Factors Affecting the Fracture Strength of Freestanding Diamond Films

2013 ◽  
Vol 537 ◽  
pp. 1-6
Author(s):  
J.H. Song ◽  
F.X. Lu ◽  
L.F. Hei ◽  
C.M. Li ◽  
W.Z. Tang ◽  
...  
Keyword(s):  
Mechanical Behavior ◽  
Fracture Strength ◽  
Diamond Films ◽  
Deep Understanding ◽  
Nitrogen Addition ◽  
Engineering Material ◽  
Factors Affecting ◽  
Deposition Parameters ◽  
Technology Applications ◽  
New Type

As an emerging brand new type of engineering material for a variety of important high technology applications, the deep understanding of the mechanical behavior of freestanding diamond films has become an emergent task of vital importance. Unfortunately the mechanical behavior of this brand new material is not fully understood. Effects that affect the fracture strength are still not very clear except that the fracture strength of freestanding diamond films is only depended on the grain size (film thickness), and is insensitive to the microscopic defects, and the strength is considerably higher when the nucleation side is in tension than that when the growth side is in tension. However, this is not the full story. Based on the experimental date accumulated in USTB (University of Science and Technology Beijing) for high power dc arcjet diamond films, other factors that may affect the fracture strength of freestanding diamond films are discussed in detail. Effects of the quality of the diamond films, impurities (nitrogen, hydrogen, non-diamond carbon etc.), film morphology and texture, on fracture strength are discussed. Effects of the deposition parameters are explained. Advantages for small amount of nitrogen addition, and for the use of higher substrate temperatures in the increase in fracture strength are demonstrated, which have already been applied in the mass production of tool grade freestanding diamond films. It is hoped that the present paper will be helpful for those who wish to understand and use this brand new type of engineering material

A Review on Mechanical Properties of Freestanding Diamond Films

2012 ◽  
Vol 490-495 ◽  
pp. 3059-3064 ◽  
Author(s):  
Li Fu Hei ◽  
Fan Xiu Lu ◽  
Cheng Ming Li ◽  
Wei Zhong Tang ◽  
Guang Chao Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Fracture Strength ◽  
Diamond Films ◽  
Deep Understanding ◽  
Plasma Jet ◽  
Arc Plasma ◽  
Engineering Material ◽  
New Type ◽  
Dc Arc

As an emerging brand new type of engineering material for a variety of important high technology applications, the deep understanding of the mechanical behavior of freestanding diamond films has become an emergent task of vital importance. Of the many deposition methods dc arc plasma jet has been regarded as the most promising technique for large area high quality and low cost production of freestanding diamond films. In the present paper, recent progress in mechanical properties of freestanding diamond films mainly by high power dc arc plasma jet with rotating arc root and gas recycling is reviewed. Testing methods for fracture strength and fracture toughness are discussed. Experimental data are presented and compared to that by MWCVD. Dc arcjet diamond films start to oxidize at about 700°C, however, oxidation up to 800°C for 10 min does not affect the fracture strength. Fracture mechanism is discussed. The strange mechanical behavior of freestanding diamond films is explained. It is surprising that CVD diamond film is such a kind of material which is strong, but full of different size of defects. It is hoped that the present paper will be helpful for those who wish to understand and use this brand new type of engineering material.

Cut Flowers Being Sold as Impulse Items: A Look at Factors Affecting Impulse Product Merchandising

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 558c-558
Author(s):  
Jennifer B. Neujahr ◽  
Karen L.B. Gast
Keyword(s):  
Consumer Behavior ◽  
Marketing Strategies ◽  
Easy Access ◽  
Future Research ◽  
Grocery Stores ◽  
Cut Flowers ◽  
Factors Affecting ◽  
New Type ◽  
The 1950S ◽  
The Way

Consumer behavior research seems to play an big role in determining the wants and needs of an industry. This research helps to shape the way we market to the consumers and helps make marketing strategies more effective. In the 1950s grocery stores began to sell horticulture products in order to alleviate the growers' surplus. Supermarkets now have seem to found their niche in this market due to the fact that they can influence their consumers to buy their flowers right along with their bread, and get all of their shopping done at once. This new type of sale, commonly referred to as the impulse sale, can relate directly to how well the store is merchandised and maintained. A study was conducted at a local supermarket, to determine the following: good locations for impulse sales items, special conditions affecting impulse sales items, and what types of things could affect demand for impulse items. It was discovered that certain locations make better sales than other locations. Locations that were front and center and allowed easy access to seeing the mixed flower bouquet without having to touch it yielded the best results. The variables used to show a change in demand showed little to some variability and has raised some questions which may be used to conduct future research.

