Determination Method of the Supporting Intensity of Fully-Mechanized Face in Deeply Inclined Medium-Thickness Seam

2014 ◽  
Vol 522-524 ◽  
pp. 1386-1389
Author(s):  
Zhong Ping Guo ◽  
Hui Qiang Duan ◽  
Fan Feng ◽  
Gui Yin Zhang
Keyword(s):  
Coal Seam ◽  
Theoretical Basis ◽  
Surrounding Rock ◽  
Medium Thickness ◽  
Working Face ◽  
Displacement Thickness ◽  
Face Length ◽  
Working Resistance ◽  
Theory Calculation ◽  
The Relationship

According to the occurrence conditions of deeply inclined coal seam of 81206 working face in Yanya coal mine, methods including transmission rock theory calculation and numerical calculation based on the relationship between supports and surrounding rock are used to calculate and analyze. The proper working resistance of support is 5979.2kN and the supporting intensity is 0.8~0.95MPa. The regression equation associated with roof subsidence displacement , thickness of the coal seam, working face length and supporting intensity is accomplished, which provides theoretical basis for the support selection.

Study on the Relationship between Hydraulic Support on the Working Face with Large Mining Height and Surrounding Rock

2011 ◽  
Vol 328-330 ◽  
pp. 1671-1674
Author(s):  
Ying Ma ◽  
Sheng Zhong
Keyword(s):  
Coal Seam ◽  
Surrounding Rock ◽  
Hydraulic Support ◽  
Working Face ◽  
Safety Work ◽  
Immediate Roof ◽  
The Face ◽  
Large Mining Height ◽  
The Relationship ◽  
Mining Height

Using unified model and theory of rock pressure, the problems, such as caving of stope roof with large mining height and destruction of support, strata movement and surface subsidence, are unified analyzed and researched. The results show that: pressure shell is dynamic shell, which moves forward with the propulsion of working face; with the increase of mining height on the face, the height of fracture zone in coal seam increases, not continuously, but jumpily; with the increase of mining height, support load rises, but the degree of this rise decreases gradually, increased degree of immediate roof weight should be greater than that of given deformation pressure. The results provide necessary basis for reliability of hydraulic support on the working face with large mining height and safety work in the underground.

scholarly journals Migration Law of the Roof of a Composited Backfilling Longwall Face in a Steeply Dipping Coal Seam

Minerals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 188 ◽  
Author(s):  
Wenyu Lv ◽  
Yongping Wu ◽  
Liu Ming ◽  
Jianhui Yin
Keyword(s):  
Coal Seam ◽  
Inclination Angle ◽  
Mechanical Model ◽  
Surrounding Rock ◽  
Longwall Face ◽  
Mining Operations ◽  
Mining Depth ◽  
Working Face ◽  
Face Length ◽  
Migration Law

The artificial-caved rock composited backfilling approach can effectively restrain the dynamic phenomena in the coal seam and the associated roof and floor during mining operations, and can also improve the stability of the system of support and surrounding rock. In this study, based on the analysis of influencing factors affecting the surrounding rock movement and deformation of the composited backfilling longwall face in a steeply dipping coal seam, the roof mechanical model is developed, and the deflection differential equation is derived, to obtain the roof damage structure and the location of the roof fracture for the area without backfilling. The migration law of the roof under different inclination angles, mining depths, working face lengths, and backfilling ratios are analyzed. Finally, mine pressure is detected in the tested working face. Results show that the roof deflection, bending moment, and rotation drop with the increase of the inclination angle and backfilling ratio, whereas these parameters increase with greater mining depth and working face length. The roof failure location moves toward the upper area of the working face as the inclination angle and working face length increases, while it moves toward the center of the non-backfilling area with greater mining depth and backfilling ratio. Results from the proposed mechanical model agree well with the field test results, demonstrating the validity of the model, which can provide theoretical basis for a safe and efficient mining operation in steeply dipping coal seams.

Numerical Analysis of Influencing Factors of Stability in Thick Coal Seam Mining Roadway

2012 ◽  
Vol 256-259 ◽  
pp. 1453-1457
Author(s):  
Zhi Hua Li ◽  
Xin Zhu Hua ◽  
Ke Yang ◽  
Ruo Jun Zhu ◽  
De Sheng Zhou
Keyword(s):  
Coal Seam ◽  
Abutment Pressure ◽  
Surrounding Rock ◽  
Rock Body ◽  
Thick Coal Seam ◽  
Mining Depth ◽  
Working Face ◽  
Face Length ◽  
Seam Mining ◽  
Mining Height

