Effect of Fiber Parameters on the Mechanical Properties of Banana-Glass Fiber Hybrid Composites

2014 ◽  
Vol 592-594 ◽  
pp. 202-205
Author(s):  
V. Santhanam ◽  
M. Chandrasekaran ◽  
N. Venkateshwaran
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Fiber Length ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Synthetic Fiber

Composite materials are widely used for their superior properties such as high strength to weight ratio, high tensile strength, low thermal expansion, low density etc. Due to environmental issues the eco-friendly composites are being explored. Natural fibers as reinforcement for polymer composites are widely studied. But natural fibers lack better mechanical properties when compared with synthetic fibers. Hence mixing the natural fiber with a synthetic fiber such as glass fiber will improve mechanical properties of the composites. In this study banana fiber is mixed with glass fiber, and the mixture is used as reinforcement in epoxy matrix. The composite specimens were prepared using hand layup technique, the fibers were randomly oriented. Further the fiber length was varied as 10, 15, 20 and 25mm and volume fraction as 10%, 15%, 20% and 25%. Experiments were conducted to find the effect of fiber length and volume fraction on tensile strength, flexural strength, water absorption properties of the composites. It is observed that a fiber length of 20mm and 20% fiber volume fraction gave better mechanical properties.

scholarly journals Variation of the Mechanical Properties for Natural Fiber Reinforced Composites with Different Weight Ratio of Ziziphus Nummularia’s (Ber) Fibers

2020 ◽  
Vol 8 (6) ◽  
pp. 5393-5397
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Yield Strength ◽  
Fiber Volume Fraction ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Young Modulus ◽  
Fiber Volume

In the present era, Natural fibers are favored for the formation of composites due to their low density, high strength, biodegradability, easy production, low carbon foot, environment friendly nature in comparison of synthetic fibers. This Paper deals with NFRC made from natural fibers obtained from the plants of arid region of Western Rajasthan on which a few researchers are focusing. This paper discuss on the extraction process of fiber from the ber’s stems, manufacturing of composites by using epoxy resin & ber’s fibers then testing of its mechanical properties e.g. tensile strength, young modulus, yield strength , and percentage elongation. Six Sample were made having weight ratio - 0.1, 0.2, 0.3, 0.4, 0.45, & 0. 6. Dog bone samples were prepared according to the ASTM D638 (Type IV) standard. Tensile strength varies from 12.19 MPa to 25 MPa, while young modulus varies from 1.4GPa to 2.9GPa for different weight ratios. Yield strength varies from 10.77 MPa to 21.16 MPa. Percentage of Elongation varies from 1 to 3%. These results shows that ber’s stems can be used for fiber extraction to manufacture composites materials & for better mechanical properties minimum fiber volume fraction percentage is 13% and maximum fiber fraction is 31%.This data can be used further when optimum value of fiber volume fraction is required to form composites from ber’s fibers.

Mechanical and Morphological Properties of Sisal/Glass Fiber-Polypropylene Composites

2008 ◽  
Vol 47-50 ◽  
pp. 486-489 ◽  
Author(s):  
Kasama Jarukumjorn ◽  
Nitinat Suppakarn ◽  
Jongrak Kluengsamrong
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Weight Ratio ◽  
Morphological Properties ◽  
Fiber Reinforced ◽  
Polypropylene Composites ◽  
Specific Strength ◽  
Fiber Reinforced Polymer Composites

Natural fiber reinforced polymer composites became more attractive due to their light weight, high specific strength, biodegradability. However, some limitations e.g. low modulus, poor moisture resistance were reported. The mechanical properties of natural fiber reinforced composites can be improved by hybridization with synthetic fibers such as glass fiber. In this research, mechanical properties of short sisal-PP composites and short sisal/glass fiber hybrid composites were studied. Polypropylene grafted with maleic anhydride (PP-g-MA) was used as a compatibilizer to enhance the compatibility between the fibers and polypropylene. Effect of weight ratio of sisal and glass fiber at 30 % by weight on the mechanical properties of the composites was investigated. Morphology of fracture surface of each composite was also observed.

scholarly journals Mechanical Properties of Abaca–Glass Fiber Composites Fabricated by Vacuum-Assisted Resin Transfer Method

