Controlling the Stress State of the Coating during Plasma Spraying

2022 ◽  
Vol 1049 ◽  
pp. 144-151
Author(s):  
Oksana Timokhova ◽  
Dmitry Shakirzyanov ◽  
Roman Timokhov

Coatings obtained by spraying materials with a high-temperature gas jet onto a substrate followed by thermal treatment of the deposited materials (thermal gas coatings) are increasingly being used. The practical experience of using thermal spray coatings, accumulated over the past 20–30 years in industries, shows that in this way it is possible, as a rule, to reduce the wear of machine parts operating under various conditions by a factor of 2–5. The effectiveness of the technology has also been proven in the protection of products from corrosion and thermal damage. The efficiency of the applied materials is determined by their structure, which largely depends on the choice of the composition of the material, the method, and modes of application. A comprehensive solution to these issues with the study of the mechanism of the processes of formation of thermal gas coatings will create a scientific basis for the technology for its successful implementation in production. At the same time, the importance of studying the processes and optimizing the technological parameters of spraying and subsequent coating treatment increases. Optimization is carried out, as a rule, according to the results of experiments. Let us consider the study on the example of the development of wear-resistant composite coatings with solid lubricant inclusions with the substantiation of the technique and criteria for optimizing technological parameters taking into account the most important properties of sprayed protective coatings.

2018 ◽  
Vol 7 (2) ◽  
pp. 93-98
Author(s):  
Rakesh Goyal ◽  
Buta Singh Sidhu ◽  
Vikas Chawla

Thermal spraying coating techniques have emerged as very effective surface protection technology to apply protective coatings for corrosion and wear resistance applications. These coatings have gained more importance in recent past. Advances in powder and wire production have resulted in development of various types of surface coatings with excellent wear and corrosion resistance properties. Because of excellent mechanical, thermal and electrical properties of Carbon Nanotubes, CNTs reinforced composite coatings are being developed for various applications, e.g. automotive, aerospace and sports equipment industry. It is observed that if properly deposited, these CNTs ceramic composite coatings can provide improved properties like wear and corrosion resistance. It has been found that CNTs composite coatings can be successfully deposited by thermal spraying techniques, and these coatings provide better performance than conventional coatings. This paper reviews the performance of such coatings developed by various researchers.


1996 ◽  
Vol 8 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ken Bartley

This paper discusses the need for nationally based analytical models of the medieval period. The use of cluster analysis as a method for classifying demesne farms, by the crops they grew and their livestock management, is explained. Successful implementation of cluster analysis requires both the existence of a large base sample, to permit isolation of specific groupings within the data, and access to considerable processing time. The paper concludes by demonstrating how discriminant analysis can provide an efficient and systematic way of classifying even a single manor within a national frame of reference.


Author(s):  
Ramnik Kaur

E-governance is a paradigm shift over the traditional approaches in Public Administration which means rendering of government services and information to the public by using electronic means. In the past decades, service quality and responsiveness of the government towards the citizens were least important but with the approach of E-Government the government activities are now well dealt. This paper withdraws experiences from various studies from different countries and projects facing similar challenges which need to be consigned for the successful implementation of e-governance projects. Developing countries like India face poverty and illiteracy as a major obstacle in any form of development which makes it difficult for its government to provide e-services to its people conveniently and fast. It also suggests few suggestions to cope up with the challenges faced while implementing e-projects in India.


1996 ◽  
Vol 35 (2) ◽  
pp. 189-190
Author(s):  
Mir Annice Mahmood

This book, hereinafter referred to as the Guide, has been developed for those social analysts (e.g., anthropologists, sociologists, and human geographers) who have had little or no practical experience in applying their knowledge as development practitioners. In the past, development projects would be analysed from a narrow financial and economic perspective. But with the evolution of thinking on development, this narrow financial and economic aspect has now been broadened to include the impact on society as the very meaning of development has now come to symbolise social change. Thus, development is not restricted only to plans and figures; the human environment in its entirety is now considered for analysis while designing and implementing development projects.


