scholarly journals TECHNICAL MEASURES TO DECREASE HEAT ENERGY CONSUMPTION OF FINAL CUSTOMER IN MULTI-APARTMENT BUILDINGS ACCORDING TO ENERGY EFFICIENCY DIRECTIVE / TECHNINĖS PRIEMONĖS, SKIRTOS MAŽINTI GALUTINIO VARTOTOJO ŠILUMINĖS ENERGIJOS VARTOJIMĄ DAUGIABUČIUOSE GYVENAMU

2015 ◽  
Vol 7 (4) ◽  
pp. 461-467 ◽  
Author(s):  
Romanas Savickas ◽  
Lauryna Savickienė ◽  
Juozas Bielskus
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Heat Energy ◽  
Hot Water ◽  
Individual Member ◽  
Technical Solution ◽  
Improve Energy Efficiency ◽  
Individual Member State ◽  
Decrease Energy Consumption ◽  
Heat Metering

Energy consumption in the world increases, so the measures in order to improve energy efficiency must be found. The aim of 2012/27/EU Energy Efficiency Directive targets is to decrease energy consumption for a final energy consumer by 1.5% every year, but there is no definition how these targets could be achieved by an individual member state. This article presents the analysis how these targets could be achieved by the means of individual heat metering by heat cost allocators for every flat thus decreasing an energy consumption for a final consumer. Statistical analysis of identical buildings with individual metering by heat cost allocators and without them is presented. Heat cost allocators do not decrease energy consumption by themselves, so this article presents a technical solution and a set of additional equipment, i.e. thermostatic valves, balance valves, hot water meters and remote data collection system that must be installed. The final results show that the targets of 2012/27/EU Energy Efficiency Directive in Lithuania can be reached, because the buildings with individual heat cost allocators consume about 20–30% less of heat energy. Pasaulyje energijos vartojimas auga, todėl turi būti rastos energetinio efektyvumo pagerinimo priemonės. 2012/27/ES Energijos Efektyvumo Direktyvos tikslas yra sumažinti galutinio energijos vartotojo energijos suvartojimą kasmet po 1,5 %, tačiau nėra nurodyta, kaip kiekviena valstybė narė šiuos tikslus galėtų įgyvendinti. Šis straipsnis pristato analizę, kaip šie tikslai galėtų būti pasiekti, kiekviename bute įrengiant individualios šilumos apskaitos šilumos daliklius, kad sumažėtų energijos vartojimas atskiruose butuose. Pateikta statistinė identiškų pastatų su šilumos dalikliais ir be jų analizė. Šiluminei energijai taupyti neužtenka vien tik šilumos daliklių, todėl straipsnyje pateiktas techninis sprendimas – būtinų įdiegti techninių priemonių paketas, kurį sudaro tokios priemonės: termostatiniai ventiliai, balansiniai ventiliai, karšto vandens skaitikliai, belaidė reguliaraus duomenų nuskaitymo sistema. Galutiniai analizės rezultatai rodo, kad 2012/27/ES Energijos Efektyvumo Direktyvos tikslai Lietuvoje gali būti pasiekti, nes pastatai su individualia šilumos apskaita ir įrengtais šilumos dalikliais vartoja apie 20–30 % mažiau šiluminės energijos nei pastatai be tokios apskaitos.

scholarly journals Measures to improve energy efficiency of building utility systems

2021 ◽  
Vol 48 (2) ◽  
pp. 73-80
Author(s):  
A. S. Gavrilov ◽  
A. E. Sergeev
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Systems Engineering ◽  
The State ◽  
Hot Water ◽  
Water Supply Systems ◽  
Technical Equipment ◽  
Building Energy Efficiency ◽  
Improve Energy Efficiency ◽  
Utility Systems

