HA/TCP Scaffolds Coated by PLA and Gelatin: Preliminary In Vitro Evaluation

2014 ◽  
Vol 631 ◽  
pp. 289-294
Author(s):  
Leonardo Ribeiro Rodrigues ◽  
Cecília Amélia de Carvalho Zavaglia ◽  
Christiane Bertachini Lombello
Keyword(s):  
Electron Microscopy ◽  
Tissue Engineering ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Cell Types ◽  
Cell Interaction ◽  
Bone Tissue Regeneration ◽  
Polymer Foam ◽  
X Ray

The importance of this work is development of two methods to try to improve the bone tissue regeneration. The surface of scaffold was modified in order to favor cell interaction, through adhesion and proliferation. PLA and gelatin were used. PLA has shown in literature good results in bone tissue engineering. The gelatin is used as coating in cell culture plates to improve cell attachment for a variety of cell types, including osteoblast. Hydroxyapatite (HA) and tricalcium phosphate (TCP) were used due to its known properties in tissue engineering. It was used the polymer foam replication technique to produce the scaffolds. For characterization were used: scanning electron microscopy (SEM), optical microscopy (OP), stereoscopy, transmission electron microscopy (TEM), X-ray microtomography (Micro-CT), X-ray diffraction (XRD) and X-ray fluorescence (XRF). The scaffolds showed morphology with adequate porosity for tissue engineering and thein vitrotest showed evidence of not being cytotoxic.

scholarly journals Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery

2021 ◽  
Vol 8 (8) ◽  
pp. 107
Author(s):  
Lilis Iskandar ◽  
Lucy DiSilvio ◽  
Jonathan Acheson ◽  
Sanjukta Deb
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Vinyl Alcohol ◽  
Maxillofacial Surgery ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Poly Vinyl Alcohol ◽  
Oral And Maxillofacial Surgery

Despite considerable advances in biomaterials-based bone tissue engineering technologies, autografts remain the gold standard for rehabilitating critical-sized bone defects in the oral and maxillofacial (OMF) region. A majority of advanced synthetic bone substitutes (SBS’s) have not transcended the pre-clinical stage due to inferior clinical performance and translational barriers, which include low scalability, high cost, regulatory restrictions, limited advanced facilities and human resources. The aim of this study is to develop clinically viable alternatives to address the challenges of bone tissue regeneration in the OMF region by developing ‘dual network composites’ (DNC’s) of calcium metaphosphate (CMP)—poly(vinyl alcohol) (PVA)/alginate with osteogenic ions: calcium, zinc and strontium. To fabricate DNC’s, single network composites of PVA/CMP with 10% (w/v) gelatine particles as porogen were developed using two freeze–thawing cycles and subsequently interpenetrated by guluronate-dominant sodium alginate and chelated with calcium, zinc or strontium ions. Physicochemical, compressive, water uptake, thermal, morphological and in vitro biological properties of DNC’s were characterised. The results demonstrated elastic 3D porous scaffolds resembling a ‘spongy bone’ with fluid absorbing capacity, easily sculptable to fit anatomically complex bone defects, biocompatible and osteoconductive in vitro, thus yielding potentially clinically viable for SBS alternatives in OMF surgery.

scholarly journals Osteogenic Properties of 3D-Printed Silica-Carbon-Calcite Composite Scaffolds: Novel Approach for Personalized Bone Tissue Regeneration

2021 ◽  
Vol 22 (2) ◽  
pp. 475
Author(s):  
Parastoo Memarian ◽  
Francesco Sartor ◽  
Enrico Bernardo ◽  
Hamada Elsayed ◽  
Batur Ercan ◽  
...  
Keyword(s):  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Three Dimensional ◽  
Bone Tissue Regeneration ◽  
Hemolysis Assay ◽  
Novel Approach ◽  
Related Transcription Factor ◽  
Diphenyl Tetrazolium Bromide

