Aerodynamic Analysis and Design Numerical Simulation of the Vortex Flow over a Common Research Model with Flying-Wing Configuration

2014 ◽  
Vol 540 ◽  
pp. 138-142 ◽  
Author(s):  
Yong Hong Li ◽  
Yong Huang ◽  
Ji Chuan Su
Keyword(s):  
Stokes Equations ◽  
Flow Characteristics ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Aerodynamic Characteristics ◽  
Rapid Expansion ◽  
Navier Stokes ◽  
Research Model ◽  
Analysis And Design ◽  
Dominant Feature

Previous wind tunnel study has found that the lift slope of a common research model with flying-wing configuration in a transonic freestream can experience a sudden drop as the angle of attack is increased. A numerical investigation of aerodynamic characteristics of the flying-wing configuration in transonic speed flow is presented with the intend to examine the changes of the flow characteristics in detail. As can been seen from the analysis, at sufficiently high angles of attack the dominant feature of flows over the leeside of the configuration is a pair of counter-rotating vortices. Solving the steady Reynolds-Averaged Navier-Stokes equations , the flow structures were exhibited in different angles and the analysis of total pressure, static pressure and axial velocity through wing vortex cores were presented in order to analyze the flow characteristics for the develop of the vortex. The investigation shows that the numerical method is accurate enough to capture the features of the flow especially the formation and breakdown of the leading-edge vortices. The rapid expansion of the vortex core and adverse pressure gradient the flow encounters in the chordwise direction affect the aerodynamic performance severely.

scholarly journals Effect of Leading-Edge Bulges on Aerodynamic Characteristics of Bionic Wingsail

2021 ◽  
Author(s):  
Chen Li ◽  
Peiting Sun ◽  
Hongming Wang
Keyword(s):  
Stokes Equations ◽  
Lift Coefficient ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Suction Surface ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Extension Direction ◽  
Lift And Drag

The leading-edge bulges along the extension direction are designed on the marine wingsail. The height and the spanwise wavelength of the protuberances are 0.1c and 0.25c, respectively. At Reynolds number Re=5×105, the Reynolds Averaged Navier-Stokes equations are applied to the simulation of the wingsail with the bulges thanks to ANSYS Fluent finite-volume solver based on the SST K-ω models. The grid independence analysis is carried out with the lift and drag coefficients of the wingsail at AOA = 8° and AOA=20°. The results show that while the efficiency of the wingsail is reduced by devising the leading-edge bulges before stall, the bulges help to improve the lift coefficient of the wingsail when stalling. At AOA=22° under the action of the leading-edge tubercles, a convective vortex is formed on the suction surface of the modified wingsail, which reduces the flow loss. So the bulges of the wingsail can delay the stall.

Calculation of Transition in Adverse Pressure Gradient Flow by Conditioned Equations

1996 ◽  
Author(s):  
J. Steelant ◽  
E. Dick
Keyword(s):  
Pressure Gradient ◽  
Transport Equation ◽  
Stokes Equations ◽  
Growth Parameter ◽  
Gradient Flow ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Transitional Flow ◽  
Navier Stokes ◽  
Navier Stokes Equations

Conditionally averaged Navier-Stokes equations are used to describe transitional flow in adverse pressure gradient combined with a transport equation for the intermittency factor γ. A transport equation developped in earlier work has been modified to eliminate the use of a distance along a streamline. An extension of the correlations is proposed to determine the spot growth parameter in adverse pressure gradient. This approach is verified against flows over a flat plate with an elliptical leading edge.

scholarly journals Wing Section Optimization for Supersonic Viscous Flow

1998 ◽  
Vol 120 (1) ◽  
pp. 102-108 ◽  
Author(s):  
Cem C. Item ◽  
Oktay Baysal
Keyword(s):  
Optimization Problem ◽  
Stokes Equations ◽  
Design Method ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Navier Stokes ◽  
Test Cases ◽  
Aerodynamic Optimization ◽  
Wing Section ◽  
Problem Formulations

