Research on Matlab Simulation Output of Optical Current Transformer

2014 ◽  
Vol 981 ◽  
pp. 133-136
Author(s):  
Tao Shen ◽  
Chao Hu ◽  
Qian Ru Yang ◽  
Ming Xin Song ◽  
Xin Lao Wei
Keyword(s):  
Simulation Analysis ◽  
Noise Analysis ◽  
Current Transformer ◽  
Theory Model ◽  
Matlab Simulation ◽  
Arm Processor ◽  
Quartic Curve ◽  
Function Fitting ◽  
Fitting Method ◽  
The Relationship

The theory model of the reflective optical current transformer (OCT) has been established using Jones matrix method, and the proper devices have been chose. According to the characteristics of the transformer’s output, signal processing circuits including photoelectric translating circuit, preamplifier, correlation detector, lowpass filter and ARM processor have been designed. The simulation mode was established in the Matlab environment. The simulation analysis as well as the noise analysis was carried out. Finally, the analysis of the relationship between transformer's input and output was analyzed by using function fitting method. The fitting coefficients and error were given and quadratic or quartic curve fitting was proposed.

Research on Bus Stop Based on Cellular Automaton Model

2014 ◽  
Vol 1008-1009 ◽  
pp. 1484-1488
Author(s):  
Jun Qian ◽  
Yong Ju Hu
Keyword(s):  
Cellular Automaton ◽  
Traffic Flow ◽  
Simulation Analysis ◽  
Flow Characteristics ◽  
Negative Influence ◽  
Traffic Density ◽  
Matlab Simulation ◽  
Bus Stop ◽  
Local Roads ◽  
The Relationship

Based on the NaSch model,a cellular automaton mode with two lanes is proposed by computer simulation analysis,which considers the influence of passengers on bus stop.By using MatLab simulation,the paper compares the different traffic flow characteristics between harbor-shaped and nonharbor shaped bus stop.It also analyzes the relationship between the traffic flow and the number of bus,the scope and intensity of bus stop in different ways.The results show that harbor-shaped bus stop is the effective method to alleviate the crowd traffic in the case of larger traffic density;It takes more passengers in the system which used harbor shaped bus stop can accommodate more buses;Harbor-shaped bus stop produced better improvement in the negative influence of bus stopping on local roads.

Pulse-Width Modulated Amplifier for DC Servo System and Its Matlab Simulation

2015 ◽  
Vol 9 (1) ◽  
pp. 625-631
Author(s):  
Ma Xiaocheng ◽  
Zhang Haotian ◽  
Cheng Yiqing ◽  
Zhu Lina ◽  
Wu Dan
Keyword(s):  
Mathematical Model ◽  
Transfer Function ◽  
Input Signal ◽  
Pulse Width ◽  
Rotation Speed ◽  
Servo Motor ◽  
Matlab Simulation ◽  
Pulse Width Modulated ◽  
Signal Changes ◽  
The Relationship

This paper introduces a mathematical model for Pulse-Width Modulated Amplifier for DC Servo Motor. The relationship between pulse-width modulated (PWM) signal and reference rotation speed is specified, and a general model of motor represented by transfer function is also put forward. When the input signal changes, the rotation speed of the servo motor will change accordingly. By changing zeros and poles, transient performance of this system is discussed in detail, and optimal ranges of the parameters is recommended at the end of discussion.

Influence Parameters Analysis of Forming Quality and System Dynamics Simulation of Vertical Steel Bar Benting

2013 ◽  
Vol 483 ◽  
pp. 280-284
Author(s):  
Xi Jian Zheng ◽  
Xin Zhuo Wang ◽  
Jin Meng Zhang ◽  
Yu Fei Zhu
Keyword(s):  
Simulation Analysis ◽  
Reference Value ◽  
Dynamics Simulation ◽  
Forming Quality ◽  
Steel Bar ◽  
New Process ◽  
Cutting Length ◽  
Bending Radius ◽  
The Relationship

The vertical steel bar bending forming is a kind of new process of bending method. The bending speed, bending radius and clamping length H which is the parameters of vertical steel bar bending machine , is directly affect the quality of bending forming parts. This paper calculated the length of reinforcement before being incised and the springback angle of bending steel bar which obtained the reasonable cutting length and bending Angle; Then based on rigid-flexible virtual prototype technology to build the dynamics model of vertical steel bar bending system. Through simulation analysis ,it obtained the relationship between bending speed, bending radius , clamping length H and forming quality of bending steel bar. In this paper, the analysis method have reference value to the design of similar steel bar bending machines.

scholarly journals Flux control coefficients determined by inhibitor titration: the design and analysis of experiments to minimize errors

1993 ◽  
Vol 296 (2) ◽  
pp. 423-433 ◽  
Author(s):  
J R Small
Keyword(s):  
Random Errors ◽  
Flux Control ◽  
Graph Method ◽  
Function Fitting ◽  
Fitting Method ◽  
Simple Extrapolation ◽  
Experimental Errors ◽  
Flux Control Coefficients ◽  
Fitted Function ◽  
Control Coefficients