Carbon enriched bioceramic (C-Bio) scaffolds have recently shown exceptional results in terms of their biological and mechanical properties. The present study aims at assessing the ability of the C-Bio scaffolds to affect the commitment of canine adipose-derived mesenchymal stem cells (cAD-MSCs) and investigating the influence of carbon on cell proliferation and osteogenic differentiation of cAD-MSCs in vitro. The commitment of cAD-MSCs to an osteoblastic phenotype has been evaluated by expression of several osteogenic markers using real-time PCR. Biocompatibility analyses through 3-(4,5-dimethyl- thiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT), lactate dehydrogenase (LDH) activity, hemolysis assay, and Ames test demonstrated excellent biocompatibility of both materials. A significant increase in the extracellular alkaline phosphatase (ALP) activity and expression of runt-related transcription factor (RUNX), ALP, osterix (OSX), and receptor activator of nuclear factor kappa-Β ligand (RANKL) genes was observed in C-Bio scaffolds compared to those without carbon (Bio). Scanning electron microscopy (SEM) demonstrated excellent cell attachment on both material surfaces; however, the cellular layer on C-Bio fibers exhibited an apparent secretome activity. Based on our findings, graphene can improve cell adhesion, growth, and osteogenic differentiation of cAD-MSCs in vitro. This study proposed carbon as an additive for a novel three-dimensional (3D)-printable biocompatible scaffold which could become the key structural material for bone tissue reconstruction.

Bioactive Composite Materials for Bone Tissue Applications

2006 ◽  
Vol 514-516 ◽  
pp. 985-989
Author(s):  
B.J.M. Leite Ferreira ◽  
M.G.G.M. Duarte ◽  
M. Helena Gil ◽  
Rui N. Correia ◽  
J. Román ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Bone Tissue ◽  
Tissue Repair ◽  
Body Fluid ◽  
In Vitro Bioactivity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Biodegradable Composite ◽  
Scanning Electron

Two materials with potential application in bone tissue repair have been developed: 1) a non-biodegradable composite based in a new methacrylic-co-acrylic matrix; and 2) a biodegradable composite based in a chitosan (Ch) matrix. Both matrices were reinforced with glass-ceramic particles of composition (mol%) 70 SiO2 – 30 CaO. The in vitro bioactivity of composites was assessed by soaking in simulated body fluid (SBF) for periods of up to 7 days at 37º C. X-ray diffraction (XRD) and scanning electron microscopy coupled with X-ray energy dispersive spectroscopy (SEM-EDS) were used for deposit identification after different soaking periods. Calcium phosphate particulate deposits were detected after 3 days of immersion, followed by growth and maturation towards apatite.

PCL and PCL/PLA Scaffolds for Bone Tissue Regeneration

2013 ◽  
Vol 683 ◽  
pp. 168-171 ◽  
Author(s):  
Tatiana Patrício ◽  
Antonio Gloria ◽  
Paulo J. Bártolo
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Cell Attachment ◽  
Bone Tissue Regeneration ◽  
Engineering Applications ◽  
Printing System

This paper investigates the use of PCL and PCL/PLA scaffolds, produced using a novel additive biomanufacturing system called BioCell Printing, for bone tissue engineering applications. Results show that the BioCell Printing system produces scaffolds with regular and reproducible architecture, presenting no toxicity and enhancing cell attachment and proliferation. It was also possible to observe that the addition of PLA to PCL scaffolds strongly improves the biomechanical performance of the constructs.

Transformed Cuttlefish Bone Scaffolds for Bone Tissue Engineering

2010 ◽  
Vol 89-91 ◽  
pp. 47-52 ◽  
Author(s):  
Elisa Battistella ◽  
Silvia Mele ◽  
S. Pietronave ◽  
Ismaela Foltran ◽  
G.I. Lesci ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Engineering Application ◽  
Surface Characteristics ◽  
Bone Tissue Regeneration ◽  
Tissue Engineering Application ◽  
Bone Scaffolds ◽  
Surface Development

Nature is full of many interesting things to work with, but many natural resources are also protected. In this view the recycling of aquaculture and fishery residues may lead to the manufacture of new devices and the isolation of new molecules with potential application in medicine. The aim of the present study was to explore the possibility to transform the cuttlefish bone into an hydroxyapatite scaffold suitable for bone tissue engineering application. The mixture of different lamellar porous structure of cuttlefish bone from the species Sepia Officinalis was selected and characterized, according to morphology (including porosity, surface development, surface characteristics) and mechanical properties. The material was transformed into suitable scaffold for bone tissue regeneration, trying to totally or partially convert calcium carbonate (aragonite) into calcium phosphate (hydroxyapatite HA) using hydrothermal transformation. The studies on cell attachment and proliferation (by MTT assay at different experimental times), cell morphology with Scanning Electron Microscopy (SEM), alkaline phosphatase (ALP) and osteocalcin (OC) activities and expressions by mouse osteoblast-like MC3T3-E1 cells on HA were investigated at different experimental times in cultures, in comparison with those observed on titanium specimens used as a control (ET and ST). Cell proliferation was less in HA transformed cuttlefish bone scaffolds than in ET and ST specimens. In contrast, good performance for osteoblasts differentiation was observed on HA transformed cuttlefish bone scaffolds, similar to those observed onto titanium scaffolds.

