Effect of Carbon Fibre Ratio to the Impact Properties of Hybrid Kenaf/Carbon Fibre Reinforced Epoxy Composites

2013 ◽  
Vol 393 ◽  
pp. 136-139 ◽  
Author(s):  
Mimi Azlina Abu Bakar ◽  
Sahrim Ahmad ◽  
Wahyu Kuntjoro ◽  
Salmiah Kasolang
Keyword(s):  
Carbon Fibre ◽  
Hybrid Composites ◽  
Epoxy Composites ◽  
Resin Matrix ◽  
Fibre Reinforcement ◽  
Carbon Fibres ◽  
Electron Microscopic ◽  
Impact Properties ◽  
The Matrix ◽  
The Impact

Effects of the incorporation of untreated and treated hybrid kenaf/carbon fibre reinforced epoxy composites on the impact properties were studied. Hybrid kenaf/carbon fibres and thermoset matrices were hand-laid up and characterized in terms of its mechanical properties. The kenaf fibres were alkali treated whilst the carbon fibres were gamma radiation treated before use as reinforcement in the epoxy resin matrix. The reinforcing effects of kenaf hybridized with carbon fibre in epoxy composites were evaluated at various fibre loadings with overall fibre contents 20 wt%. Hybrid composites with different ratios of kenaf fibre : carbon fibre ; 0.9:0.1, 0.8:0.2, 0.7:0.3 and 0.6:0.4 were prepared. Impact tests of untreated and treated hybrid kenaf/carbon fibres were performed. The fractured surfaces of these composites were investigated by using scanning electron microscopic technique (SEM) to determine the interfacial bonding between the matrix and the fibre reinforcement. It was found that the treated hybrid composites increased the impact strength by 26% compared to the untreated ones.

Impact resistance of short carbon fibre-carbon nanotube-polymer matrix hybrid composites: A stochastic multiscale approach

2021 ◽  
pp. 146442072110152
Author(s):  
Reza Ansari ◽  
Masoud Ahmadi ◽  
Saeed Rouhi
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotube ◽  
Carbon Fibre ◽  
Impact Resistance ◽  
Multiscale Approach ◽  
Carbon Fibres ◽  
Impact Properties ◽  
Reinforced Polymer ◽  
Macro Scale ◽  
The Impact

A multiscale approach is used here to investigate the impact properties of carbon fibre/carbon nanotube-reinforced polymer. For this purpose, the mechanical properties of the carbon nanotubes (CNTs) are obtained by molecular dynamics simulations. Then, they are included in the polyethene matrix, and the mechanical properties of CNT-reinforced polyethene are computed using a stochastic approach. Considering the CNT-reinforced polyethene as the matrix, the effect of adding the carbon fibres on its mechanical properties is investigated in the next step. Finally, utilizing a stochastic method, the macro-scale mechanical properties of carbon fibre/carbon nanotube-reinforced polymer are computed. Thereafter, the impact test is applied on the models. The finite element method is used to investigate the mechanical and impact properties of representative volume elements. The effects of waviness, volume percentage and aspect ratio of the carbon fibre and CNT on the mechanical properties of the multiscale composite are evaluated. It is shown that reinforcing the polyethene matrix by carbon fibres and CNTs significantly increases its impact resistance. Adding 3% and 5% volume percentages of CNT into 3%-carbon fibre/polyethene and 5%-carbon fibre/polyethene respectively, resulted in 26% and 47% improvement in the impact resistance of the composite.