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2719
Author(s):  
Marissa A. Paglicawan ◽  
Carlo S. Emolaga ◽  
Johanna Marie B. Sudayon ◽  
Kenneth B. Tria
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Fiber Composites ◽  
Failure Behavior ◽  
Glass Fiber Composites ◽  
Transfer Method

The application of natural fiber-reinforced composites is gaining interest in the automotive, aerospace, construction, and marine fields due to its advantages of being environmentally friendly and lightweight, having a low cost, and having a lower energy consumption during production. The incorporation of natural fibers with glass fiber hybrid composites may lead to some engineering and industrial applications. In this study, abaca/glass fiber composites were prepared using the vacuum-assisted resin transfer method (VARTM). The effect of different lamination stacking sequences of abaca–glass fibers on the tensile, flexural, and impact properties was evaluated. The morphological failure behavior of the fractured-tensile property was evaluated by 3D X-ray Computed Tomography and Scanning Electron Microscopy (SEM). The results of mechanical properties were mainly dependent on the volume fraction of abaca fibers, glass fibers, and the arrangement of stacking sequences in the laminates. The higher volume fraction of abaca fiber resulted in a decrease in mechanical properties causing fiber fracture, resin cracking, and fiber pullout due to poor bonding between the fibers and the matrix. The addition of glass woven roving in the composites increased the mechanical properties despite the occurrence of severe delamination between the abaca–strand mat glass fiber.

scholarly journals Development and Testing of Pine Apple and Glass Fiber Reinforced Epoxy Hybrid Composites

2019 ◽  
Vol 8 (3) ◽  
pp. 2450-2453
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Synthetic Fibers ◽  
Glass Fiber Reinforced

Usage of Natural Fiber Composites (NFC) is increased rapidly due to the bio degradability nature of the fibers. These natural fibers are mixed with synthetic fibers to obtain better mechanical properties. In this study, pine apple and glass fiber reinforced epoxy composites are developed and their mechanical properties were evaluated. Composites were prepared by varying the fibers content and by using hand layup process with glass moulds of size 160 x 160 x 3 mm3 . The obtained laminates were sliced as per the ASTM criterion to test the properties. Higher glass fiber content in the composite specimen obtained higher mechanical properties. The composites can be utilized for the purpose of manufacturing components like doors panels, desks, roof tops etc.

scholarly journals The Influence of MMA Esterification on Interfacial Adhesion and Mechanical Properties of Hybrid Kenaf Bast/Glass Fiber Reinforced Unsaturated Polyester Composites

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2276
Author(s):  
Rozyanty Rahman ◽  
Syed Zhafer Firdaus Syed Putra ◽  
Shayfull Zamree Abd Rahim ◽  
Irwana Nainggolan ◽  
Bartłomiej Jeż ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Interfacial Adhesion ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Research Work ◽  
Tensile Fracture ◽  
Kenaf Bast

The demand for natural fiber hybrid composites for various applications has increased, which is leading to more research being conducted on natural fiber hybrid composites due to their promising mechanical properties. However, the incompatibility of natural fiber with polymer matrix limits the performance of the natural fiber hybrid composite. In this research work, the mechanical properties and fiber-to-matrix interfacial adhesion were investigated. The efficiency of methyl methacrylate (MMA)-esterification treatments on composites’ final product performance was determined. The composite was prepared using the hand lay-up method with varying kenaf bast fiber (KBF) contents of 10, 15, 20, 25, 30, 35 (weight%) and hybridized with glass fiber (GF) at 5 and 10 (weight%). Unsaturated polyester (UPE) resin and methyl ethyl ketone peroxide (MEKP) were used as binders and catalysts, respectively. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used to examine the effects of MMA-esterification treatment on tensile strength and morphology (tensile fracture and characterization of MMA-esterification treatment) of the composite fabricated. The tensile strength of MMA-treated reinforced UPE and hybrid composites are higher than that of untreated composites. As for MMA treatment, 90 min of treatment showed the highest weight percent gain (WPG) and tensile strength of KBF-reinforced UPE composites. It can be concluded that the esterification of MMA on the KBF can lead to better mechanical properties and adhesion between the KFB and the UPE matrix. This research provides a clear reference for developing hybrid natural fibers, thus contributing to the current field of knowledge related to GF composites, specifically in transportation diligences due to their properties of being lightweight, superior, and involving low production cost.