2020 ◽  
Vol 1 (100) ◽  
pp. 77-82
Author(s):  
V.P. Kultenko ◽  
◽  
K.M. Mamchur ◽  

The article deals with the concept of flat Earth. There has a adherents and defenders in the modern world, despite the solid age of heliocentric teaching. Flat Earth apologists point out, that the evidence in favor of the scientific heliocentric theory is held on confidence. People should trust the testimony of astronauts, space exploration data, and more. However, the vast majority of people cannot verify this data from their own practical experience. If science is a criterion for truth, then the heliocentric concepts and flat Earth are far removed from this criterion. Moreover, in the cultural experience of the past we can find arguments in favor of the concept of a flat Earth. These testimonies are contained, in particular, in the Old Testament Bible, the sacred texts of Christianity and Judaism. The mythological and religious texts of other nations and cultures also refer to the idea of a flat Earth.


Author(s):  
Sabyasachi S. Roy ◽  
Mukul Kulshrestha

Indian Railways is the world’s largest government-owned monopoly, annually carrying passenger numbers that surpass the global population. It is world’s fourth largest rail network after the U.S.A., China, and Russia, and is managed by a separate Ministry of Railways. The operating ratios have consistently been around 90% in the past several years, indicating that that the capability to generate operational surplus is low. Further, its expenditure on staff and their pensions has been increasing. Consequently, capacity growth is increasingly being funded through borrowings, which threatens to further worsen the financial situation. Thus, railway services in India are often perceived as being inefficient and unsatisfactory. However, this perception of inefficient services has no scientific basis as mid- and micro-level efficiency analyses of Indian Railways have never been carried out. This paper adopts a data envelopment analysis (DEA)-based approach to evaluate the performance efficiencies of the 69 divisions of Indian Railways. Six models that deploy a range of performance indicators like operating expenditures, numbers of staff employed or passengers carried, freight carried, rail network length, and revenues generated have been employed to assess efficiencies. The results demonstrate the existence of significant inefficiencies that may possibly be attributed to lack of proper management, planning policies, and mis-governance, resulting in significant financial losses. The paper discusses these issues and the policy reforms needed in the developing country context, while suggesting some reforms that may lead to improved sector performances.


Author(s):  
Victor M. Hernández-Gantes

The dramatic growth of online education over the past two decades is requiring colleges to make a shift from fragmented approaches to program planning and implementation towards a framework integrating both into a coherent support system. This article provides an overview of an emerging holistic framework for planning and implementation of online programs calling for shared strategic planning needs assessment strategies, and establishing program consensus. Guided by a program vision, curriculum and instructional strategies are identified along with internal and external supports needed for successful implementation. The framework suggests demand-driven strategic planning, benchmarking approaches to implementation practices, and interactive feedback to ensure effective program planning and implementation.


1899 ◽  
Vol 45 (191) ◽  
pp. 713-724
Author(s):  
F. Ashby Elkins ◽  
Jas. Middlemass