Qualitative Analysis of Underlying Factors Affecting Vaccine Hesitancy in Iran- A Study Protocol (Preprint)

2020 ◽  
Author(s):  
Salime Goharinezhad
Keyword(s):  
Vaccine Coverage ◽  
Deep Understanding ◽  
World Health ◽  
Vaccine Hesitancy ◽  
Slight Reduction ◽  
Cultural Variation ◽  
Global Public Health ◽  
Factors Affecting ◽  
Wide Range ◽  
Context Specific

BACKGROUND World Health Organization declared the vaccine hesitancy as a global public health threat in 2019. Since even a slight reduction in vaccine coverage rates can lead to a decrease in herd immunity, it is imperative to explore the underlying factors affecting vaccine hesitancy. in specific contexts, considering socioeconomic and cultural variation, to ensure interventions targeting hesitancy are well formulated and intervened. OBJECTIVE The main objective of this study is to identify underlying factors affecting vaccine hesitancy in Iran. METHODS A framework qualitative study will be conducted in the west of Tehran province in 2020. Participants in the study will be recruited hesitance-parents who extracted from the SIB system (an electronic health record in Iran) to maximize diversity. Interviews will be analyzed based on ''Determinants of Vaccine Hesitancy Matrix'' which developed by the WHO-SAGE Working Group. RESULTS deep understanding from the context-specific reasons for vaccine hesitancy cause to formulate better strategies to address them. The ultimate goal of this study is to inform future policies to increase the uptake of the vaccine in Iran. CONCLUSIONS This result of study will show variety opinions about vaccination among different types of socioeconomic and demographic households. The wide range of reasons related to vaccine hesitancy imply to more comprehensive, context-specific interventions. Today, the most important intervention issues focus on improving information about effectiveness and safety of vaccines, while other interventions for promoting vaccination is need to addressed.

scholarly journals A Comprehensive Review of the Mechanical Behavior of Suspension Bridge Tunnel-Type Anchorage

2019 ◽  
Vol 2019 ◽  
pp. 1-19 ◽  
Author(s):  
Yafeng Han ◽  
Xinrong Liu ◽  
Ning Wei ◽  
Dongliang Li ◽  
Zhiyun Deng ◽  
...  
Keyword(s):  
Mechanical Behavior ◽  
Failure Modes ◽  
Load Transfer ◽  
Mechanical Response ◽  
Soft Rock ◽  
Suspension Bridge ◽  
Development Trend ◽  
Factors Affecting ◽  
Research Results ◽  
Rock Strata

The recent surge of interest towards the mechanical response of rock mass produced by tunnel-type anchorage (TTA) has generated a handful of theories and an array of empirical explorations on the topic. However, none of these have attempted to arrange the existing achievements in a systematic way. The present work puts forward an integrative framework laid out over three levels of explanation and practical approach, mechanical behavior, and calculation method of the ultimate pullout force to compare and integrate the existing findings in a meaningful way. First, it reviews the application of TTA in China and analyzes its future development trend. Then, it summarizes the research results of TTA in terms of load transfer characteristics, deformation characteristics, failure modes, and calculation of ultimate uplift resistance. Finally, it introduces four field model tests in soft rock (mainly mudstone formations), and some research results are obtained. Furthermore, it compares the mechanical behavior of TTA in hard rock strata and soft rock strata, highlighting the main factors affecting the stability of TTA in soft rock formation. This paper proposes a series of focused topics for future investigation that would allow deconstruction of the drivers and constraints of the development of TTA.

