An Inexpensive, Stable and Highly Efficient Photocatalyst for Degradation of Organic Dyes in Water: Core-Shell Montmorillonite-TiO2 Colloids

2013 ◽  
Vol 864-867 ◽  
pp. 404-407
Author(s):  
Shi Zhao Kang ◽  
Tan Wu ◽  
Xiang Qing Li ◽  
Yi Lun Zhou ◽  
Jin Mu
Keyword(s):  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Organic Dyes ◽  
Hydrothermal Process ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Highly Efficient ◽  
Transmission Electron ◽  
The Stability

Core-shell montmorillonite-TiO2 colloids were prepared in a hydrothermal process and characterized with transmission electron microscope, powder X-ray diffraction analysis, Brunauer-Emmett-Teller analysis and UV-vis spectra. Afterwards, their photocatalytic activity was investigated under UV irradiation using methyl orange as a model contaminant. In addition, the stability of the core-shell montmorillonite-TiO2 colloids was investigated by repeatedly performing methyl orange photocatalytic degradation experiments. The results indicate the as-prepared core-shell montmorillonite-TiO2 colloids are a highly efficient photocatalyst for the degradation of organic dyes in water. And this photocatalytic activity remains almost unchanged after eight successive cycles.

Preparation of CuO-Decorated Core-Shell Montmorillonite-TiO2 Colloids and their Photocatalytic Activity for Hydrogen Evolution from Water

2013 ◽  
Vol 724-725 ◽  
pp. 740-743
Author(s):  
Shi Zhao Kang ◽  
Tan Wu ◽  
Xiang Qing Li ◽  
Qi Fan Wang ◽  
Jin Mu
Keyword(s):  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Diffraction Analysis ◽  
Hydrogen Evolution ◽  
Uv Irradiation ◽  
Transmission Electron Microscope ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

CuO-decorated core-shell montmorillonite-TiO2 colloids were prepared and characterized with transmission electron microscope, powder X-ray diffraction analysis, Brunauer-Emmett-Teller analysis and UV-vis spectrua. Meanwhile, their photocatalytic activity for hydrogen evolution from water was explored under UV irradiation using methanol as a sacrificial reagent. The results indicate that they are an efficient photocatalyst with a rate of H2 evolution of 219 μmol·h-1·g-1 which is higher than that of anatase TiO2 nanoparticles.

A novel synthetic method for nanosized crystalline titania for use in the decomposition of dyes

2004 ◽  
Vol 49 (4) ◽  
pp. 177-181 ◽  
Author(s):  
C.Y. Yun ◽  
J. Moon ◽  
K. Chung ◽  
M. Kang ◽  
C.B. Shin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Activity ◽  
Hydrothermal Process ◽  
Synthetic Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nanocrystalline Titania ◽  
Transmission Electron ◽  
Bet Method

Photocatalytically active nanocrystalline titania particles were prepared using a hydrothermal process, by controlling the particle size and crystallinity. The crystalline structures and morphologies of the particles were characterized by X-ray diffraction and transmission electron microscopy. The BET method was used to determine the surface area and verify the grain size. To estimate the photocatalytic activity of the synthesized particles, a dye photodegradation experiment was carried out and the activity of the particles was compared with that of conventional titania. The results show that synthesized nanocrystalline titania particles had a higher photocatalytic activity than that of conventional titania. These findings provide a basis for the preparation of more effective and useful materials for use in AOP applications.

One-Pot Hydrothermal Synthesis of g-C3N4/BiPO4 Nanocomposites with Significant Photocatalytic Activity

2020 ◽  
Vol 20 (5) ◽  
pp. 3047-3052 ◽  
Author(s):  
Zhen-Zhao Pei ◽  
Pei Wang ◽  
Chao-Yang Li ◽  
Xiao-Liang Li ◽  
Yong-Wu He ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Diffuse Reflectance ◽  
Organic Dyes ◽  
Hydrothermal Process ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
One Pot ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Scanning Electron

