Sensing Analysis of Aluminum Alloy Materials Based on Chemical Acoustic Emission Signals

2010 ◽  
Vol 139-141 ◽  
pp. 176-179
Author(s):  
Zhong Cao ◽  
Ju Lan Zeng ◽  
Yi Min Dai ◽  
Xun Li ◽  
Dong Mei Luo
Keyword(s):  
Acoustic Emission ◽  
Ph Value ◽  
Power Spectra ◽  
Principal Component ◽  
Al Alloy ◽  
Buffer Solution ◽  
Acid Reaction ◽  
Metal Materials ◽  
Reaction Processes ◽  
Ae Signals

The frequency domain power spectra of acoustic emission (AE) signals from different metal-acid reaction processes such as 6111 Al-alloy-hydrochloric acid (HCl) and 7070 Al-alloy-HCl for evolving hydrogen gases were obtained by fast Fourier transform (FFT) program and used for chemical analysis of different metal materials. Averaged power spectra from these processes and their corresponding characteristics were extracted. The characteristic AE frequency signals could be used for chemical pattern recognition of different metal materials like 6111 and 7050 aluminum alloys from the metal-acid reaction processes, that the principal component analysis (PCA) with appropriate frequency selection procedure gave a satisfactory classification with a correct rate of 78.1%. The back-propagation (BP) algorithm of artificial neural network (ANN) could give better recognition of AE signals for 6111 and 7050 alloys with a correct rate of 100%. Moreover, the AE energetic parameters are linearly correlated with the pH value of the acidic buffer solution, which opens a new possibility for quantitatively analytical application of AE signals on metal materials.

scholarly journals A Principal Component Analysis of Acoustic Emission Signals from a Landing Gear Component

2008 ◽  
Vol 13-14 ◽  
pp. 41-47 ◽  
Author(s):  
Rhys Pullin ◽  
Mark J. Eaton ◽  
James J. Hensman ◽  
Karen M. Holford ◽  
Keith Worden ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Acoustic Emission ◽  
Background Noise ◽  
Principal Component ◽  
Component Analysis ◽  
Landing Gear ◽  
Fracture Detection ◽  
Artificial Fracture ◽  
High Level ◽  
Ae Signals

This work forms part of a larger investigation into fracture detection using acoustic emission (AE) during landing gear airworthiness testing. It focuses on the use of principal component analysis (PCA) to differentiate between fracture signals and high levels of background noise. An artificial acoustic emission (AE) fracture source was developed and additionally five sources were used to generate differing AE signals. Signals were recorded from all six artificial sources in a real landing gear component subject to no load. Further to this, artificial fracture signals were recorded in the same component under airworthiness test load conditions. Principal component analysis (PCA) was used to automatically differentiate between AE signals from different source types. Furthermore, successful separation of artificial fracture signals from a very high level of background noise was achieved. The presence of a load was observed to affect the ultrasonic propagation of AE signals.

scholarly journals Towards a Diagnostic Tool for Diagnosing Joint Pathologies: Supervised Learning of Acoustic Emission Signals

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 8091
Author(s):  
Khadijat A. Olorunlambe ◽  
Zhe Hua ◽  
Duncan E. T. Shepherd ◽  
Karl D. Dearn
Keyword(s):  
Acoustic Emission ◽  
Supervised Learning ◽  
Diagnostic Tool ◽  
Back Propagation ◽  
Principal Component ◽  
Bp Network ◽  
Nearest Neighbours ◽  
Human Joints ◽  
Exciting Development ◽  
Ae Signals

Acoustic emission (AE) testing detects the onset and progression of mechanical flaws. AE as a diagnostic tool is gaining traction for providing a tribological assessment of human joints and orthopaedic implants. There is potential for using AE as a tool for diagnosing joint pathologies such as osteoarthritis and implant failure, but the signal analysis must differentiate between wear mechanisms—a challenging problem! In this study, we use supervised learning to classify AE signals from adhesive and abrasive wear under controlled joint conditions. Uncorrelated AE features were derived using principal component analysis and classified using three methods, logistic regression, k-nearest neighbours (KNN), and back propagation (BP) neural network. The BP network performed best, with a classification accuracy of 98%, representing an exciting development for the clustering and supervised classification of AE signals as a bio-tribological diagnostic tool.

