Superhydrophobic and Highly Oleophobic Cotton Textile: Achieved by Silica Particles and PFPE

2009 ◽  
Vol 79-82 ◽  
pp. 683-686 ◽  
Author(s):  
Yu Gao ◽  
Shi Jun Feng ◽  
Qiang Wang ◽  
Yan Gen Huang ◽  
Feng Ling Qing
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Silica Particles ◽  
Cotton Textile ◽  
Untreated Sample ◽  
Water Contact ◽  
X Ray ◽  
In Situ Fabrication ◽  
Fabrication Procedure

The superhydrophobic and highly oleophobic cotton textile was obtained by applying particle -based in situ fabrication procedure with the low toxic perfluoropolyether (PFPE) and the silica particles. The water contact angle and salad oil contact angle on the treated cotton textile surface can be achieved to 156.8 º and 143.3 º respectively. The microstructure of the treated cotton textile surface was revealed by scanning electron microscopy (SEM). And the chemical composition of the treated cotton textile surface was determined by the X-ray photoelectron spectroscopy (XPS) analysis. Thermogravimetric (TG) analysis showed that the weight loss of the treated cotton is less than that of the untreated sample.

The Surface Modification and Characteristics of Useful Expanded PTFE Composites by Photo-Radiation Methods

2013 ◽  
Vol 690-693 ◽  
pp. 1636-1640 ◽  
Author(s):  
Te Hsing Wu ◽  
Ko Shao Chen ◽  
Lie Hang Shen
Keyword(s):  
Contact Angle ◽  
Acetic Acid ◽  
Photoelectron Spectroscopy ◽  
Plasma Deposition ◽  
Material Surface ◽  
Water Contact ◽  
X Ray ◽  
Hydrogel Film ◽  
Γ Ray ◽  
Ptfe Composites

In this study, We immobilized hydrogel material onto expanded polytetrafluoroethylene (ePTFE) film and used as an functional biomaterial. The material is a film containing titanium oxide onto polymer sheet. The hydrogel film is hydrophilic, bacterial inactivated and bio-compatible. In order to improve the ePTFE film biocompatibility, the cold plasma or γ-ray technology was used with acetic acid as monomer to deposit onto ePTFE film and then (N-isopropylacrylamide) was grafted onto the surface by radiation photo-grafting. The characteristics of the material surface were evaluated with X-ray photoelectron spectroscopy (XPS), FTIR and water contact angle. It was found that the contact angle of water on the untreated ePTFE significantly decrease from125° to 72° after ePTFE film being treated with acetic acid plasma deposition procedure. Due to the hydrophilicity of poly (N-isopropylacrylamide), so the contact angle of water on the ePTFE-g-NIPAAm almost approached to 0°. This thermal sensitive ePTFE hydrogels can be applied to artificial guiding tube and wound dressing material.

Effect of Plasma-Induced Polymerization on Contact Angle of Paper

2011 ◽  
Vol 396-398 ◽  
pp. 1619-1623
Author(s):  
Zhao Ping Song ◽  
Jun Rong Li ◽  
Hui Ning Xiao
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Polymer Grafting ◽  
Hydrophobic Property ◽  
Cellulose Fibres ◽  
Water Contact ◽  
X Ray ◽  
Factors Associated

Hydrophobic modification of cellulose fibres was conducted by plasma-induced polymer grafting in an attempt to increase the hydrophobicity of paper. Two hydrophobic monomers, i.e., butyl acrylate (BA) and 2-ethylhexyl acrylate (2-EHA) were grafted on cellulose fibres, induced by atmospheric cold plasma. Various influencing factors associated with the plasma-induced grafting were investigated, including the contact time and reaction temperature with monomers, and the dosage of monomers. Contact-angle measurement, infrared spectrum (IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) were used to ascertain the occurrence of the grafting. The results showed that the hydrophobic property of the modified paper sheet was improved significantly after the plasma-induced grafting. The water contact angle on the surface of the paper reached up to higher than125°.