Objective. The goal of the study is to identify ways to improve energy efficiency by conducting a comprehensive analysis of engineering systems of a house, taking into account the existing model of energy supply and by monitoring the indicators of influence on the efficiency of engineering and technical equipment. Methods. The main method is based on a survey of the level of energy efficiency of heating and hot water supply systems. Results. The article discusses the concept of energy efficiency of a building, energy efficiency class, main utility systems of a residential building, indicators of influence on the state of systems, engineering component and ways to improve it. The article addresses issues related to a full analysis of existing systems in order to assess the implementation of necessary energy-saving measures, as well as their risks and benefits. The possibilities of controlling energy consumption and efficiency of works carried out due to the reconstruction of utility systems of the building have been determined. The results of the analysis of energy-efficient measures, and the feasibility of implementing each of them have been determined in order to identify optimal solutions. Conclusion. Increasing the energy efficiency of building utility systems is one of the priority tasks for creating comfortable living conditions. The energy efficiency class of building utility systems is established according to the state of a system, takes into account all quality indicators for energy consumption, and the energy certificate fully shows the level of energy efficiency.

scholarly journals GLOBAL TRENDS IN THE DEVELOPMENT OF ENERGY-SAVING TECHNOLOGIES

2020 ◽  
pp. 31-43
Author(s):  
S. Gushchin ◽  
A. Seminenko ◽  
Chao Shen
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Saving ◽  
State Level ◽  
Hot Water ◽  
Energy Resources ◽  
Historical Background ◽  
Modern World ◽  
Improve Energy Efficiency ◽  
The World

The need to provide heat, hot water and electricity are the basic needs of society, and throughout the history of mankind, they form the greatest demand for energy resources. In the modern world, energy consumption by countries all over the world is constantly increasing; it’s creating new problems such as lack of energy resources, their rise in price, depletion of energy sources, environmental threats, and others. In connection with the problem of saving, rational and efficient use of energy resources and huge energy losses in the construction industry, this article considers world experience of application of energy-saving technologies and other measures to improve energy efficiency, analyzes the current situation in the field of energy saving in Russia. Prerequisites to the study of energy efficiency problems are considered, state of energy consumption and energy saving in China, USA, some EU countries and Russia is analyzed, the world experience of application ways of energy efficiency improving at the state level is considered. The problems and historical background that hinder the development of Russia in the field of energy saving are discussed. Specific proposals to improve energy efficiency in Russia have been put forward based on an analysis of international experience.

scholarly journals Technological Energy Efficiency Improvements in Cement Industries

2021 ◽  
Vol 13 (7) ◽  
pp. 3810
Author(s):  
Alessandra Cantini ◽  
Leonardo Leoni ◽  
Filippo De Carlo ◽  
Marcello Salvio ◽  
Chiara Martini ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Descriptive Analysis ◽  
Cement Industry ◽  
Cement Plant ◽  
Improve Energy Efficiency ◽  
Energy Needs ◽  
Industrial Energy ◽  
Industrial Energy Consumption ◽  
Alternative Solutions

The cement industry is highly energy-intensive, consuming approximately 7% of global industrial energy consumption each year. Improving production technology is a good strategy to reduce the energy needs of a cement plant. The market offers a wide variety of alternative solutions; besides, the literature already provides reviews of opportunities to improve energy efficiency in a cement plant. However, the technology is constantly developing, so the available alternatives may change within a few years. To keep the knowledge updated, investigating the current attractiveness of each solution is pivotal to analyze real companies. This article aims at describing the recent application in the Italian cement industry and the future perspectives of technologies. A sample of plant was investigated through the analysis of mandatory energy audit considering the type of interventions they have recently implemented, or they intend to implement. The outcome is a descriptive analysis, useful for companies willing to improve their sustainability. Results prove that solutions to reduce the energy consumption of auxiliary systems such as compressors, engines, and pumps are currently the most attractive opportunities. Moreover, the results prove that consulting sector experts enables the collection of updated ideas for improving technologies, thus giving valuable inputs to the scientific research.

scholarly journals Enhancing energy efficiency of an existing housing stock

2021 ◽  
Vol 2 (47) ◽  
pp. 3-10
Author(s):  
K.V. Izmaylova ◽  
L.A. Kharchenko
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
User Behavior ◽  
Housing Stock ◽  
Cost Model ◽  
Positive Trend ◽  
Improve Energy Efficiency ◽  
Operation Period ◽  
Existing Housing ◽  
Full Operation