scholarly journals Preparation and Evaluation of Biocompatible Composite for Bone Tissue Engineering

2017 ◽  
Vol 4 (3) ◽  
pp. 7-14
Author(s):  
Masud Rana Md. ◽  
Naznin Akhtar ◽  
Zahid Hasan Md. ◽  
Asaduzzaman S M
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biomedical Application ◽  
Bone Tissue Regeneration ◽  
Precipitation Method ◽  
Tissue Engineering Scaffolds ◽  
Fixed Amount ◽  
Co Precipitation

Bone tissue engineering with cells and synthetic extracellular matrix represents a new approach for the regeneration of mineralized tissue compared with the transplantation of bone. Hydroxyapatite (HA) and its composite with biopolymer are extensively developed and applied in bone tissue regeneration. The main aim of this study was to fabricate and characterize of HA apatite based biocompatible scaffold for bone tissue engineering. Scaffolds with different ratio of polymers (chitosan & alginate), and fixed amount of synthetic HA were prepared using in situ co precipitation method and mineral to polymer ratio was 1:1 to 1: 2 . A cross linker agent, 2-Hydroxylmethacrylate (HEMA) was added at different percentage (0.5-2%) into the selected composition and irradiated at 5- 25 kGy to optimize the proper mixing of components at the presence of HEMA. Fabricated scaffolds were analyzed to determine porosity, density, biodegradability, morphology and structural properties. Porosity and density of the prepared scaffold were 75 to 92% and 0.21 to 0.42 g/cm3 respectively. However, the swelling ratio of the fabricated scaffolds was ranged from 133 to 197%. Nonetheless, there had a reasonable in-vitro degradation of prepared scaffolds. Flourier transform infrared spectroscopy (FTIR) analysis showed intermolecular interaction between components in the scaffold. Pore size of scaffold was measured by scanning electron microscope and the value was 162-510 μm. It could be proposed that this scaffold fulfills all the main requirements to be considered as a bone substitute for biomedical application in near future.

scholarly journals Natural and Synthetic Polymers for Bone Scaffolds Optimization

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 905 ◽  
Author(s):  
Francesca Donnaloja ◽  
Emanuela Jacchetti ◽  
Monica Soncini ◽  
Manuela T. Raimondi
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Bone Cells ◽  
The Body ◽  
Bone Tissue Regeneration ◽  
In Vivo Models ◽  
Polymeric Scaffold ◽  
Technology Improvement

Bone tissue is the structural component of the body, which allows locomotion, protects vital internal organs, and provides the maintenance of mineral homeostasis. Several bone-related pathologies generate critical-size bone defects that our organism is not able to heal spontaneously and require a therapeutic action. Conventional therapies span from pharmacological to interventional methodologies, all of them characterized by several drawbacks. To circumvent these effects, tissue engineering and regenerative medicine are innovative and promising approaches that exploit the capability of bone progenitors, especially mesenchymal stem cells, to differentiate into functional bone cells. So far, several materials have been tested in order to guarantee the specific requirements for bone tissue regeneration, ranging from the material biocompatibility to the ideal 3D bone-like architectural structure. In this review, we analyse the state-of-the-art of the most widespread polymeric scaffold materials and their application in in vitro and in vivo models, in order to evaluate their usability in the field of bone tissue engineering. Here, we will present several adopted strategies in scaffold production, from the different combination of materials, to chemical factor inclusion, embedding of cells, and manufacturing technology improvement.

scholarly journals Engineering of Chitosan-Hydroxyapatite-Magnetite Hierarchical Scaffolds for Guided Bone Growth

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2321 ◽  
Author(s):  
Pistone ◽  
Celesti ◽  
Piperopoulos ◽  
Ashok ◽  
Cembran ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Bone Growth ◽  
Cell Attachment ◽  
X Ray Diffraction ◽  
Culture Studies ◽  
X Ray ◽  
Support Cell ◽  
Chitosan Matrix

Bioabsorbable materials have received increasing attention as innovative systems for the development of osteoconductive biomaterials for bone tissue engineering. In this paper, chitosan-based composites were synthesized adding hydroxyapatite and/or magnetite in a chitosan matrix by in situ precipitation technique. Composites were characterized by optical and electron microscopy, thermogravimetric analyses (TGA), x-ray diffraction (XRD), and in vitro cell culture studies. Hydroxyapatite and magnetite were found to be homogeneously dispersed in the chitosan matrix and the composites showed superior biocompatibility and the ability to support cell attachment and proliferation; in particular, the chitosan/hydroxyapatite/magnetite composite (CS/HA/MGN) demonstrated superior bioactivity with respect to pure chitosan (CS) and to the chitosan/hydroxyapatite (CS/HA) scaffolds