The g-C3N4/BiPO4 composites have been successfully synthesized via a one-pot hydrothermal process, which can be used to degrade the organic dyes (rhodamine B and methylene blue) under simulated sunlight irradiation. X-ray diffraction (XRD), scanning electron microscope (SEM), UV-Vis diffuse reflectance spectra and Fourier transform infrared (FTIR) spectroscopy have been employed to characterize the samples. The g-C3N4/BiPO4 composites exhibited higher photocatalytic activity than pure BiPO4. And the optimum photocatalyst shows the outstanding photocatalytic activity, which exhibited 99.0% and 86.6% decolorization rate of RhB and MB, respectively.

scholarly journals Photocatalytic Degradation of Organic Contaminants by BiVO4/Graphene Oxide Nanocomposite

2018 ◽  
Vol 15 (11) ◽  
pp. 787-792 ◽  
Author(s):  
Dang Trung Tri TRINH ◽  
Duangdao CHANNEI ◽  
Willawan KHANITCHAIDECHA ◽  
Auppatham NAKARUK
Keyword(s):  
Photocatalytic Activity ◽  
Graphene Oxide ◽  
Organic Contaminants ◽  
Hydrothermal Process ◽  
Monoclinic Structure ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorbent Capacity

In the present work, a nanocomposite of bismuth vanadate (BiVO4) and Graphene oxide (GO) was synthesized successfully by using hydrothermal process. The properties of BiVO4/GO nanocomposite were examined by various techniques including X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD data indicated that pure BiVO4 nanoparticles had a monoclinic structure. Similarly, BiVO4/GO nanocomposite had the same structure without the peak of GO due to the transmission from GO to reduced GO during hydrothermal process. TEM images revealed that BiVO4 particles were integrated effectively with the GO sheets. The photocatalysis performance was evaluated by the degradation of methylene blue (MB) in an aqueous under the irradiation of visible light. The result showed that BiVO4/GO nanocomposites had higher photocatalytic activity than pure BiVO4 nanoparticles. The explanation was that GO sheets enhanced the separation of electron–hole pairs and the adsorbent capacity leading to improved photocatalytic activity.

The Microwave Synthesis and Photocatalytic Activity of ZnO/TiO2 Nanocomposites

2013 ◽  
Vol 651 ◽  
pp. 187-192 ◽  
Author(s):  
Gang Cheng Zhou ◽  
Quan Xin Zhu ◽  
Wan Qing Xiong ◽  
Jian Lei ◽  
Wen Xiang Ye ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Microwave Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Degradation Ratio

ZnO/TiO2 nanocomposites were prepared by mixing of ultrasonic vibration and sintering at 500°C for 2 h initial nano-ZnO and nano-TiO2 which were synthesized by a microwave irradiation heating technique from an aqueous solution of Zn(Ac)2•2H2O, Ti(SO4)2, respectively. The samples were characterized by the techniques of X-ray diffraction (XRD) and transmission electron microscopy (TEM). And we have also carried on research to the photocatalytic activity of the as-prepared ZnO/TiO2 nanocomposites by photo-degrading methyl orange. The result indicates that the as-prepared sample is a good photocatalyst. When m (TiO2) /m (ZnO) ratio was equal to 4, the photocatalytic activity of the nanocomposites is best. The result shows that the degradation ratio of the methyl orange (2mg/L) has reached 93% within 80 min

scholarly journals Facile Organometallic Synthesis of Fe-Based Nanomaterials by Hot Injection Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1141
Author(s):  
Georgia Basina ◽  
Hafsa Khurshid ◽  
Nikolaos Tzitzios ◽  
George Hadjipanayis ◽  
Vasileios Tzitzios
Keyword(s):  
Room Temperature ◽  
Colloidal Particles ◽  
Iron Pentacarbonyl ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Organometallic Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Hot Injection ◽  
The Stability

Fe-based colloids with a core/shell structure consisting of metallic iron and iron oxide were synthesized by a facile hot injection reaction of iron pentacarbonyl in a multi-surfactant mixture. The size of the colloidal particles was affected by the reaction temperature and the results demonstrated that their stability against complete oxidation related to their size. The crystal structure and the morphology were identified by powder X-ray diffraction and transmission electron microscopy, while the magnetic properties were studied at room temperature with a vibrating sample magnetometer. The injection temperature plays a very crucial role and higher temperatures enhance the stability and the resistance against oxidation. For the case of injection at 315 °C, the nanoparticles had around a 10 nm mean diameter and revealed 132 emu/g. Remarkably, a stable dispersion was created due to the colloids’ surface functionalization in a nonpolar solvent.

