Sustainable Construction Materials

2016 ◽  
pp. 1-37
Author(s):  
R. V. Ralegaonkar ◽  
M. V. Madurwar ◽  
V. V. Sakhare
Keyword(s):  
Smart City ◽  
Raw Materials ◽  
Construction Materials ◽  
Raw Material ◽  
Sustainable Construction ◽  
City Development ◽  
Chemical Test ◽  
Physico Chemical ◽  
Increasing Demand ◽  
By Products

Due to ever increasing demand for the conventional construction materials as well as an increase in agro-industrial by-products it is essential to reuse these materials. As a smart city solution this chapter briefs an overview for the application of alternate raw materials as a principal source for the development of sustainable construction materials. The potential application of the discussed raw materials is elaborated as cementitious material, the aggregates as well as alternative reinforcement material. To understand the process of application, sustainable masonry product development is discussed in detail. In order to evaluate the feasibility of the raw material, the necessary physico-chemical test evaluation methods are also briefed. The developed end product performance evaluation is also discussed by desired tests as recommended by standards. The chapter concludes with a positive note that reuse of agro-industrial by-products is a feasible solution for the smart city development.

Sustainable Construction Materials

2019 ◽  
pp. 658-687 ◽  
Author(s):  
R. V. Ralegaonkar ◽  
M. V. Madurwar ◽  
V. V. Sakhare
Keyword(s):  
Smart City ◽  
Raw Materials ◽  
Construction Materials ◽  
Raw Material ◽  
Sustainable Construction ◽  
City Development ◽  
Chemical Test ◽  
Physico Chemical ◽  
Increasing Demand ◽  
By Products

Due to ever increasing demand for the conventional construction materials as well as an increase in agro-industrial by-products it is essential to reuse these materials. As a smart city solution this chapter briefs an overview for the application of alternate raw materials as a principal source for the development of sustainable construction materials. The potential application of the discussed raw materials is elaborated as cementitious material, the aggregates as well as alternative reinforcement material. To understand the process of application, sustainable masonry product development is discussed in detail. In order to evaluate the feasibility of the raw material, the necessary physico-chemical test evaluation methods are also briefed. The developed end product performance evaluation is also discussed by desired tests as recommended by standards. The chapter concludes with a positive note that reuse of agro-industrial by-products is a feasible solution for the smart city development.

Green gold of Africa – Can growing native bamboo in Ethiopia become a commercially viable business?

2014 ◽  
Vol 90 (05) ◽  
pp. 628-635 ◽  
Author(s):  
Felix Böck
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Wood Products ◽  
Raw Material ◽  
Sustainable Construction ◽  
Sustainable Business ◽  
Subtropical Zone ◽  
New Construction ◽  
Increasing Demand

With concerns about climate change and the search for sustainable construction materials, significant attention is now being paid to Africa's natural resources. Ethiopia, known as Africa's political capital, has a rapidly expanding economy with increasing demand for new construction materials. Through public private partnerships projects the country is developing a sustainable business model to promote bamboo as a raw material. The subtropical zone of Ethiopia is home to approximately 65% of Africa's bamboo resources, an area of over 1 million hectares. Bamboo is potentially an ideal source of local, sustainable purpose-engineered building materials for growing cities not only in Ethiopia but across Africa. Production of conventional construction materials such as steel and concrete is expensive, highly energy intensive and unsustainable, requiring large quantities of water and is strongly dependent on imported raw materials. Bamboo is a renewable building material widely cultivated in Ethiopia but not yet utilized in modern construction. Structural Bamboo Products (SBP), similar to engineered wood products, have excellent potential to partially replace the use of more energy-intensive materials. Projects such as African Bamboo are taking steps in managing, cultivating and using Ethiopian bamboo species to help mitigate rapid deforestation in East Africa by creating alternative “wood” sources and sustainable business opportunities.

scholarly journals Iron and Aluminium Production Wastes as Exclusive Components of Alkali Activated Binders—Towards a Sustainable Alternative

2021 ◽  
Vol 13 (17) ◽  
pp. 9938
Author(s):  
Nuno Cristelo ◽  
Fernando Castro ◽  
Tiago Miranda ◽  
Zahra Abdollahnejad ◽  
Ana Fernández-Jiménez
Keyword(s):  
Co2 Emissions ◽  
Building Materials ◽  
Negative Impact ◽  
Raw Materials ◽  
Construction Materials ◽  
Heat Of Hydration ◽  
Sustainable Construction ◽  
Alkaline Solutions ◽  
By Products ◽  
Alkali Activated

