Study on Character of Ilmenite Modified by Thermal Treatment

2011 ◽  
Vol 284-286 ◽  
pp. 2090-2093 ◽  
Author(s):  
Xue Liang Xiong ◽  
Zhi Yang ◽  
Hong Yong Ouyang
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Differential Thermal Analysis ◽  
Thermal Treatment ◽  
Oxidation Temperature ◽  
X Ray Diffraction ◽  
Thermo Gravimetric ◽  
X Ray

The character of ilmenite was modified by pretreatment, the effect of pre-oxidation temperature and time on structure of ilmenite were investigated by X-ray diffraction(XRD) and Thermo-gravimetric/differential thermal analysis. The results indicated that new microcrystal rutile and FeTiO3·Fe2O3 solid solution were appeared on the surface of mineral below 800°C, but evident rutile crystals and pseudobrookite Fe2O3·TiO2 were appeared above 850°C with the structure of ilmenite disrupting simultaneously. The preoxidation time increased from 15min to 60min, evident microcrystal rutile and FeTiO3·Fe2O3 solid solution were appeared by degrees without structure of ilmenite breaking.

scholarly journals Thermal Annealing and Phase Transformation of Serpentine-Like Garnierite

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 188
Author(s):  
Arun Kumar ◽  
Michele Cassetta ◽  
Marco Giarola ◽  
Marco Zanatta ◽  
Monique Le Guen ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Raman Spectroscopy ◽  
Phase Transformation ◽  
Differential Thermal Analysis ◽  
Thermal Treatment ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
Thermally Induced ◽  
X Ray ◽  
Micro Raman Spectroscopy

This study is focused on the vibrational and microstructural aspects of the thermally induced transformation of serpentine-like garnierite into quartz, forsterite, and enstatite occurring at about 620 °C. Powder specimens of garnierite were annealed in static air between room temperature and 1000 °C. The kinetic of the transformation was investigated by means of thermogravimetric and differential thermal analysis, and the final product was extensively characterized via micro-Raman spectroscopy and X-ray diffraction. Our study shows that serpentine-like garnierite consists of a mixture of different mineral species. Furthermore, these garnierites and their composition can provide details based on the mineralogy and the crystalline phases resulting from the thermal treatment.

Synthesis of Nanocrystalline Fe25Al57.5Ni17.5 by Mechanical Alloying

2012 ◽  
Vol 476-478 ◽  
pp. 1318-1321
Author(s):  
Qi Zhi Cao ◽  
Jing Zhang
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Differential Thermal Analysis ◽  
Mechanical Alloying ◽  
Ball Mill ◽  
Structural Changes ◽  
Early Stage ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray

Nanostructured Fe25Al57.5Ni17.5intermetallics was prepared directly by mechanical alloying (MA) in a high-energy planetary ball-mill. The phase transformations and structural changes occurring in the studied material during mechanical alloying were investigated by X-ray diffraction (XRD). Thermal behavior of the milled powders was examined by differential thermal analysis (DTA). Disordered Al(Fe,Ni) solid solution was formed at the early stage. After 50 h of milling, Al(Fe,Ni) solid solution transformed into Al3Ni2，AlFe3，AlFe0.23Ni0.77 phase. The power annealed at temperature 500 results in forming of intermetallics AlFe3 and FeNi3 after 5h milling. The nanocrystalline intermetallic compound was obtained after 500h milling.

Crystallization process and magnetic property of Fe81Zr3Nb6B10 alloy

2015 ◽  
Vol 29 (31) ◽  
pp. 1550196 ◽  
Author(s):  
Y. M. Sun ◽  
W. Q. Yu ◽  
D. Long ◽  
Y. Zhang ◽  
Z. Hua
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Magnetic Property ◽  
Differential Thermal Analysis ◽  
Melt Spinning ◽  
Crystallization Process ◽  
Annealing Temperature ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray

[Formula: see text] amorphous alloy was prepared by melt-spinning and annealed at various temperatures. The thermal property, microstructure and magnetic property were investigated by differential thermal analysis (DTA), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The crystallization process of [Formula: see text] alloy is as follow: Amorphous [Formula: see text] residual amorphous [Formula: see text]-[Formula: see text]-[Formula: see text]-[Formula: see text] solid solution. Coercivity [Formula: see text] of [Formula: see text] alloy changes complexly, which abruptly deteriorates at 843 K and then softens with increasing annealing temperature [Formula: see text].

GRAFTING INTERLAYER MoO42- IN Mg/Al LAYERED DOUBLE HYDROXIDE BY THERMAL TREATMENT BELOW COLLAPSING THE LAYERED STRUCTURE

2012 ◽  
Vol 06 ◽  
pp. 127-132
Author(s):  
Kennichi Muranishi ◽  
Akihiro Shimamura ◽  
Masashi Kurashina ◽  
Eiji Kanezaki
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Thermal Treatment ◽  
Layered Double Hydroxide ◽  
Interlayer Spacing ◽  
Basal Spacing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Interlayer Anion ◽  
Double Hydroxide

Some kinds of Mg / Al layered double hydroxide (LDH) with oxometalate have been prepared by mean of anion exchange. Products were characterized by powder X-ray diffraction (XRD), chemical analysis and Thermogravimetry - Differential Thermal Analysis (TG-DTA). Results showed that the basal spacing of heated LDH decreased with heating to 300 °C. This revealed the decrease of interlayer spacing and the interlayer anion being grafted to the layer of LDH because the decreased interlayer spacing of the heated LDH was smaller than the size of the interlayer anion.

