Vibration-Based Damage Detection under Changing Environmental and Operational Conditions

2012 ◽  
Vol 83 ◽  
pp. 95-104 ◽  
Author(s):  
Claus Peter Fritzen ◽  
Peter Kraemer ◽  
Inka Buethe
Keyword(s):  
Damage Detection ◽  
Reference Data ◽  
Null Space ◽  
Laboratory Model ◽  
Data Sets ◽  
Structural Vibrations ◽  
Dynamic Changes ◽  
Operational Conditions ◽  
Order Of Magnitude ◽  
Using Data

Structural Health Monitoring (SHM) allows to perform a diagnosis on demand which assists the operator to plan his future maintenance or repair activities. Using structural vibrations to extract damage sensitive features, problems can arise due to variations of the dynamical properties with changing environmental and operational conditions (EOC). The dynamic changes due to changing EOCs like variations in temperature, rotational speed, wind speed, etc. may be of the same order of magnitude as the variations due to damage making a reliable damage detection impossible. In this paper, we show a method for the compensation of changing EOC. The well-known null space based fault detection (NSFD) is used for damage detection. In the first stage, a training is performed using data from the undamaged structure under varying EOC. For the compensation of the EOC-e ects the undamaged state is modeled by different reference data corresponding to different representative EOC conditions. Finally, in the application, the influences of one or other EOC on each incoming data is weighted separately by means of a fuzzy-classiffcation algorithm. The theory and algorithm is successfully tested with data sets from a real wind turbine and with data from a laboratory model.

Development of Data Sets for the Validation of Analytical Instrumentation

1994 ◽  
Vol 77 (3) ◽  
pp. 777-781 ◽  
Author(s):  
Stephen L R Ellison ◽  
Maurice G Cox ◽  
Alastatr B Forbes ◽  
Bernard P Butler ◽  
Simon A Hannaby ◽  
...  
Keyword(s):  
Multivariate Regression ◽  
Reference Data ◽  
Dynamic Range ◽  
Null Space ◽  
Data Sets ◽  
Statistical Parameters ◽  
Incorrect Choice ◽  
Wide Range ◽  
Null Space Methods ◽  
Numerical Precision

Abstract Analytical chemistry makes use of a wide range of basic statistical operations, including means; standard deviations; significance tests based on assumed distributions; and linear, polynomial, and multivariate regression. The effects of limited numerical precision, poor choice of algorithm, and extreme dynamic range on these common statistical operations are discussed. The effects of incorrect choice of algorithm on calculations of basic statistical parameters and calibration lines are illustrated by examples. Some approaches to validation of such software are considered. The preparation of reference data sets for testing statistical software is discussed. The use of ‘null space’ methods for producing reference data sets is described, and an example is given. These data sets have well-characterized properties and can be used to test the accuracy of basic statistical procedures. Specific properties that are controlled include the numerical precision required to represent the sets exactly and the analytically correct answers. A further property of some of the data sets under development is the predictability of the deviation from the expected results resulting from poor choice of algorithm.

Diagnostics of metal samples using the results of experimental and theoretical study of positively charged microparticles formed upon sample destruction

2018 ◽  
Vol 84 (10) ◽  
pp. 23-28
Author(s):  
D. A. Golentsov ◽  
A. G. Gulin ◽  
Vladimir A. Likhter ◽  
K. E. Ulybyshev
Keyword(s):  
Experimental Data ◽  
Early Stage ◽  
Experimental Studies ◽  
Material Model ◽  
Total Charge ◽  
Cross Sectional ◽  
Practical Applications ◽  
Mechanical And Electrical Properties ◽  
Order Of Magnitude ◽  
Using Data

Destruction of bodies is accompanied by formation of both large and microscopic fragments. Numerous experiments on the rupture of different samples show that those fragments carry a positive electric charge. his phenomenon is of interest from the viewpoint of its potential application to contactless diagnostics of the early stage of destruction of the elements in various technical devices. However, the lack of understanding the nature of this phenomenon restricts the possibility of its practical applications. Experimental studies were carried out using an apparatus that allowed direct measurements of the total charge of the microparticles formed upon sample rupture and determination of their size and quantity. The results of rupture tests of duralumin and electrical steel showed that the size of microparticles is several tens of microns, the particle charge per particle is on the order of 10–14 C, and their amount can be estimated as the ratio of the cross-sectional area of the sample at the point of discontinuity to the square of the microparticle size. A model of charge formation on the microparticles is developed proceeding from the experimental data and current concept of the electron gas in metals. The model makes it possible to determine the charge of the microparticle using data on the particle size and mechanical and electrical properties of the material. Model estimates of the total charge of particles show order-of-magnitude agreement with the experimental data.

