Analysis on Influence Factors of Greenhouse Gas Emissions of Magnesium Production Process

2016 ◽  
Vol 847 ◽  
pp. 321-327
Author(s):  
Yan Cui Cao ◽  
Feng Gao ◽  
Zhi Hong Wang ◽  
Xian Zheng Gong ◽  
Xiao Qing Li
Keyword(s):  
Energy Consumption ◽  
Production Process ◽  
Greenhouse Gas ◽  
Influence Factors ◽  
Ghg Emissions ◽  
Emission Factors ◽  
Energy Structure ◽  
Ghg Emission ◽  
Index Method ◽  
Magnesium Production

Magnesium is a promising lightweight and green metallic engineering material, but the environmental impact of primary magnesium production stage, especially greenhouse gas (GHG) emissions cannot be ignored. In this study, the life cycle energy consumption and GHG emissions caused by the production of primary magnesium in the years of 2003-2013 in China were calculated; the factor decomposition was conducted to analyze the GHG emissions of magnesium production process by using logarithmic mean Divisia index method (LMDI), including energy GHG emission factors, energy structure, energy consumption per ton of primary magnesium, production, emissions per unit of dolomite and ferrosilicon, and dolomite and ferrosilicon consumptions per ton of primary magnesium. The results showed that GHG emissions of primary magnesium production increased 260.29*104 t CO2eq in total from 2003 to 2013. The variety magnesium production contributed the biggest part of GHG emissions, accounting for 418.17%. The energy structure took second place on the contribution of GHG emissions, accounting for-161.49%. The nest part was energy consumption per ton of primary magnesium, accounting for-138.97%. While, the contribution of energy GHG emission factors, emissions per unit of dolomite and ferrosilicon, and dolomite and ferrosilicon consumptions per ton of primary magnesium was relatively small, which were 0.88%, 0.00% -2.72% -4.73% and-11.13%, respectively. Thus, it is the key methods to reduce GHG emissions by optimizing the energy structure and decreasing the energy consumption.

scholarly journals Energy Consumption and Greenhouse Gas Emissions During Ferromolybdenum Production

2020 ◽  
Vol 6 (1) ◽  
pp. 103-112
Author(s):  
Wenjing Wei ◽  
Peter B. Samuelsson ◽  
Anders Tilliander ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson
Keyword(s):  
Energy Consumption ◽  
Total Energy ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Copper Mining ◽  
Ghg Emission ◽  
Gas Emissions ◽  
Production Stages ◽  
Ore Grade

AbstractMolybdenum is mainly used as an alloy material in the iron and steel industry and typically in the form of ferromolybdenum (FeMo). The current study aims to evaluate the energy consumption and greenhouse gas emissions (GHG) of four ferromolybdenum production cases using inventory inputs from a process model based on mass and energy conservations. The total energy required for producing 1 tonne of FeMo can vary between 29.1 GJ/t FeMo and 188.6 GJ/t FeMo. Furthermore, the corresponding GHG emissions differ from 3.16 tCO2-eq/t FeMo to 14.79 tCO2-eq/t FeMo. The main variances are from the mining and beneficiation stages. The differences in these stages come from the beneficiation degree (ore grade) and the mine type (i.e., co-product from copper mining). Furthermore, the mine type has a larger impact on the total energy consumption and GHG emissions than the beneficiation degree. More specifically, FeMo produced as co-product from copper mining has a lower environmental impact measured as the energy consumption and GHG emission among all the four cases. The inventory, consumed energy or associated GHG emission is independent on the initial ore grade and mine type in the downstream production stages such as roasting and smelting. Also, transport has the least impact on the energy consumption and GHG emission among all production stages.

scholarly journals Minimizing greenhouse gas emissions of an industrial wastewater treatment plant in terms of water–energy nexus