scholarly journals Improvement of the Mechanical Properties of Hibiscus Esculentus (Okra) Fiber Reinforced Polymer Composite

2019 ◽  
pp. 249-259
Author(s):  
D. I. Chukwuma ◽  
E. N. Ikezue ◽  
E. O. Onu ◽  
J. O. Ezeugo
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fiber Length ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Surface ◽  
Fiber Volume ◽  
The Matrix ◽  
Two Parameters ◽  
Okra Fiber

Natural fiber and their composites are the emerging trends in material science. They are speedily gaining grounds in the replacement of synthetic reinforcements. This is due to their low density, high specific mechanical strength, ultimate availability and disposability and less processing requirements. Most plant based fibers have become centers of research. This work is based on Okra fiber. Okra fiber was used as reinforcement in vinyl ester polymer matrix. Okra fiber was chemically treated using NaOH to clean fiber surface, modify the surface to increase the surface roughness and in general enhance bond strength between fiber and matrix. Reinforcement of the matrix using Okra fiber increases mechanical properties of the composite. But for optimal result, certain parameters were considered and varied. The two parameters considered were: fiber length, and proportion or volume fraction. Different variations of fiber length considered were: 10mm, 30mm and 50mm while the different fiber volume fractions considered are 10%, 30% and 50%. This work has analyzed how these parameters can be best combined for optimum values of tensile properties of the composite. The tensile strength of composite was highest at fiber length of 50mm and volume fraction of 10% at ultimate tensile strength of 214MPa.

A comparative analysis on tensile strength of dry and moisture absorbed hybrid kenaf/glass polymer composites

2017 ◽  
Vol 47 (8) ◽  
pp. 2050-2073 ◽  
Author(s):  
A Praveen Kumar ◽  
M Nalla Mohamed
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fly Ash ◽  
Tensile Properties ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Natural Fiber Composites

Economic and environmental concerns lead the researchers toward development of sustainable and renewable materials of which reinforced composites are part of. The abundantly available natural fibers have attracted the researchers to study their performance as reinforcements and feasibility for making automobile components. The performance of composite materials is mainly assessed through their mechanical properties. However, natural fibers to date were mainly used as reinforcements to create bulk composite components with reduced cost rather than improved mechanical performances. Among the methods available for improving mechanical properties of the natural fiber composites, combined mercerization treatment, hybridization, and incorporation of fly ash fillers in the matrix are the best solutions. Therefore, the objective of this research is to evaluate the tensile properties of hybrid kenaf/glass composites with and without fly ash particulate filler as per ASTM standards. Moisture absorption behavior and its effect on the tensile properties of hybrid composites are also investigated. The results revealed that the addition of 10wt % fly ash particles with natural fiber composites increased the tensile strength of composites while hybridization with glass fibers reduced the water absorption properties.

Influence of stacking sequence and orientation of the fabric on mechanical properties of twill Kenaf/Kevlar reinforced unsaturated polyester hybrid composites

2021 ◽  
pp. 152808372110199
Author(s):  
HT Sreenivas ◽  
N Krishnamurthy ◽  
MS Murali ◽  
GR Arpitha
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Synthetic Fiber ◽  
Stacking Sequence ◽  
The Matrix

The current study investigates on development of hybrid composite with Kenaf/Kevlar as reinforcement and unsaturated Polyester as the matrix considering stacking sequence, the orientation of fabric and twill 2x2 weave of the Kenaf fabric in particular. Five laminates (L1, L2, L3, L4, and L5) were developed by stacking the lamina's one over the other with the matrix and then cured in an autoclave. The laminates were subjected to experimental investigation to evaluate mechanical properties such as tensile strength, flexural strength, hardness, and impact strength. Results indicate that L5 shows good flexural strength and modulus, high hardness, and good impact strength, whereas L4 indicates the best tensile strength and tensile modulus. To summarize, the hybridization resulted in an average of 30% increased mechanical property for Laminate L5. The effect of stacking in L5 has a significant impact on the property of the composite. The results of the study were mainly focused on minimizing the use of synthetic fiber and replacing it with natural fiber. SEM analysis was performed on fractured surfaces of specimens which revealed that the failure of the laminated composite is due to poor interfacial bonding among fiber and matrix. Overall, the composite obtained from the combination of Kenaf and Kevlar fabrics had the best balance of properties finds appropriate application for car bumpers, fenders, boat hull, turbine blade etc.

