Modeling and Simulation Research on the Maintenance System of Armored Equipment

2011 ◽  
Vol 383-390 ◽  
pp. 7265-7269
Author(s):  
Yong Zhang ◽  
Hong Wei Yang ◽  
Sheng Feng Wang

The evaluation of system efficiency for the special task or reasonableness of the business flow are usually required in the maintenance system of armored equipment. The paper analyzed the process of armored equipment maintenance system. Then a simulation model of a military maintenance process is built on Extend simulation software. By means of statistical experiments, some key results are obtained including the time in finishing the system process, queue length, waiting time and the utilization of the service platform in the process, which could provide solid evidence for evaluating the system efficiency to help make the equipment support plan.

Author(s):  
ZH Yuan ◽  
SY Guo ◽  
SN Zhang ◽  
JQ Zhao ◽  
WJ Lu ◽  
...  

Based on the suspension of a missile using folding rotary wings and airbags, in order to improve the basic parameters and motion characteristics of the rotor during the unfolding process and analyze the aerodynamic characteristics of the entire device in the suspension state, after proposing a scheme of double-spin mechanism, the main folding and unfolding mechanism, initial driving device, rotating driving device, and locking mechanism were designed, and the simulation research is studied by the Automatic Dynamic Analysis of Mechanical System and Ansys Fluent Fluid Simulation software, respectively. The results show that the rotation rate was controlled at 41.8 mm/s, the various motion parameters are reasonable, and the operation process is relatively smooth, with high reliability. The speed and pressure value at the tip of the rotor are higher and the aerodynamic disturbance is obvious, which has a great influence on the aerodynamic performance. The speed and pressure distribution of the surrounding flow field is stable, the lift provided is 46 N, and the lift coefficient is 0.55, which can ensure the long-time suspension state of the missile. This paper puts forward a valuable design idea and has practical reference value for the research of the suspended missile.


1973 ◽  
Vol 5 (01) ◽  
pp. 153-169 ◽  
Author(s):  
J. H. A. De Smit

Pollaczek's theory for the many server queue is generalized and extended. Pollaczek (1961) found the distribution of the actual waiting times in the model G/G/s as a solution of a set of integral equations. We give a somewhat more general set of integral equations from which the joint distribution of the actual waiting time and some other random variables may be found. With this joint distribution we can obtain distributions of a number of characteristic quantities, such as the virtual waiting time, the queue length, the number of busy servers, the busy period and the busy cycle. For a wide class of many server queues the formal expressions may lead to explicit results.


2021 ◽  
Author(s):  
Swapneel R. Kodupuganti ◽  
Sonu Mathew ◽  
Srinivas S. Pulugurtha

The rapid growth in population and related demand for travel during the past few decades has had a catalytic effect on traffic congestion, air quality, and safety in many urban areas. Transportation managers and planners have planned for new facilities to cater to the needs of users of alternative modes of transportation (e.g., public transportation, walking, and bicycling) over the next decade. However, there are no widely accepted methods, nor there is enough evidence to justify whether such plans are instrumental in improving mobility of the transportation system. Therefore, this project researches the operational performance of urban roads with heterogeneous traffic conditions to improve the mobility and reliability of people and goods. A 4-mile stretch of the Blue Line light rail transit (LRT) extension, which connects Old Concord Rd and the University of North Carolina at Charlotte’s main campus on N Tryon St in Charlotte, North Carolina, was considered for travel time reliability analysis. The influence of crosswalks, sidewalks, trails, greenways, on-street bicycle lanes, bus/LRT routes and stops/stations, and street network characteristics on travel time reliability were comprehensively considered from a multimodal perspective. Likewise, a 2.5-mile-long section of the Blue Line LRT extension, which connects University City Blvd and Mallard Creek Church Rd on N Tryon St in Charlotte, North Carolina, was considered for simulation-based operational analysis. Vissim traffic simulation software was used to compute and compare delay, queue length, and maximum queue length at nine intersections to evaluate the influence of vehicles, LRT, pedestrians, and bicyclists, individually and/or combined. The statistical significance of variations in travel time reliability were particularly less in the case of links on N Tryon St with the Blue Line LRT extension. However, a decrease in travel time reliability on some links was observed on the parallel route (I-85) and cross-streets. While a decrease in vehicle delay on northbound and southbound approaches of N Tryon St was observed in most cases after the LRT is in operation, the cross-streets of N Tryon St incurred a relatively higher increase in delay after the LRT is in operation. The current pedestrian and bicycling activity levels seemed insignificant to have an influence on vehicle delay at intersections. The methodological approaches from this research can be used to assess the performance of a transportation facility and identify remedial solutions from a multimodal perspective.