Biological evaluation of micro-patterned hyaluronic acid hydrogel for bone tissue engineering

2014 ◽  
Vol 86 (12) ◽  
pp. 1911-1922 ◽  
Author(s):  
Hyo Seung Park ◽  
Su Yeon Lee ◽  
Hyunsik Yoon ◽  
Insup Noh
Keyword(s):  
Tissue Engineering ◽  
Hyaluronic Acid ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Cells ◽  
Cell Attachment ◽  
Biological Properties ◽  
Biological Evaluation ◽  
Micro Patterning

Abstract Design of micro-patterning of hydrogel is of critical importance in both understanding cellular behaviors and mimicking controlled microenvironments and architectures of diverse well-organized tissues. After micro-patterning of hyaluronic acid (HA) hydrogel on a poly(dimethyl siloxane) substrate, its physical and biological properties have been compared with those of a non-patterned hydrogel for its possible applications in bone tissue engineering. The micro-patterned morphologies of HA hydrogel in both swollen and dehydrated forms have been observed with light microscope and scanning electron microscope, respectively, before and after in vitro cell culture. When MC3T3 bone cells were in vitro cultured on both HA hydrogels, the micro-patterned one shows excellence in cell proliferation and lining for 7 days along the micro-pattern paths over those of the non-patterned one, which have shown less cell-adhesiveness. The cytotoxicity of the micro-patterned HA hydrogels was in vitro evaluated by the assays of MTT, BrdU and Neutral red. The viability and morphology of MC3T3 cells on both HA hydrogels were observed with a fluorescence microscope by the live & dead assay, where their viability was confirmed by staining of F-actin development. The results of their H&E staining showed that both micro-patterned and non-patterned hydrogels induced development of tissue regeneration as observed by cell attachment, proliferation, and survivability, but the micro-patterned one induced distinctive patterning of both better initial cells adhesion on the micro-patterns and subsequently development of their proliferation and extracellular matrix, which were considered as important characteristics in their applications to tissue engineering.

scholarly journals Development and Characterization of Cellulose/Iron Acetate Nanofibers for Bone Tissue Engineering Applications

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1339
Author(s):  
Hamouda M. Mousa ◽  
Kamal Hany Hussein ◽  
Mostafa M. Sayed ◽  
Mohamed K. Abd El-Rahman ◽  
Heung-Myong Woo
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Photoelectron Spectroscopy ◽  
Cell Attachment ◽  
Future Application ◽  
Apatite Formation ◽  
Gravimetric Analysis ◽  
Engineering Applications ◽  
X Ray

In tissue engineering, design of biomaterial with a micro/nano structure is an essential step to mimic extracellular matrix (ECM) and to enhance biomineralization as well as cell biocompatibility. Composite polymeric nanofiber with iron particles/ions has an important role in biomineralization and collagen synthesis for bone tissue engineering. Herein, we report development of polymeric cellulose acetate (CA) nanofibers (17 wt.%) and traces of iron acetates salt (0.5 wt.%) within a polymeric solution to form electrospinning nanofibers mats with iron nanoparticles for bone tissue engineering applications. The resulting mats were characterized using field emission scanning electron microscopy (FESEM), transmission electron microscope (TEM), Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The resulted morphology indicated that the average diameter of CA decreased after addition of iron from (395 ± 30) to (266 ± 19) nm and had dense fiber distributions that match those of native ECM. Moreover, addition of iron acetate to CA solution resulted in mats that are thermally stable. The initial decomposition temperature was 300 °C of CA/Fe mat > 270 °C of pure CA. Furthermore, a superior apatite formation resulted in a biomineralization test after 3 days of immersion in stimulated environmental condition. In vitro cell culture experiments demonstrated that the CA/Fe mat was biocompatible to human fetal-osteoblast cells (hFOB) with the ability to support the cell attachment and proliferation. These findings suggest that doping traces of iron acetate has a promising role in composite mats designed for bone tissue engineering as simple and economically nanoscale materials. Furthermore, these biomaterials can be used in a potential future application such as drug delivery, cancer treatment, and antibacterial materials.

Sign in / Sign up

Export Citation Format

Share Document