2021 ◽  
Vol 11 (12) ◽  
Author(s):  
Pelin Yapıcıoğlu ◽  
Özlem Demir
Keyword(s):  
Wastewater Treatment ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
Flow Rate ◽  
Wastewater Treatment Plant ◽  
Industrial Wastewater ◽  
Ghg Emissions ◽  
Treatment Plant ◽  
Ghg Emission ◽  
Water Energy Nexus

AbstractIn this paper, (CO2) and methane (CH4) emissions of an industrial wastewater treatment plant were monitored. GHG emissions originated from treatment processes were considered as the direct emissions and determined using closed chamber method. GHG emission due to energy consumption was regarded as the indirect emissions. In the second stage of the study, it was aimed to reduce GHG emissions in terms of water–energy nexus. If the plant is operated under design conditions, energy consumption would be lower according to water–energy nexus. Also, the effect of design conditions on GHG emissions was investigated. Firstly, the correlation was defined between GHG emissions and operational parameters in terms of chemical oxygen demand (COD) and wastewater flow rate using Monte Carlo simulation. Then, design COD and wastewater flow rate were simulated to determine the possible GHG emission for each month. The simulation results show that minimization of GHG emissions might be possible if wastewater plant is operated under design conditions. The minimum greenhouse gas emission in the result of the simulation study is 8.25 kg CO2-eq/d if the plant is operated under design COD and flow rate. Total reduction in GHG emissions is approximately 30% if the plant is operated under design conditions.

scholarly journals Trade-offs between high yields and greenhouse gas emissions in irrigation wheat cropland in China

2014 ◽  
Vol 11 (8) ◽  
pp. 2287-2294 ◽  
Author(s):  
Z. L. Cui ◽  
L. Wu ◽  
Y. L. Ye ◽  
W. Q. Ma ◽  
X. P. Chen ◽  
...  
Keyword(s):  
Winter Wheat ◽  
Grain Yield ◽  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Triticum Aestivum L ◽  
Ghg Emission ◽  
Trade Off ◽  
Trade Offs ◽  
High Yields ◽  
Scientific Attention

Abstract. Although the concept of producing higher yields with reduced greenhouse gas (GHG) emissions is a goal that attracts increasing public and scientific attention, the trade-off between high yields and GHG emissions in intensive agricultural production is not well understood. Here, we hypothesize that there exists a mechanistic relationship between wheat grain yield and GHG emission, and that could be transformed into better agronomic management. A total 33 sites of on-farm experiments were investigated to evaluate the relationship between grain yield and GHG emissions using two systems (conventional practice, CP; high-yielding systems, HY) of intensive winter wheat (Triticum aestivum L.) in China. Furthermore, we discussed the potential to produce higher yields with lower GHG emissions based on a survey of 2938 farmers. Compared to the CP system, grain yield was 39% (2352 kg ha−1) higher in the HY system, while GHG emissions increased by only 10%, and GHG emission intensity was reduced by 21%. The current intensive winter wheat system with farmers' practice had a median yield and maximum GHG emission rate of 6050 kg ha−1 and 4783 kg CO2 eq ha−1, respectively; however, this system can be transformed to maintain yields while reducing GHG emissions by 26% (6077 kg ha−1, and 3555 kg CO2 eq ha−1). Further, the HY system was found to increase grain yield by 39% with a simultaneous reduction in GHG emissions by 18% (8429 kg ha−1, and 3905 kg CO2 eq ha−1, respectively). In the future, we suggest moving the trade-off relationships and calculations from grain yield and GHG emissions to new measures of productivity and environmental protection using innovative management technologies.

scholarly journals Energy Consumption and Greenhouse Gas Emissions of Nickel Products

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5664
Author(s):  
Wenjing Wei ◽  
Peter B. Samuelsson ◽  
Anders Tilliander ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Process Model ◽  
Ghg Emissions ◽  
Primary Energy ◽  
Nickel Metal ◽  
Gas Emissions ◽  
Nickel Smelting ◽  
Ore Grade

