Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester amide) Blends

2013 ◽  
Vol 745-746 ◽  
pp. 436-441
Author(s):  
Pei Liu ◽  
Long Chen ◽  
Jun Xu ◽  
Mei Fang Zhu ◽  
Zong Yi Qin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Tensile Elongation ◽  
High Dispersion ◽  
Melt Blending ◽  
Elongation At Break ◽  
Biodegradable Composites ◽  
Hyperbranched Poly ◽  
Blending Method ◽  
Fracture Morphologies

Biodegradable composites were prepared by adding hyperbranched poly (ester amide) (HBPs) into poly (3-hydroxybutyrate-co-3-hydrovalerate) (PHBV) through melt blending method. It was found that the tensile strength and toughness of PHBV were simultaneously enhanced by the addition of HBPs. Compared with neat PHBV, the tensile strength of the composite increased about 23% from 20.96 to 25.87 MPa for the content of 2.5 wt.% HBPs, and more remarkable enhancement in tensile elongation at break can be achieved by about 88% for 5 wt.% HBPs. The influences of HBPs on crystallization, thermal and fracture morphologies of PHBV were further evaluated by using differential scanning calorimeter and scanning electron microscope, respectively. The decrease in the crystallinity of PHBV and high dispersion of the HBPs in PHBV matrix were observed, which should contribute to the improvement on the mechanical properties of PHBV.

Preparation and characterizations of ternary biodegradable blends composed of polylactide, poly(ε-caprolactone), and wood flour

2012 ◽  
Vol 32 (6-7) ◽  
pp. 435-444 ◽  
Author(s):  
Hsin-Tzu Liao ◽  
Chin-San Wu
Keyword(s):  
Mechanical Properties ◽  
Weight Loss ◽  
Tensile Strength ◽  
Fourier Transform ◽  
Wood Flour ◽  
High Price ◽  
Infrared Analysis ◽  
Melt Blending ◽  
Ternary Blends ◽  
Elongation At Break

Abstract Melt blending of polylactide (PLA), poly(ε-caprolactone) (PCL), and wood flour (WF) was performed in an effort to overcome the major drawbacks (brittleness and high price) of PLA. In addition, the acrylic acid (AA)-grafted PLA70PCL30 (PLA70PCL30-g-AA) was used as the alternative for the preparation of ternary blends to improve the compatibility and the dispersability of WF within the PLA70PCL30 matrix. As expected, PCL improved the elongation at break and the toughness of PLA but decreased the tensile strength and modulus. Because the hydrophilic WF is dispersed physically in the hydrophobic PLA70PCL30 matrix, as the result of Fourier transform infrared analysis, the mechanical properties of PLA70PCL30 became noticeably worse when it was blended with WF. This problem was successfully conquered by using PLA70PCL30-g-AA to replace PLA70PCL30 due to the formation of an ester carbonyl group between PLA70PCL30-g-AA and WF. Furthermore, the PLA70PCL30-g-AA/WF blend provided a plateau tensile strength at break when the WF content was up to 50 wt%. PLA70PCL30/WF exhibited a tensile strength at break of approximately 3–25 MPa more than PLA70PCL30-g-AA/WF. By using p-cresol and tyrosinase, the enzymatic biodegradable test showed that PLA70PCL30-g-AA is somewhat more biodegradable than PLA70PCL30 because the former has better water absorption. After 16 weeks, the weight loss of the PLA70PCL30/WF (50 wt%) composite was >80%. PLA70PCL30-g-AA/WF exhibited a weight loss of approximately 1–12 wt% more than PLA70PCL30-g-AA/WF. It was also found that the addition of WF to PLA70PCL30 or PLA70PCL30-g-AA decreased the crystallinity of PLA and PCL in PLA70PCL30 or PLA70PCL30-g-AA and then increased their biodegradable property.

Studies on the Mechanical Properties of Foam CB-PVC Composite

2013 ◽  
Vol 681 ◽  
pp. 256-259
Author(s):  
Xiu Qi Liu ◽  
He Qin Xing ◽  
Li Li Zhao ◽  
Dan Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Mechanical Index ◽  
Melt Blending ◽  
Elongation At Break ◽  
Foam Composite ◽  
The Matrix ◽  
System Prototype ◽  
Made In

In our study, a new kind of foam composite was prepared by melt blending with PVC as the matrix and carbon black (CB) as the filler, the standard-spline was made in the dumbbell system prototype. Tensile strength and elongation at break were measured at 25°C。When the CB was added greater than 2.0%, with the increase of CB added, the determination of sample mechanical index began to decline, when the CB content was greater than 9%, tensile strength and elongation at break of the composites remained basically unchanged.

scholarly journals Fabrication and Characterization of Biodegradable Composites from Poly (Butylene Succinate-Co-Butylene Adipate) and Taihu Lake Blue Algae

