Smart Sensor Using Cellulose-Based Material for TNT Detection

2019 ◽  
Vol 803 ◽  
pp. 124-128 ◽  
Author(s):  
Natthaya Siangdee ◽  
Napaporn Youngvises
Keyword(s):  
Potassium Hydroxide ◽  
Limit Of Detection ◽  
Smart Sensor ◽  
Color Intensity ◽  
Cotton Swab ◽  
Naked Eye ◽  
Red Color ◽  
Relative Standard ◽  
Precision And Accuracy ◽  
Tnt Detection

A smart sensor with cellulose-based material was developed for the detection of 2,4,6-trinitrotoluene (TNT), using potassium hydroxide/ethanol reagent adsorbed onto a cellulose cotton swab. A red color was observed immediately after exposure to TNT. The sensor allowed rapid qualitative and semi-quantitative analysis of TNT by naked-eye, observation at TNT amounts > 2 μg. To improve precision and accuracy, a smartphone was used to capture digital images of the color. A calibration curve was constructed between log TNT (μg) vs. color intensity, and was linear in the range 1-30 μg-TNT with R2= 0.9975. The limit of detection (3.3σ/slope) was 0.11 μg-TNT and percentage relative standard deviation (%RSD, n=10) was 2.30. The sensor was used to detect the TNT samples of soil and from non-porous and porous surfaces.

scholarly journals Estimating Diphenylamine in Gunshot Residues from a New Tool for Identifying both Inorganic and Organic Residues in the Same Sample

Separations ◽  
2019 ◽  
Vol 6 (1) ◽  
pp. 16 ◽  
Author(s):  
Ana Argente-García ◽  
Lusine Hakobyan ◽  
Carmen Guillem ◽  
Pilar Campíns-Falcó
Keyword(s):  
Limit Of Detection ◽  
Solid Phase ◽  
High Sensitivity ◽  
Capillary Liquid Chromatography ◽  
Organic Residues ◽  
Cotton Swab ◽  
Gunshot Residues ◽  
Relative Standard ◽  
On Line ◽  
Inorganic And Organic

A method involving the collection and determination of organic and inorganic gunshot residues on hands using on-line in-tube solid-phase microextraction (IT-SPME) coupled to miniaturized capillary liquid chromatography with diode array detection (CapLC-DAD) and scanning electron microscopy coupled to energy dispersion X-ray (SEM-EDX), respectively, for quantifying both residues was developed. The best extraction efficiency for diphenylamine (DPA) as the main target among organic residues was achieved by using a dry cotton swab followed by vortex-assisted extraction with water, which permits preservation of inorganic residues. Factors such as the nature and length of the IT-SPME extractive phase and volume of the sample processed were investigated and optimized to achieve high sensitivity: 90 cm of TRB-35 (35% diphenyl, 65% polydimethylsiloxane) capillary column and 1.8 mL of the processed sample were selected for the IT-SPME. Satisfactory limit of detection of the method for analysis of DPA deposited on shooters’ hands (0.3 ng) and precision (intra-day relative standard deviation, 9%) were obtained. The utility of the described approach was tested by analyzing several samples of shooters’ hands. Diphenylamine was found in 81% of the samples analyzed. Inorganic gunshot residues analyzed by SEM-EDX were also studied in cotton swab and lift tape kit samplers. Optical microscopy was used to see the inorganic gunshot residues in the cotton swab samplers. The lift tape kits provided lesser sensitivity for DPA than dry cotton swabs—around fourteen times. The possibility of environmental and occupational sources could be eliminated when DPA was found together with inorganic residues. Then, the presence of inorganic and organic residues in a given sample could be used as evidence in judicial proceedings in the forensic field.

scholarly journals Ultraviolet Spectrophotometric Method for Determination of Glipizide in Presence of Liposomal/Proliposomal Turbidity

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Neelkant Prasad ◽  
Roshan Issarani ◽  
Badri Prakash Nagori
Keyword(s):  
Spectrophotometric Method ◽  
Calibration Curve ◽  
Limit Of Detection ◽  
Quantitative Estimation ◽  
Uv Detection ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Precision And Accuracy ◽  
Clear Solution