Assessment of Regional Explosion Discriminants Using Data Sets of Unparalleled Spatial Sampling

2012 ◽  
Author(s):  
Kate C. Miller ◽  
Lindsay L. Worthington ◽  
Steven Harder ◽  
Scott Phillips ◽  
Hans Hartse ◽  
...  
Keyword(s):  
Spatial Sampling ◽  
Data Sets ◽  
Using Data

Multiple data parameter identification for nonlinear conceptual models

1997 ◽  
Vol 36 (5) ◽  
pp. 61-68 ◽  
Author(s):  
Hermann Eberl ◽  
Amar Khelil ◽  
Peter Wilderer
Keyword(s):  
Optimization Problem ◽  
Conceptual Models ◽  
Reference Data ◽  
Transport Model ◽  
Calibration Method ◽  
Data Sets ◽  
Multiple Data ◽  
Marquardt Algorithm ◽  
Multicriteria Optimization Problem ◽  
Higher Order Differential Equations

A numerical method for the identification of parameters of nonlinear higher order differential equations is presented, which is based on the Levenberg-Marquardt algorithm. The estimation of the parameters can be performed by using several reference data sets simultaneously. This leads to a multicriteria optimization problem, which will be treated by using the Pareto optimality concept. In this paper, the emphasis is put on the presentation of the calibration method. As an example identification of the parameters of a nonlinear hydrological transport model for urban runoff is included, but the method can be applied to other problems as well.

scholarly journals Bridge Damage Detection Approach Using a Roving Camera Technique

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1246 ◽  
Author(s):  
Darragh Lydon ◽  
Myra Lydon ◽  
Rolands Kromanis ◽  
Chuan-Zhi Dong ◽  
Necati Catbas ◽  
...  
Keyword(s):  
Low Cost ◽  
Normal Operation ◽  
Laboratory Model ◽  
Traffic Patterns ◽  
Operational Conditions ◽  
Bridge Model ◽  
Detection Approach ◽  
Bridge Damage ◽  
Computer Vision Technology ◽  
Climate Events

Increasing extreme climate events, intensifying traffic patterns and long-term underinvestment have led to the escalated deterioration of bridges within our road and rail transport networks. Structural Health Monitoring (SHM) systems provide a means of objectively capturing and quantifying deterioration under operational conditions. Computer vision technology has gained considerable attention in the field of SHM due to its ability to obtain displacement data using non-contact methods at long distances. Additionally, it provides a low cost, rapid instrumentation solution with low interference to the normal operation of structures. However, even in the case of a medium span bridge, the need for many cameras to capture the global response can be cost-prohibitive. This research proposes a roving camera technique to capture a complete derivation of the response of a laboratory model bridge under live loading, in order to identify bridge damage. Displacement is identified as a suitable damage indicator, and two methods are used to assess the magnitude of the change in global displacement under changing boundary conditions in the laboratory bridge model. From this study, it is established that either approach could detect damage in the simulation model, providing an SHM solution that negates the requirement for complex sensor installations.

scholarly journals Using Machine Learning Methods to Identify Particle Types from Doppler Lidar Measurements in Iceland

2021 ◽  
Vol 13 (13) ◽  
pp. 2433
Author(s):  
Shu Yang ◽  
Fengchao Peng ◽  
Sibylle von Löwis ◽  
Guðrún Nína Petersen ◽  
David Christian Finger
Keyword(s):  
Machine Learning ◽  
Weather Conditions ◽  
Dust Storms ◽  
Machine Learning Algorithms ◽  
Lidar Data ◽  
Data Sets ◽  
Doppler Lidar ◽  
Lidar Measurements ◽  
Using Data ◽  
Filter Noise

Doppler lidars are used worldwide for wind monitoring and recently also for the detection of aerosols. Automatic algorithms that classify the lidar signals retrieved from lidar measurements are very useful for the users. In this study, we explore the value of machine learning to classify backscattered signals from Doppler lidars using data from Iceland. We combined supervised and unsupervised machine learning algorithms with conventional lidar data processing methods and trained two models to filter noise signals and classify Doppler lidar observations into different classes, including clouds, aerosols and rain. The results reveal a high accuracy for noise identification and aerosols and clouds classification. However, precipitation detection is underestimated. The method was tested on data sets from two instruments during different weather conditions, including three dust storms during the summer of 2019. Our results reveal that this method can provide an efficient, accurate and real-time classification of lidar measurements. Accordingly, we conclude that machine learning can open new opportunities for lidar data end-users, such as aviation safety operators, to monitor dust in the vicinity of airports.

scholarly journals Nebula: ultra-efficient mapping-free structural variant genotyper

2021 ◽  
Author(s):  
Parsoa Khorsand ◽  
Fereydoun Hormozdiari
Keyword(s):  
Large Scale ◽  
Structural Variants ◽  
Sequencing Technologies ◽  
Generic Framework ◽  
Common Genetic Variants ◽  
Order Of Magnitude ◽  
Complex Events ◽  
Comparable Accuracy ◽  
Using Data ◽  
Computational Resources