2017 ◽  
Vol 26 (5) ◽  
pp. 096369351702600 ◽  
Author(s):  
Wenjing Xia ◽  
Nianqing Zhu ◽  
Zhongbin Ni ◽  
Mingqing Chen
Keyword(s):  
Tensile Strength ◽  
Taihu Lake ◽  
Mechanical Performance ◽  
Value Added ◽  
Melt Blending ◽  
Butylene Succinate ◽  
Elongation At Break ◽  
Biodegradable Composites ◽  
Thermal Stability Of

Biodegradable composites from poly (butylene succinate-co-butylene adipate) (PBSA) and Taihu Lake (Wuxi, China) blue algae were prepared by melt blending. The property and structure of biocomposites were investigated. By adding extra amount of water to blue algae, the formulated blue algae acted as a plastic in the composites during blending, and exhibited a reinforcing effect on the PBSA matrix. With increasing blue algae content, the thermal stability of the composites decreased; the tensile strength at break and elongation at break of the composites reduced, but the Young's modulus of the composites increased. However, the composite with 30% blue algae loading still exhibited good mechanical performance (tensile strength at break of 21.3 MPa, elongation at break of 180%). The fabrication of value-added PBSA/algae composites appeared as an effective approach to reduce the secondary environmental pollution of Taihu blue algae.

scholarly journals Simultaneous Improvement in the Tensile and Impact Strength of Polypropylene Reinforced by Graphene

2020 ◽  
Vol 2020 ◽  
pp. 1-5
Author(s):  
Li Juan
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Fracture Surface ◽  
Impact Strength ◽  
Melt Blending ◽  
Elongation At Break ◽  
Morphological Behavior ◽  
Scanning Electron

The nanocomposites of polypropylene (PP)/graphene were prepared by melt blending. The effects of the dosage of graphene on the flow and mechanical properties of the nanocomposites were investigated. The morphologies of fracture surfaces were characterized through scanning electron microscopy (SEM). The graphene simultaneous enhanced tensile and impact properties of nanocomposites. A 3.22% increase in tensile strength, 39.8% increase in elongation at break, and 26.7% increase in impact strength are achieved by addition of only 1 wt.% of graphene loading. The morphological behavior indicates the fracture surface of PP/graphene is more rough than that of pure PP.

Preparation and Characterization of GNP/TPU Composites

2014 ◽  
Vol 644-650 ◽  
pp. 4760-4762 ◽  
Author(s):  
Bao Feng Xu ◽  
Sheng Lai ◽  
Zhi Dan Lin ◽  
Jiang Ming Chen ◽  
Jun Lin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermoplastic Polyurethane ◽  
Graphene Nanoplatelets ◽  
Melt Blending ◽  
Frictional Properties ◽  
Blending Method ◽  
Properties Of Composites

Graphene nanoplatelets (GNP) and thermoplastic polyurethane (TPU) have been often used as filler and matrix, respectively, to produce composites. In this work, TPU/GNP composites were prepared via a melt blending method. The mechanical properties and frictional properties of TPU/GNP composites were investigated. Because the GNP is very expensive, we investigated to use graphite as the filler, to use PP-g-MAH as the compatibilizer and examined the characteristics of the prepared composites. Frictional properties and mechanical properties of GNP/TPU composites remarkably improve when adding PP-g-MAH as the compatibilizer. Tensile strength of composite containing 10wt % of GNP and 10wt% PP-g-MAH was measured as 25.5MPa. When the graphite was used to replace for GNP, the frictional properties of composites decreased, but the mechanical properties improved.

scholarly journals Biodegradable Composites with Functional Properties Containing Biopolymers

Catalysts ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 77
Author(s):  
Miroslawa Prochon ◽  
Szymon Szczepanik ◽  
Oleksandra Dzeikala ◽  
Robert Adamski
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Chemical Modification ◽  
Animal Origin ◽  
Plant Origin ◽  
Major Focus ◽  
Elongation At Break ◽  
Pig Skin ◽  
Biodegradable Composites

There is a major focus on natural biopolymers of bacterial, animal, or plant origin as ecological materials, replacing petrochemical products. Biologically derived polylactide (PLA), polyhydroxybutyrate (PHB), and polyhydroxyalkanoates (PHA) possess interesting properties, but they are currently too expensive for most applications. Therefore, researchers try to find other biopolymers that are both durable and cheap enough to replace plastics in some applications. One possible candidate is gelatin, which can be transformed into a thin, translucent film that is flexible and has stable and high mechanical properties. Here, we present a method of synthesizing a composite material from gelatin. For preparation of such material, we used gelatin of animal origin (pig skin) with the addition of casein, food gelatin, glycerin, and enzymes as biocatalysts of chemical modification and further extraction of gelatin from collagen. Compositions forming films with homogeneous shapes and good mechanical properties were selected (Tensile strength reaches 3.11 MPa, while the highest value of elongation at break is 97.96%). After administering the samples to microbial scaring, the composites completely decomposed under the action of microorganisms within 30 days, which proves their biodegradation.