A simple and sensitive ultraviolet spectrophotometric method for quantitative estimation of glipizide in presence of lipid turbidity is described to avoid false estimation due to diffraction by turbidity. UV detection was performed at 230 nm, 225 nm, and 235 nm, and the calibration curve was plotted between resultant of absorbance of [230 nm − (225 nm + 235 nm)/2] and concentration of analyte. The calibration curve was linear over the concentration range tested (1–20 μg/mL) with limit of detection of 0.27 μg/mL and limit of quantification of 0.82 μg/mL. Percent relative standard deviations and percent relative mean error, representing precision and accuracy, respectively, for clear as well as turbid solutions, were found to be within acceptable limits, that is, always less than 0.69 and 0.41, respectively, for clear solution and 0.65 and 0.47, respectively, for turbid solution. Conclusively, our method was successfully applied for the determination of glipizide in clear as well as turbid solutions, and it was found that the drug analyte in both types of solutions can be detected from the same calibration curve accurately and precisely and glipizide entrapped in the liposomes or in proliposomal matrix was not detected.

scholarly journals SPECTROPHOTOMETRIC DETERMINATION OF CEFPIROME IN PHARMACEUTICAL PREPARATION

2020 ◽  
pp. 124-127
Author(s):  
DILIP M CHAFLE
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Preparation ◽  
Effect Of Temperature ◽  
Percentage Error ◽  
Ferric Nitrate ◽  
Red Color ◽  
Relative Standard

Objective: A simple, sensitive and precise visible spectrophotometric method has been proposed for the determination of cefpirome (CFM) in pure and oral injectable dosage form. Methods: A spectrophotometric method is based on the formation of stable red color product by oxidation of drugs by ferric nitrate and subsequent complexation with 1, 10 – phenanthroline with maximum absorption at 515 nm. Result: The red color complex was formed between Fe (II) and 1, 10 – phenanthroline after reduction of Fe (III) to Fe (II) in the presence of CFM drug. The phosphoric acid solution was used only for quenching the complex formation reaction. Several parameters such as the maximum wavelength of absorption, the volume of reagents, sequence of addition and effect of temperature and time of heating were optimized to achieve high sensitivity, stability and reproducible results. Under the optimum conditions, linear relationship with good correlation coefficient (0.994) was found over the concentration range from 0.20 to 6.00 μg/mL with a molar extinction coefficient 7.7813 × 104 L/mol/cm, limit of detection 0.2026 and limit of quantification 0.6141 μg/mL, respectively. Conclusion: The proposed method was evaluated statistically for linearity, accuracy, and precision in terms of standard deviation, percentage recovery, percentage error and relative standard deviation. The proposed method can be applied for the routine estimation of CFM in the laboratory.

scholarly journals DEVELOPMENT AND VALIDATION OF CARBAMAZEPINE PLASMA CONCENTRATIONS MEASUREMENT AND ITS APPLICATION ON EPILEPSY PATIENTS

2017 ◽  
Vol 9 (9) ◽  
pp. 87 ◽  
Author(s):  
Astri Budikayanti ◽  
Chiswyta Chaliana ◽  
Melva Louisa ◽  
Rianto Setiabudy
Keyword(s):  
Lower Limit ◽  
High Performance ◽  
Limit Of Detection ◽  
Plasma Concentrations ◽  
Internal Standard ◽  
Hplc Method ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Precision And Accuracy ◽  
Development And Validation

Objective: To develop and validate high-performance liquid chromatography with photodiode array (HPLC-PDA) detector as a method for measuring carbamazepine plasma concentrations in epilepsy patients treated with monotherapy or polytherapy.Methods: Carbamazepine was extracted from epilepsy patients’ plasma through liquid-liquid extraction, using protein precipitation with chloroform. Analysis was performed using HPLC with Inertsil DS-4 C18 (4.6x150 mm), 5 μm particle size column. The optimal condition for separation was established in a mobile phase consisting of acetonitrile: water (50:50) at a flow rate of 1.0 ml/min, detected by PDA detector at 220 nm. Propylparaben was used as the internal standard. The retention time was 3.5 min.Results: Linearity was obtained over a concentration range of 0.5-16 μg/ml with r = 0.999. The method showed good intra-and inter-day precision and accuracy of more than 90% difference (% diff) and 95% relative standard deviation (RSD). Lower limit of quantification (LOQ) was 0.5 μg/ml and lower limit of detection (LOD) was 0.2 μg/ml with 100% accuracy and more than 90% precision. Recovery test was nearly 100%. Stability of carbamazepine plasma concentration in 3 epilepsy patients was measured on the first and third month of treatment, ranging between 83.5 to 98.7%. When used to compare carbamazepine as a monotherapy versus polytherapy, the method showed good selectivity.Conclusion: The present HPLC method was valid for measuring carbamazepine plasma concentrations in epilepsy patients treated with monotherapy or polytherapy. This method meets the standard in the EMEA guideline in terms of linearity, precision, and accuracy, also selectivity in epilepsy patients treated with polytherapy.

