scholarly journals Active faults in the epicentral and mesoseismal Ml 6.0 24, 2016 Amatrice earthquake region, central Italy. Methodological and seismotectonic issues

2016 ◽  
Vol 59 ◽  
Author(s):  
Emanuela Falcucci ◽  
Stefano Gori ◽  
Fabrizio Galadini ◽  
Giandomenico Fubelli ◽  
Marco Moro ◽  
...  
Keyword(s):  
Central Italy ◽  
Active Faults ◽  
Surface Expression ◽  
National Database ◽  
Current Debate ◽  
Tectonic Structures ◽  
Geological Evidence ◽  
Seismogenic Source ◽  
2016 Amatrice Earthquake ◽  
Near Future

The August 24, 2016 Amatrice earthquake (Ml 6.0) struck a region of the central Apennines (Italy) where several active faults were known since decades, most of which are considered the surface expression of seismogenic sources potentially able to rupture during earthquakes with M of up to 6.5-7. The current debate on which structure/s activated during the mainshock and the possibility that conterminous faults may activate in a near future urged us gathering all the data on surface geological evidence of fault activity we collected over the past 15-20 years in the area. We then map the main tectonic structures of the 2016 earthquake epicentral and mesoseismal region. Our aim is to provide hints on their seismogenic potential, as possible contribution to the national Database of Individual Seismogenic Source (DISS) and to the Database of the active and capable fault ITaly HAzard from CApable faults (ITHACA).

scholarly journals Surface faulting during the August 24, 2016, Central Italy earthquake (Mw 6.0): preliminary results

2016 ◽  
Vol 59 ◽  
Author(s):  
Franz A. Livio ◽  
A. M. Michetti ◽  
E. Vittori ◽  
L. Gregory ◽  
L. Wedmore ◽  
...  
Keyword(s):  
Central Italy ◽  
Surface Expression ◽  
Deformation Pattern ◽  
Complex Deformation ◽  
Fault Surface ◽  
Preliminary Results ◽  
The North ◽  
Central Italy Earthquake ◽  
Seismogenic Source ◽  
Adjacent Structures

<p>We present some preliminary results on the mapping of coseismically-induced ground ruptures following the Aug. 24, 2016, Central Italy earthquake (Mw 6.0). The seismogenic source, as highlighted by InSAR and seismological data, ruptured across two adjacent structures: the Vettore and Laga faults. We collected field data on ground breaks along the whole deformed area and two different scenarios of on-fault coseismic displacement arise from these observations. To the north, along the Vettore fault, surface faulting can be mapped quite continuously along a well-defined fault strand while such features are almost absent to the south, along the Laga fault, where flysch-like marly units are present. A major lithological control, affects the surface expression of faulting, resulting in a complex deformation pattern.</p>

scholarly journals On the complexity of surface ruptures during normal faulting earthquakes: excerpts from the 6 April 2009 L'Aquila (central Italy) earthquake (<i>M</i><sub>w</sub> 6.3)

Solid Earth ◽  
2014 ◽  
Vol 5 (1) ◽  
pp. 389-408 ◽  
Author(s):  
L. Bonini ◽  
D. Di Bucci ◽  
G. Toscani ◽  
S. Seno ◽  
G. Valensise
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Normal Fault ◽  
Normal Faulting ◽  
Seismogenic Fault ◽  
Geological Evidence ◽  
Central Italy Earthquake ◽  
Seismological Data ◽  
Seismogenic Source ◽  
Earthquake Potential