Bio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection

2018 ◽  
Vol 913 ◽  
pp. 375-383
Author(s):  
Shuo Tian Sun ◽  
Yan Hua Lei ◽  
Tao Liu ◽  
Run Hua Fan ◽  
Shi Bin Sun
Keyword(s):  
Corrosion Protection ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Film Structure ◽  
Covalent Attachment ◽  
Water Contact ◽  
In Situ Fabrication ◽  
Corrosion Resistance Property

Bio-inspired in situ fabrication of 11-Mercaptoundecanoic Acid was proposed to prepare self-assembled coating of alkanethiolates on SS304 alloy. In this method, the SS304 was coated with a reactive biopolymer – Polydopamine (PDA) by dispersing them in a dopamine solution and mildly stirring at room temperature with subsequent covalent attachment of 11-Mercaptoundecanoic Acid molecules through the interaction between thiol groups and Polydopamine. The formation and surface structure of the coating were characterized by water contact angle measurement, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The electronic properties of such obtained functional film were studied by potentiodynamic polarization curve and EIS in 3.5% NaCl solution. Corrosion protection efficiency near 99 % was evaluated, and the excellent corrosion resistance property could be ascribed to the compact film structure and good seawater stability for modified SS304 surface, especially in limiting the infiltration of Cl-.

The Study of Immobilization Thermal-Sensitive Hydrogel onto ePTFE Film Use the Cold Plasma and Photo-Grafting Technique

2006 ◽  
Vol 15-17 ◽  
pp. 187-192 ◽  
Author(s):  
Ko Shao Chen ◽  
Su Chen Chen ◽  
Yi Chun Yeh ◽  
Wei Cheng Lien ◽  
Hong Ru Lin ◽  
...  
Keyword(s):  
Contact Angle ◽  
Acetic Acid ◽  
Water Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Cold Plasma ◽  
Plasma Deposition ◽  
Plasma Technology ◽  
Water Contact ◽  
X Ray ◽  
Grafting Technique

Expanded polytetrafluoroethylene (ePTFE) is a bioinert material. To improve the ePTFE film biocompatibility, the cold plasma technology was used with acetic acid as monomer to deposit onto ePTFE film and then (N-isopropylacrylamide) was grafted onto the surface by photo-grafting. The characteristics of the surface were evaluated with X-ray photoelectron spectroscopy (XPS), FTIR and water contact angle. It was found that the contact angle of water on the untreated ePTFE significantly decrease from125° to 72° after ePTFE film being treated with acetic acid plasma deposition treatment. Due to the hydrophilicity of poly(N-isopropylacrylamide), the contact angle of water on the ePTFE-g-NIPAAm approached to 0°.

Grafting Sulfoammonium Zwitterionic Brushes onto Polycarbonateurethane Surface to Improve Hemocompatibility

2011 ◽  
Vol 306-307 ◽  
pp. 1631-1634 ◽  
Author(s):  
Ya Kai Feng ◽  
Da Zhi Yang ◽  
Hai Yang Zhao ◽  
Jin Tang Guo ◽  
Qing Liang Chen ◽  
...  
Keyword(s):  
Contact Angle ◽  
Fourier Transform ◽  
Physical Properties ◽  
Water Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Potential Application ◽  
Platelet Adhesion ◽  
Fourier Transform Infrared ◽  
Water Contact ◽  
X Ray

Poly(3-dimethyl(methacryloyloxyethyl)ammonium propane sulfonate) (poly(DMAPS)) zwitterionic brushes were grafted onto the polycarbonateurethane (PCU) surface to improve its hydrophilicity and hemocompatibility by Ultraviolet (UV) polymerization. Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and water contact angle were used to characterize the chemical and physical properties of the modified PCU surface. DMAPS-grafted PCU films showed significantly high hydrophilicity owing to the high hydrophilic poly(DMAPS) zwitterionic brushes. The cytotoxicity tests revealed the sulfoammonium zwitterionic brushes modified PCU film had good cytocompatibility. In addition, the hemocompatibility of the modified PCU films was evaluated by hemolytic tests and platelet adhesion tests. The PCU films modified with zwitterionic brushes had a lower hemolytic index, showed effective resistance to platelet adhesion. Due to the fact that sulfoammonium zwitterionic brushes can improve the hemocompatibility of the PCU surface, this gives rise to its potential application as blood-contacting materials or devices.