scholarly journals Thermal Annealing and Phase Transformation of Serpentine-like Garnierite

2021 ◽  
Author(s):  
Arun Kumar ◽  
Michele Cassetta ◽  
Marco Giarola ◽  
Marco Zanatta ◽  
Monique Le Guen ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Phase Transformation ◽  
Differential Thermal Analysis ◽  
Thermal Treatment ◽  
Thermal Annealing ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
Thermally Induced ◽  
X Ray ◽  
Microraman Spectroscopy

This study deals with vibrational and crystallographic aspects of the thermally induced transformation of serpentine-like garnierite into quartz, forsterite, and enstatite occurring at about 620 °C. Powder specimens of garnierite have been annealed in static air between room temperature and 1000 °C. The resulting products from the transformations detected based on thermogravimetric and differential thermal analysis, have been extensively characterized via microRaman spectroscopy, and X-ray diffraction. Our study shows that serpentine-like garnierite consists of a mixture of different mineral species. Furthermore, these garnierites and their composition can provide details based on the mineralogy and the crystalline phases resulting from the thermal treatment.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals The Potential for Natural Stones from Northeastern Brazil to Be Used in Civil Construction

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 440
Author(s):  
Fabiana Pereira da Costa ◽  
Jucielle Veras Fernandes ◽  
Luiz Ronaldo Lisboa de Melo ◽  
Alisson Mendes Rodrigues ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Resistance ◽  
Mechanical Analysis ◽  
Northeastern Brazil ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Agents ◽  
Natural Stones

Natural stones (limestones, granites, and marble) from mines located in northeastern Brazil were investigated to discover their potential for use in civil construction. The natural stones were characterized by chemical analysis, X-ray diffraction, differential thermal analysis, and optical microscopy. The physical-mechanical properties (apparent density, porosity, water absorption, compressive and flexural strength, impact, and abrasion) and chemical resistance properties were also evaluated. The results of the physical-mechanical analysis indicated that the natural stones investigated have the potential to be used in different environments (interior, exterior), taking into account factors such as people’s circulation and exposure to chemical agents.

The Roman Ceramics of Salobrena (Granada-Spain) and their Raw Materials

1992 ◽  
Vol 267 ◽  
Author(s):  
Ana M De Andres ◽  
Isabel MuÑOZ
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Raw Materials ◽  
Third Century ◽  
Western Coast ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Good Number ◽  
Scanning Electron

ABSTRACTNineteen roman ceramic sherds found near Salobreña (Granada, Spain), in the western coast of the Mediterranean Sea, as well as different ceramic clays from the surroundingsare studied. Both clays and ceramic sherds are characterizad by X-ray diffraction and spectrometry, differential thermal analysis, and scanning electron and optical microscopies. A good number of the ceramic pieces, among which some “Terrae Sigillatae”, have a composition similar to that of the local clays and, thus, have been probably manufactured at Salobreña. Only a few of them have a foreign origin. For most of them, the firing temperature was about 800-850 °C, although some have been produced at 900-1000 °C, and some others at 1000-1100 °C. It is concluded that Salobreña appearsto have been an important settlement just in the third century of the Christian era.

scholarly journals Silica-Kaolin Mix Effect on Evaporative Pattern Castings Surface Roughness

2016 ◽  
Vol 16 (3) ◽  
pp. 83-88 ◽  
Author(s):  
B.V. Omidiji ◽  
R.H. Khan ◽  
M.S. Abolarin
Keyword(s):  
Thermal Analysis ◽  
Surface Roughness ◽  
Differential Thermal Analysis ◽  
Ratio Method ◽  
Gating System ◽  
X Ray Diffraction ◽  
Pouring Temperature ◽  
Material Loss ◽  
Refractory Coating ◽  
X Ray

Abstract The influence of the refractory coating which is a mixture of silica flour and kaolin on the surface roughness of the plate castings produced using evaporative patterns had been considered in this work. The kaolin was used as a binder and ratio method was employed to form basis for the factorial design of experiment which led to nine runs of experiments. Methyl alcohol at 99% concentration was used as the carrier for the transfer of the coating to the surface of the patterns. Pouring temperature was observed as a process parameter alongside the mix ratios of the coating. Attempts were made to characterize the refractory coating by using two methods; differential thermal analysis (DTA) and X-ray diffraction. Attempt was also made to characterize the casting material. Gating system design was done for the plate casting to determine the correct proportions of the gating parameters in order to construct the gating system properly to avoid turbulence during pouring of liquid metal. A digital profilometer was used to take the measurements of the surface roughness. It was observed that the mix ratio 90% silica flour-10% kaolin produced the lowest value of the surface roughness of the plate castings and had the lowest material loss in the DTA test. The pouring temperature of 650°C produced best casting.

scholarly journals SOLUBILITY OF GERMANIUM DISELENIDE IN THE Cu3AsSe4

2021 ◽  
Vol 0 (4) ◽  
pp. 67-70
Author(s):  
Z.T. Hasanova ◽  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Phase Equilibria ◽  
Solid Solutions ◽  
X Ray Diffraction ◽  
X Ray

Differential thermal analysis and powder X-ray diffraction methods were used for phase equilibria studying in the Cu3AsSe4-GeSe2 system. It was established that wide (up to 30 mol.%) solid solutions based on Cu3AsSe4 are formed. GeSe2-rich alloys consist of various heterogeneous mixtures, including phases outside the T–x plane of this section

Sign in / Sign up

Export Citation Format

Share Document