Abstract. Over the past few years the assessment of the earthquake potential of large continental faults has increasingly relied on field investigations. State-of-the-art seismic hazard models are progressively complementing the information derived from earthquake catalogs with geological observations of active faulting. Using these observations, however, requires full understanding of the relationships between seismogenic slip at depth and surface deformation, such that the evidence indicating the presence of a large, potentially seismogenic fault can be singled out effectively and unambiguously. We used observations and models of the 6 April 2009, Mw 6.3, L'Aquila, normal faulting earthquake to explore the relationships between the activity of a large fault at seismogenic depth and its surface evidence. This very well-documented earthquake is representative of mid-size yet damaging earthquakes that are frequent around the Mediterranean basin, and was chosen as a paradigm of the nature of the associated geological evidence, along with observational difficulties and ambiguities. Thanks to the available high-resolution geologic, geodetic and seismological data aided by analog modeling, we reconstructed the full geometry of the seismogenic source in relation to surface and sub-surface faults. We maintain that the earthquake was caused by seismogenic slip in the range 3–10 km depth, and that the slip distribution was strongly controlled by inherited discontinuities. We also contend that faulting was expressed at the surface by pseudo-primary breaks resulting from coseismic crustal bending and by sympathetic slip on secondary faults. Based on our results we propose a scheme of normal fault hierarchization through which all surface occurrences related to faulting at various depths can be interpreted in the framework of a single, mechanically coherent model. We stress that appreciating such complexity is crucial to avoiding severe over- or under-estimation of the local seismogenic potential.

scholarly journals The Role of Faults in Groundwater Circulation before and after Seismic Events: Insights from Tracers, Water Isotopes and Geochemistry

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1499
Author(s):  
Davide Fronzi ◽  
Francesco Mirabella ◽  
Carlo Cardellini ◽  
Stefano Caliro ◽  
Stefano Palpacelli ◽  
...  
Keyword(s):  
Preferential Flow ◽  
Central Italy ◽  
Tracer Tests ◽  
Integrated Approach ◽  
Fault System ◽  
Tectonic Structures ◽  
Fault Systems ◽  
Isotopic Analyses ◽  
Before And After

The interaction between fluids and tectonic structures such as fault systems is a much-discussed issue. Many scientific works are aimed at understanding what the role of fault systems in the displacement of deep fluids is, by investigating the interaction between the upper mantle, the lower crustal portion and the upraising of gasses carried by liquids. Many other scientific works try to explore the interaction between the recharge processes, i.e., precipitation, and the fault zones, aiming to recognize the function of the abovementioned structures and their capability to direct groundwater flow towards preferential drainage areas. Understanding the role of faults in the recharge processes of punctual and linear springs, meant as gaining streams, is a key point in hydrogeology, as it is known that faults can act either as flow barriers or as preferential flow paths. In this work an investigation of a fault system located in the Nera River catchment (Italy), based on geo-structural investigations, tracer tests, geochemical and isotopic recharge modelling, allows to identify the role of the normal fault system before and after the 2016–2017 central Italy seismic sequence (Mmax = 6.5). The outcome was achieved by an integrated approach consisting of a structural geology field work, combined with GIS-based analysis, and of a hydrogeological investigation based on artificial tracer tests and geochemical and isotopic analyses.

scholarly journals Surface-Rupturing Historical Earthquakes in Australia and Their Environmental Effects: New Insights from Re-Analyses of Observational Data

Geosciences ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 408 ◽  
Author(s):  
King ◽  
Quigley ◽  
Clark
Keyword(s):  
Observational Data ◽  
Environmental Effects ◽  
Active Faults ◽  
Magnetic Data ◽  
Future Research ◽  
Surface Rupture ◽  
Secondary Fracture ◽  
Geological Evidence ◽  
Surface Ruptures ◽  
Strong Control

