scholarly journals Design of Visual Education Resource Library Based on 3D Modeling

Author(s):  
Dongmei Xia ◽  
Jing Li ◽  
Liang Zhou

There are some problems in the design of three-dimensional visualization teaching resources, such as less involved in interactive design, no unified design standards, the lack of effective innovation guidance mechanism and no unified evaluation system. Based on the design principle, taking amino acids as an example, this paper proposes a design plan for 3D visualization resources in teaching scenarios. According to the design scheme, the three-dimensional visualization resources are made. The main processes include the selection of the tools, the preparation and production of the material, the writing of the script, the design of the learning interface, the design of the interactive logic relationship and the control and output of the program. Finally, the three-dimensional visualization resources are used in the future classrooms with starC electronic double board and group touch screen, and the results are analyzed and evaluated. It is found that the three-dimensional visualization resources can effectively improve the students' interest in learning and help students understand knowledge.

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Tie Liu ◽  
Xu Yang ◽  
Yu Guo

The basic guarantee of promoting intelligent manufacturing ability of manufacturing enterprises is to enhance the comprehensive strength of the country and realize industrialization. Based on the coevolution strategy, considering the time and space structure, this paper determines that the path of manufacturing enterprises to promote intelligent manufacturing is adaptive, visionary, planned, and emerging. According to the factors influencing the promotion of intelligent manufacturing by manufacturing enterprises, the paper proposes the following steps: adaptive strategy path, vision strategic path, planned strategic path, and emerging strategy path. The paper constructs an evaluation system for manufacturing enterprises to promote the selection of intelligent manufacturing path with 25 evaluation indexes and establishes the three-dimensional model of promoting intelligent manufacturing path selection by using the combination of Choquet fuzzy integral method and SPACE method. Through the empirical analysis of ARR, it is found that the planned strategic path is the most suitable path to promote intelligent manufacturing, and the scientificity and objectivity of the three-dimensional path selection model are shown. It is of great theoretical innovation and practical significance to develop a new perspective for manufacturing enterprises to promote the research and selection of intelligent manufacturing path.


2021 ◽  
pp. 027347532199210
Author(s):  
Else-Marie van den Herik ◽  
Tim M. Benning

Free-riding is a serious challenge in group projects. While there are various methods to reduce free-riding, marketing educators still face a difficult task when selecting an appropriate method for their course. In this study, we propose a students’ preferences-based approach that supports marketing educators with the selection of methods to detect and handle free-riding. To measure these preferences, students completed an online survey based on a choice task about two methods to detect free-riding and a ranking task about four methods to handle free-riding ( n = 254). Their answers were analyzed using chi-squared tests, Borda scores, and rank-ordered logit models. The results show that (a) neither Dutch nor international students have a clear preference for one of the two detection methods (the reporting system vs. the process evaluation system), (b) grade discussion (a possible reduction of the free-rider’s grade based on a conversation with the course coordinator about each student’s contribution) is the most preferred method to handle free-riding, and (c) international students have a stronger preference for stricter handling methods. Marketing educators can apply the proposed approach, or use our specific findings, for designing methods to reduce free-riding in their courses.


2021 ◽  
Vol 7 (1) ◽  
pp. 540-555
Author(s):  
Hayley L. Mickleburgh ◽  
Liv Nilsson Stutz ◽  
Harry Fokkens

Abstract The reconstruction of past mortuary rituals and practices increasingly incorporates analysis of the taphonomic history of the grave and buried body, using the framework provided by archaeothanatology. Archaeothanatological analysis relies on interpretation of the three-dimensional (3D) relationship of bones within the grave and traditionally depends on elaborate written descriptions and two-dimensional (2D) images of the remains during excavation to capture this spatial information. With the rapid development of inexpensive 3D tools, digital replicas (3D models) are now commonly available to preserve 3D information on human burials during excavation. A procedure developed using a test case to enhance archaeothanatological analysis and improve post-excavation analysis of human burials is described. Beyond preservation of static spatial information, 3D visualization techniques can be used in archaeothanatology to reconstruct the spatial displacement of bones over time, from deposition of the body to excavation of the skeletonized remains. The purpose of the procedure is to produce 3D simulations to visualize and test archaeothanatological hypotheses, thereby augmenting traditional archaeothanatological analysis. We illustrate our approach with the reconstruction of mortuary practices and burial taphonomy of a Bell Beaker burial from the site of Oostwoud-Tuithoorn, West-Frisia, the Netherlands. This case study was selected as the test case because of its relatively complete context information. The test case shows the potential for application of the procedure to older 2D field documentation, even when the amount and detail of documentation is less than ideal.