The primary energy consumption and greenhouse gas emissions from nickel smelting products have been assessed through case studies using a process model based on mass and energy balance. The required primary energy for producing nickel metal, nickel oxide, ferronickel, and nickel pig iron is 174 GJ/t alloy (174 GJ/t contained Ni), 369 GJ/t alloy (485 GJ/t contained Ni), 110 GJ/t alloy (309 GJ/t contained Ni), and 60 GJ/t alloy (598 GJ/t contained Ni), respectively. Furthermore, the associated GHG emissions are 14 tCO2-eq/t alloy (14 tCO2-eq/t contained Ni), 30 t CO2-eq/t alloy (40 t CO2-eq/t contained Ni), 6 t CO2-eq/t alloy (18 t CO2-eq/t contained Ni), and 7 t CO2-eq/t alloy (69 t CO2-eq/t contained Ni). A possible carbon emission reduction can be observed by comparing ore type, ore grade, and electricity source, as well as allocation strategy. The suggested process model overcomes the limitation of a conventional life cycle assessment study which considers the process as a ‘black box’ and allows for an identification of further possibilities to implement sustainable nickel production.

scholarly journals Renewable Energy and EU 2020 Target for Energy Efficiency in the Czech Republic and Slovakia

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 965 ◽  
Author(s):  
Jacek Brożyna ◽  
Wadim Strielkowski ◽  
Alena Fomina ◽  
Natalya Nikitina
Keyword(s):  
Economic Growth ◽  
Energy Efficiency ◽  
Renewable Energy ◽  
Czech Republic ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
Energy Policy ◽  
Ghg Emissions ◽  
The Czech Republic ◽  
The Eu

Our paper focuses on the renewable energy and EU 2020 target for energy efficiency in the Czech Republic and Slovakia. We study the reduction of greenhouse gas (GHG) emissions in these two EU Member States through the prism of the Europe 2020 strategy and the 3 × 20 climate and energy package and economic growth (represented by the Gross Domestic Product (GDP) that allows to measure the national dynamics and provide cross-country comparisons) without attributing specific attention to issues such as the electrification of transport or heating, and thence leaving them outside the scope of this paper. Both Czech Republic and Slovakia are two post-Communist countries that still face the consequences of economic transformation and struggle with the optimal management of natural resources. Both countries encountered profound system transformation after 1989 that are apparent in all three measures of sustainable development used in our study. We show that it is unlikely that the planned increase in renewable energy in the Czech Republic and Slovakia will reach its targets, but they might succeed in reducing their energy consumption and greenhouse gas emissions. Our findings show that the energy intensity of Czech and Slovak economies increased in the early 2000s and then stabilized at a level about twice of the EU average. It appears that this value is likely to remain the same in the forthcoming years. However, implementation of GHG emissions in the Czech Republic and Slovakia may be at risk in case the proper energy policy is not maintained. Moreover, our results show how the increase in the share of renewable energy and improvement in energy efficiency go hand-in-hand with mining and exploiting the energy sources that is notorious for the transition economies. We also demonstrate that a proper energy policy is required for effectively reducing energy consumption and greenhouse gas emissions. There is a need for commitments made by relevant stakeholders and policymakers targeted at achieving sustainable economic growth and energy efficiency. In addition, we demonstrate that there is a need for maintaining a proper balance between economic development and environmental protection, which is a must for the EU sustainable energy development agenda and all its accompanying targets for all its Member States.

scholarly journals Analyzing the Energy Consumption, GHG Emission, and Cost of Seawater Desalination in China

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 463 ◽  
Author(s):  
Xuexiu Jia ◽  
Jiří Klemeš ◽  
Petar Varbanov ◽  
Sharifah Wan Alwi
Keyword(s):  
Energy Consumption ◽  
Water Supply ◽  
Reverse Osmosis ◽  
Process Integration ◽  
Ghg Emissions ◽  
Water Desalination ◽  
Heat Integration ◽  
Seawater Desalination ◽  
Ghg Emission ◽  
Product Cost