We digitize surface rupture maps and compile observational data from 67 publications on ten of eleven historical, surface-rupturing earthquakes in Australia in order to analyze the prevailing characteristics of surface ruptures and other environmental effects in this crystalline basement-dominated intraplate environment. The studied earthquakes occurred between 1968 and 2018, and range in moment magnitude (Mw) from 4.7 to 6.6. All earthquakes involved co-seismic reverse faulting (with varying amounts of strike-slip) on single or multiple (1–6) discrete faults of ≥ 1 km length that are distinguished by orientation and kinematic criteria. Nine of ten earthquakes have surface-rupturing fault orientations that align with prevailing linear anomalies in geophysical (gravity and magnetic) data and bedrock structure (foliations and/or quartz veins and/or intrusive boundaries and/or pre-existing faults), indicating strong control of inherited crustal structure on contemporary faulting. Rupture kinematics are consistent with horizontal shortening driven by regional trajectories of horizontal compressive stress. The lack of precision in seismological data prohibits the assessment of whether surface ruptures project to hypocentral locations via contiguous, planar principal slip zones or whether rupture segmentation occurs between seismogenic depths and the surface. Rupture centroids of 1–4 km in depth indicate predominantly shallow seismic moment release. No studied earthquakes have unambiguous geological evidence for preceding surface-rupturing earthquakes on the same faults and five earthquakes contain evidence of absence of preceding ruptures since the late Pleistocene, collectively highlighting the challenge of using mapped active faults to predict future seismic hazards. Estimated maximum fault slip rates are 0.2–9.1 m Myr-1 with at least one order of uncertainty. New estimates for rupture length, fault dip, and coseismic net slip can be used to improve future iterations of earthquake magnitude—source size—displacement scaling equations. Observed environmental effects include primary surface rupture, secondary fracture/cracks, fissures, rock falls, ground-water anomalies, vegetation damage, sand-blows / liquefaction, displaced rock fragments, and holes from collapsible soil failure, at maximum estimated epicentral distances ranging from 0 to ~250 km. ESI-07 intensity-scale estimates range by ± 3 classes in each earthquake, depending on the effect considered. Comparing Mw-ESI relationships across geologically diverse environments is a fruitful avenue for future research.

scholarly journals Liquefaction phenomena associated with the Emilia earthquake sequence of May–June 2012 (Northern Italy)

2013 ◽  
Vol 13 (4) ◽  
pp. 935-947 ◽  
Author(s):  
Keyword(s):  
Structural Characteristics ◽  
High Water ◽  
Web Based ◽  
Geological Evidence ◽  
Po Plain ◽  
Emilia Earthquake ◽  
Blind Thrust ◽  
Empirical Relations ◽  
Seismogenic Source ◽  
Deformation Area

Abstract. In this paper we present the geological effects induced by the 2012 Emilia seismic sequence in the Po Plain. Extensive liquefaction phenomena were observed over an area of ~ 1200 km2 following the 20 May, ML 5.9 and 29 May, ML 5.8 mainshocks; both occurred on about E–W trending, S dipping blind thrust faults. We collected the coseismic geological evidence through field and aerial surveys, reports from local people and Web-based survey. On the basis of their morphologic and structural characteristics, we grouped the 1362 effects surveyed into three main categories: liquefaction (485), fractures with liquefaction (768), and fractures (109). We show that the quite uneven distribution of liquefaction effects, which appear concentrated and aligned, is mostly controlled by the presence of paleo-riverbeds, out-flow channels and fans of the main rivers crossing the area; these terrains are characterised by the pervasive presence of sandy layers in the uppermost 5 m, a local feature that, along with the presence of a high water table, greatly favours liquefaction. We also find that the maximum distance of observed liquefaction from the earthquake epicentre is ~ 30 km, in agreement with the regional empirical relations available for the Italian Peninsula. Finally, we observe that the contour of the liquefaction observations has an elongated shape almost coinciding with the aftershock area, the InSAR deformation area, and the I ≥ 6 EMS area. This observation confirms the control of the earthquake source on the liquefaction distribution, and provides useful hints in the characterisation of the seismogenic source responsible for historical and pre-historical liquefactions.

Active Faulting in Source Region of 2016–2017 Central Italy Event Sequence

2018 ◽  
Vol 34 (4) ◽  
pp. 1557-1583 ◽  
Author(s):  
Fabrizio Galadini ◽  
Emanuela Falcucci ◽  
Stefano Gori ◽  
Paolo Zimmaro ◽  
Daniele Cheloni ◽  
...  
Keyword(s):  
Source Region ◽  
Central Italy ◽  
Active Faults ◽  
Earthquake Sequence ◽  
Fault System ◽  
Fault Plane Solutions ◽  
Moment Tensors ◽  
Central Italy Earthquake ◽  
Finite Fault ◽  
Main Shocks