2000 ◽  
Vol 6 (S2) ◽  
pp. 282-283
Author(s):  
Matthew Dougherty ◽  
Wah Chiu

Sophisticated tools are needed to examine the results of cyro-microscopy. As the size and resolution of three dimensional macromolecular structures steadily improve, and the speed at with which they can be generated increases, researchers are finding they are inundated with larger datasets and at the same time are compelled to expediently evaluate these structures in unforeseen ways. Integration of EM data with other types of information is becoming necessary and routine; for example X-ray data, 3D EM reconstructions, and theoretical models, must be evaluated in concert to discount or propose hypothesis. To create such tools, the developer must take into account not only the empirical and theoretical possibilities, but also they must master the human factors and computational limits. During the last five years, the National Center for Macromolecular Imaging (NCMI) has progressed from a remedial 3D visualization capability to a collection of visualization tools allowing researchers to focus on the discovery phase of biological research.


2016 ◽  
Vol 83 (4) ◽  
Author(s):  
Youlong Chen ◽  
Yong Zhu ◽  
Xi Chen ◽  
Yilun Liu

In this work, the compressive buckling of a nanowire partially bonded to an elastomeric substrate is studied via finite-element method (FEM) simulations and experiments. The buckling profile of the nanowire can be divided into three regimes, i.e., the in-plane buckling, the disordered buckling in the out-of-plane direction, and the helical buckling, depending on the constraint density between the nanowire and the substrate. The selection of the buckling mode depends on the ratio d/h, where d is the distance between adjacent constraint points and h is the helical buckling spacing of a perfectly bonded nanowire. For d/h > 0.5, buckling is in-plane with wavelength λ = 2d. For 0.27 < d/h < 0.5, buckling is disordered with irregular out-of-plane displacement. While, for d/h < 0.27, buckling is helical and the buckling spacing gradually approaches to the theoretical value of a perfectly bonded nanowire. Generally, the in-plane buckling induces smaller strain in the nanowire, but consumes the largest space. Whereas the helical mode induces moderate strain in the nanowire, but takes the smallest space. The study may shed useful insights on the design and optimization of high-performance stretchable electronics and three-dimensional complex nanostructures.


2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
T Fujiwara ◽  
N Takeda ◽  
M Hatano ◽  
S Nishimura ◽  
I Komuro

Abstract Background Pulmonary hypertension (PH) is characterized by increased pulmonary vascular resistance and right heart failure with progressive narrowing or occlusion of the pulmonary artery. However, the assessment of vascular remodeling is mostly limited to averaged increases in wall thickening, and even the role of vascular endothelial growth factor (VEGF), remains incompletely understood; Although abundantly expressed VEGF is expected to elicit angio-obliteration and the knockout of hypoxia inducible factor (HIF) prevents PH in mice, VEGF inhibitor Sugen exacerbates hypoxia (Hx)-induced PH model, which is referred to as VEGF paradox. Purpose To analyze three-dimensional (3D) spatiotemporal changes of pulmonary microstructure and function, which reflect the disease activity and lead to resolve the paradox. Methods and results We developed a novel 3D visualization system of microstructural networks in whole mouse organ with single-cell resolution, using combined tissue clearing technique called CUBIC and multiphoton excitation microscope. The system enabled the simultaneous 3D evaluation of microvascular structure, invaded macrophages and fibrosis with effective penetration of several mm (whole organ). Three-dimensional observations of PH mice models including Hx, Sugen/Hx, and human-like Alk1+/− hereditary PH models, revealed that not only inward (negative) microvessel remodeling with stenosis, but also marked elongation of microvascular ECs, was evident except Sugen/Hx model at the early phase, which had not been detected by 2D histological sections. Comparable transcriptome analysis revealed that PGC1α, which regulates HIF-independent VEGF expression and angiogenesis, plays an important role in the characteristic response for mitochondrial and microvascular maintenance. PGC1α was up-regulated in the early phage in Hx and Alk1+/− PH models with microvascular angiogenetic change, whereas Sugen/Hx-model did not increase PGC1α expression and did not show microvascular remodeling. Furthermore pulmonary ECs-specific PGC1α-deficient mice exacerbated Hx-PH model with decreased VEGF expression and microvessel density, and administration of Baicalin, a flavonoid enhancing PGC1α expression, ameliorated Hx-PH model with increased VEGF expression. Conclusions The 3D visualization system disclosed an unexpected change of angiogenic microvascular structure in the early phage of PH, which is regulated by EC PGC1α. Microvascular angiogenesis which is induced by up-regulation in PGC1α -VEGF pathway is a crucial factor for compensation of PH in the early phase, which provides a potential novel therapeutic target for PH. Figure 1 Funding Acknowledgement Type of funding source: Public grant(s) – National budget only. Main funding source(s): JSJP


Author(s):  
Maria E. Currie ◽  
Ana Luisa Trejos ◽  
Reiza Rayman ◽  
Michael W.A. Chu ◽  
Rajni Patel ◽  
...  