Improving Topical Skin Delivery of Monocrotaline Via Liposome Gel-based Nanosystems

2019 ◽  
Vol 16 (10) ◽  
pp. 940-950 ◽  
Author(s):  
Jiandong Yu ◽  
Zhi Chen ◽  
Yan-zhi Yin ◽  
Chaoyuan Tang ◽  
Enying Hu ◽  
...  
Keyword(s):  
Gradient Method ◽  
Encapsulation Efficiency ◽  
Ph Value ◽  
Topical Administration ◽  
Ph Gradient ◽  
Stability Factor ◽  
Buffer Solution ◽  
Skin Delivery ◽  
Skin Retention

Background: In this study, a liposomal gel based on a pH-gradient method was used to increase the skin-layer retention of monocrotaline (MCT) for topical administration. Methods: Using the Box-Behnken design, different formulations were designed to form liposome suspensions with optimal encapsulation efficiency (EE%) and stability factor (KE). In order to keep MCT in liposomes and accumulate in skin slowly and selectively, MCT liposome suspensions were engineered into gels. Results: A pH-gradient method was used to prepare liposome suspensions. The optimal formulation of liposome suspensions (encapsulation efficiency: 83.10 ± 0.21%) was as follows: MCT 12 mg, soybean phosphatidyl choline (sbPC) 200 mg, cholesterol (CH) 41 mg, vitamin E (VE) 5 mg, and citric acid buffer solution (CBS) 4.0 10 mL (pH 7.0). The final formulation of liposomal gels consisted of 32 mL liposome suspensions, 4.76 mL deionized water, 0.40 g Carbopol-940, 1.6 g glycerol, 0.04 g methylparaben, and a suitable amount of triethanolamine for pH value adjustment. The results of in vitro drug release showed that MCT in liposomal gels could be released in 12 h constantly in physiological saline as a Ritger-Peppas model. Compared with plain MCT in gel form, liposomal MCT in gel had higher skin retention in vitro. Conclusion: In this study, liposomal gels were formed for greater skin retention of MCT. It is potentially beneficial for reducing toxicities of MCT by topical administration with liposomal gel.

scholarly journals Analysis of Acoustic Emission (AE) Signals for Quality Monitoring of Laser Lap Microwelding

2021 ◽  
Vol 11 (15) ◽  
pp. 7045
Author(s):  
Ming-Chyuan Lu ◽  
Shean-Juinn Chiou ◽  
Bo-Si Kuo ◽  
Ming-Zong Chen
Keyword(s):  
Stainless Steel ◽  
Acoustic Emission ◽  
Frequency Domain ◽  
Monitoring System ◽  
Welding Quality ◽  
Steel Sheets ◽  
Signal Features ◽  
Ae Signal ◽  
Laser Microwelding ◽  
Ae Signals

In this study, the correlation between welding quality and features of acoustic emission (AE) signals collected during laser microwelding of stainless-steel sheets was analyzed. The performance of selected AE features for detecting low joint bonding strength was tested using a developed monitoring system. To obtain the AE signal for analysis and develop the monitoring system, lap welding experiments were conducted on a laser microwelding platform with an attached AE sensor. A gap between the two layers of stainless-steel sheets was simulated using clamp force, a pressing bar, and a thin piece of paper. After the collection of raw signals from the AE sensor, the correlations of welding quality with the time and frequency domain features of the AE signals were analyzed by segmenting the signals into ten 1 ms intervals. After selection of appropriate AE signal features based on a scatter index, a hidden Markov model (HMM) classifier was employed to evaluate the performance of the selected features. Three AE signal features, namely the root mean square (RMS) of the AE signal, gradient of the first 1 ms of AE signals, and 300 kHz frequency feature, were closely related to the quality variation caused by the gap between the two layers of stainless-steel sheets. Classification accuracy of 100% was obtained using the HMM classifier with the gradient of the signal from the first 1 ms interval and with the combination of the 300 kHz frequency domain signal and the RMS of the signal from the first 1 ms interval.