Abstract Large scale catalogs of common genetic variants (including indels and structural variants) are being created using data from second and third generation whole-genome sequencing technologies. However, the genotyping of these variants in newly sequenced samples is a nontrivial task that requires extensive computational resources. Furthermore, current approaches are mostly limited to only specific types of variants and are generally prone to various errors and ambiguities when genotyping complex events. We are proposing an ultra-efficient approach for genotyping any type of structural variation that is not limited by the shortcomings and complexities of current mapping-based approaches. Our method Nebula utilizes the changes in the count of k-mers to predict the genotype of structural variants. We have shown that not only Nebula is an order of magnitude faster than mapping based approaches for genotyping structural variants, but also has comparable accuracy to state-of-the-art approaches. Furthermore, Nebula is a generic framework not limited to any specific type of event. Nebula is publicly available at https://github.com/Parsoa/Nebula.

scholarly journals Critical Aspects of Person Counting and Density Estimation

2021 ◽  
Vol 7 (2) ◽  
pp. 21
Author(s):  
Roland Perko ◽  
Manfred Klopschitz ◽  
Alexander Almer ◽  
Peter M. Roth
Keyword(s):  
Density Estimation ◽  
Network Architecture ◽  
Reference Data ◽  
State Of The Art ◽  
Limit State ◽  
Ground Truth ◽  
Data Sets ◽  
Ground Truth Generation ◽  
Baseline Approach ◽  
Critical Aspects

Many scientific studies deal with person counting and density estimation from single images. Recently, convolutional neural networks (CNNs) have been applied for these tasks. Even though often better results are reported, it is often not clear where the improvements are resulting from, and if the proposed approaches would generalize. Thus, the main goal of this paper was to identify the critical aspects of these tasks and to show how these limit state-of-the-art approaches. Based on these findings, we show how to mitigate these limitations. To this end, we implemented a CNN-based baseline approach, which we extended to deal with identified problems. These include the discovery of bias in the reference data sets, ambiguity in ground truth generation, and mismatching of evaluation metrics w.r.t. the training loss function. The experimental results show that our modifications allow for significantly outperforming the baseline in terms of the accuracy of person counts and density estimation. In this way, we get a deeper understanding of CNN-based person density estimation beyond the network architecture. Furthermore, our insights would allow to advance the field of person density estimation in general by highlighting current limitations in the evaluation protocols.

Structural Damage Assessment Using Output-Only Measurement: Localization and Quantification

2013 ◽  
Author(s):  
Chin-Hsiung Loh ◽  
Min-Hsuan Tseng ◽  
Shu-Hsien Chao
Keyword(s):  
Damage Detection ◽  
Damage Assessment ◽  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Null Space ◽  
Singular Spectrum Analysis ◽  
Damage Index ◽  
Computation Efficiency ◽  
Output Only

One of the important issues to conduct the damage detection of a structure using vibration-based damage detection (VBDD) is not only to detect the damage but also to locate and quantify the damage. In this paper a systematic way of damage assessment, including identification of damage location and damage quantification, is proposed by using output-only measurement. Four level of damage identification algorithms are proposed. First, to identify the damage occurrence, null-space and subspace damage index are used. The eigenvalue difference ratio is also discussed for detecting the damage. Second, to locate the damage, the change of mode shape slope ratio and the prediction error from response using singular spectrum analysis are used. Finally, to quantify the damage the RSSI-COV algorithm is used to identify the change of dynamic characteristics together with the model updating technique, the loss of stiffness can be identified. Experimental data collected from the bridge foundation scouring in hydraulic lab was used to demonstrate the applicability of the proposed methods. The computation efficiency of each method is also discussed so as to accommodate the online damage detection.

POSTPARTUM AMENORRHOEA IN RURAL EASTERN UTTAR PRADESH, INDIA

1998 ◽  
Vol 30 (2) ◽  
pp. 227-243
Author(s):  
K. N. S. YADAVA ◽  
S. K. JAIN
Keyword(s):  
Higher Education ◽  
Uttar Pradesh ◽  
Current Status Data ◽  
North India ◽  
Current Status ◽  
Data Sets ◽  
Survival Status ◽  
The Mean ◽  
The Difference ◽  
Using Data

This paper calculates the mean duration of the postpartum amenorrhoea (PPA) and examines its demographic, and socioeconomic correlates in rural north India, using data collected through 'retrospective' (last but one child) as well as 'current status' (last child) reporting of the duration of PPA.The mean duration of PPA was higher in the current status than in the retrospective data;n the difference being statistically significant. However, for the same mothers who gave PPA information in both the data sets, the difference in mean duration of PPA was not statistically significant. The correlates were identical in both the data sets. The current status data were more complete in terms of the coverage, and perhaps less distorted by reporting errors caused by recall lapse.A positive relationship of the mean duration of PPA was found with longer breast-feeding, higher parity and age of mother at the birth of the child, and the survival status of the child. An inverse relationship was found with higher education of a woman, higher education of her husband and higher socioeconomic status of her household, these variables possibly acting as proxies for women's better nutritional status.

Sign in / Sign up

Export Citation Format

Share Document