scholarly journals The Effect of Condenser Plate Material on Single Slope Solar Still Productivity under Malaysian Climate

Access to fresh water is a problem faced by both developed and under developed nations. Although seawater is plentiful, large amounts of energy is required to separate the potable water from the salts. Compared to other desalination processes utilising fossil fuels, solar distillation is inexpensive, environmentally friendly and employs clean and renewable energy. This paper seeks to explore the effect of the single slope solar still condenser plate material on the still production under Malaysian climate. 5 mm thick extra clear float glass condenser plate produced the highest amount of fresh water (63.5 ml) compared to 2 mm thick clear float glass and 5 mm thick bronze glass.

2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Huang Huanhai

The potential crisis of energy and the deterioration of ecological environment make the world's cumbersomedevelopment of renewable energy including new energy, including solar energy. Traditional energy in the coal, oil andnatural gas are evolved from ancient fossils, it is collectively referred to as fossil fuels. As the world's energy needscontinue to increase, fossil fuels will also be depleted, it is necessary to fi nd a new energy to replace the traditionalenergy. Solar energy is a clean renewable energy with mineral energy incomparable superiority. Modern society shouldbe a conservation-oriented society, and social life should also be a life-saving energy. At the same time, Premier WenJiabao also proposed on June 30, 2005 and stressed the need to speed up the construction of a conservation-orientedsociety. And solar energy as an inexhaustible new environmentally friendly energy has become the world's energyresearch work in the world an important issue. Is the world in the economic situation to take a simpler, economical,environmentally friendly and reliable building heating and heating energy-saving measures. This paper summarizes thecurrent global energy status, indicating the importance of solar power and prospects. Details of the various solar powergeneration methods and their advantages, and made a comparison of this power generation parameters. At the sametime pointed out that the diffi culties faced by solar power and solutions, as well as China's solar power of the favorableconditions and diffi culties. The future of China's solar energy made a prospect.


2021 ◽  
Vol 2119 (1) ◽  
pp. 012096
Author(s):  
Naseer T. Alwan ◽  
S E Shcheklein ◽  
O M Ali

Abstract Solar distillation is an important technology to get potable water from saltwater using clean and free solar energy. In the current study, an experimental and theoretical investigation of a single-slope traditional solar still was carried out, and the freshwater productivity and thermal efficiency were evaluated for four typical days (19/06, 17/07, 22/08, and 15/09) of 2019 by implementing temperature parameters in different points of the solar still, and the weather parameters such as solar radiation, and ambient air temperature. The study showed an acceptable agreement between the experimental and theoretical results with an average of 6.6% measured deviation of the experimental data. It was noticed that the highest values of productivity were recorded on July 17, 2019.


2014 ◽  
Vol 14 (1) ◽  
pp. 55-64
Author(s):  
Titis Rosari ◽  
Wahyono Hadi ◽  
Ali Masduqi

Solar still atap kaca merupakan salah satu inovasi renewable energy untuk proses desalinasi. Penambahan reflektor parabolic trough berfungsi untuk meningkatkan suhu dalam sistem. Tujuan penelitian ini adalah menganalisa volume air tawar yang dihasilkan dengan parabolic trough, memisahkan DHL dan TDS dari air olahan, menentukan tinggi air optimum, dan efek warna pada basin. Penelitian menggunakan aliran semi kontinu dengan pengaturan aliran air menggunakan pelampung air. Air baku yang digunakan berasal dari sumur warga Kejawan Putih. Penggunaan parabolic trough pada sistem desalinasi dapat meningkatkan volume produksi hingga 66% dibandingkan tanpa menggunakan parabolic trough. Efisiensi destilasi ekperimen mencapai 18,12%.  Volume yang dihasilkan sebesar 2,494 L/m2 dalam satu hari dengan laju destilasi 0,312 L/m2. Kemampuan penyisihan TDS dan DHL sebesar 99,9%. Pada eksperimen ini variabel warna bak dan ketinggian air tidak berpengaruh signifikan terhadap hasil kondensat. Solar still is one of the inovations of renewable energy for desalination process. The function of using parabolic trough reflector is to increase temperature on the system. The purposes of this study was to analyze fresh water yield by using of parabolic trough, removing DHL and TDS from brackish water’s samples, and effect of color on the basin. This research using semi-continuous flow with water flow setting by water buoy. Raw water used was came from wells at Kejawan Putih subdistrict.. The using of the parabolic trough desalination system can increase production volume by 66% when compared without parabolic trough. Experimental distillation efficiency reached 18.12%. Condensate yield has been found to be 2,494 L/m2 in one day and distillation rate of 0.312 L/m2.  These process can allowance 99.9% of the TDS and DHL. In this experiment the variable of basin color and depth water did not significantly influence to condensate yield.