scholarly journals Acoustic Emission Testing and Ib-Value Analysis of Ultraviolet Light-Irradiated Fiber Composites

2021 ◽  
Vol 11 (14) ◽  
pp. 6550
Author(s):  
Doyun Jung ◽  
Wonjin Na
Keyword(s):  
Acoustic Emission ◽  
Irradiation Time ◽  
Tensile Load ◽  
Failure Behavior ◽  
Value Analysis ◽  
Emission Testing ◽  
Final Failure ◽  
Acoustic Emission Testing ◽  
Woven Glass Fiber ◽  
Ae Signals

The failure behavior of composites under ultraviolet (UV) irradiation was investigated by acoustic emission (AE) testing and Ib-value analysis. AE signals were acquired from woven glass fiber/epoxy specimens tested under tensile load. Cracks initiated earlier in UV-irradiated specimens, with a higher crack growth rate in comparison to the pristine specimen. In the UV-degraded specimen, a serrated fracture surface appeared due to surface hardening and damaged interfaces. All specimens displayed a linearly decreasing trend in Ib-values with an increasing irradiation time, reaching the same value at final failure even when the starting values were different.

Acoustic Emission Monitoring of Leaks in Pipes for Transport of Liquid and Gaseous Media: A Model Experiment

2006 ◽  
Vol 13-14 ◽  
pp. 351-356 ◽  
Author(s):  
Andreas J. Brunner ◽  
Michel Barbezat
Keyword(s):  
Acoustic Emission ◽  
Model Experiment ◽  
Structural Integrity ◽  
Fiber Composite ◽  
Leak Testing ◽  
Pipe Segment ◽  
Potential Applications ◽  
Gaseous Media ◽  
The Media ◽  
Ae Signals

In order to explore potential applications for Active Fiber Composite (AFC) elements made from piezoelectric fibers for structural integrity monitoring, a model experiment for leak testing on pipe segments has been designed. A pipe segment made of aluminum with a diameter of 60 mm has been operated with gaseous (compressed air) and liquid media (water) for a range of operating pressures (between about 5 and 8 bar). Artificial leaks of various sizes (diameter) have been introduced. In the preliminary experiments presented here, commercial Acoustic Emission (AE) sensors have been used instead of the AFC elements. AE sensors mounted on waveguides in three different locations have monitored the flow of the media with and without leaks. AE signals and AE waveforms have been recorded and analysed for media flow with pressures ranging from about 5 to about 8 bar. The experiments to date show distinct differences in the FFT spectra depending on whether a leak is present or not.

Grinding Acoustic Emission Classification in Terms of Mechanical Behaviours

2007 ◽  
Vol 329 ◽  
pp. 15-20 ◽  
Author(s):  
Xun Chen ◽  
James Griffin
Keyword(s):  
Neural Network ◽  
Acoustic Emission ◽  
Material Removal ◽  
Grinding Process ◽  
Short Time Fourier Transform ◽  
Fundamental Investigation ◽  
Mechanical Behaviours ◽  
Wavelets Transform ◽  
Short Time ◽  
Ae Signals

The material removal in grinding involves rubbing, ploughing and cutting. For grinding process monitoring, it is important to identify the effects of these different phenomena experienced during grinding. A fundamental investigation has been made with single grit cutting tests. Acoustic Emission (AE) signals would give the information relating to the groove profile in terms of material removal and deformation. A combination of filters, Short-Time Fourier Transform (STFT), Wavelets Transform (WT), statistical windowing of the WT with the kurtosis, variance, skew, mean and time constant measurements provided the principle components for classifying the different grinding phenomena. Identification of different grinding phenomena was achieved from the principle components being trained and tested against a Neural Network (NN) representation.

scholarly journals Relationships between Southeast Australian Temperature Anomalies and Large-Scale Climate Drivers

2014 ◽  
Vol 27 (4) ◽  
pp. 1395-1412 ◽  
Author(s):  
Alexandre O. Fierro ◽  
Lance M. Leslie
Keyword(s):  
Large Scale ◽  
Southern Oscillation ◽  
Power Spectra ◽  
Warm Season ◽  
Principal Component ◽  
Temperature Variability ◽  
Maximum Temperature ◽  
Past Century ◽  
Tasman Sea ◽  
Australian Continent