We think it will be generally acknowledged that the problem which the treatment of noisy, destructive, and dirty patients sets to their medical officers is greatest as regards their management at night. It is then undoubtedly that noise, destructiveness, and dirty habits have the greatest chance of getting free play, and it is then that the efforts for reformation have to be greatest. If these efforts are successful considerably more than half the problem will have been solved. It is to this part of the question, viz. the supervision of such patients during the night, that we desire in this paper to direct attention. At the outset it may be stated that our proposals are not theoretical. They are the result of practical experience gained during the past four years in the Sunderland Asylum. The special arrangements we propose to describe were instituted by one of us at the opening of the institution four years ago. At first a few cases were dealt with tentatively, but, as the first results were so encouraging, the number of cases was gradually increased, until all the patients who were restless, noisy, destructive, or of dirty habits came without exception to be dealt with. The asylum, situated at Ryhope, is a small one, containing only 350 beds, and on this account, as well as because it was new, it was conveniently suited for such an experiment. It may be well before going further to describe the arrangements now in existence there. There are 175 beds for each sex, made up as follows:—45 single rooms, one fully padded, and 2 half-padded; 2 small dormitories of 7 each, 2 of 13 each, 2 of 19 each, and 2 of 26 each. In the last two there is a night attendant, and one also in one of the dormitories for 19, which is the hospital ward. There is, in addition, a head night attendant who visits the patients in these dormitories and also all the remaining patients every hour, or oftener when necessary. There are thus 4 of a night staff for 175 patients. Though this is probably a large proportion compared to most public asylums, it is not claimed as a new departure in asylum management, as we are aware that in a number of asylums the advantage of having a large night staff is fully realised and acted on. The essential feature of the arrangements at Ryhope, to which we wish to direct attention, is the selection of cases placed in dormitories under constant supervision. Of course, all epileptics and suicidal patients are placed there. But, in addition, all recent cases of whatever kind, all dirty and destructive cases, and those who sleep badly and are in consequence inclined to chatter or be noisy, are also placed under constant supervision. Looked at from the other side, all single rooms and dormitories not under constant supervision are reserved for quiet and well-behaved patients who do not require any special attention during the night. This plan has been found to work exceedingly well, and since it was organised we have never had occasion to think of adopting any other. Another testimony to its effectiveness is that those of the staff who have the actual supervision of the patients and have had experience in other asylums are unanimous in their opinion that the arrangement is a very decided improvement. This opinion, let it be observed, is not based on the ground that now their duties are lighter than they were, because, as a matter of fact, they are more onerous.


2015 ◽  
Author(s):  
Eric Lethe

The need for environmentally compliant processes and materials in the Painting Industry grows more pressing every day. As the need for these processes grows, so grows the confusion regarding the selection and implementation of these new methods and materials. In the past, price and traditional procedure were the only criteria by which a material was procured. Speed and compliance with Original Equipment Manufacturer specification governed how things were done on the shop floor. With the advent of the environmental regulations, processes are being examined all across the globe. In many of the larger companies, the chief environmental officer has as important a role as the comptroller or Chief Financial Officer. Environmental managers are often not chemists or line painters, and typically, the environmental manager is skilled only in the policies of waste disposal, spill clean up, or remediation. The methods whereby a company can minimize the generation of hazardous waste remain less familiar. Often the examination of possible alternate techniques and materials are left for the last minute, or are conducted by personnel who are unfamiliar with how to make changes work. This is usually a recipe for failure in the implementing of anything new. This paper will suggest methods for selection of alternative products and processes in a clear and organized manner. Salient discussion points will be: 1. Process Examination 2. Material Selection 3. Steps For Successful Implementation 4. Possible Impediments 5. How to Avoid Risky Alternatives It will focus on procedures that will assist in the decision making process, and hopefully be of use in the choosing of environmentally sound equipment, chemicals, and methodologies.


2018 ◽  
Vol 45 (8) ◽  
pp. 1174-1191 ◽  
Author(s):  
H. Daniel Butler ◽  
Starr Solomon ◽  
Ryan Spohn

A number of studies have identified “what works” in regard to the successful implementation of correctional programming over the past several decades. Few studies, however, have examined the complexities associated with programming in restrictive housing. Using data from a Midwestern department of corrections, we examined whether the provision of programming in restrictive housing achieved desired outcomes (e.g., reductions in inmate misconduct). The findings revealed the amount of time served in restrictive housing and confinement in different types of restrictive housing may influence estimations of a treatment effect. As a growing number of states seek to reform the use of restrictive housing, the proper implementation of cognitive-behavioral programming may increase institutional security and safety.


Sign in / Sign up

Export Citation Format

Share Document