Determination of Pentachlorophenol and Sodium Pentachlorophenolate in Fishery Products by Acetic Anhydride Derivatization/GC/μ-ECD

2012 ◽  
Vol 554-556 ◽  
pp. 1470-1474
Author(s):  
Yong Fu Shi ◽  
Wen Qin Liu ◽  
Dong Mei Huang ◽  
Xuan Yun Huang ◽  
Hui Juan Yu ◽  
...  
Keyword(s):  
Acetic Anhydride ◽  
Potassium Hydroxide ◽  
Limit Of Detection ◽  
Potassium Hydroxide Solution ◽  
Acylation Reaction ◽  
Sample Matrix ◽  
Relative Standard ◽  
Derivatizing Reagent ◽  
Fishery Products

A method was estimated to detect pentachlorophenol and sodium pentachlorophenolate in fishery products by gas chromatography with μ-ECD detector. Procedures of the method included extraction, alkaline stripping and derivatization. The pH of sample matrix was modified to 3-4 by nitric acid solution(nitric acid:water 1:1). Target compounds were extracted by hexane first and 0.2mol/L potassium hydroxide solution was used as stripping reagent to isolate pentachlorophenol from hexane. Acetic anhydride was taken as derivatizing reagent to convert target compounds into nonpolar ester compounds according to acylation reaction. Derivatized compound was extracted by hexane for the analysis of GC. The limit of detection is 2µg/kg . The average recoveries ranged from 73.01 to 104.68% spiked at 2.0,4.0,10.0µg/kg. And the relative standard deviations ranged from1.5 to 8.3%. The method can be used for the determination of pentachlorophenol and sodium pentachlorophenolate in fishery products,and it provides an rapid and acute method for food safety determination.

Calcium/Copper alginate framework doped with CuO nano-particles as a novel adsorbent for micro-extraction of benzodiazepines from human serum

2020 ◽  
Vol 16 ◽  
Author(s):  
Nadereh Rahbar ◽  
Fatemeh Ahmadi ◽  
Zahra Ramezani ◽  
Masoumeh Nourani
Keyword(s):  
Human Serum ◽  
High Performance ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Nano Particles ◽  
Limit Of Quantification ◽  
Analytical Methodology ◽  
Fiber Fabrication ◽  
Relative Standard ◽  
Green Procedure

Background: Sample preparation is one of the most challenging phases in pharmaceutical analysis, especially in biological matrices, affecting the whole analytical methodology. Objective: In this study, a new Ca(II)/Cu(II)/alginate/CuO nanoparticles hydrogel fiber (CCACHF) was synthesized through a simple, green procedure and applied for fiber micro solid phase extraction (FMSPE) of diazepam (DIZ) and oxazepam (OXZ) as model drugs prior to high-performance liquid chromatography-UV detection (HPLC-UV). Methods: Composition and morphology of the prepared fiber were characterized and the effect of main parameters on the fiber fabrication and extraction efficiency have been studied and optimized. Results: In optimal conditions, calibration curves were linear ranging between 0.1–500 µg L−1 with regression coefficients of 0.9938 and 0.9968. Limit of detection (LOD) (S/N=3) and limit of quantification (LOQ) (S/N=10) of the technique for DIZ and OXZ were 0.03 to 0.1 µg L−1. Within-day and between-day relative standard deviations (RSDs) for DIZ and OXZ were 6.0–12.5% and 3.3–9.4%, respectively. Conclusion: The fabricated adsorbent has been substantially employed to extraction of selected benzo-diazepines (BZDs) from human serum real specimens and the obtained recoveries were also satisfactory (82.1-109.7%).

scholarly journals Stability-indicating HPLC-DAD assay for simultaneous quantification of hydrocortisone 21 acetate, dexamethasone, and fluocinolone acetonide in cosmetics