To improve the performance of a highly swept supersonic wing, it is desirable to have an automated design method that also includes a higher fidelity to the flow physics. With this impetus, an aerodynamic optimization methodology incorporating the thin-layer Navier-Stokes equations and sensitivity analysis had previously been developed. Prior to embarking upon the full wing design task, the present investigation concentrated on the identification of effective optimization problem formulations and testing the feasibility of the employed methodology, by defining two-dimensional test cases. Starting with two distinctly different initial airfoils, two independent optimizations resulted in shapes with similar features: cambered, parabolic profiles with sharp leading- and trailing-edges. Secondly, an outboard wing section normal to the subsonic portion of the leading edge, which had a high normal angle-of attack, was considered. The optimization resulted in a shape with twist and camber that eliminated the adverse pressure gradient, hence, exploiting the leading-edge thrust. The wing section shapes obtained in all the test cases included the features predicted by previous studies. This was considered as a strong indication that the flow field analyses and sensitivity coefficients were computed and provided to the present gradient-based optimizer correctly. Also, from the results of the present study, effective optimization problem formulations could be deduced to start a full wing shape optimization.

scholarly journals Effects of leading-edge rod on dynamic stall performance of a wind turbine airfoil

2017 ◽  
Vol 231 (8) ◽  
pp. 753-769 ◽  
Author(s):  
Junwei Zhong ◽  
Jingyin Li ◽  
Penghua Guo
Keyword(s):  
Stokes Equations ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Dynamic Stall ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Moment Coefficient ◽  
Wind Turbine Airfoil ◽  
Stall Angle ◽  
The Moment

A cylindrical rod placed at the leading edge of the S809 airfoil is used as an alternative for the conventional vortex generators. In this paper, extensive numerical investigations have been conducted on the effects of the rod on the static and dynamic stall performance of the S809 airfoil. The flows around the stationary and sinusoidally oscillating S809 airfoils at Re = 106 are simulated by solving the unsteady two-dimensional Reynolds-averaged Navier–Stokes equations with the Shear Stress Transport k–ω model. For the stationary airfoil, the leading edge rod can effectively enhance the aerodynamic characteristics of the airfoil and delay the stall angle, with the maximum lift–drag ratio increased by 30.7%. For the airfoil undergoing deep dynamic stall, the rod shows the capacity of eliminating the dynamic stall vortex at the leading edge and suppressing the flow separation at the tailing edge. It also reduces the peak of the negative pitching moment and the hysteresis effects substantially, and eliminates the negative damping sub-loop of the moment coefficient. Moreover, the distance between the rod and the airfoil has a strong influence on the lift forces but little effect on drag and moment coefficients of airfoil under deep dynamic stall.

scholarly journals Effect of airfoil distance to water surface on static stall

2020 ◽  
Vol 14 (1) ◽  
pp. 6526-6537
Author(s):  
A. Yeganeh ◽  
Mohammad Hassan Djavareshkian ◽  
E. Esmaeil
Keyword(s):  
Pressure Gradient ◽  
Water Surface ◽  
Stokes Equations ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Navier Stokes ◽  
Navier Stokes Equations

In this study, viscous, turbulent, and steady flow around an airfoil near the water surface has been simulated through a numerical method. In this simulation, Navier-Stokes equations have been solved using the finite volume method with a discretized second-order accuracy and PIMPLE algorithm. The Volume of Fraction (VOF) method has been employed to predict the free surface flow. A part of the simulation results has been validated through numerical and experimental data. Besides considering the style of flow separation in the angles of numerous attacks and airfoil static stall near the surface of the water. For this purpose, the airfoil simulation has been processed airfoil in the 68,000 Reynolds number, angle of attack of 2.5 to 11 degree and different distances from the water surface ( h/c = 0.5, 1,  ). In a larger angle of attacks, flow is initially separated from the leading edge of the surface, and then it attaches to the surface at a lower point. This reattachment leads to an increase in adverse pressure gradient and the formation of a larger separation in the downstream of the airfoil. The pressure gradient dramatically increases, and the flow gets separated from the upstream of the airfoil. Upon lowering distance from the surface, static stall takes place at a higher point and a lower angle of attack, respectively.

