Simulation of Adhesion Performance of Mortar-Mortar Interface with Varied Fractographic Features

2013 ◽  
Vol 577-578 ◽  
pp. 357-360
Author(s):  
Ayumi Satoh ◽  
Kanji Yamada ◽  
Yasuji Shinohara
Keyword(s):  
Mechanical Properties ◽  
Material Properties ◽  
Crack Path ◽  
Fem Simulation ◽  
Interface Model ◽  
Projected Length ◽  
Adhesion Performance ◽  
Fractographic Features ◽  
The Relationship ◽  
Combination Of Material

This paper aims at revealing the relationship between fractographic parameters of the mortar-mortar interface and the mechanical properties of such interface in terms of flexural strength and fracture energy. The FEM simulation was conducted where 8 cases of the combination of material properties were applied for all 7 interface models. The fractographic parameters evaluated on each interface model were six. Among them, both Sd (standard deviation of the height) and RL (ratio of the real length of the crack path to the projected length) are closely related to the mechanical properties.

Evaluating Mechanical Properties of Ceramics by Relative Methods

2007 ◽  
Vol 336-338 ◽  
pp. 2406-2410
Author(s):  
Yi Wang Bao ◽  
Xiao Xue Bu ◽  
Yan Chun Zhou ◽  
Li Zhong Liu
Keyword(s):  
Mechanical Properties ◽  
Material Properties ◽  
Ceramic Coatings ◽  
Relative Method ◽  
Tempered Glass ◽  
Theoretic Analysis ◽  
Surface Strength ◽  
Indirect Approach ◽  
Before And After ◽  
The Relationship

A relative method, defined as indirect approach to evaluate the material properties via the relationship between unknown properties and a known property, is proposed to estimate some properties that could not be measured by the traditional methods for ceramics. Experiments and theoretic analysis based on the relative method were carried out in this study to estimate the properties in following aspects: determining the temperature dependence of elastic modulus of some machineable ceramics by comparing the deflections; obtaining the modulus and strength of ceramic coatings supported by substrates, from the variation in properties of the rectangular beam samples before and after coating; estimating the residual stresses in tempered glass by comparing the change in the surface strength after strengthening.

Impact of Grain Structure and Material Properties on Via Extrusion in 3-D Interconnects

2014 ◽  
Vol 2014 (1) ◽  
pp. 000008-000012
Author(s):  
Tengfei Jiang ◽  
Chenglin Wu ◽  
Jay Im ◽  
Rui Huang ◽  
Paul S. Ho
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Analytical Model ◽  
Material Properties ◽  
Grain Structure ◽  
Silicon Vias ◽  
The Relationship

In this paper, the effects of Cu microstructure on the mechanical properties and extrusion of though-silicon vias (TSVs) were studied based on two types of TSVs with different microstructure. A direct correlation was found between the grain size and the mechanical properties of the vias. Both an analytical model and FEA were used to establish the relationship between the mechanical properties and via extrusion. The effect of via/Si interface on extrusion was also studied by FEA. The results suggest small and uniform grains in the Cu vias, as well as stronger interfaces between the via and Si led to smaller via extrusion, and are thus preferable for reduced via extrusion failure and improved TSV reliability.

Impact of Grain Structure and Material Properties on Via Extrusion in 3D Interconnects

2015 ◽  
Vol 12 (3) ◽  
pp. 118-122 ◽  
Author(s):  
Tengfei Jiang ◽  
Chenglin Wu ◽  
Jay Im ◽  
Rui Huang ◽  
Paul S. Ho
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Grain Size ◽  
Finite Element ◽  
Analytical Model ◽  
Material Properties ◽  
Grain Structure ◽  
Element Analysis ◽  
Silicon Vias ◽  
The Relationship

In this article, the effects of Cu microstructure on the mechanical properties and extrusion of through-silicon vias (TSVs) were studied based on two types of TSVs with different microstructure. A direct correlation was found between the grain size and the mechanical properties of the vias. Both an analytical model and finite element analysis (FEA) were used to establish the relationship between the mechanical properties and via extrusion. The effect of via/Si interface on extrusion was also studied by FEA. The results suggest small and uniform grains in the Cu vias, as well as stronger interfaces between the via and Si led to smaller via extrusion, and are thus preferable for reduced via extrusion failure and improved TSV reliability.