Surface Modification of Polycarbonateurethane by Grafting Phosphorylcholine Glyceraldehydes for Improving Hemocompatibility

2012 ◽  
Vol 1403 ◽  
Author(s):  
Wei Gao ◽  
Yakai Feng ◽  
Jian Lu ◽  
Jintang Guo
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Polymer Surface ◽  
Xps Analysis ◽  
Poly Ethylene Glycol ◽  
Water Contact ◽  
X Ray ◽  
Poly Ethylene ◽  
Covalently Linked ◽  
Scanning Electron

ABSTRACTPhosphorylcholine glyceraldehyde (PCGA) was used as a phosphorylcholine (PC) group containing compound to graft onto the surface of polycarbonateurethane (PCU) film using 1,6-hexanediamine (HDA) or α,ω-diamino-poly(ethylene glycol) (APEG, Mn = 200) as a spacer, in order to introduce biomimetic structure onto the polymer surface. X-ray photoelectron spectroscopy (XPS) analysis shows that PCGA has been covalently linked to the PCU surface. Water contact angle test suggests that the surface hydrophilicity has been improved after PCGA is grafted onto the surface of PCU film. Scanning electron microscope (SEM) observation of the modified PCU films after contacting with plasma-rich plasma demonstrates that platelets rarely adhere but a large number of platelets adhere to the original PCU surface. The hemocompatibility of the PC modified PCU film has been improved obviously after grafting with PCGA with PEG spacer.

Grafting Biomimetic Phospholipid Zwitterionic Brushes onto Polycarbonateurethane for Improving Hemocompatibility

2011 ◽  
Vol 306-307 ◽  
pp. 3-6
Author(s):  
Hai Yang Zhao ◽  
Ya Kai Feng ◽  
Da Zhi Yang ◽  
Jin Tang Guo ◽  
Qing Liang Chen ◽  
...  
Keyword(s):  
Contact Angle ◽  
Fourier Transform ◽  
Water Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Potential Application ◽  
Platelet Adhesion ◽  
Material Surface ◽  
Adhesion Test ◽  
Water Contact ◽  
X Ray

In order to improve the hemocompatibility of polycarbonateurethane (PCU), the biomimetic phosphorylcholine (PC) group was introduced onto material surface. Brush structure having PC groups was formed by ultraviolet (UV) initiated polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) to improve the hydrophilicity and hemocompatibility of PCU surfaces. Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electrical microscopy (SEM) and water contact angle were used to characterize the chemical and physical properties of the modified PCU surfaces. Compared with original PCU, the PC-grafted PCU surfaces showed significantly high hydrophilicity as indicating by low water contact angle. The hemocompatibility of the PC-grafted PCU surfaces was evaluated by platelet adhesion test. The PCU surfaces modified with phosphorylcholine zwitterionic brushes showed effective resistance to platelet adhesion and high hemocompatibility. These PC-grafted PCU materials will have potential application as blood-contacting materials or devices due to their good mechanical and hemocompatible properties.

scholarly journals Natural fiber-based composites with high hydrophobic, magnetic, and EMI shielding properties via iron oxide in situ synthesis and copper film deposition

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 8384-8402
Author(s):  
Quanliang Wang ◽  
Jie Tang ◽  
Shengling Xiao ◽  
Min Wang ◽  
Sheldon Q. Shi
Keyword(s):  
Contact Angle ◽  
Iron Oxide ◽  
Natural Fiber ◽  
Copper Film ◽  
In Situ Synthesis ◽  
Film Deposition ◽  
Water Contact ◽  
X Ray ◽  
Shielding Properties

A sandwich-structured natural fiber-based magnetic composite, without the use of a binder, was developed in this study. It was fabricated via in situ synthesis, densification, and magnetron sputtering processes. The chemical composition, crystal structure, microstructure, and thermal stability were characterized via X-ray photoelectron spectroscopy, energy-dispersive spectroscopy, X-ray diffraction, scanning electron microscope, and thermogravimetric analysis. The hydrophobic, magnetic, and electromagnetic interference shielding properties were investigated by measuring the static water contact angle, the magnetic hysteresis loops, and the shielding effectiveness. The resulted composites exhibited a unique inner structure with a larger iron oxide size and content (492 nm and 26.1 wt%) on the interlayer surface in comparison to the core layer (135 nm and 18.7 wt%). The magnetic response can be controlled by the loaded iron oxide content and the copper film deposition. Sputtering copper film changed the surface free energy, and created rough micro-/nanostructures, which yielded a highly hydrophobic nature (133° in water contact angle), and approximately 99.2% of the electromagnetic energy was shielded by the 0.8 mm thick composite.