The Central Italy earthquake sequence produced three main shocks: M6.1 24 August, M5.9 26 October, and M6.5 30 October 2016. Additional M5–5.5 events struck this territory on 18 January 2017 in the Campotosto area. Fault plane solutions for the main shocks exhibit normal faulting (characteristic of crustal extension occurring in the inner central Apennines). Significant evidence, including hypocenter locations, strike and dip angles of the moment tensors, inverted finite fault models (using GPS, interferometric aperture radar, and ground motion data), and surface rupture patterns, all point to the earthquakes having been generated on the Mt. Vettore–Mt. Bove fault system (all three main shocks) and on the Amatrice fault, in the northern sector of the Laga Mountains (portion of 24 August event). The earthquake sequence provides examples of both synthetic and antithetic ruptures on a single fault system (30 October event) and rupture between two faults (24 August event). We describe active faults in the region and their segmentation and present understanding of the potential for linkages between segments (or faults) in the generation of large earthquakes.

Seismic velocity precursors to the 2016 Mw 6.5 Norcia (Italy) earthquake

Geology ◽  
2020 ◽  
Vol 48 (9) ◽  
pp. 924-928 ◽  
Author(s):  
C. Chiarabba ◽  
P. De Gori ◽  
M. Segou ◽  
M. Cattaneo
Keyword(s):  
Seismic Velocity ◽  
Time Windows ◽  
Central Italy ◽  
Active Faults ◽  
Central Italy Earthquake ◽  
Preparatory Phase ◽  
Triggering Mechanisms ◽  
Failure Conditions ◽  
Deformation Patterns

Abstract Earthquakes occur as the result of long-term strain accumulation on active faults and complex transient triggering mechanisms. Although laboratory experiments show accelerating deformation patterns before failure conditions are met, imaging similar preparatory phases in nature remains difficult because it requires dense monitoring in advance. The 2016 Amatrice-Visso-Norcia (central Italy) earthquake cascade, captured by an unprecedented seismic network, provided a unique testing ground to image the preparatory phase of a large event. The crustal volume of the Norcia incipient fault was densely illuminated by seismic rays from more than 13,000 earthquakes that occurred within the 3 mo before the main shock nucleation. We performed seismic tomography in distinct time windows that revealed the precursory changes of elastic wave speed, signaling (1) the final locked state of the fault, and (2) the rapid fault-stiffness alterations near the hypocenter just a few weeks before the event. The results are the first instance where short-lived, hard-to-catch crustal properties shed light on evolving earthquake cascades.

scholarly journals Seismic damage to ancient monuments in Chiang Saen (Northern Thailand): implication for historical earthquakes in Golden Triangle area

2019 ◽  
Vol 377 (2155) ◽  
pp. 20180255 ◽  
Author(s):  
Teraphan Ornthammarath
Keyword(s):  
Eighteenth Century ◽  
Large Scale ◽  
Seismic Vulnerability ◽  
Active Faults ◽  
Lao Pdr ◽  
Historical Earthquakes ◽  
Geological Evidence ◽  
Ground Shaking ◽  
Golden Triangle ◽  
Ancient Monuments

Over the last few decades, three moderate earthquakes (Mw greater than 6.0) occurred in and around the Golden Triangle area (including Myanmar, Thailand and Lao PDR) causing unprecedented damage and loss of lives in the epicentral region. In addition to the damage to modern structures, most heritage structures in Chiang Saen, a major city of the Lan Na kingdom (from the thirteenth to the eighteenth century), were also affected. This work is intended to present observed historical structure damage from recent earthquakes, which could provide evidence for the severity of historical earthquakes from the thirteenth to the eighteenth century. Based on historical records, geological evidence and observed damage to ancient monuments in this historic town, existing heritage stupas and temples constructed since the fourteenth century sustained only minor to moderate damage from these historical earthquakes. Considering the seismic vulnerability of these historical monuments, Chiang Saen might have never been subjected to severe ground shaking greater than MMI intensity VII, similar to the major earthquake in 460 A.D. along the Mae Chan fault, which was responsible for the large-scale liquefaction and inundation of ancient Yonok town. This information could be important for paleoseismological and historical earthquake research to constrain the recurrence interval of major active faults in this area. This article is part of the theme issue ‘Environmental loading of heritage structures’.

Sign in / Sign up

Export Citation Format

Share Document