scholarly journals Experimental Study on Properties of Concrete Using Shredded Plastic Waste and M-Sand as Partial Replacement of Fine Aggregate

2021 ◽  
pp. 427-432
Author(s):  
Sindhu Vaardini U ◽  
Pon Soundarya M
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Plastic Waste ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Conventional Concrete ◽  
Manufactured Sand ◽  
And Behavior ◽  
Land Water

Disposal of large quantity of plastic causes land, water, and air pollution etc.., so a study is conducted to recycle the plastic in concrete. This work investigates about the replacement of natural aggregate with non-biodegradable plastic aggregate made up of mixed shredded plastic waste in concrete. Several tests are conducted such as compressive strength of cube, compressive strength of cylinder, flexural strength test of prism to identify the properties and behavior of concrete using shredded plastic aggregate. Replacement of fine aggregate weight by 0%, 5%, 10%, 15%, 20% with shredded plastic fine (PF) aggregate and manufactured sand (M-Sand). Totally 30 cubes, 30 cylinders and 30 prisms are casted to identify the compressive strength, cylindrical compressive strength, and flexural strength respectively. Casted specimens are tested at 7, 14 and 28 days. The identified results from concrete using shredded plastic aggregate are compared with conventional concrete. Result shows that initially there is increase in mechanical properties then there is reduction in mechanical properties due to addition of shredded plastic aggregate added concrete. This reduction in strength is mainly due to poor bond strength between cement and shredded plastic aggregate.

MAGNETIC FIELD TREATED WATER INFLUENCE ON STRUCTURAL CONCRETE ELEMENTS: ENVIRONMENTAL ISSUES OF CONCERN

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Ben Ngene ◽  
Gideon Bamigboye ◽  
Chidiebere Agomo ◽  
Kenechukwu Eneh ◽  
Olayinka Olajide
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Compressive Strength ◽  
Waste Glass ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Self Compacting Concrete ◽  
Conventional Concrete ◽  
Treated Water ◽  
Magnetized Water

The impact of magnetized water on the strength properties of concrete calls for a holistic appraisal of its effect on the environment of production and use. In this study, the influence of the Magnetic Field Treated Water (MFTW) on the strength of concrete produced under various environments is considered. The work considered three environments of use of magnetized water in concrete with respect to partial replacement of fine aggregate with waste glass; quality of curing medium on mechanical properties of concrete and effect on the mechanical properties of self-compacting concrete. The three scenarios presented involved preparing and testing concrete cubes made with magnetized water, cement, fine (sand and glass) and coarse (granite) aggregates at various levels of combination and environment of curing. The concrete cubes were cured for 7, 14, 28, and 56 days and the strength and other parameters, such as slump and workability, were compared with conventional concrete in normal environment. It was observed that concrete under self-compacting concrete made with MFTW had a 9.1% increase in compressive strength than normal; for concrete made with clay brick powder and MFTW, both the workability and compressive strength was higher than normal. The magnetized water in concrete with waste glass as partial replacement had higher slump value and 24% increase in compressive strength than conventional concrete. MFTW therefore improves strength development of concrete.

scholarly journals The Influence of Nano-SiO2 and Recycled Polypropylene Plastic Content on Physical, Mechanical, and Shrinkage Properties of Mortar

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Haiming Chen ◽  
Yangchen Xu ◽  
Donglei Zhang ◽  
Lingxia Huang ◽  
Yuntao Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Water Absorption ◽  
Construction Material ◽  
Autogenous Shrinkage ◽  
Physical And Mechanical Properties ◽  
Plastic Waste ◽  
Partial Replacement ◽  
Interfacial Zone