2020 ◽  
Vol 18 (1) ◽  
pp. 962-973
Author(s):  
Saira Arif ◽  
Sadia Ata
Keyword(s):  
Mobile Phase ◽  
Limit Of Detection ◽  
Fluocinolone Acetonide ◽  
Internal Diameter ◽  
Forced Degradation ◽  
Specific Method ◽  
Regression Equations ◽  
Limit Of Quantification ◽  
Simultaneous Quantification ◽  
Relative Standard

AbstractA rapid and specific method was developed for simultaneous quantification of hydrocortisone 21 acetate (HCA), dexamethasone (DEX), and fluocinolone acetonide (FCA) in whitening cream formulations using reversed-phase high-performance liquid chromatography. The effect of the composition of the mobile phase, analysis temperature, and detection wavelength was investigated to optimize the separation of studied components. The analytes were finally well separated using ACE Excel 2, C18 AR column having 150 mm length, 3 mm internal diameter, and 2 µm particle size at 35°C using methanol with 1% formic acid and double-distilled deionized water in the ratio of 60:40 (v/v), respectively, as the mobile phase in isocratic mode. Ten microliters of sample were injected with a flow rate of 0.5 mL/min. The specificity, linearity, accuracy, precision, recovery, limit of detection (LOD), limit of quantification (LOQ), and robustness were determined to validate the method as per International Conference on Harmonization guidelines. All the analytes were simultaneously separated within 8 min, and observed retention times of HCA, DEX, and FCA were 4.5, 5.5, and 6.9 min, respectively. The proposed method showed good linearity with the correlation coefficient, R2 = 0.999 over the range of 1–150 µg/mL for all standards. The linear regression equations were y = 12.7x + 118.7 (r = 0.999) for HCA, y = 12.9x + 106.8 (r = 0.999) for DEX, and y = 12.9x + 96.8 (r = 0.999) for FCA. The LOD was 0.25, 0.20, and 0.08 µg/mL for HCA, FCA, and DEX and LOQ was 2.06, 1.83, and 1.55 µg/mL for HCA, FCA, and DEX, respectively. The recovery values of HCA, DEX, and FCA ranged from 100.7–101.3, 102.0–102.6, and 100.2–102.0%, respectively, and the relative standard deviation for precision (intra- and interday) was less than 2, which indicated repeatability and reproducibility. The novelty of the method was described by forced degradation experimentation of all analytes in the combined form under acidic, basic, oxidative, and thermal stress. The proposed method was found to be simple, rapid, and reliable for the simultaneous determination of HCA, DEX, and FCA in cosmetics.

scholarly journals A novel LC-MS method development and validation for the determination of phenyl vinyl sulfone in eletriptan hydrobromide

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Indhu Priya Mabbu ◽  
G. Sumathi ◽  
N. Devanna
Keyword(s):  
Method Development ◽  
Limit Of Detection ◽  
Vinyl Sulfone ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Pressure Chemical Ionization ◽  
Pressure Chemical ◽  
Development And Validation ◽  
Phenyl Vinyl

Abstract Background The aim of the present method is to develop and validate a specific, sensitive, precise, and accurate liquid chromatography-mass spectrometry (LC-MS) method for the estimation of the phenyl vinyl sulfone in the eletriptan hydrobromide. The effective separation of the phenyl vinyl sulfone was achieved by the Symmetry C18 (50 × 4.6 mm, 3.5 μm) column and a mobile phase composition of 0.1%v/v ammonia buffer to methanol (5:95 v/v), using 0.45 ml/min flow rate and 20 μl of injection volume, with methanol used as diluent. The phenyl vinyl sulfone was monitored on atomic pressure chemical ionization mode mass spectrometer with positive polarity mode. Results The retention time of phenyl vinyl sulfone was found at 2.13 min. The limit of detection (LOD) and limit of quantification (LOQ) were observed at 1.43 ppm and 4.77 ppm concentration respectively; the linear range was found in the concentration ranges from 4.77 to 27.00 ppm with regression coefficient of 0.9990 and accuracy in the range of 97.50–102.10%. The percentage relative standard deviation (% RSD) for six replicates said to be injections were less than 10%. Conclusion The proposed method was validated successfully as per ICH guidelines. Hence, this is employed for the determination of phenyl vinyl sulfone in the eletriptan hydrobromide.