Effect of Pretreatment Methods on Properties of Natural Fiber Composites: A Review

2016 ◽  
Vol 24 (7) ◽  
pp. 555-566 ◽  
Author(s):  
N. Venkatachalam ◽  
P. Navaneethakrishnan ◽  
R. Rajsekar ◽  
S. Shankar
Keyword(s):  
Mechanical Properties ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Agricultural Waste ◽  
Research Work ◽  
Natural Fibers ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Chemical Treatments

India as a tropical agricultural country has great potential to develop and use fiber derived from agricultural waste. Natural fibers are an important by-product of extraction process and they can be used as reinforcement in composite products. Composites are developed with unsaturated polyester resin as the matrix with natural fiber as the reinforcement. The results show decreased strength and modulus with increasing the fiber volume fraction. This indicates ineffective stress transfer between the fiber and matrix due to lower adhesion. It is necessary to bring a hydrophobic nature to the fibers by suitable chemical treatments in order to develop composites with improved mechanical properties. In these review papers, different types of natural fibers are subjected to a variety of physical and chemical treatments. The types of treatments studied in these papers include Physical treatments such as beating and heating, and chemical treatments like alkalization, silane, acetylation and benzoylation. The effects of these treatments on mechanical properties of the composites are analyzed. Fractures are analyzed by using the scanning electron microscopy (SEM). Analysis by FTIR and DMA showed that physico-chemical changes of surfaces of treated natural fibers. In general, treatments to the fibers can significantly improve adhesion and reduce water absorption, thereby improving mechanical properties of the composites. The purpose of this review paper is to summarize the research work done on various pretreatments in the preparation of natural fiber reinforced composites and to highlight the potential use of natural fiber reinforced polymer composites in industry and its potential to replace the synthetic fiber composite and conventional materials in the future.

scholarly journals Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1323
Author(s):  
M. J. Suriani ◽  
Hannah Zalifah Rapi ◽  
R. A. Ilyas ◽  
Michal Petrů ◽  
S. M. Sapuan
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composite ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Manufacturing Industries ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Manufacturing Defects ◽  
Reinforced Composite

In recent years, most boat fabrication companies use 100% synthetic fiber-reinforced composite materials, due to their high performance of mechanical properties. In the new trend of research on the fabrication of boat structure using natural fiber hybrid with kevlar/fiberglass-reinforced composite, the result of tensile, bending, and impact strength showed that glass fiber-reinforced polyester composite gave high strength with increasing glass fiber contents. At some point, realizing the cost of synthetic fiber is getting higher, researchers today have started to use natural fibers that are seen as a more cost-effective option. Natural fibers, however, have some disadvantages, such as high moisture absorption, due to repelling nature; low wettability; low thermal stability; and quality variation, which lead to the degradation of composite properties. In recent times, hybridization is recommended by most researchers as a solution to natural fiber’s weaknesses and to reduce the use of synthetic fibers that are not environmentally friendly. In addition, hybrid composite has its own special advantages, i.e., balanced strength and stiffness, reduced weight and cost, improved fatigue resistance and fracture toughness, and improved impact resistance. The synthetic–nature fiber hybrid composites are used in a variety of applications as a modern material that has attracted most manufacturing industries’ attention to shift to using the hybrid composite. Some of the previous studies stated that delamination and manufacturing had influenced the performance of the hybrid composites. In order to expand the use of natural fiber as a successful reinforcement in hybrid composite, the factor that affects the manufacturing defects needs to be investigated. In this review paper, a compilation of the reviews on the delamination and a few common manufacturing defect types illustrating the overview of the impact on the mechanical properties encountered by most of the composite manufacturing industries are presented.

Sign in / Sign up

Export Citation Format

Share Document