scholarly journals Анализ усталостного разрушения рельсовой стали

2020 ◽  
Vol 62 (10) ◽  
pp. 1573
Author(s):  
С.А. Атрошенко ◽  
С.С. Майер ◽  
В.И. Смирнов
Keyword(s):  
Mechanical Properties ◽  
Transverse Crack ◽  
Three Point Bending ◽  
Cyclical Load ◽  
Fractographic Features ◽  
The Relationship

In present paper attempt was made to find a relationship between the mechanical properties of the material in microvolumes and the properties of the material under load. A fractograph-ic analysis of the surface of the fatigued scrap rail with the inner transverse crack is given. The relationship between the fractographic features and the structure of the material is dis-cussed. A sample with an internal transverse crack in the head of the rail was removed from service after an intense cyclical load in the railway switch. For metallographic research, the sample was subjected to three-point bending. On the surface of the destruction of the rail re-vealed three areas, differing in the degree of brittleness of the material.

Predictive modeling of material properties for aircraft control cables

2020 ◽  
Vol 92 (10) ◽  
pp. 1533-1538
Author(s):  
Hande Yavuz
Keyword(s):  
Mechanical Properties ◽  
Response Surface ◽  
Thermomechanical Treatment ◽  
Predictive Modeling ◽  
Material Properties ◽  
Carbon Steels ◽  
Alloying Elements ◽  
Aircraft Control ◽  
Content Type ◽  
The Relationship

Purpose This study aims to investigate the relationship between material properties and alloying elements of carbon steels through predictive modeling. Aircraft control cables are usually made of steel materials and subjected to deformation because of the motion of control surfaces such as aileron, rudder, elevator and trailing edge flaps. Investigation of the relationship between material properties and alloying elements would therefore be explored. Design/methodology/approach This study is focused on the modeling of mechanical properties of carbon steels concerning the content of alloying elements by using response surface methodology with false discovery rate (FDR) correction approach. SAS Institute JMP data analysis software was used to develop response and argument relationships in various carbon steels without including thermomechanical treatment effect. Mechanical properties were considered as tensile strength, yield strength, ductility, and Brinell hardness. Carbon (0.28 Wt.%-0.46 Wt.%) and manganese (0.7 Wt.%-0.9 Wt.%) proportions were gathered from ASM Handbook. Linear regression models were tested for the statistical adequacy by using analysis of variance and statistical significance analysis. A posterior probability, which refers to Benjamini–Hochberg FDR (BH-FDR), was embedded as multiple testing corrections of the t-test p-values. Findings Predictive modeling of the material properties for aircraft control cables was successfully achieved by using the response surface method with BH-FDR significance level of 0.05. Originality/value The effect of statistically developed graphical interactions of alloying elements on the common mechanical properties of such steels would provide prompt comparison to material suppliers and part manufacturers except those subjected to thermomechanical treatment applications.

Determination of the Mechanical Properties of Thermally Treated Recycled Glass Based on Nano-Indentation Measurement and FEM Supported Simulation

2013 ◽  
Vol 581 ◽  
pp. 472-477 ◽  
Author(s):  
Mikdam Jamal ◽  
Michael Morgan
Keyword(s):  
Mechanical Properties ◽  
Material Properties ◽  
Plastic Material ◽  
Optimization Algorithms ◽  
Measurement Data ◽  
Fem Simulation ◽  
Object Boundary ◽  
Recycled Glass ◽  
Nanoindentation Measurement ◽  
Thermally Treated

This paper reports on an inverse finite element modelling (FEM) simulation developed from nanoindentation measurement data. The FEM simulation was used to predict the mechanical properties of a thermally treated recycled glass. This material is a patented innovation used to manufacture abrasive media for vibratory mass finishing processes. A parametric study of the accuracy of the simulation results has been completed to verify the FEM and to assess the influence of a variation in sample size, tip geometry, frictional condition and material properties on the force displacement curves during the loading and unloading stages. Also examined were the mesh density sensitivity and the effect of object boundary condition. The model was post-processed employing novel objective optimization algorithms in order to determine comprehensive material properties. It was found from the proposed optimization algorithms that the mechanical properties of an assumed elastic perfectly plastic material can be determined using only a single indenter geometry. The nanoindentation results show that the heat treatment cycle has a substantial effect on the predicted mechanical properties of the recycled glass.