The Impact Properties of a Polyurethane Composite Filled with Clay

2011 ◽  
Vol 197-198 ◽  
pp. 1100-1103
Author(s):  
Jian Li
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Mechanical Analysis ◽  
Impact Testing ◽  
Impact Properties ◽  
Polyurethane Composite ◽  
The Matrix ◽  
The Impact ◽  
Scanning Electron

A polyurethane/clay (PU/clay) composite was synthesized. The microstructure of the composite was examined by scanning electron microscopy. The impact properties of the composite were characterized by impact testing. The study on the structure of the composite showed that clays could be dispersed in the polymer matrix well apart from a few of clusters. The results from mechanical analysis indicated that the impact properties of the composite were increased greatly in comparison with pure polyurethane. The investigation on the mechanical properties showed that the impact strength could be obviously increased by adding 20 wt% (by weight) clay to the matrix.

Experimental Investigation on Volume Fraction of Mechanical and Physical Properties of Flax and Bamboo Fibers Reinforced Hybrid Epoxy Composites

2017 ◽  
Vol 25 (3) ◽  
pp. 229-236 ◽  
Author(s):  
S. Sathish ◽  
K. Kumaresan ◽  
L. Prabhu ◽  
N. Vigneshkumar
Keyword(s):  
Physical Properties ◽  
Epoxy Resin ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Sem Analysis ◽  
Epoxy Composites ◽  
Resin Matrix ◽  
Void Content ◽  
Mechanical And Physical Properties ◽  
Bamboo Fibers

The aim of this paper is to study the effect of volume fraction on mechanical and physical properties such as tensile, flexural, impact, interlaminar shear strength, void content and water absorption of flax and bamboo fibers reinforced hybrid epoxy composites. Flax and bamboo fibers reinforced epoxy resin matrix hybrid composites have been fabricated by compression molding techniques. The hybrid composites were fabricated with different volume fraction of fibers. SEM analysis on the hybrid composite materials was performed to analyze the bonding behavior of materials and internal structure of the fractured surfaces. The effect of chemical treatment of flax and bamboo fibers was verified by FTIR analysis. The results showed that the tensile, impact, flexural and ILSS are maximum for 40:0 (flax: bamboo) hybrid composites. The void content decreased for 20:20 (flax:bamboo) composites due to tightly packed flax fiber and more compatibility towards epoxy resin.

Experimental assessment of adding carbon nanotubes on the impact properties of Kevlar-ultrahigh molecular weight polyethylene fibers hybrid composites

2020 ◽  
pp. 152808372092148 ◽  
Author(s):  
Mansour B Bigdilou ◽  
Reza Eslami-Farsani ◽  
Hossein Ebrahimnezhad-Khaljiri ◽  
Mohammad A Mohammadi
Keyword(s):  
Carbon Nanotubes ◽  
Molecular Weight ◽  
Energy Absorption ◽  
Hybrid Composites ◽  
Ultrahigh Molecular Weight Polyethylene ◽  
Absorbed Energy ◽  
Impact Properties ◽  
Damage Area ◽  
Ultrahigh Molecular Weight ◽  
The Impact

In the present study, the effect of adding various percentage (0.1, 0.3, 0.5, and 0.9 wt.%) of carbon nanotubes on the impact properties of hybrid composites reinforced with the different stacking sequence of Kevlar fibers and ultrahigh molecular weight polyethylene was investigated. The obtained results showed that the composite with the configuration of sandwiched ultrahigh molecular weight polyethylene layers by Kevlar layers had the higher impact properties as compared with other hybrid configurations. Adding 0.1 wt.% carbon nanotubes in this configuration was caused to increase the normalized absorbed energy more than 6.5 times. The fracture surface of this configuration showed that the branching and expanding the damage area were the dominant mechanisms for the energy absorption of impactor. Also, the field emission scanning electron microscope illustrated that the carbon nanotubes by bridging, pulling out, and fracturing mechanisms increased the capability of energy absorption in the hybrid composites.

scholarly journals Effect of fiber content and their hybridization on bending and torsional strength of hybrid epoxy composites reinforced with carbon and sugar palm fibers

