodstream Infection ◽  
Bacterial Infections ◽  
Fungal Infections ◽  
Icu Patients ◽  
Hospital Acquired Infections ◽  
Hospital Acquired

Abstract Objectives SARS-CoV-2 may cause acute lung injury, and secondary infections are thus relevant complications in patients with COVID-19 pneumonia. However, detailed information on community- and hospital-acquired infections among patients with COVID-19 pneumonia is scarce. Methods We identified 220 SARS-CoV-2-positive patients hospitalized at the University Hospital Basel, Switzerland (between 25 February and 31 May 2020). We excluded patients who declined the general consent (n = 12), patients without clinical evidence of pneumonia (n = 29), and patients hospitalized for < 24 h (n = 17). We evaluated the frequency of community- and hospital-acquired infections using respiratory and blood culture materials with antigen, culture-based, and molecular diagnostics. For ICU patients, all clinical and microbial findings were re-evaluated interdisciplinary (intensive care, infectious disease, and clinical microbiology), and agreement reached to classify patients with infections. Results In the final cohort of 162 hospitalized patients (median age 64.4 years (IQR, 50.4–74.2); 61.1% male), 41 (25.3%) patients were admitted to the intensive care unit, 34/41 (82.9%) required mechanical ventilation, and 17 (10.5%) of all hospitalized patients died. In total, 31 infections were diagnosed including five viral co-infections, 24 bacterial infections, and three fungal infections (ventilator-associated pneumonia, n = 5; tracheobronchitis, n = 13; pneumonia, n = 1; and bloodstream infection, n = 6). Median time to respiratory tract infection was 12.5 days (IQR, 8–18) and time to bloodstream infection 14 days (IQR, 6–30). Hospital-acquired bacterial and fungal infections were more frequent among ICU patients than other patients (36.6% vs. 1.7%). Antibiotic or antifungal treatment was administered in 71 (43.8%) patients. Conclusions Community-acquired viral and bacterial infections were rare among COVID-19 pneumonia patients. By contrast, hospital-acquired bacterial or fungal infections were frequently complicating the course among ICU patients.

Designing Inclusion: Using 3D Printing to Maximize Adapted Physical Education Participation

2021 ◽  
pp. 004005992110101
Author(s):  
A. Chloe Simpson ◽  
Andrea Ruth Taliaferro
Keyword(s):  
3D Printing ◽  
Student Success ◽  
Assistive Technology ◽  
Adapted Physical Education ◽  
Physical Educators ◽  
Related Service ◽  
3D Printers ◽  
3D Printed ◽  
Education Participation ◽  
Individual Design

While assistive technology is often suggested as a way to increase, maintain, or improve functional ability for individuals with disabilities within physical activity (PA) settings, cost and availability of such items are often noted as barriers. In recent years, 3D printing has become available to the general public through the adoption of 3D printers in schools, libraries, and universities. Through individual design and rapid prototyping, 3D printing can support physical educators in accommodating student need for assistive technology through a multitude of modification possibilities. This article will highlight the capacity for 3D printed assistive technology within educational settings, and will illustrate how teachers, APE specialists, and other related service personnel can utilize this technology to support student success in PE and PA settings. This article will also assist practitioners with locating, uploading, and utilizing existing collections of 3D assistive technology models from open-source websites, such as Thingiverse.

scholarly journals Evaluation of the Ability to Accurately Produce Angular Details by 3D Printing of Plastic Parts

Machines ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 150
Author(s):  
Andrei Marius Mihalache ◽  
Gheorghe Nagîț ◽  
Laurențiu Slătineanu ◽  
Adelina Hrițuc ◽  
Angelos Markopoulos ◽  
...  
Keyword(s):  
3D Printing ◽  
Point Of View ◽  
Vertex Angle ◽  
Function Type ◽  
Constant Height ◽  
3D Printers ◽  
3D Printed ◽  
Mathematical Processing ◽  
Plastic Parts

3D printing is a process that has become widely used in recent years, allowing the production of parts with relatively complicated shapes from metallic and non-metallic materials. In some cases, it is challenging to evaluate the ability of 3D printers to make fine details of parts. For such an assessment, the printing of samples showing intersections of surfaces with low angle values was considered. An experimental plan was designed and materialized to highlight the influence of different factors, such as the thickness of the deposited material layer, the printing speed, the cooling and filling conditions of the 3D-printed part, and the thickness of the sample. Samples using areas in the form of isosceles triangles with constant height or bases with the same length, respectively, were used. The mathematical processing of the experimental results allowed the determination of empirical mathematical models of the power-function type. It allowed the detection of both the direction of actions and the intensity of the influence exerted by the input factors. It is concluded that the strongest influence on the printer’s ability to produce fine detail, from the point of view addressed in the paper, is exerted by the vertex angle, whose reduction leads to a decrease in printing accuracy.