Objective The purpose of this study was to determine the effect of three-dimensional (3D) binocular, stereoscopic, and two-dimensional (2D) monocular visualization on robotics-assisted mitral valve annuloplasty versus conventional techniques in an ex vivo animal model. In addition, we sought to determine whether these effects were consistent between novices and experts in robotics-assisted cardiac surgery. Methods A cardiac surgery test-bed was constructed to measure forces applied during mitral valve annuloplasty. Sutures were passed through the porcine mitral valve annulus by the participants with different levels of experience in robotics-assisted surgery and tied in place using both robotics-assisted and conventional surgery techniques. Results The mean time for both the experts and the novices using 3D visualization was significantly less than that required using 2D vision (P < 0.001). However, there was no significant difference in the maximum force applied by the novices to the mitral valve during suturing (P = 0.7) and suture tying (P = 0.6) using either 2D or 3D visualization. The mean time required and forces applied by both the experts and the novices were significantly less using the conventional surgical technique than when using the robotic system with either 2D or 3D vision (P < 0.001). Conclusions Despite high-quality binocular images, both the experts and the novices applied significantly more force to the cardiac tissue during 3D robotics-assisted mitral valve annuloplasty than during conventional open mitral valve annuloplasty. This finding suggests that 3D visualization does not fully compensate for the absence of haptic feedback in robotics-assisted cardiac surgery.


2016 ◽  
Vol 88 (4) ◽  
pp. 467-479 ◽  
Author(s):  
Ka-yan Yim ◽  
Chi-wai Kan

Fabric hand is an indispensable characteristic for the selection of fabric and product development and the buying consideration for manufacturers and consumers. However, there is little comprehensive work on the hand feel property of warp-knitted fabrics due to the mainstream natural fibers (cotton, wool and silk) and other fabric structures (woven, weft-knitted and nonwoven). The increasing potential for the wide variety of applications and development of warp-knitted fabrics is not only because its fabric hand gives better determination for fabric marketing, but also because it provides extensive scope for fabric performance and appearance. This paper reports an experimental study on the integrated fabric hand behavior of a series of warp-knitted fabrics made for various apparel applications, such as sportswear, lingerie and leisure wear. These 105 fabrics were produced by varying different physical parameters, including fabric weight and fabric thickness. The Kawabata Evaluation System for Fabric (KES-F) was employed to obtain the fabric hand properties (primary hand value and total hand value) related with stiffness, smoothness and softness. All low-stress mechanical properties and fabric hand values from the testing results were used to verify the applicability of the KES-F on warp-knitted fabrics and to analyze the relationships of fabric parameters and hand characteristics. The results indicate that the KES-F is an appropriate tool to measure the hand attributes of warp-knitted samples, and moderate correlations between physical properties and mechanical behavior were found.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mechiel van Manen ◽  
Léon olde Scholtenhuis ◽  
Hans Voordijk

PurposeThis study aims to empirically validate five propositions about the benefits of three-dimensional (3D) visualizations for the management of subsurface utility projects. Specifically, the authors validate whether benefits from 3D in the literature of building construction project management also apply to subsurface utility projects and map them using a taxonomy of project complexity levels.Design/methodology/approachA multiple case study of three utility construction projects was carried out during which the first author was involved in the daily work practices at a utility contractor. 3D visualizations of existing project models were developed, and design and construction meetings were conducted. Practitioners' interactions with and reflections on these 3D visualizations were noted. Observational data from the three project types were matched with the five propositions to determine where benefits of 3D visualizations manifested themselves.FindingsPractitioners found that 3D visualizations had most merit in crowded urban environments when constructing rigid pipelines. All propositions were validated and evaluated as beneficial in subsurface utility projects of complexity level C3. It is shown that in urban projects with rigid pipelines (project with the highest complexity level), 3D visualization prevents misunderstanding or misinterpretations and increases efficiency of coordination. It is recommended to implement 3D visualization approaches in such complex projectsOriginality/valueThere is only limited evidence on the value 3D visualizations in managing utility projects. This study contributes rich empirical evidence on this value based on a six-month observation period at a subsurface contractor. Their merit was assessed by associating 3D approaches with project complexity levels, which may help utility contractors in strategically implementing 3D applications.


Sign in / Sign up

Export Citation Format

Share Document