A Computational Analysis of Flow Field in Twin-Track Subway Tunnel to Improve Air Quality

2013 ◽  
Vol 319 ◽  
pp. 599-604
Author(s):  
Makhsuda Juraeva ◽  
Kyung Jin Ryu ◽  
Sang Hyun Jeong ◽  
Dong Joo Song
Keyword(s):  
Air Quality ◽  
Computational Model ◽  
Stokes Equations ◽  
Ventilation System ◽  
Three Dimensional ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Subway Tunnel ◽  
Air Supply ◽  
And Performance

A computational model of existing Seoul subway tunnelwas analyzed in this research. The computational model was comprised of one natural ventilationshaft, two mechanical ventilationshafts, one mechanical airsupply, a twin-track tunnel, and a train. Understanding the flow pattern of the train-induced airflow in the tunnel was necessary to improve ventilation performance. The research objective wasto improve the air quality in the tunnel by investigating train-induced airflow in the twin-track subway tunnel numerically. The numerical analysis characterized the aerodynamic behavior and performance of the ventilation system by solving three-dimensional turbulent Reynolds-averaged Navier-Stokes equations. ANSYS CFX software was used for the computations. The ventilation and aerodynamic characteristics in the tunnel were investigated by analyzing the mass flowrateat the exits of the ventilation mechanicalshafts. As the train passed the mechanical ventilation shafts, the amount of discharged-air in the ventilationshafts decreased rapidly. The air at the exits of the ventilation shafts was gradually recovered with time, after the train passed the ventilation shafts. The developed mechanical air-supply for discharging dusty air and supplying clean airwas investigated.The computational results showed that the developed mechanical air-supplycould improve the air quality in the tunnel.

Numerical Study of Viscous Flows Inside Partially Filled Spinning and Coning Cylinders

1996 ◽  
Vol 118 (2) ◽  
pp. 335-340 ◽  
Author(s):  
Mohamed Selmi
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Center Of Mass ◽  
Steady Motion ◽  
Practical Interest ◽  
Nonlinear Effects ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Practical Applications ◽  
Analysis And Design

This paper is concerned with the solution of the 3-D-Navier-Stokes equations describing the steady motion of a viscous fluid inside a partially filled spinning and coning cylinder. The cylinder contains either a single fluid of volume less than that of the cylinder or a central rod and a single fluid of combined volume (volume of the rod plus volume of the fluid) equal to that of the cylinder. The cylinder rotates about its axis at the spin rate ω and rotates about an axis that passes through its center of mass at the coning rate Ω. In practical applications, as in the analysis and design of liquid-filled projectiles, the parameter ε = τ sin θ, where τ = Ω/ω and θ is the angle between spin axis and coning axis, is small. As a result, linearization of the Navier-Stokes equations with this parameter is possible. Here, the full and linearized Navier-Stokes equations are solved by a spectral collocation method to investigate the nonlinear effects on the moments caused by the motion of the fluid inside the cylinder. In this regard, it has been found that nonlinear effects are negligible for τ ≈ 0.1, which is of practical interest to the design of liquid-filled projectiles, and the solution of the linearized Navier-Stokes equations is adequate for such a case. However, as τ increases, nonlinear effects increase, and become significant as ε surpasses about 0.1. In such a case, the nonlinear problem must be solved. Complete details on how to solve such a problem is presented.

Numerical investigation of an anti-icing method on airfoil based on the NSDBD plasma actuator

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Junjie Niu ◽  
Weimin Sang ◽  
Feng Zhou ◽  
Dong Li
Keyword(s):  
Phenomenological Model ◽  
Stokes Equations ◽  
Pulse Repetition Frequency ◽  
Leading Edge ◽  
Pulse Frequency ◽  
Plasma Actuator ◽  
Navier Stokes ◽  
Peak Voltage ◽  
Content Type ◽  
Naca0012 Airfoil

Purpose This paper aims to investigate the anti-icing performance of the nanosecond dielectric barrier discharge (NSDBD) plasma actuator. Design/methodology/approach With the Lagrangian approach and the Messinger model, two different ice shapes known as rime and glaze icing are predicted. The air heating in the boundary layer over a flat plate has been simulated using a phenomenological model of the NSDBD plasma. The NSDBD plasma actuators are planted in the leading edge anti-icing area of NACA0012 airfoil. Combining the unsteady Reynolds-averaged Navier–Stokes equations and the phenomenological model, the flow field around the airfoil is simulated and the effects of the peak voltage, the pulse repetition frequency and the direction arrangement of the NSDBD on anti-icing performance are numerically investigated, respectively. Findings The agreement between the numerical results and the experimental data indicates that the present method is accurate. The results show that there is hot air covering the anti-icing area. The increase of the peak voltage and pulse frequency improves the anti-icing performance, and the direction arrangement of NSDBD also influences the anti-icing performance. Originality/value A numerical strategy is developed combining the icing algorithm with the phenomenological model. The effects of three parameters of NSDBD on anti-icing performance are discussed. The predicted results show that the anti-icing method is effective and may be helpful for the design of the anti-icing system of the unmanned aerial vehicle.