Seawater desalination is considered a technique with high water supply potential and has become an emerging alternative for freshwater supply in China. The increase of the capacity also increases energy consumption and greenhouse gases (GHG) emissions, which has not been well investigated in studies. This study has analyzed the current development of seawater desalination in China, including the capacity, distribution, processes, as well as the desalted water use. Energy consumption and GHG emissions of overall desalination in China, as well as for the provinces, are calculated covering the period of 2006–2016. The unit product cost of seawater desalination plants specifying processes is also estimated. The results showed that 1) The installed capacity maintained increased from 2006 to 2016, and reverse osmosis is the major process used for seawater desalination in China. 2) The energy consumption increased from 81 MWh/y to 1,561 MWh/y during the 11 years. The overall GHG emission increase from 85 Mt CO2eq/y to 1,628 Mt CO2eq/y. Tianjin had the largest GHG emissions, following are Hebei and Shandong, with emissions of 4.1 Mt CO2eq/y, 2.2 Mt CO2eq/y. and 1.0 Mt CO2eq/y. 3) The unit product cost of seawater desalination is higher than other water supply alternatives, and it differentiates the desalination processes. The average unit product cost of the reverse osmosis process is 0.96 USD and 2.5 USD for the multiple-effect distillation process. The potential for future works should specify different energy forms, e.g. heat and power. Alternatives of process integration should be investigated—e.g. efficiency of using the energy, heat integration, and renewables in water desalination, as well as the utilization of total site heat integration.

scholarly journals Scenario Analysis for GHG Emission Reduction Potential of the Building Sector for New City in South Korea

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5514
Author(s):  
Seo-Hoon Kim ◽  
SungJin Lee ◽  
Seol-Yee Han ◽  
Jong-Hun Kim
Keyword(s):  
Climate Change ◽  
Energy Consumption ◽  
South Korea ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Building Energy ◽  
Building Sector ◽  
Ghg Reduction ◽  
New City

A new government report on climate change shows that global emissions of greenhouse gases have increased to very high levels despite various policies to reduce climate change. Building energy accounts for 40% of the world’s energy consumption and accounts for 33% of the world’s greenhouse gas emissions. This study applied the LEAP (Long-range energy alternatives planning) model and Bass diffusion method for predicting the total energy consumption and GHG (Greenhouse Gas) emissions from the residential and commercial building sector of Sejong City in South Korea. Then, using the Bass diffusion model, three scenarios were analyzed (REST: Renewable energy supply target, BES: Building energy saving, BEP: Building energy policy) for GHG reduction. The GHG emissions for Sejong City for 2015–2030 were analyzed, and the past and future GHG emissions of the city were predicted in a Business-as-Usual (BAU) scenario. In the REST scenario, the GHG emissions would attain a 24.5% reduction and, in the BES scenario, the GHG emissions would attain 12.81% reduction by 2030. Finally, the BEP scenario shows the potential for a 19.81% GHG reduction. These results could be used to guide the planning and development of the new city.

Analysis on the Influence Factors of CO2 Emission in France - Based on LMDI Approach

2012 ◽  
Vol 616-618 ◽  
pp. 1537-1540 ◽  
Author(s):  
Shuo Wang
Keyword(s):  
Energy Use ◽  
Influence Factors ◽  
Energy Structure ◽  
Carbon Density ◽  
Logarithmic Mean ◽  
Index Method ◽  
Divisia Index ◽  
Structure Problem

This article uses Logarithmic Mean Divisia Index Method (LMDI) to analyze influence factors of emission in France during last 50 years, including energy use, GDP, carbon density, energy structure and population. Energy structure problem is proposed at the end of the article.

Sign in / Sign up

Export Citation Format

Share Document