The article analyzes domestic and international experience in the field of energy efficiency and energy security. Thus, it was important to adopt the Law of Ukraine "On the Energy Efficiency of Buildings", which introduced mandatory certification of buildings by energy consumption classes. The study of sources on the issues of effective energy consumption showed that issues related to improving the energy efficiency of buildings and structures are acquiring special relevance; the use of foreign models to improve the energy efficiency of the housing stock. Specific organizational and economic measures are highlighted that will help improve the energy efficiency of the national economy. The Swedish experience of using a modern cost model for the full period of operation ("General Concept") is studied, which aims to assess the economic results of investments in measures to improve the energy efficiency of the housing stock. The main principles of the modern cost model of the full operation period and the criteria for determining the number of necessary energy efficiency measures are considered. Analyzed "hard" (physical condition of the building) and "soft" (user behavior) measures that provide for the integrated energy efficiency of the building. The stages of the analysis according to the cost model of the full operation period are considered. The typical for Sweden ranges of the duration of energy efficient measures and the requirements for the internal rate of return, which depends on the general economic situation in the country and the terms of the loan, have been investigated.  Based on the results of the energy audit of the ten-story building selected for the study and taking into account the experience of Sweden, a number of measures to improve energy efficiency are proposed and a calculation is given to ensure the energy efficiency of a residential building in Ukraine. Based on the results obtained, it can be concluded that there is a positive trend in this implementation. With the integrated use of all measures that will even allow you to save more, you can significantly improve the energy efficiency of the existing housing stock in Ukraine.

scholarly journals Real-Time Decision Making in First Mile and Last Mile Logistics: How Smart Scheduling Affects Energy Efficiency of Hyperconnected Supply Chain Solutions

Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1833 ◽  
Author(s):  
Tamás Bányai
Keyword(s):  
Energy Efficiency ◽  
Supply Chain ◽  
Energy Consumption ◽  
Real Time ◽  
Real Time Scheduling ◽  
Improve Energy Efficiency ◽  
Increase Energy Efficiency ◽  
Last Mile ◽  
Time Scheduling ◽  
Last Mile Delivery

Energy efficiency and environmental issues have been largely neglected in logistics. In a traditional supply chain, the objective of improving energy efficiency is targeted at the level of single parts of the value making chain. Industry 4.0 technologies make it possible to build hyperconnected logistic solutions, where the objective of decreasing energy consumption and economic footprint is targeted at the global level. The problems of energy efficiency are especially relevant in first mile and last mile delivery logistics, where deliveries are composed of individual orders and each order must be picked up and delivered at different locations. Within the frame of this paper, the author describes a real-time scheduling optimization model focusing on energy efficiency of the operation. After a systematic literature review, this paper introduces a mathematical model of last mile delivery problems including scheduling and assignment problems. The objective of the model is to determine the optimal assignment and scheduling for each order so as to minimize energy consumption, which allows to improve energy efficiency. Next, a black hole optimization-based heuristic is described, whose performance is validated with different benchmark functions. The scenario analysis validates the model and evaluates its performance to increase energy efficiency in last mile logistics.

scholarly journals Application of Rough Set Theory (RST) to Forecast Energy Consumption in Buildings Undergoing Thermal Modernization

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1309 ◽  
Author(s):  
Tomasz Szul ◽  
Stanisław Kokoszka
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Set Theory ◽  
Rough Set ◽  
Energy Demand ◽  
Rough Set Theory ◽  
Residential Buildings ◽  
Simple Procedure ◽  
Energy Performance ◽  
Improve Energy Efficiency