scholarly journals A highly sensitive octopus-like azobenzene fluorescent probe for determination of abamectin B1 in apples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhenlong Guo ◽  
YiFei Su ◽  
Kexin Li ◽  
MengYi Tang ◽  
Qiang Li ◽  
...  
Keyword(s):  
Fluorescent Probe ◽  
Limit Of Detection ◽  
Quantitative Detection ◽  
Fluorescence Signal ◽  
Ionization Mass ◽  
Limit Of Quantification ◽  
Visible Absorption ◽  
Esi Ms ◽  
Relative Standard ◽  
Ft Ir

AbstractThe development of detecting residual level of abamectin B1 in apples is of great importance to public health. Herein, we synthesized a octopus-like azobenzene fluorescent probe 1,3,5-tris (5′-[(E)-(p-phenoxyazo) diazenyl)] benzene-1,3-dicarboxylic acid) benzene (TPB) for preliminary detection of abamectin B1 in apples. The TPB molecule has been characterized by ultraviolet–visible absorption spectrometry, 1H-nuclear magnetic resonance, fourier-transform infrared (FT-IR), electrospray ionization mass spectroscopy (ESI-MS) and fluorescent spectra. A proper determination condition was optimized, with limit of detection and limit of quantification of 1.3 µg L−1 and 4.4 μg L−1, respectively. The mechanism of this probe to identify abamectin B1 was illustrated in terms of undergoing aromatic nucleophilic substitution, by comparing fluorescence changes, FT-IR and ESI-MS. Furthermore, a facile quantitative detection of the residual abamectin B1 in apples was achieved. Good reproducibility was present based on relative standard deviation of 2.2%. Six carboxyl recognition sites, three azo groups and unique fluorescence signal towards abamectin B1 of this fluorescent probe demonstrated reasonable sensitivity, specificity and selectivity. The results indicate that the octopus-like azobenzene fluorescent probe can be expected to be reliable for evaluating abamectin B1 in agricultural foods.

scholarly journals Picomolar-Level Melamine Detection via ATP Regulated CeO2 Nanorods Tunable Peroxidase-Like Nanozyme-Activity-Based Colorimetric Sensor: Logic Gate Implementation and Real Sample Analysis

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 178
Author(s):  
Benazir Chishti ◽  
Zubaida A. Ansari ◽  
Hassan Fouad ◽  
Othman Y. Alothman ◽  
Mohamed Hashem ◽  
...  
Keyword(s):  
Linear Response ◽  
Limit Of Detection ◽  
Logic Gate ◽  
Colorimetric Sensor ◽  
Blue Color ◽  
Neutral Ph ◽  
Colorimetric Response ◽  
Relative Standard ◽  
Functional Logic ◽  
Gate Sensor

The capability of functional logic operations is highly intriguing, but far from being realized owing to limited recognition element (RE) and complex readout signals, which limit their applications. In this contribution, for a visual colorimetric sensor for melamine (MEL) we described the construction of two- and three-input AND logic gate by exploiting the intrinsic peroxidase (POD)-like activity of CeO2 nanorods (NRs) (~23.04% Ce3+ fraction and aspect ratio (RTEM) of 3.85 ± 0.18) as RE at acidic pH (4.5). Further ATP piloted catalytic tuning of POD-like activity in CeO2 NRs employed for a functional logic gate-controlled MEL sensing at neutral pH (7.4). AND logic circuit operated MEL sensing record colorimetric response time of 15 min to produce blue color proportionate to MEL concentration. The fabricated nanozyme (CeO2)-based logic gate sensor probe for MEL at pH 4.5 showed a linear response from 0.004 nM to 1.56 nM with a limit of detection (LOD) of 4 pM; while translation from acidic to neutral pH (at 7.4) sensor exhibited linear response ranging from 0.2 nM to 3.12 nM with a LOD value of 17 pM. Through CeO2 POD-like nanozyme behavior under acidic and neutral pH, the fabricated logic gate sensor showed high affinity for MEL, generating prominent visual output with picomolar sensitivity, good reproducibility, and stability with relative standard deviation (RSD) <1% and 2%, respectively. A feasibility study in real samples (raw milk and milk powder) showed good recoveries with negligible matrix effect, an anti-interference experiment revealed sensor selectivity, highlighting robust sensor practical utility. With the merits of high sensitivity, specificity, low cost, and simplified sample processing, the developed logic-controlled colorimetric MEL sensing platform with appropriate modifications can be recognized as a potent methodology for on-site analysis of various food adulterants and related applications.

Sign in / Sign up

Export Citation Format

Share Document