Abstract Over the past century, particularly after the 1960s, observations of mean maximum temperatures reveal an increasing trend over the southeastern quadrant of the Australian continent. Correlation analysis of seasonally averaged mean maximum temperature anomaly data for the period 1958–2012 is carried out for a representative group of 10 stations in southeast Australia (SEAUS). For the warm season (November–April) there is a positive relationship with the El Niño–Southern Oscillation (ENSO) and the Pacific decadal oscillation (PDO) and an inverse relationship with the Antarctic Oscillation (AAO) for most stations. For the cool season (May–October), most stations exhibit similar relationships with the AAO, positive correlations with the dipole mode index (DMI), and marginal inverse relationships with the Southern Oscillation index (SOI) and the PDO. However, for both seasons, the blocking index (BI, as defined by M. Pook and T. Gibson) in the Tasman Sea (160°E) clearly is the dominant climate mode affecting maximum temperature variability in SEAUS with negative correlations in the range from r = −0.30 to −0.65. These strong negative correlations arise from the usual definition of BI, which is positive when blocking high pressure systems occur over the Tasman Sea (near 45°S, 160°E), favoring the advection of modified cooler, higher-latitude maritime air over SEAUS. A point-by-point correlation with global sea surface temperatures (SSTs), principal component analysis, and wavelet power spectra support the relationships with ENSO and DMI. Notably, the analysis reveals that the maximum temperature variability of one group of stations is explained primarily by local factors (warmer near-coastal SSTs), rather than teleconnections with large-scale drivers.

Experiment on Surface Roughness and Acoustic Emission Signal in Infeed Period of Cylindrical Plunge Grinding

2013 ◽  
Vol 690-693 ◽  
pp. 2442-2445 ◽  
Author(s):  
Hao Lin Li ◽  
Hao Yang Cao ◽  
Chen Jiang
Keyword(s):  
Surface Roughness ◽  
Acoustic Emission ◽  
Acoustic Emission Signal ◽  
Feed Rate ◽  
Grinding Process ◽  
Experiment Research ◽  
Plunge Grinding ◽  
Emission Signal ◽  
Ae Signal ◽  
Ae Signals

This work presents an experiment research on Acoustic emission (AE) signal and the surface roughness of cylindrical plunge grinding with the different infeed time. The changed infeed time of grinding process is researched as an important parameter to compare AE signals and surface roughnesses with the different infeed time in the grinding process. The experiment results show the AE signal is increased by the increased feed rate. In the infeed period of the grinding process, the surface roughness is increased at first, and then is decreased.

Classification of journal bearing friction states based on acoustic emission signals

2018 ◽  
Vol 85 (6) ◽  
pp. 434-442 ◽  
Author(s):  
Noushin Mokhtari ◽  
Clemens Gühmann
Keyword(s):  
Acoustic Emission ◽  
Time Domain ◽  
Journal Bearing ◽  
Prediction Method ◽  
Support Vector ◽  
Mechatronic Systems ◽  
Prediction Time ◽  
Ae Signals ◽  
Bearing Friction

Abstract For diagnosis and predictive maintenance of mechatronic systems, monitoring of bearings is essential. An important building block for this is the determination of the bearing friction condition. This paper deals with the possibility of monitoring different journal bearing friction states, such as mixed and fluid friction, and examines a new approach to distinguish between different friction intensities under several speed and load combinations based on feature extraction and feature selection methods applied on acoustic emission (AE) signals. The aim of this work is to identify separation effective features of AE signals to subsequently classify the journal bearing friction states. Furthermore, the acquired features give information about the mixed friction intensity, which is significant for remaining useful lifetime (RUL) prediction. Time domain features as well as features in the frequency domain have been investigated in this work. To increase the sensitivity of the extracted features the AE signals were transformed to the frequency-time-domain using continuous wavelet transform (CWT). Significant frequency bands are determined to separate different friction states more effective. A support vector machine (SVM) is used to classify the signals into three different friction classes. In the end the idea for an RUL prediction method by using the already determined information is given and explained.

Sign in / Sign up

Export Citation Format

Share Document