This work is aimed to study the possibility of recycling plastic waste (polypropylene (PP)) as aggregate instead of sand in the manufacturing of mortar or concrete. For this, an experimental study was carried out to evaluate the influence of nano-SiO2 and recycled PP plastic particles' content on physical, mechanical, and shrinkage properties and microstructure of the mortars with recycled PP plastic particles. The sand is substituted with the recycled PP plastic particles at dosages (0%, 20%, 40%, and 60% by volume of the sand). The nano-SiO2 content is 5% by weight of cement. The physical (porosity, water absorption, and density), mechanical (compressive and flexural strength) and shrinkage properties of the mortars were evaluated, and a complementary study on microstructure of the interface between cementitious matrix and PP plastic particles was made. The measurements of physical and mechanical properties showed that PP-filled mortar had lower density and better toughness (higher ratio of flexural strength to compressive strength). However, the compressive strength and flexural strength of PP-filled mortar is reduced, and the porosity, water absorption, autogenous shrinkage, and dry shrinkage increased as compared to normal cement mortar. The addition of nano-SiO2 reduced the porosity, water absorption, and drying shrinkage of PP-filled mortar and effectively improved the mechanical properties, but increased its autogenous shrinkage. A microscopic study of the interfacial zone (plastic-binder) has shown that there is poor adhesion between PP plastic particles and cement paste. From this work, it is found that recycled PP plastic waste has a great potential to be a construction material. It can be used as partial replacement of natural aggregates instead.

scholarly journals Mechanical Properties and Microstructural Features using Stone Dust as a Partial Replacement of Sand

2019 ◽  
Vol 8 (6) ◽  
pp. 5232-5237
Keyword(s):  
Mechanical Properties ◽  
Economic Growth ◽  
Sustainable Development ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Natural Resources ◽  
Strength Test ◽  
Partial Replacement ◽  
Test Results ◽  
Stone Dust

Today’s world is always leads to development in technology as well as the economic growth though sometime these will affect the environment badly. That’s why world environmental commission coined the termed called sustainable development where development takes place without hampering the others’ needs. Concrete industry is rapidly growing industry in India which consumes lots of natural resources during the production of concrete. Here Stone dust is used as a sustainable material in place of sand partially. M25 grade of concrete has been chosen for the experiments. Different mechanical properties of concrete like compressive strength, Split tensile, flexural strength etc. and Microstructural features like SEM, EDX have been included in this study. Compressive Strength and flexural strength test results shown the increase in the strength. Sulphate Resistance Properties have been tested by curing the cubes in the MgSO4 solution and increase in weight has been observed. Similarities are found in the SEM pictures

scholarly journals Comparison of Conventional Concrete and Replacement of River Sand by Waste Foundry Sand and Cement by Nano-Silica

2020 ◽  
pp. 201-205
Keyword(s):  
Experimental Investigation ◽  
Compressive Strength ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Nano Silica ◽  
River Sand ◽  
Conventional Concrete ◽  
Foundry Sand ◽  
Concrete Production ◽  
Waste Foundry Sand

This paper presents an experimental investigation on the properties of concrete in which like cement is partially replacing by used nano silica and is partially replacing by used waste foundry sand. Because now a day the world wide consumption of sand as cement and as fine aggregate in concrete production is very high. Nano silica and waste foundry sand are major by product of casting industry and create land pollution. The cement will be replaced with nano silica and the river sand will be replaced with waste foundry sand (0%, 5%, 10%, 15%, 20%). This experimental investigation was done and found out that with the increase in the nano silica and waste foundry sand ratio. Compression test has been done to find out the compressive strength of concrete at the age of 7, 14, 21, and 28. Test result indicates in increasing compressive strength of plain concrete by inclusion of nano silica as a partial replacement of cement and waste foundry sand as a partial replacement of fine aggregate.

scholarly journals Effect of basalt powder addition on properties of mortar

2019 ◽  
Vol 262 ◽  
pp. 06002 ◽  
Author(s):  
Magdalena Dobiszewska ◽  
Waldemar Pichór ◽  
Paulina Szołdra
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Beneficial Effect ◽  
Cement Paste ◽  
Cement Hydration ◽  
Asphalt Mixture ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Freeze Resistance ◽  
Powder Addition