The sustainability of resources is becoming a worldwide concern, including construction and building materials, especially with the alarming increase rate in global population. Alternative solutions to ordinary Portland cement (OPC) as a concrete binder are being studied, namely the so-called alkali-activated cements (AAC). These are less harmful to the environment, as lower CO2 emissions are associated with their fabrication, and their mechanical properties can be similar to those of the OPC. The aim of developing alkali-activated materials (AAM) is the maximization of the incorporated recycled materials, which minimises the CO2 emissions and cost, while also achieving acceptable properties for construction applications. Therefore, various efforts are being made to produce sustainable construction materials based on different sources and raw materials. Recently, significant attention has been raised from the by-products of the steelmaking industry, mostly due to their widespread availability. In this paper, ladle slag (LS) resulting from steelmaking operations was studied as the main precursor to produce AAC, combined with phosphating bath sludge—or phosphate sludge (PS)—and aluminium anodising sludge (AS), two by-products of the surface treatment of metals, in replacement rates of 10 and 20 wt.%. The precursors were activated by two different alkaline solutions: a combination of commercial sodium hydroxide and sodium silicate (COM), and a disposed solution from the cleaning of aluminium extrusion steel dies (CLE). This study assesses the influence of these by-products from the steelmaking industry (PS, AS and CLE) on the performance of the alkali-activated LS, and specifically on its fresh and hardened state properties, including rheology, heat of hydration, compressive strength and microstructure and mineralogy (X-ray diffraction, scanning electron microscopy coupled with energy dispersive spectroscopy and Fourier transform infra-red. The results showed that the CLE had no negative impact on the strength of the AAM incorporating PS or/and AS, while increasing the strength of the LS alone by 2×. Additionally, regardless of the precursor combination, the use of a commercial activator (COM) led to more fluid pastes, compared with the CLE.

scholarly journals Construction Waste as a Resource in a Sustainable Built Environment

2020 ◽  
Vol 2020 (08) ◽  
pp. 28-36
Author(s):  
Martina Zbašnik-Senegačnik ◽  
Ljudmila Koprivec
Keyword(s):  
Life Cycle ◽  
Built Environment ◽  
Building Materials ◽  
Waste Treatment ◽  
Raw Materials ◽  
Construction Materials ◽  
Raw Material ◽  
Sustainable Construction ◽  
Construction Waste ◽  
Key Factor

The built environment requires ever-increasing amounts of raw material resources and at the same time bears the responsibility for the resulting waste. Waste is generated throughout the life cycle. In the initial phases it is referred to as industrial waste, while during construction, reconstruction, and demolition it is called construction waste. Construction waste is most voluminous but it also has a great potential in circular economy that aims at the closed loop cycle where already used construction materials and components are recovered as raw materials. Sustainable building principles include four basic strategies, waste avoidance, construction materials and components re-use, continued use, and recycling. The possibility of construction waste treatment and its possible recovery in the building process depends on the type of prevailing materials that are contained in building elements as well as on detachability, separability and inseparability of structural joints and components. The architect plays a responsible role in decreasing the volume of construction waste as the conception of a building represents the key factor in sustainable construction waste management. Planning a construction with a good dismantling potential at the end of the building’s life cycle includes a number of factors such as the choice of building materials with a low environmental impact, the design of detachable composite materials and structures as well as the design of mono material structures. This article focuses on waste resulting from the built environment and discusses architectural concepts with a potential of reducing the volume of construction waste and its potential recovery as a construction resource.

scholarly journals Towards By-Product Utilisation of Pea Hulls: Isolation and Quantification of Galacturonic Acid

Foods ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 203 ◽  
Author(s):  
Friederike Gutöhrlein ◽  
Stephan Drusch ◽  
Sebastian Schalow
Keyword(s):  
Galacturonic Acid ◽  
Ethylenediaminetetraacetic Acid ◽  
Raw Materials ◽  
Enzymatic Digestion ◽  
Raw Material ◽  
Trifluoracetic Acid ◽  
Complete Digestion ◽  
Digestion Methods ◽  
Fibre Matrix ◽  
By Products

In order to evaluate by-products from food processing as alternative raw materials for pectin extraction, their amount of galacturonic acid (GalA) has to be analysed as a marker for pectin content. In the present study, significant differences in GalA release using different digestion methods are shown for pea hulls, as an example of by-products with a high content of cellulose. Complete digestion of the fibre matrix was assumed for Saeman hydrolysis as a reference protocol. Significantly lower GalA release was achieved by a treatment with trifluoracetic acid (TFA). An alternative treatment with ethylenediaminetetraacetic acid (EDTA) at pH 11 followed by an enzymatic digestion at pH 4.5 using a combination of polygalacturonase (Vegazyme M) and cellulase (Celluclast 1.5L) resulted in a similar release of GalA compared to Seaman hydolysis. Pea hull samples, analysed by this alternative protocol, showed on average a GalA content of 11.2%. Therefore, pea hulls may serve as new raw material for pectin extraction.