Author(s):  
Pradeep Sen ◽  
Prof. Pankaj Badgaiyan ◽  
Prof. Bharat Girdhani ◽  
Prof. Shamir Daniel

Solar distillation purifies water by transferring sun's heat to a simple device. A shallow basin with a glass shield makes up the majority of the system, which is usually referred to as a solar even now. Evaporation takes place when the pool water is heated by the sun. Humidity rises, condenses on the shield, and drips into a drip tray, leaving salts, minerals, as well as the majority of contaminants behind. The oceans, that have a high salinity, are now the only nearly inexhaustible source of water supply.Separating salts from seawater, on the other hand, necessitates a huge amount of energy, that also, when derived from fossil fuels, can be destructive to the environment. As a result, desalination of seawater must be done using environmentally friendly energy sources. PCM which are solar,  are widely used to store solar radiation during the day and release it in the evening, in a wide range of solar applications


2021 ◽  
Vol 2021 ◽  
pp. 1-24
Author(s):  
Ahmadreza Ayoobi ◽  
Mahdi Ramezanizadeh

In recent years, producing energy and potable water has become a contemporaneous issue in all areas, especially in rural and remote areas. It is due to the limitation of fossil fuels in generating energy and the daily increase of potable water topic pollution due to various development activities in the industries. Gradually, the use of renewable energies has been suggested as far as humans focus on using these energies in various activities, which is gratis and accessible in more areas without having negative anthropogenic hazards. Solar radiation has an important position in renewable energies and has played a significant role in the desalination process due to the convenience in applying and abundance in the areas with potable water shortages. However, one of the active solar stills is the coupling of conventional solar still with a flat plate collector. In this type, a flat plate collector is used to raise the temperature of saline water which increases the productivity. In this research, the solar still coupled with a flat plate collector is reviewed as the active solar still and the affecting parameters on its performance and efficiency are discussed. First, a summary of working research and their research of flat plate collectors is reviewed to be more familiar with flat plate collectors, their details, and technology. Then, solar still coupled with a flat plate collector is extensively reviewed and discussed in detail. Four types of studies on solar still coupled with a flat plate collector were done, including energy analysis, exergy analysis, economic analysis, and productivity evaluation.


2021 ◽  
Vol 13 (1) ◽  
pp. 98-104
Author(s):  
Abhinav Yadav ◽  
Md Saifullah Khalid ◽  
Prashant Saini ◽  
Ankit Kumar

The necessity of pure water is rising each day, causes are population, industrial and agricultural expansion, worldwide. Due to the increasing population of world the fresh water will become more serious problem in the coming days. Hence, people around the world have to work on different and efficient methodology to generate potable water. Solar still is one among these methods acting device. In this paper, a review of using PCM and PCM with other enhancement techniques has been discussed. Use of stearic acid as a PCM below the liner of basin, each day pure water of 9.005kg/m2 per day and 4.998 kg/m2 per day has been found in the company of PCM and not including of PCM respectively. It is observed that solar desalination system in the company of paraffin-CuO is best among the others solar still with paraffin PCM, paraffin-TiO2, paraffin-GO. CuO, TiO2 and GO are the nanoparticles.


2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Kalpesh V. Modi ◽  
Dhruvin L. Shukla ◽  
Dipak B. Ankoliya

In major region of the world, ample amount of fresh water is required for the drinking purpose as well as for the agricultural and industrial growth. Hence, it is necessary to investigate the alternate clean water extraction technologies to get the potable water from the saline water available at local area or inside the earth. One of the methods used to get the fresh water from the brackish water is solar distillation and the means used is called as a solar still. In the present work, single slope double basin solar still performance has been investigated with and without using Al2O3 nanoparticles at the location 20.61°N, 72.91°E. For the experimentation, two identical single slope double basin solar stills were fabricated with the same basin area. The yield of solar still, one without nanoparticles and the other with Al2O3 nanoparticles, has been measured for various weight concentrations of Al2O3 nanoparticles such as 0.01%, 0.05%, 0.10%, and 0.20%. The results show that the use of nanoparticles in solar still increases the distilled output by 17.6%, 12.3%, 7.2%, and 2.6% for weight concentrations of 0.01%, 0.05%, 0.10%, and 0.20%, respectively, in comparison to the solar still without nanoparticles.


2014 ◽  
Vol 567 ◽  
pp. 56-61 ◽  
Author(s):  
Ali Riahi ◽  
Khamaruzaman Wan Yusof ◽  
Mohamed Hasnain Isa ◽  
Balbir Singh Mahinder Singh ◽  
Amirhossein Malakahmad ◽  
...  

This study aims at improving a solar distillation still by comparing the performance of four types of double slope single basin solar stills to produce adequate amount of potable water in the areas with confined fresh water. These solar stills fabricated with similar shapes. In each solar still a stainless steel basin with the length of 50 cm, width of 30 cm and depth of 8 cm was utilized. The still configurations differed based on inclusion of 2 cm depth of sea sand layer in the basin, a layer of black paint in the basin and use of a 50 W PV-DC heater. The study was conducted to increase the potable water production under Malaysia tropical condition. A comparative research of cumulative water production among these solar stills showed that solar still with black painted basin was the more efficient; producing 234 %, 190% and 148% the potable water produced by a conventional solar still, solar still with sand layer in basin and solar still connected to a PV-DC heater, respectively.


2018 ◽  
Vol 5 (2) ◽  
pp. 124-133
Author(s):  
S.M. Atnaw ◽  
R.M. Ramli ◽  
S.A. Rusdah ◽  
T. Marimuthu ◽  
P. Mardarveran ◽  
...  

Direct sunlight has been utilized long back for desalination of water. Solar still is a device that converts saline water to potable water. This project mainly discussed about point-focus parabolic solar still (PPSS). Since lack of water supply has become a serious problem today, this prototype is design to produce fresh water from saline water to enable continuous supply of water. However, the current solar desalination generation capacity is generally low and has high installation cost. Hence, there is a need for the enhancement of the productivity which can be achieved through point focus parabolic solar still. Existing PPSS produces of 3.56 L/m2 fresh water of per day. In this project, we have some modifications which will increase the productivity of PPSS.


Sign in / Sign up

Export Citation Format

Share Document