This paper is a study into the effects of experimental error on the estimated values of flux control coefficients obtained using specific inhibitors. Two possible techniques for analysing the experimental data are compared: a simple extrapolation method (the so-called graph method) and a non-linear function fitting method. For these techniques, the sources of systematic errors are identified and the effects of systematic and random errors are quantified, using both statistical analysis and numerical computation. It is shown that the graph method is very sensitive to random errors and, under all conditions studied, that the fitting method, even under conditions where the assumptions underlying the fitted function do not hold, outperformed the graph method. Possible ways of designing experiments to minimize the effects of experimental errors are analysed and discussed.

scholarly journals Algorithm and Simulation of Association Rules of Drug Relationship Based on Network Model

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Hui Teng ◽  
Yukun Ma ◽  
Di Teng
Keyword(s):  
Decision Making ◽  
Network Model ◽  
Association Rules ◽  
Association Rule ◽  
Simulation Analysis ◽  
Pharmaceutical Research ◽  
Accurate Analysis ◽  
Systematic Analysis ◽  
Relationship Of ◽  
The Relationship

Studying drug relationships can provide deeper information for the construction and maintenance of biomedical databases and provide more important references for disease treatment and drug development. The research model has expanded from the previous focus on a certain drug to the systematic analysis of the pharmaceutical network formed between drugs. Network model is suitable for the study of the nonlinear relationship of the pharmaceutical relationship by modeling the data learning. Association rule mining is used to find the potential correlations between the various sets of massive data. Therefore, based on the network model, this research proposed an algorithm for drug interaction under improved association rules, which achieved accurate analysis and decision-making of drug relationship. Meanwhile, this research applied the established association rule algorithm to discuss the relationship between Chinese medicine and mental illness medicine and conducted the algorithm research and simulation analysis of the association relationship. The results showed the association rule algorithm based on the network model constructed was better than other association algorithms. It had reliability and superiority in decision-making in improving the drug-drug relationship. It also promoted the rational use of medicines and played a guiding role in pharmaceutical research. This provides scientific research personnel with research basis and research ideas for disease-related diagnosis.

scholarly journals BASELINE ERROR ANALYSIS AND EXPERIMENTAL VALIDATION FOR HEIGHT MEASUREMENT OF FORMATION INSAR SATELLITE

2018 ◽  
Vol XLII-3 ◽  
pp. 371-376
Author(s):  
X. Gao ◽  
T. Li ◽  
X. Zhang ◽  
X. Geng
Keyword(s):  
Stochastic Model ◽  
Error Propagation ◽  
Experimental Validation ◽  
Simulation Analysis ◽  
Srtm Dem ◽  
Height Measurement ◽  
Spatial Distribution Characteristics ◽  
Propagation Rule ◽  
The Relationship ◽  
Baseline Error

In this paper, we proposed the stochastic model of InSAR height measurement by considering the interferometric geometry of InSAR height measurement. The model directly described the relationship between baseline error and height measurement error. Then the simulation analysis in combination with TanDEM-X parameters was implemented to quantitatively evaluate the influence of baseline error to height measurement. Furthermore, the whole emulation validation of InSAR stochastic model was performed on the basis of SRTM DEM and TanDEM-X parameters. The spatial distribution characteristics and error propagation rule of InSAR height measurement were fully evaluated.

Walking Stability Analysis of Multi-Legged Crablike Robot over Slope

2013 ◽  
Vol 572 ◽  
pp. 636-639
Author(s):  
Xi Chen ◽  
Gang Wang
Keyword(s):  
Mathematical Model ◽  
Stability Analysis ◽  
Stability Criterion ◽  
Stability Margin ◽  
Static Stability ◽  
Matlab Simulation ◽  
And Performance ◽  
The Stability ◽  
The Mathematical Model ◽  
The Relationship

This paper deals with the walking stability analysis of a multi-legged crablike robot over slope using normalized energy stability margin (NESM) method in order to develop a common stabilization description method and achieve robust locomotion for the robot over rough terrains. The robot is simplified with its static stability being described by NESM. The mathematical model of static stability margin is built so as to carry out the simulation of walking stability over slope for the crablike robot that walks in double tetrapod gait. As a consequence, the relationship between stability margin and the height of the robots centroid, as well as its inclination relative to the ground is calculated by the stability criterion. The success and performance of the stability criterion proposed is verified through MATLAB simulation and real-world experiments using multi-legged crablike robot.

Research on the Kinematics Simulation of Out-Moving Jaw Crusher Based on Nastran

2013 ◽  
Vol 433-435 ◽  
pp. 63-66
Author(s):  
Jiang Yong
Keyword(s):  
Simulation Model ◽  
Simulation Analysis ◽  
Dynamic Performance ◽  
Theory Model ◽  
Structure Design ◽  
Side Plate ◽  
Jaw Crusher ◽  
Kinematics Simulation ◽  
Motion Characteristics ◽  
Dynamic Performance Analysis

In this paper, out-moving jaw crusher machine is regarded as the research object and we established the simulation model of virtual prototype based on Nastran. Through the simulation analysis of the movement process, trajectories of moving jaw side plate and a movable jaw toggle plate and related parameters were obtained and compared and verify the simulation model and theory model. The results show that: the simulation model reflects the motion characteristics of the theoretical model well. So it provides theoretical reference for improvement of dynamic performance analysis and structure design of jaw crusher and has important application value in engineering.

Sign in / Sign up

Export Citation Format

Share Document