scholarly journals Extraction and Characterization of Gelatin from Skin By-Products of Seabream, Seabass and Rainbow Trout Reared in Aquaculture

2021 ◽  
Vol 22 (22) ◽  
pp. 12104
Author(s):  
Jesus Valcarcel ◽  
Carolina Hermida-Merino ◽  
Manuel M. Piñeiro ◽  
Daniel Hermida-Merino ◽  
José Antonio Vázquez
Keyword(s):  
Molecular Weight ◽  
Rainbow Trout ◽  
Raw Materials ◽  
Gel Strength ◽  
Current Trends ◽  
First Case ◽  
Imino Acids ◽  
Increasing Demand ◽  
A Minor ◽  
By Products

The expansion of fish filleting, driven by the increasing demand for convenience food, concomitantly generates a rising amount of skinning by-products. Current trends point to a growing share of aquaculture in fish production, so we have chosen three established aquaculture species to study the properties of gelatin extracted from their skin: rainbow trout, commonly filleted; and seabass and seabream, marketed whole until very recently. In the first case, trout skin yields only 1.6% gelatin accompanied by the lowest gel strength (96 g bloom), while yield for the other two species exceeds 6%, and gel strength reaches 181 and 229 g bloom for seabass and seabream, respectively. These results are in line with the proportion of total imino acids analyzed in the gelatin samples. Molecular weight profiling shows similarities among gelatins, but seabass and seabream gelatins appear more structured, with higher proportion of β-chains and high molecular weight aggregates, which may influence the rheological properties observed. These results present skin by-products of seabream, and to a minor extent seabass, as suitable raw materials to produce gelatin through valorization processes.

scholarly journals Physical and Chemical Fundamentals and Technical Solutions for Recovery of Non-ferrous and Rare Metals from Industrial Wastes

2020 ◽  
Author(s):  
P.A. Kozlov ◽  
A.M. Panshin ◽  
L.I. Leontiev
Keyword(s):  
Russian Federation ◽  
Raw Materials ◽  
Block Diagram ◽  
Industrial Wastes ◽  
Raw Material ◽  
Material Base ◽  
Waelz Process ◽  
Zinc Cadmium ◽  
The Russian Federation ◽  
Increasing Demand

The increasing demand for zinc and a range of zinc-related metals (for example: lead; indium; tin; cadmium; and copper) in the Russian Federation cannot be satisfied by the existing production plants due to the lack of raw materials. At the same time, ferrous and non-ferrous metallurgy and the chemical industry have accumulated hundreds of millions of tons of zinc wastes (falling into the hazard categories 2 to 4), the processing of which could not only make up the raw material base, but also improve the environmental situation. In the world, over 85% of ferrous dust is recycled using the Waelz process. The Waeltz process is used for distilling separation of elements under reducing conditions. In this study, a block diagram for production of the following elements from industrial wastes is proposed: zinc, cadmium and indium in form of massive metals; zinc and indium in the form of fine powders; and clinker as a raw material for cement production. The technical and scientific details of this new process have been patented in the Russian Federation and abroad. For the first time, the following operations have been implemented with the use of large-sized Waelz kilns: vapour-oxidized Waeltz treatment of polymetallic wastes; recycling of heat from gases and solid products with generation of process fumes; and implementation of alternative flux (dolomite) and alternative fuel (petroleum coke). Keywords: Waelz process, industrial wastes, heat recycling, vapour-oxidized Waelz processing

Generalized Bogue calculations for determining phase compatibility/equilibria: Assessing potential use of inorganic industrial by-products

1989 ◽  
Vol 4 (2) ◽  
pp. 447-451 ◽  
Author(s):  
J. Majling ◽  
V. Jesenák ◽  
Della M. Roy ◽  
Rustum Roy
Keyword(s):  
Phase Composition ◽  
Raw Materials ◽  
Equilibrium Phase ◽  
Material Balance ◽  
Industrial Wastes ◽  
Raw Material ◽  
Equilibrium Phase Composition ◽  
Phase Compatibility ◽  
By Products ◽  
Potential Use

A method has been developed for determining the equilibrium phase composition of multicomponent systems at subsolidus conditions and atmospheric pressure, based on the knowledge of binary phase compatibilities and on information concerning the existence and stoichiometry of ternary and higher order compounds. The method, combined with material balance, enables computation of the changes of equilibrium phase compositions of fired products dependent on the proportions of multicomponent raw materials; the procedure is useful for assessing the exploitability of industrial wastes for production of binding materials and ceramics. It is also possible to find the raw material mixture composition needed for the desired phase composition of the fired product.