Cytocompatibility and Material Properties of Poly-carbonate Urethane/Carbon Nanofiber Composites for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanofibers ◽  
Material Properties ◽  
Carbon Nanofiber ◽  
Scar Tissue ◽  
Tissue Response ◽  
Positive Interactions ◽  
Weight Percentage ◽  
Poly Carbonate

AbstractCarbon nanofibers possess excellent conductivity properties, which may be beneficial in the design of more effective neural prostheses, however, limited evidence on their cytocompatibility properties exists. The objective of the present in vitro study was to determine cytocompatibility and material properties of formulations containing carbon nanofibers to predict the gliotic scar tissue response. Poly-carbonate urethane was combined with carbon nanofibers in varying weight percentages to provide a supportive matrix with beneficial bulk electrical and mechanical properties. The substrates were tested for mechanical properties and conductivity. Astrocytes (glial scar tissue-forming cells) were seeded onto the substrates for adhesion. Results provided the first evidence that astrocytes preferentially adhered to the composite material that contained the lowest weight percentage of carbon nanofibers. Positive interactions with neurons, and, at the same time, limited astrocyte functions leading to decreased gliotic scar tissue formation are essential for increased neuronal implant efficacy.

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

scholarly journals Water lubrication of graphene oxide-based materials

Friction ◽  
2021 ◽  
Author(s):  
Shaoqing Xue ◽  
Hanglin Li ◽  
Yumei Guo ◽  
Baohua Zhang ◽  
Jiusheng Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Lubrication Theory ◽  
Lubricant Additives ◽  
Water Lubrication ◽  
Broad Application ◽  
Water Dispersibility ◽  
Metal Processing ◽  
The Relationship ◽  
Ph Concentration

AbstractWater is as an economic, eco-friendly, and efficient lubricant that has gained widespread attention for manufacturing. Using graphene oxide (GO)-based materials can improve the lubricant efficacy of water lubrication due to their outstanding mechanical properties, water dispersibility, and broad application scenarios. In this review, we offer a brief introduction about the background of water lubrication and GO. Subsequently, the synthesis, structure, and lubrication theory of GO are analyzed. Particular attention is focused on the relationship between pH, concentration, and lubrication efficacy when discussing the tribology behaviors of pristine GO. By compounding or reacting GO with various modifiers, amounts of GO-composites are synthesized and applied as lubricant additives or into frictional pairs for different usage scenarios. These various strategies of GO-composite generate interesting effects on the tribology behaviors. Several application cases of GO-based materials are described in water lubrication, including metal processing and bio-lubrication. The advantages and drawbacks of GO-composites are then discussed. The development of GO-based materials for water lubrication is described including some challenges.

Structure and properties of a phenylethynyl-terminated PMDA-type asymmetric polyimide

2018 ◽  
Vol 31 (3) ◽  
pp. 261-272 ◽  
Author(s):  
Yixiang Zhang ◽  
Masahiko Miyauchi ◽  
Steven Nutt
Keyword(s):  
Mechanical Properties ◽  
Thermal Processing ◽  
Amorphous Structure ◽  
Decomposition Temperature ◽  
Thermal And Mechanical Properties ◽  
Chain Mobility ◽  
Amorphous Structures ◽  
The Cross ◽  
Imide Oligomers ◽  
The Relationship

A new polymerized monomeric reactant (PMR)-type polyimide, designated TriA X, was investigated to determine polymer structure, processability, thermal, and mechanical properties and establish the relationship between the molecular structure and those properties. TriA X is a PMR-type polyimide with an asymmetric, irregular, and nonplanar backbone. Both the imide oligomers and the cross-linked polyimides of TriA X exhibited loose-packed amorphous structures, independent of thermal processing. The peculiar structures were attributed to the asymmetric backbone, which effectively prevented the formation of closed-packed chain stacking typically observed in polyimides. The imide oligomers exhibited a lower melt viscosity than a control imide oligomer (symmetric and semi-crystalline), indicating a higher chain mobility above the glass transition temperature ( Tg). The cured polyimide exhibited a Tg = 362°C and a decomposition temperature = 550°C. The cross-linked TriA X exhibited exceptional toughness and ductility (e.g. 15.1% at 23°C) for a polyimide, which was attributed to the high-molecular-weight oligomer and loose-packed amorphous structure. The thermal and mechanical properties of TriA X surpass those of PMR-15 and AFR-PE-4.

Sign in / Sign up

Export Citation Format

Share Document