2020 ◽  
Vol 9 (1) ◽  
pp. 63
Author(s):  
Joshua Patterson ◽  
Andrzej Korzeniowski

We use the stationary distribution for the M/M/1 with Unreliable Service and aWorking Vacation (M/M/1/US/WV) given explicitly in (Patterson & Korzeniowski, 2019) to find a decomposition of the stationary queue length N. By applying the distributional form of Little's Law the Laplace-tieltjes Transform of the stationary customer waiting time W is derived. The closed form of the expected value and variance for both N and W is found and the relationship of the expected stationary waiting time as a function of the service failure rate is determined.


2021 ◽  
pp. 153
Author(s):  
Ni Luh Putu Ari Radinasuari ◽  
Cokorda Gede Alit Semarajaya ◽  
I Made Sukewijaya

Maintenance Identification on Vertical Garden at Fairmont Sanur Beach Bali. Fairmont Sanur Beach Bali has a vertical garden with an area of 10 m x 4 m. The Hotel is able to maintain the plant condition. The purpose of this research is to identify the vertical garden maintenance system at the Fairmont Sanur Beach Bali. The research method uses survey and literature study methods. Data collection techniques are observation, interview, and literature study. Data analysis methods with descriptive methods and scoring tables. The results about the identification of vertical garden maintenance systems consist of watering, water disposal system, trimming, fertilizing, replanting plants, media replacement, sanitation, pest and disease control. Watering in 2 hours creating high humidity in the media. The volume of water released is not fully experienced evapotranspiration. The planting media do not experience drought during the day, so the plants keep fresh. In the calculation of plant suitability values, the corresponding values are Hemigraphis alternata. Plants with adequate value are Epipremnum aureum, Asparagus densiflorus, Ananas bracteatus tricolor, Schefflera Arboricola, and Portulaca grandiflora. In the maintenance process requires a fertigation system to facilitate fertilization. The use of automated systems such as timmers will simplify the maintenance and a more scheduled.


1993 ◽  
Vol 41 (11) ◽  
pp. 1687-1693 ◽  
Author(s):  
M. Yoshimoto ◽  
T. Takine ◽  
Y. Takahashi ◽  
T. Hasegawa
Keyword(s):  

2012 ◽  
Vol 576 ◽  
pp. 714-717
Author(s):  
Mohammad Iqbal ◽  
Muhammad Ridwan Andi Purnomo ◽  
Muhammad Ammar Bin Mohd Imra ◽  
Mohamed Konneh ◽  
A.N. Mustafizul Karim

Material handling is one of major components in Flexible Manufacturing System (FMS). Any improvement of material handling capability is to affect the performance of the whole system. This paper discusses the simulation study on the effect of part arrival rate and dispatching rules to the average waiting time and production rate of the FMS. The facilities of the system were modeled into simulation environment by using Arena Simulation Software. The production parameters such as machine processing times, part transportation speed and type of products were put into the model to represent the behaviors of the real system. Two rules have been considered in the study, i. e. first come first served (FCFS), and shortest processing time (SPT). Average waiting time and productivity were taken into account as performance measures of the system. The result of the study showed that SPT rule gives shorter average waiting time and higher productivity. Based on this result, the SPT rules would be used to control part transporter in order to have a better performance of the FMS.


Author(s):  
Rachel R. Chen ◽  
Subodha Kumar ◽  
Jaya Singhal ◽  
Kalyan Singhal

The (relative) cost of the customer’s waiting time has long been used as a key parameter in queuing models, but it can be difficult to estimate. A recent study introduced a new queue characteristic, the value of the customer’s waiting time, which measures how an increase in the total customer waiting time reduces the servers’ idle time. This paper connects and contrasts these two fundamental concepts in the queuing literature. In particular, we show that the value can be equal to the cost of waiting when the queue is operated at optimal. In this case, we can use the observed queue length to compute the value of waiting, which helps infer the cost of waiting. Nevertheless, these two measures have very different economic interpretations, and in general, they are not equal. For nonoptimal queues, comparing the value with the cost helps shed light on the underlying causes of the customer’s waiting. Although it is tempting to conclude that customers in a queue with a lower value of waiting expect to wait longer, we find that the value of waiting in general does not have a monotonic relationship with the expected waiting time, nor with the expected queue length.


1973 ◽  
Vol 5 (1) ◽  
pp. 170-182 ◽  
Author(s):  
J. H. A. De Smit

The general theory for the many server queue due to Pollaczek (1961) and generalized by the author (de Smit (1973)) is applied to the system with exponential service times. In this way many explicit results are obtained for the distributions of characteristic quantities, such as the actual waiting time, the virtual waiting time, the queue length, the number of busy servers, the busy period and the busy cycle. Most of these results are new, even for the special case of Poisson arrivals.


Sign in / Sign up

Export Citation Format

Share Document