Correlation between fracture strength and crystal orientation of freestanding diamond films

Carbon ◽  
2003 ◽  
Vol 41 (3) ◽  
pp. 603-606 ◽  
Author(s):  
Hengda Zhang ◽  
Jinze Tian ◽  
Weizhong Tang ◽  
Fanxiu Lu
Keyword(s):  
Fracture Strength ◽  
Crystal Orientation ◽  
Diamond Films

A Review of Preparation and Tribological Applications of Pickering Emulsion

2021 ◽  
pp. 1-27
Author(s):  
Yichen Bao ◽  
Kai Liu ◽  
Quan Zheng ◽  
Lulu Yao ◽  
Yufu Xu
Keyword(s):  
Pickering Emulsion ◽  
Solid Particles ◽  
Preparation Methods ◽  
Factors Affecting ◽  
Long Term Stability ◽  
New Strategy ◽  
New Type ◽  
The Stability ◽  
Near Future

Abstract Pickering emulsion is a new type of stable emulsion made by ultra-fine solid particles instead of traditional surfactants as stabilizers, which has received widespread attention in recent years. The preparation methods of stator-rotor homogenization, high-pressure homogenization, and ultrasonic emulsification were compared with others in this work. The main factors affecting the stability of Pickering emulsion are the surface humidity of the solid particles, the polarity of the oil phase, and the oil-water ratio. These factors could affect the nature of the solid particles, the preparation process of Pickering emulsion and the external environment. Consequently, the long-term stability of Pickering emulsion is still a challenge. The tribological investigations of Pickering emulsion were summarized, and the multifunctional Pickering emulsion shows superior prospects for tribological applications. Moreover, the latest development of Pickering emulsion offers a new strategy for smart lubrication in the near future.

Effects of nitrogen addition on morphology and mechanical property of DC arc plasma jet CVD diamond films

2004 ◽  
Vol 13 (1) ◽  
pp. 139-144 ◽  
Author(s):  
J.X Yang ◽  
H.D Zhang ◽  
C.M Li ◽  
G.C Chen ◽  
F.X Lu ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Diamond Films ◽  
Plasma Jet ◽  
Nitrogen Addition ◽  
Cvd Diamond ◽  
Arc Plasma ◽  
Dc Arc

Fracture strength and toughness of chemical-vapor-deposited polycrystalline diamond films

2018 ◽  
Vol 44 (15) ◽  
pp. 17845-17851 ◽  
Author(s):  
Kang An ◽  
Liangxian Chen ◽  
Xiongbo Yan ◽  
Xin Jia ◽  
Jinlong Liu ◽  
...  
Keyword(s):  
Fracture Strength ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Polycrystalline Diamond ◽  
Chemical Vapor Deposited ◽  
Strength And Toughness

The growth of barley grass (Hordeum leporinum) in annual pasture. 3. Some factors affecting balance with subterranean clover (Trifolium subterraneum)

1968 ◽  
Vol 8 (35) ◽  
pp. 702 ◽  
Author(s):  
DF Smith
Keyword(s):  
Soil Nitrogen ◽  
Subterranean Clover ◽  
Trifolium Subterraneum ◽  
Moisture Stress ◽  
Nitrogen Addition ◽  
The Other ◽  
Early Start ◽  
Factors Affecting ◽  
Two Factors ◽  
Hordeum Leporinum

Mixed swards of barley grass (Hordeum leporinum) and subterranean clover (Trifolium subterraneum) of two densities were grown at two levels of nitrogen. Growth was started at two different times mid- April and mid-May-and at each time half the plots were subjected to moisture stress. The swards were harvested after nine weeks of growth. The survival of clover plants was reduced by an early start, moisture stress and nitrogen addition : much more so than barley grass. The root : shoot ratios of both species were calculated ; both showed some sensitivity to the time of break and moisture stress, and the grass was also affected by the other two factors. Total sward production and the ratios of clover to grass varied widely Grass daminance was favoured by moisture stress or a late break, and both of these factors tended to override the effect of higher soil nitrogen in determining clover-grass balance. Total sward production more dependent on density than any other factor, especially with the later start. Higher nitrogen was effective in boosting production only if the break was early and there was no moisture stress.

Sign in / Sign up

Export Citation Format

Share Document