Polimery ◽  
2021 ◽  
Vol 66 (1) ◽  
pp. 36-43 ◽  
Author(s):  
N. M. Z. Nik Baihaqi ◽  
A. Khalina ◽  
N. Mohd Nurazzi ◽  
H. A. Aisyah ◽  
S. M. Sapuan ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Torsion Test ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
The Matrix ◽  
Carbon Fiber Reinforced Composites ◽  
Carbon Fiber Reinforced

This study aims to investigate the effect of fiber hybridization of sugar palm yarn fiber with carbon fiber reinforced epoxy composites. In this work, sugar palm yarn composites were reinforced with epoxy at varying fiber loads of 5, 10, 15, and 20 wt % using the hand lay-up process. The hybrid composites were fabricated from two types of fabric: sugar palm yarn of 250 tex and carbon fiber as the reinforcements, and epoxy resin as the matrix. The ratios of 85 : 15 and 80 : 20 were selected for the ratio between the matrix and reinforcement in the hybrid composite. The ratios of 50 : 50 and 60 : 40 were selected for the ratio between sugar palm yarn and carbon fiber. The mechanical properties of the composites were characterized according to the flexural test (ASTM D790) and torsion test (ASTM D5279). It was found that the increasing flexural and torsion properties of the non-hybrid composite at fiber loading of 15 wt % were 7.40% and 75.61%, respectively, compared to other fiber loading composites. For hybrid composites, the experimental results reveal that the highest flexural and torsion properties were achieved at the ratio of 85/15 reinforcement and 60/40 for the fiber ratio of hybrid sugar palm yarn/carbon fiber-reinforced composites. The results from this study suggest that the hybrid composite has a better performance regarding both flexural and torsion properties. The different ratio between matrix and reinforcement has a significant effect on the performance of sugar palm composites. It can be concluded that this type of composite can be utilized for beam, construction applications, and automotive components that demand high flexural strength and high torsional forces.

scholarly journals The impact of fibre processing on the mechanical properties of epoxy matrix composites and wood-based particleboard reinforced with hemp (Cannabis sativa L.) fibre

2022 ◽  
Author(s):  
Albert Hernandez-Estrada ◽  
Jörg Müssig ◽  
Mark Hughes
Keyword(s):  
Mechanical Properties ◽  
Fracture Zone ◽  
Structural Integrity ◽  
Bending Strength ◽  
Cannabis Sativa ◽  
Mechanical Performance ◽  
Epoxy Composites ◽  
Fibre Reinforcement ◽  
Fibre Bundles ◽  
The Impact

AbstractThis work investigated the impact that the processing of hemp (C. sativa L.) fibre has on the mechanical properties of unidirectional fibre-reinforced epoxy resin composites loaded in axial tension, and particleboard reinforced with aligned fibre bundles applied to one surface of the panel. For this purpose, mechanically processed (decorticated) and un-processed hemp fibre bundles, obtained from retted and un-retted hemp stems, were utilised. The results clearly show the impact of fibre reinforcement in both materials. Epoxy composites reinforced with processed hemp exhibited 3.3 times greater tensile strength when compared to the un-reinforced polymer, while for the particleboards, the bending strength obtained in those reinforced with processed hemp was 1.7 times greater than the un-reinforced particleboards. Moreover, whether the fibre bundles were processed or un-processed also affected the mechanical performance, especially in the epoxy composites. For example, the un-processed fibre-reinforced epoxy composites exhibited 49% greater work of fracture than the composites reinforced with processed hemp. In the wood-based particleboards, however, the difference was not significant. Additionally, observations of the fracture zone of the specimens showed different failure characteristics depending on whether the composites were reinforced with processed or un-processed hemp. Both epoxy composites and wood-based particleboards reinforced with un-processed hemp exhibited fibre reinforcement apparently able to retain structural integrity after the composite’s failure. On the other hand, when processed hemp was used as reinforcement, fibre bundles showed a clear cut across the specimen, with the fibre-reinforcement mainly failing at the composite's fracture zone.

Sign in / Sign up

Export Citation Format

Share Document