The FLAC-3D software was used to study the surrounding rock displacement and the side abutment pressure distribution laws about roadway in thick coal seam. Based on this model, through change the mining height, working face length and mining depth, the differences of roadway underground pressure characteristics were analyzed between thick coal seam working face and normal working face. The results indicate that: ①the displacement of roadway surrounding rock increases with the increase of mining depth and mining height, the closer to the coal wall the larger of the increase range of roadway displacement. ②the peak of side abutment pressure increases with the increase of mining depth and mining height, the peak district of the stress will move toward the inner department of rock body. ③ the effect of working face length on the roadway displacement and the side abutment pressure is very feeble.

scholarly journals Effect of Face Length in Initial Mining Stage of Fully Mechanized Top-coal Caving Face With Large Mining Height

2021 ◽  
Author(s):  
Jianhang Wang ◽  
Yao Lu ◽  
CHANGXIANG WANG ◽  
Guangwei Xu ◽  
Chengran Zhang
Keyword(s):  
Mine Pressure ◽  
Pressure Behavior ◽  
Working Face ◽  
Face Length ◽  
The Face ◽  
Large Mining Height ◽  
Strata Behavior ◽  
Working Resistance ◽  
The Relationship ◽  
Surface Length

Abstract Based on the field measurement of the end resistance of the support during the initial weighting of the basic roof and the macroscopic mine pressure behavior during the weighting period of 101,22211,103 and 301 fully mechanized caving face in Changchun Xing Coal Mine, the mine pressure law of the working face is summarized and compared, and the relationship between the working face length and the working resistance of the support ( the weighting strength ) and the macroscopic mine pressure behavior is obtained. In the range of face length 126-230 m, with the increase of face length, the end-of-cycle resistance of the support gradually increases and the dynamic load coefficient of the support gradually increases when the coefficient of the support gradually increases, and the strata behavior of the working face changes from strong to very strong. When the face length is short ( 126-140.5m ), the hanging top area is too large to cause hurricanes when the working face is pressed, which threatens and damages the personal safety and equipment of the working face staff. Based on the above research, the problem of optimizing the surface length is proposed, and the surface length is determined to be within the range of 140-230 m according to the measured results.

scholarly journals Comprehensive technical support for safe mining in ultra-close coal seams: A case study

2021 ◽  
pp. 014459872110093
Author(s):  
Wei Zhang ◽  
Jiawei Guo ◽  
Kaidi Xie ◽  
Jinming Wang ◽  
Liang Chen ◽  
...  
Keyword(s):  
Coal Seam ◽  
Technical Support ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Deformation Control ◽  
Hard Roof ◽  
Working Face ◽  
Close Coal Seams ◽  
Safe Mining

In order to mine the coal seam under super-thick hard roof, improve the utilization rate of resources and prolong the remaining service life of the mine, a case study of the Gaozhuang Coal Mine in the Zaozhuang Mining Area has been performed in this paper. Based on the specific mining geological conditions of ultra-close coal seams (#3up and #3low coal seams), their joint systematic analysis has been performed, with the focus made in the following three aspects: (i) prevention of rock burst under super-thick hard roof, (ii) deformation control of surrounding rock of roadways in the lower coal seam, and (iii) fire prevention in the goaf of working face. Given the strong bursting tendency observed in upper coal seam and lower coal seam, the technology of preventing rock burst under super-thick hard roof was proposed, which involved setting of narrow section coal pillars to protect roadways and interleaving layout of working faces. The specific supporting scheme of surrounding rock of roadways in the #3low1101 working face was determined, and the grouting reinforcement method of local fractured zones through Marithan was further proposed, to ensure the deformation control of surrounding rock of roadways in lower coal seams. The proposed fire prevention technology envisaged goaf grouting and spraying to plug leaks, which reduced the hazard of spontaneous combustion of residual coals in mined ultra-close coal seams. The technical and economic improvements with a direct economic benefit of 5.55 million yuan were achieved by the application of the proposed comprehensive technical support. The research results obtained provide a theoretical guidance and technical support of safe mining strategies of close coal seams in other mining areas.

The Adaptation Analysis of the Fully Mechanized Coal Mining Face of Huopu Mine’s Third Soft Coal Seam

2014 ◽  
Vol 1049-1050 ◽  
pp. 335-338 ◽  
Author(s):  
Fa Quan Liu ◽  
Xue Wen Geng ◽  
Yong Che ◽  
Xiang Cui
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Geological Condition ◽  
Soft Coal ◽  
Working Face ◽  
Mining Face ◽  
Soft Coal Seam ◽  
Working Resistance

To get the maximum coal in front of the working face of the 17# coal seam, we installed a longer beam which is 1.2m in length in the leading end of the original working face supports ZF3000/17/28, and know that working face supports’ setting load and working resistance are lower .We changed the original supports with shield supports ZY3800/15/33 that are adaptable in the geological condition and got the favorable affection.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