Microbiological and Sensory Suitability of a Novel Raw Material from Porcine Blood and Collagenous Rind Protein as an Ingredient in a Fermented Raw Salami-Type Sausage

2009 ◽  
Vol 72 (4) ◽  
pp. 826-836 ◽  
Author(s):  
BERNHARD NOWAK ◽  
THEDA von MUEFFLING
Keyword(s):  
Raw Materials ◽  
Meat Product ◽  
Raw Material ◽  
High Quality ◽  
B Values ◽  
Porcine Blood ◽  
Quality Product ◽  
Plate Counts ◽  
By Products ◽  
High Quality Product

The aim of this investigation was to develop a treatment for combined porcine blood corpuscle concentrate (BCC) and porcine collagenous connective tissue (rind) so as to make more use of these slaughter by-products as an ingredient in a high-quality product such as salami-type sausage. For this study, BCC was preserved, standardized (sBCC) (15% NaCl and 25% protein content), and then added (proportion of sBCC to rind, 15:85) to rind subjected to different treatments designated A, B, and C (A, 2 h at 90°C; B, 5 min at 90°C; and C, 2 h at 3°C). One half of each mixture was again heated (designated A1, B1, and C1; F70, ∼15), and the other half was only cooled (designated A2, B2, and C2). The now colored, highly proteinaceous rind mixtures (A1 to C2) were then cooled and granulated (designated GBR-A1 to GBR-C2). Three of the granulates (GBRA1, -B1, and -B2) proved to be promising new raw materials: their aerobic plate counts were <log 4.0 CFU/g, and their color was appealing (L* values, 23.9 to 25.9; a* values, 17.7 to 22.2; b* values, 11.5 to 12.7). These granulates were then substituted for part (5%) of the meat in the production of fermented raw salami-type sausages. Two of the sausages (SA1 and SB1) were microbiologically stable (containing mainly lactobacilli) and had positive sensory, chemical, and physical properties (e.g., protein, 21%; water activity, 0.90; pH, between 5.3 and 5.4 on day 36) meeting all standards for commercially produced raw sausages. Our investigation yielded a practicable way to treat and combine two slaughter by-products for use in a high-quality meat product.

scholarly journals “Smart Is Not Smart Enough!” Anticipating Critical Raw Material Use in Smart City Concepts: The Example of Smart Grids

2019 ◽  
Vol 11 (16) ◽  
pp. 4422 ◽  
Author(s):  
Martin David ◽  
Florian Koch
Keyword(s):  
Urban Planning ◽  
Smart City ◽  
Urban Areas ◽  
Smart Grids ◽  
Ethical Issues ◽  
Raw Materials ◽  
Smart Cities ◽  
Raw Material ◽  
Anthropogenic Sources ◽  
Smart Meters

Globally emerging smart city concepts aim to make resource production and allocation in urban areas more efficient, and thus more sustainable through new sociotechnical innovations such as smart grids, smart meters, or solar panels. While recent critiques of smart cities have focused on data security, surveillance, or the influence of corporations on urban development, especially with regard to intelligent communication technologies (ICT), issues related to the material basis of smart city technologies and the interlinked resource problems have largely been ignored in the scholarly literature and in urban planning. Such problems pertain to the provision and recovery of critical raw materials (CRM) from anthropogenic sources like scrap metal repositories, which have been intensely studied during the last few years. To address this gap in the urban planning literature, we link urban planning literatures on smart cities with literatures on CRM mining and recovery from scrap metals. We find that underestimating problems related to resource provision and recovery might lead to management and governance challenges in emerging smart cities, which also entail ethical issues. To illustrate these problems, we refer to the smart city energy domain and explore the smart city-CRM-energy nexus from the perspectives of the respective literatures. We show that CRMs are an important foundation for smart city energy applications such as energy production, energy distribution, and energy allocation. Given current trends in smart city emergence, smart city concepts may potentially foster primary extraction of CRMs, which is linked to considerable environmental and health issues. While the problems associated with primary mining have been well-explored in the literature, we also seek to shed light on the potential substitution and recovery of CRMs from anthropogenic raw material deposits as represented by installed digital smart city infrastructures. Our central finding is that the current smart city literature and contemporary urban planning do not address these issues. This leads to the paradox that smart city concepts are supporting the CRM dependencies that they should actually be seeking to overcome. Discussion on this emerging issue between academics and practitioners has nevertheless not taken place. We address these issues and make recommendations.

Sign in / Sign up

Export Citation Format

Share Document