Preparation and Property Study of PTT/CAB Blend Fibers

2014 ◽  
Vol 496-500 ◽  
pp. 384-387
Author(s):  
Li Yan Wang ◽  
Guang Li ◽  
Li Jun Yang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cellulose Acetate ◽  
Moisture Absorption ◽  
Melt Blending ◽  
Dye Uptake ◽  
Elongation At Break ◽  
Trimethylene Terephthalate ◽  
Absorption Percentage ◽  
Acetate Butyrate

Poly (trimethylene terephthalate) (PTT) /cellulose acetate butyrate (CAB) blend fibers were prepared through melt blending and spinning in this paper. The mechanical properties, dyeability, and hydroscopicity of PTT/CAB fibers were studied. The results indicated that the tensile strength of PTT / CAB blend fibers reduced slightly and the elongation at break increased with CAB content rising. And the dye uptake and moisture absorption percentage of PTT / CAB blend fibers increased as more CAB was added, i.e., in some degree, CAB added improved PTT fibers dyeability and hydroscopicity.

Study the Effect of the Addition of HAp from Crocodile Bones on the Mechanical Properties of PLA/HAp Composites

2013 ◽  
Vol 834-836 ◽  
pp. 237-240 ◽  
Author(s):  
Kanyakorn Pawarangkool ◽  
Wirunya Keawwattana
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Thermal Process ◽  
Weight Ratio ◽  
Melt Blending ◽  
Elongation At Break ◽  
X Ray ◽  
Infrared Spectrometer ◽  
Scanning Electron

In this work, hydroxyapatite (HAp) was produced from crocodile bones by thermal process at 900°C. X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FTIR) and Scanning electron microscope (SEM) were used to characterize the obtained HAp. Polylactic acid (PLA)/HAp composites were prepared by melt blending as follows: 95/5, 90/10 and 85/15 (weight ratio). The effect of the amount of HAp on the mechanical properties including tensile strength, modulus, elongation at break and impact strength of PLA/HAp composites was undertaken. It was found that tensile strength and elongation at break of the composites decreased with an increase of HAp content, while modulus and impact strength showed no significant effect.

Properties of Compatibilized SAN/NR Blends

2012 ◽  
Vol 488-489 ◽  
pp. 62-66
Author(s):  
Jareenuch Rojsatean ◽  
Supakij Suttireungwong ◽  
Manus Seadan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Electron Microscope ◽  
Maleic Anhydride ◽  
Impact Strength ◽  
Melt Blending ◽  
Elongation At Break ◽  
Reactive Agents ◽  
Internal Mixer ◽  
Scanning Electron

The blend of poly(styrene-co-acrylonitrile) (SAN) and natural rubber (NR) is immiscible and incompatible which lead to poor mechanical properties. Many methods can be carried out to improve the compatibility. In this work, the potential of various reactive compatibilizers in SAN and NR blend was explored. The morphological and mechanical properties were compared. The melt blending of SAN and NR were prepared in an internal mixer with various types of reactive agent such as styrene-co-maleic anhydride (SMA), maleic anhydride (MA), peroxide and mixed reactive agents. The morphological textures of the blends were investigated by scanning electron microscope. Mechanical properties including tensile strength, impact strength and elongation at break were measured. The results of morphological observations revealed that SAN/NR blend with reactive agent, the mixture of SMA and MA show the smallest and the most uniform dispersed NR particles, where the size of NR particle is about 1 µm. The mechanical properties of the blends revealed impact strength and elongation at break were increased with addition of reactive agents. SAN/NR blend with the mixture of SMA and MA showed the highest elongation at break but it had lower impact strength than the blend with SMA.

Physical and Mechanical Properties of Thermoplastic Natural Rubber (TPNR) Nanocomposites

2012 ◽  
Vol 576 ◽  
pp. 394-397 ◽  
Author(s):  
Noor Azlina Hassan ◽  
Hassan Norita ◽  
Sahrim Haji Ahmad ◽  
Rozaidi Rasid ◽  
Hazleen Anuar ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Maleic Anhydride ◽  
Natural Rubber ◽  
Physical And Mechanical Properties ◽  
Melt Blending ◽  
Mixing Parameters ◽  
Blending Method ◽  
Thermoplastic Natural Rubber ◽  
Internal Mixer

Thermoplastic natural rubber (TPNR) nanocomposites were prepared by melt blending method with the optimum mixing parameters (140oC, 100 rpm, 12 min) using internal mixer (Haake 600 P). The aim of this work is to study the effects of organo-montmorillonite (OMMT) on the physical and mechanical properties of TPNR with and without coupling agent (maleic anhydride grafted polyethylene, MA-PE). Significant improvement in tensile strength and modulus of TPNR nanocomposites were obtained with the presence of MA-PE.

Sign in / Sign up

Export Citation Format

Share Document