scholarly journals Foundation Piles—A New Feature for Concrete 3D Printers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2545
Author(s):  
Marcin Hoffmann ◽  
Krzysztof Żarkiewicz ◽  
Adam Zieliński ◽  
Szymon Skibicki ◽  
Łukasz Marchewka
Keyword(s):  
3D Printing ◽  
Rapid Development ◽  
Construction Materials ◽  
Shallow Foundation ◽  
Soil Reinforcement ◽  
3D Printer ◽  
Permanent Formwork ◽  
3D Printers ◽  
New Feature ◽  
The Cost

Foundation piles that are made by concrete 3D printers constitute a new alternative way of founding buildings constructed using incremental technology. We are currently observing very rapid development of incremental technology for the construction industry. The systems that are used for 3D printing with the application of construction materials make it possible to form permanent formwork for strip foundations, construct load-bearing walls and partition walls, and prefabricate elements, such as stairs, lintels, and ceilings. 3D printing systems do not offer soil reinforcement by making piles. The paper presents the possibility of making concrete foundation piles in laboratory conditions using a concrete 3D printer. The paper shows the tools and procedure for pile pumping. An experiment for measuring pile bearing capacity is described and an example of a pile deployment model under a foundation is described. The results of the tests and analytical calculations have shown that the displacement piles demonstrate less settlement when compared to the analysed shallow foundation. The authors indicate that it is possible to replace the shallow foundation with a series of piles combined with a printed wall without locally widening it. This type of foundation can be used for the foundation of low-rise buildings, such as detached houses. Estimated calculations have shown that the possibility of making foundation piles by a 3D printer will reduce the cost of making foundations by shortening the time of execution of works and reducing the consumption of construction materials.

Not just vegetations: focal myocardial changes in patients with fungal infections

2020 ◽  
pp. 1-6
Author(s):  
Nicole M. Cresalia ◽  
Sonal T. Owens ◽  
Terri L. Stillwell ◽  
Mark D. Norris ◽  
Sunkyung Yu ◽  
...  
Keyword(s):  
Length Of Stay ◽  
Bacterial Infections ◽  
Fungal Infections ◽  
Positive Culture ◽  
Hospital Length ◽  
Hospital Length Of Stay ◽  
Similar Proportion ◽  
Retrospective Case ◽  
Fungal Endocarditis ◽  
Catheter Tip

Abstract Background: Fungal endocarditis classically involves dense heterogenous vegetations. However, several patients with fungal infections were noted to have myocardial changes ranging from focal brightening to nodular thickening of chordae or papillary muscles. This study evaluates whether these findings are associated with fungal infections. Methods: In a retrospective case–control study, paediatric inpatients with fungal infections (positive blood, urine, or catheter tip culture) in a 5-year period were matched 1:1 to inpatients without positive fungal cultures. Echocardiograms were scored on a 5-point scale by two independent readers for presence of myocardial brightenings, nodular thickenings, and vegetations. Clinical data were compared. Results: Of 67 fungal cases, positive culture sites included blood (n = 44), vascular catheter tip (n = 7), and urine (n = 29); several had multiple positive sites. “Positive” echo findings (score ≥ 2+) were more frequent in the Fungal Group (33 versus 18%, p = 0.04). Fungal Group patients with “positive” versus “negative” echo findings had similar proportion of bacterial infections. Among fungal cases, those with “positive” echo findings had longer hospital length of stay than cases with “negative” echos (median 58 versus 40 days, p = 0.03) but no difference in intensive care unit admission, extracorporeal membranous oxygenation support, or mortality. Conclusions: Myocardial and papillary muscle brightening with nodular thickening on echocardiogram appear to be associated with fungal infections. There may be prognostic implications of these findings as patients with “positive” echo have longer length of stay. Further studies are needed to better understand the mechanism and temporal progression of these changes and determine the prognostic value of this scoring system.