Study on the Terminal Line Reasonable Position of Two Coal Seam under the Down-Protective Layer Pressure-Relieved Mining

2013 ◽  
Vol 295-298 ◽  
pp. 2913-2917
Author(s):  
Xiang Yang Zhang ◽  
Min Tu
Keyword(s):  
Coal Seam ◽  
Coal Pillar ◽  
Protective Layer ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Rock Properties ◽  
Engineering Practice ◽  
Working Face ◽  
Roadway Deformation ◽  
The Impact

In order to study the stress distribution and its dynamic influence law while the protective layer mining, based on the transfer law of mining-induced stress in the coal seam floor and in front of the working face, using numerical simulation software to simulate the surrounding rock stress under the different pillar width mining conditions, and carried through the roadway deformation engineering practice observations. It is shown that reserved 110m coal pillar could weaken the impact on the front of the floor tunnel under the protective layer mining process. When the top liberated layer mining to reduce the impact of mining stress superposition, it should avoid the terminal lines on the two coal seams at the same location and may be staggered at least about 30m ~ 50m. And it obtained that the roadway deformation not only by mining impact, but also considering the geological environment surrounding rock conditions, tunnel position in which layers of rock, rock properties and other factors. The research guided the engineering practice successfully.

scholarly journals Determination of cyclic filling length in gob-side entry retained with roadside filling and its application

2020 ◽  
Author(s):  
Zizheng Zhang ◽  
Jianbiao Bai ◽  
Xianyang Yu ◽  
Weijian Yu ◽  
Min Deng ◽  
...  
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Difference Method ◽  
Suggested Method ◽  
Stress Difference ◽  
Thick Coal Seam ◽  
Mechanics Model ◽  
Working Face ◽  
Geological Conditions ◽  
The Relationship

Abstract Gob-side entry retained with roadside filling (GER-RF) plays a key role in achieving coal mining without pillar and improving the coal resource recovery rate. Since there are few reports on the cyclic filling length of GER-RF, a method based on the stress difference method is proposed to determine the cyclic filling length of GER-RF. Firstly, a stability analysis mechanics model of the immediate roof above roadside filling area in GER was established, then the relationship between the roof stress distribution and the unsupported roof length was obtained by the stress difference method. According to the roof stability above roadside filling area based on the relationship between the roof stress and its tensile strength, the maximum unsupported roof length and rational cyclic filling length of GER-RF. Combined with the geological conditions of the 1103 thin coal seam working face of Heilong Coal Mine and the geological conditions of the 1301 thick coal seam working face of Licun Coal Mine, this suggested method was applied to determine that the rational cyclic filling lengths of GER-RF were 2.4 m and 3.2 m, respectively. Field trial tests show that the suggested method can effectively control the surrounding rock deformation along with rational road-in support and roadside support, and improve the filling and construction speed.

scholarly journals Study of Gob-Side Entry Retaining Technology with Roof Cutting under Upper Roadway Condition

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Xingen Ma ◽  
Manchao He ◽  
Xuewei Sun ◽  
Jianfeng Li ◽  
Gang He ◽  
...  
Keyword(s):  
Coal Seam ◽  
Surrounding Rock ◽  
Pressure Relief ◽  
Application System ◽  
Thick Coal Seam ◽  
Working Face ◽  
Geological Conditions ◽  
Key Technologies ◽  
Releasing Effect ◽  
System Designs

Gob-side entry retaining technology with roof cutting (GERRC) has been widely used in flat and near-flat coal seam conditions, but its application under inclined coal seam is still very deficient. In order to further improve the application system of GERRC and overcome the application difficulties under special geological conditions, this paper takes the 43073 working face of Yixin coal mine as an example to research the GERRC with upper roadway under gently inclined thick coal seam. Firstly, the difficulties in the upper entry retaining with inclined coal seam are analyzed and the corresponding key technologies and system designs are put forward. Subsequently, the roof cutting and upper entry retaining are designed in detail according to geological conditions of test working face, and the roof cutting and pressure releasing effect is analyzed by numerical simulation to expound the stress distribution and pressure releasing mechanism of surrounding rock. Finally, the upper entry retaining field test is carried out to verify the feasibility and applicability of the technology and related designs. Through field monitoring, it is found that the weighting step increases significantly, the weighting strength decreases effectively on the roof cutting side, and the pressure relief effect is obvious. Meanwhile, the maximum roof to floor convergence is 361 mm and the maximum shrinkage of both sides is 280 mm, so the retained entry can meet the reuse requirement of adjacent working face.

Sign in / Sign up

Export Citation Format

Share Document