Preparation of BiOI Photocatalysts with Controllable Wettability and Their Enhanced Catalytic Degradation of 17α-ethinylestradiol

NANO ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. 2050150
Author(s):  
Sifeng Zhang ◽  
Lulu Wang ◽  
Ziguang Zheng ◽  
Yunrui Hei ◽  
Luting Zhou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Water Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Removal Rate ◽  
Chemical Properties ◽  
Water Contact ◽  
X Ray ◽  
Photocatalytic Performances

In this study, BiOI was successfully synthesized using a hydrothermal method and then modified using hexamethyldisiloxane (HMDS) and polydimethylsiloxane (PDMS), respectively, to achieve a controllable water contact angle (WCA) for these materials. The physical and chemical properties of the modified BiOI were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) method, UV–Vis diffuse reflectance spectroscopy (DRS), Fourier transform infrared (FTIR) spectroscopy and water contact angle (WCA) techniques. Compared with the unmodified BiOI, HMDS- and PDMS-modified BiOI had higher photocatalytic activities for 17[Formula: see text]-ethinylestradiol (EE2) under visible light irradiation for 28 min after reacting in dark for 30 min. When BiOI was modified using HMDS and PDMS, the WCA increased. When the WCA of HMDS- and PDMS-modified BiOI was controlled in the range of 25.3–32.7[Formula: see text] and 38.1–78.5[Formula: see text], respectively, better photocatalytic performances were achieved. When the WCA of modified BiOI was 29.7[Formula: see text] (1.00[Formula: see text]mL HMDS) and 47.8[Formula: see text] (0.20[Formula: see text]mL PDMS), the best photocatalytic performances were achieved with EE2 removal rate of 98.85% and 98.72%, respectively, however, the removal rate of the unmodified BiOI was 85.01%. The reaction rate constants of BiOI (1.00[Formula: see text]mL HMDS) and BiOI (0.20[Formula: see text]mL PDMS) were 2.33 and 2.15 times higher than the unmodified BiOI, respectively. The improved catalytic performances of modified BiOI could be attributed to the synergistic effect of the controlled wettability of BiOI and functional groups on the surface of photocatalysts.

scholarly journals Surface Modification of Polyethersulfone (PES) with UV Photo-Oxidation

Technologies ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 36
Author(s):  
Ibrahim Cisse ◽  
Sarah Oakes ◽  
Shreen Sachdev ◽  
Marc Toro ◽  
Shin Lutondo ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Contact Angle ◽  
Atomic Force Microscopy ◽  
Photoelectron Spectroscopy ◽  
Water Contact ◽  
X Ray ◽  
Force Microscopy ◽  
Photo Oxidation ◽  
Atomic Force ◽  
Modified Surfaces

Polyethersulfone (PES) films are widely employed in the construction of membranes where there is a desire to make the surface more hydrophilic. Therefore, UV photo-oxidation was studied in order to oxidize the surface of PES and increase hydrophilicity. UV photo-oxidation using low pressure mercury lamps emitting both 253.7 and 184.9 nm radiation were compared with only 253.7 nm photons. The modified surfaces were characterized using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle (WCA) measurements. Both sets of lamps gave similar results, showing an increase of the oxygen concentration up to a saturation level of ca. 29 at.% and a decrease in the WCA, i.e., an increase in hydrophilicity, down to ca. 40°. XPS detected a decrease of sp2 C-C aromatic group bonding and an increase in the formation of C-O, C=O, O=C-O, O=C-OH, O-(C=O)-O, and sulphonate and sulphate moieties. Since little change in surface roughness was observed by AFM, the oxidation of the surface caused the increase in hydrophilicity.

Sign in / Sign up

Export Citation Format

Share Document