Photocatalytic Activity of Fe-Doped ZnO/Montmorillonite Nanocomposite for Degradation of Malachite Green

2015 ◽  
Vol 827 ◽  
pp. 19-24 ◽  
Author(s):  
Nur Afifah ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh
Keyword(s):  
Photocatalytic Activity ◽  
Malachite Green ◽  
Organic Dyes ◽  
Uv Light ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spin Resonance ◽  
Doped Zno ◽  
Co Precipitation

In this study, the photocatalytic activity of pure Fe- doped ZnO and Fe- doped ZnO/Montmorillonite nanocomposite has been investigated for the degradation of malachite green under UV light irradiation. Both photocatalysts were synthesized using co-precipitation method and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier-transform infrared absorption, and electron spin resonance. The results showed that the photocatalytic efficiency is better in the presence of montmorillonite compared to pure Fe- doped ZnO. To detect the possible reactive species involved in degradation of organic dyes control experiments with introducing scavengers into the solution of organic dyes were carried out. It is found that electron plays an important role in the degradation of malachite green.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

scholarly journals Hydrothermal Synthesis of Iodine-Doped Nanoplates with Enhanced Visible and Ultraviolet-Induced Photocatalytic Activities

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Jiang Zhang ◽  
Zheng-Hong Huang ◽  
Yong Xu ◽  
Feiyu Kang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Oxygen Vacancies ◽  
Diffuse Reflectance Spectroscopy ◽  
Synergetic Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Photocatalytic Activities

The iodine-doped Bi2WO6(I-BWO) photocatalyst was prepared via a hydrothermal method using potassium iodide as the source of iodine. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. The photocatalytic activity of I-BWO for the degradation of rhodamine B (RhB) was higher than that of pure BWO and I2-BWO regardless of visible light (>420 nm) or ultraviolet light (<400 nm) irradiation. The results of DRS analysis showed that the I-BWO and I2-BWO catalysts had narrower band gaps. XPS analysis proved that the multivalent iodine species including I0and were coadsorbed on the defect surface of Bi2WO6in I-BWO. The enhanced PL intensity revealed that a large number of defects of oxygen vacancies were formed by the doping of iodine. The enhanced photocatalytic activity of I-BWO for degradation of RhB was caused by the synergetic effect of a small crystalline size, a narrow band gap, and plenty of oxygen vacancies.

Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property

2011 ◽  
Vol 306-307 ◽  
pp. 410-415
Author(s):  
Li Sun ◽  
Fu Tian Liu ◽  
Qi Hui Jiang ◽  
Xiu Xiu Chen ◽  
Ping Yang
Keyword(s):  
Average Diameter ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Shell Particles ◽  
Core Shell Nanoparticles

Core/shell type nanoparticles with an average diameter of 20nm were synthesized by chemical precipitation method. Firstly, Monodisperse Fe3O4 nanoparticles were synthesized by solvethermal method. FeSO4ž7H2O and NaBH4 were respectively dissolved in distilled water, then moderated Fe3O4 particles and surfactant(PVP) were ultrasonic dispersed into the FeSO4ž7H2O solution. The resulting solution was stirred 2 h at room temperature. Fe could be deposited on the surface of monodispersed Fe3O4 nanoparticles to form core-shell particles. The particles were characterized by using various experimental techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), AGM and DTA. The results suggest that the saturation magnetization of the nanocomposites is 100 emu/g. The composition of the samples show monodisperse and the sides of the core/shell nanoparticles are 20-30nm. It is noted that the formation of Fe3O4/Fe nanocomposites magnetite nanoparticles possess superparamagnetic property.

Sign in / Sign up

Export Citation Format

Share Document