C-Reactive Protein as A Fungal Infection Marker in Acute Leukemia Patients

2021 ◽  
Vol 27 (2) ◽  
pp. 212
Author(s):  
Brigitte Rina Aninda Sidharta ◽  
JB. Suparyatmo ◽  
Avanti Fitri Astuti
Keyword(s):  
Acute Leukemia ◽  
Predictive Value ◽  
Bacterial Infections ◽  
Fungal Infections ◽  
Lymphoblastic Leukemia ◽  
Negative Likelihood Ratio ◽  
Receiver Operating Curve ◽  
High Morbidity ◽  
C Reactive Protein ◽  
Reactive Protein

Invasive Fungal Infections (IFIs) can cause serious problems in cancer patients and may result in high morbidity andmortality. C-reactive protein levels increase in response to injury, infection, and inflammation. C-reactive protein increasesin bacterial infections (mean of 32 mg/L) and in fungal infections (mean of 9 mg/L). This study aimed to determineC-Reactive Protein (CRP) as a marker of fungal infections in patients with acute leukemia by establishing cut-off values ofCRP. This study was an observational analytical study with a cross-sectional approach and was carried out at the Departmentof Clinical Pathology and Microbiology of Dr. Moewardi Hospital in Surakarta from May until August 2019. The inclusioncriteria were patients with acute leukemia who were willing to participate in this study, while exclusion criteria were patientswith liver disease. There were 61 samples consisting of 30 male and 31 female patients with ages ranging from 1 to 70 years.Fifty-four patients (88.5%) were diagnosed with Acute Lymphoblastic Leukemia (ALL) and 30 (49.18%) were in themaintenance phase. The risk factors found in those patients were neutropenia 50-1500 μL (23.8%), use of intravenous line(22%), and corticosteroid therapy for more than one week (20.9%). The median of CRP in the group of patients with positiveculture results was 11.20 mg/L (11.20-26.23 mg/L) and negative culture results in 0.38 mg/L (0.01-18.63 mg/L). The cut-offvalue of CRP using the Receiver Operating Curve (ROC) was 9.54 mg/L (area under curve 0.996 and p. 0.026), with a sensitivityof 100%, specificity of 93.2%, Positive Predictive Value (PPV) of 33.3%, Negative Predictive Value (PPV) of 100%, PositiveLikelihood Ratio (PLR) of 1.08, Negative Likelihood Ratio (NLR) of 0 and accuracy of 93.4%. C-reactive protein can be used asa screening marker for fungal infections in patients with acute leukemia.

scholarly journals Beta-Glucanemia after Coronary Artery Bypass Graft Surgery: A Case Report

2018 ◽  
Vol 4 (4) ◽  
pp. 114 ◽  
Author(s):  
Ashley Styczynski ◽  
Hector Bonilla ◽  
Elizabeth Treynor ◽  
Jolly Shashank ◽  
Yonglong Zhang ◽  
...  
Keyword(s):  
Coronary Artery ◽  
Coronary Artery Bypass ◽  
Surgical Procedures ◽  
Limit Of Detection ◽  
Fungal Infections ◽  
Biological Effects ◽  
Artery Bypass ◽  
Bypass Graft ◽  
Cape Cod ◽  
Blood Salvage

Blood salvage techniques are increasingly being used during surgical procedures to reduce the need for exogenous blood products. The blood recovered from the surgical field through aspiration or absorption by surgical sponges is reinfused into a patient. A 65-year old patient who underwent coronary artery bypass grafting using blood salvage techniques developed a fever on post-op day 3 and was noted to have an elevated β-d-glucan level, a marker of systemic fungal infections. Ultimately, no fungal infection was identified, β-d-glucan levels slowly decreased and the patient demonstrated clinical improvement. To determine whether blood salvage procedures led to his elevated β-d-glucan levels, the surgical sponges were tested for elutable levels of β-d-glucan. The β-d-glucan content of the eluents was measured using the Fungitell® IVD kit (Associates of Cape Cod, Inc.; East Falmouth, MA). The β-d-glucan levels were found to be in concentrations 10,000-times greater than the limit of detection for human serum. While various studies have demonstrated both the immunomodulatory and pro-inflammatory effects of β-d-glucan, the physiologic impact of such high levels of β-d-glucan post-operatively remains unknown. Additionally, the persistence of detectable β-d-glucan up to several weeks after surgical procedures presents a challenge for the diagnosis of invasive fungal infections. Further studies are needed to assess the beta-glucanemia-related safety of surgical materials and their potential biological effects.

scholarly journals Implementing a 3D printing service in a biomedical library

2017 ◽  
Vol 105 (1) ◽  
Author(s):  
Verma Walker, MLIS
Keyword(s):  
Problem Solving ◽  
3D Printing ◽  
3D Modeling ◽  
Three Dimensional ◽  
National Institutes Of Health ◽  
3D Printer ◽  
Service Model ◽  
Steep Learning Curve ◽  
3D Printers ◽  
Creative Problem

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work.

Sign in / Sign up

Export Citation Format

Share Document