In many regions, the heat used for space heating is a basic item in the energy balance of a building and significantly affects its operating costs. The accuracy of the assessment of heat consumption in an existing building and the determination of the main components of heat loss depends to a large extent on whether the energy efficiency improvement targets set in the thermal upgrading project are achieved. A frequent problem in the case of energy calculations is the lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for a quick technical analysis of measures taken to improve energy efficiency in existing buildings. These methods should have satisfactory results in predicting energy consumption where the input is limited, inaccurate, or uncertain. Therefore, the aim of this work was to test the usefulness of a model based on Rough Set Theory (RST) for estimating the thermal energy consumption of buildings undergoing an energy renovation. The research was carried out on a group of 109 thermally improved residential buildings, for which energy performance was based on actual energy consumption before and after thermal modernization. Specific sets of important variables characterizing the examined buildings were distinguished. The groups of variables were used to estimate energy consumption in such a way as to obtain a compromise between the effort of obtaining them and the quality of the forecast. This has allowed the construction of a prediction model that allows the use of a fast, relatively simple procedure to estimate the final energy demand rate for heating buildings.

scholarly journals Evaluation of the Cost-Effectiveness of the Installation of Heat-Cost Allocators in Multifamily Buildings in Croatia

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 507 ◽  
Author(s):  
Sunčana Slijepčević ◽  
Davor Mikulić ◽  
Kristijan Horvat
Keyword(s):  
Energy Consumption ◽  
Cost Effectiveness ◽  
Net Present Value ◽  
Energy Savings ◽  
Heat Energy ◽  
Energy Prices ◽  
Present Value ◽  
Improve Energy Efficiency ◽  
Before And After ◽  
The Cost

In order to improve energy efficiency, the Croatian government introduced an individual metering obligation for all district heat network users. The purpose of the research was to evaluate this policy measure regarding its effects on tenants’ behavior and energy savings, but also from the perspective of cost-effectiveness. The sample includes approximately 20% of all Croatian users of district heat energy. Energy savings related to the installation of heat cost allocators are calculated by comparing the specific heat energy consumption, corrected for the number of heating degree days, in periods before and after the installation of the heat cost allocators. The cost-effectiveness assessment is based on the concept of the net present value. The transition to individual metering in Croatia resulted in significant energy savings averaged from 20 to 35%. However, low heat energy prices in cities with a dominant share of heat energy consumption did not ensure a positive net present value of investment for all buildings.

Heat Pumps for Energy Saving of Building Hot Water Supply

2011 ◽  
Vol 347-353 ◽  
pp. 587-590
Author(s):  
Qing Hai Luo ◽  
Zheng Zuo
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Water Supply ◽  
Energy Saving ◽  
Heat Pump ◽  
Heat Pumps ◽  
Hot Water ◽  
Low Energy ◽  
Water Heaters ◽  
Hot Water Supply

This paper analyzes the energy consumption of hot water supply in buildings and the insurmountable shortcoming of low energy efficiency of conventional water heaters, and investigates the progress and problems of developing heat pump water heaters. It is pointed out that developing of heat pump water heaters is one of the efficient approaches to improve the energy efficiency of hot water supply.

Overview of Energy Consumption Model for Manufacturing Processes

2011 ◽  
Vol 130-134 ◽  
pp. 2288-2293 ◽  
Author(s):  
Bing Bing Li ◽  
Hong Chao Zhang ◽  
Qing Di Ke ◽  
Li Ding ◽  
Lei Zhang
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Flow ◽  
Flow Analysis ◽  
Manufacturing Processes ◽  
Comprehensive Overview ◽  
Improve Energy Efficiency ◽  
Energy Consumption Model ◽  
Whole Life Cycle ◽  
Collection Methods

The energy consumption for manufacturing processes is the largest impact contributor in various characterization categories, based on the assessment of environmental effects during the whole life cycle. It is necessary to investigate the manufacturing processes in depth to find out mechanism that can improve energy efficiency. This paper presents a comprehensive overview on two important aspects of energy consumption models for manufacturing processes: 1) two data collection methods: top-down and bottom-up; 2) two process-based analytical methods: thermodynamic model (including energy flow analysis and exergy analysis), and mechanical model. These models can improve energy efficiency.

Sign in / Sign up

Export Citation Format

Share Document