Leading Edge Film Cooling: Computations and Experiments Including Density Effects

1996 ◽  
Author(s):  
Pingfan He ◽  
Dragos Licu ◽  
Martha Salcudean ◽  
Ian S. Gartshore
Keyword(s):  
Experimental Data ◽  
Film Cooling ◽  
Stokes Equations ◽  
Leading Edge ◽  
Variable Density ◽  
Navier Stokes ◽  
Cooling Effectiveness ◽  
Stagnation Line ◽  
Film Cooling Effectiveness ◽  
Blowing Ratio

The effect of varying coolant density on film cooling effectiveness for a turbine blade-model was numerically investigated and compared with experimental data. This model had a semi-circular leading edge with four rows of laterally-inclined film cooling orifices positioned symmetrically about the stagnation line. A curvilinear coordinate-based CFD code was developed and used for the numerical investigation. The code used a domain segmentation strategy in conjunction with general curvilinear grids to model the complex blade configuration. A multigrid method was used to accelerate the convergence rate. The time-averaged, variable-density, Navier-Stokes equations together with the energy or scalar equation were solved. Turbulence closure was attained by the standard k–ε model with a near-wall k model. Either air or CO2 was used as coolant in three cases of injection through single rows and alternatively staggered double raws of holes. Two different blowing rates were investigated in each case and compared with experimental data. The experimental results were obtained using a wind tunnel model, and the mass/heat analogy was used to determine the film cooling effectiveness. The higher density of the carbon dioxide coolant (approximately 1.5 times the density of air) in the isothermal mass injection experiments, was used to simulate the effects of injection of a colder air in the corresponding adiabatic heat transfer situation. Good agreement between calculated and measured film cooling effectiveness was found for low blowing ratio M ≤ 0.5 and the effect of density was not significant. At higher blowing ratio M > 1 the calculations consistently overpredict the measured values of film cooling effectiveness.

scholarly journals Development of Hybrid Airlift-Jet Pump with Its Performance Analysis

2018 ◽  
Vol 8 (9) ◽  
pp. 1413 ◽  
Author(s):  
Dan Yao ◽  
Kwongi Lee ◽  
Minho Ha ◽  
Cheolung Cheong ◽  
Inhiug Lee
Keyword(s):  
Boundary Conditions ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Stokes Equations ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Jet Pump ◽  
Two Phase

A new pump, called the hybrid airlift-jet pump, is developed by reinforcing the advantages and minimizing the demerits of airlift and jet pumps. First, a basic design of the hybrid airlift-jet pump is schematically presented. Subsequently, its performance characteristics are numerically investigated by varying the operating conditions of the airlift and jet parts in the hybrid pump. The compressible unsteady Reynolds-averaged Navier-Stokes equations, combined with the homogeneous mixture model for multiphase flow, are used as the governing equations for the two-phase flow in the hybrid pump. The pressure-based methods combined with the Pressure-Implicit with Splitting of Operators (PISO) algorithm are used as the computational fluid dynamics techniques. The validity of the present numerical methods is confirmed by comparing the predicted mass flow rate with the measured ones. In total, 18 simulation cases that are designed to represent the various operating conditions of the hybrid pump are investigated: eight of these cases belong to the operating conditions of only the jet part with different air and water inlet boundary conditions, and the remaining ten cases belong to the operating conditions of both the airlift and jet parts with different air and water inlet boundary conditions. The mass flow rate and the efficiency are compared for each case. For further investigation into the detailed flow characteristics, the pressure and velocity distributions of the mixture in a primary pipe are compared. Furthermore, a periodic fluctuation of the water flow in the mass flow rate is found and analyzed. Our results show that the performance of the jet or airlift pump can be enhanced by combining the operating principles of two pumps into the hybrid airlift-jet pump, newly proposed in the present study.

Sign in / Sign up

Export Citation Format

Share Document