The study evaluates the use of waste basalt powder as a replacement of cement to enhance hydration of cement and mortar properties. The basalt powder is a waste resulting from preparation of aggregate used in asphalt mixture production. Previous studies have shown that analysed waste used as a fine aggregate replacement has a beneficial effect on some properties of mortar and concrete, i.e. compressive strength, flexural strength and freeze resistance. The present study shows the results of the research concerning the modification of cement paste and mortar with basalt powder. The modification consists in adding the powder waste as a partial replacement of cement. The percentages of basalt powder in this research are 0-40% and 0-20% by mass of cement in the pastes and mortars respectively. The experiments were carried out to determine the influence of basalt powder on cement hydration, as well as compressive and flexural strength. Results indicate that addition of basalt powder as a replacement of cement leads to deterioration of compressive strength. The flexural strength of mortar is improved in some cases. Waste basalt powder only slightly influences the cement hydration.

scholarly journals Study of Light Weight Fibre Reinforced Concrete by Partial Replacement of Coarse Aggregate with Pumice Stone

2021 ◽  
Vol 9 (9) ◽  
pp. 933-940
Author(s):  
Mohammed Sohel Ahmed
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Light Weight ◽  
Structural Members ◽  
Conventional Concrete ◽  
Shrinkage Cracking ◽  
Pumice Stone ◽  
Average Compressive Strength

Abstract: As the demand for the structural members application in the concrete industry is continuously increasing simultaneously many a times it is required to lower the density of concrete enabling light weight which helps in easy handling of the concrete and its members. In this research an experimental endeavour has been made to equate conventional concrete with light weight by partially substituting the coarse aggregate with the pumice stone aggregate in M30 grade mix design. Simultaneously small fibres of Recron3's Polypropylene have been applied to the concrete as a reinforcing medium to minimize shrinkage cracking and improve tensile properties. The coarse aggregate was substituted by the pumice aggregate in 10, 20, 30, 40, and 50 percent and fibres respectively in 0.5, 1, 1.5, 2 and 2.5 percent. The experiment is focused on strength parameters to determine the most favourable optimum percent with respect to conventional concrete. Keywords: OPC (Ordinary Portland Cement)1, FA (Fine Aggregate)2, CA (Coarse Aggregate) 3, fck (Characteristic Compressive Strength at 28days)4, Sp. Gr (Specific Gravity)5, WC (Water Content)6, W/C (Water Cement Ratio)7, S (Standard Deviation)8, Fck (Target Average Compressive Strength at 28days)9.

scholarly journals Compressive Strength of Concrete with Construction and Demolition Waste and m-SAND using Additives

2019 ◽  
Vol 8 (2S10) ◽  
pp. 935-937
Keyword(s):  
Compressive Strength ◽  
Green Building ◽  
Cost Effective ◽  
Construction And Demolition Waste ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Demolition Waste ◽  
Rapid Urbanization ◽  
Manufactured Sand ◽  
Coarse Aggregates

Construction and Demolition wastes(C&D wastes) are generated in all cities of the world due to rapid urbanization. Disposing C & D waste these days is a costly affair, and raises environmental issues. Hence an attempt is made to reuse the demolished concrete as a partial replacement of natural coarse aggregates. Also due to ban of sand mining by local authorities, the cost of natural fine aggregate is very high and itself becoming a scarce material. Hence crushed stone aggregates called manufactured sand (m sand) is used, totally replacing natural fine aggregates. This concept is found to be cost effective, minimizes disposal of C & D wastes, and leads towards Green Building Concepts. Compression test on M40 concrete cubes of size 150mmx150mmx150mm are conducted at end of 7 days and 28days. Mix design for M40 concrete is made in accordance to IS: 10262-2019 with water cement ratio of 0.45 using 53 Grade Ordinary Portland cement. Superplasticizer (LIQUIFIX) is used to enhance workability. Nano Silica (NS)(1.5% by weight of cement),Wollastonite powder(WP)(10%by weight of cement) and Basalt fibres(BF)(1% by weight of cement) are added as additives. It is observed, that compressive strength of 7 days and 28 days cured samples is 25% more with the addition of all three additives compared to samples without additives. Hence the loss of compressive strength obtained by using demolished concrete as aggregates and m sand in concrete is regained with the addition of additives.

scholarly journals Feasibility Study on Use of Plastic Waste as Fine Aggregate in Concrete Mixes

2020 ◽  
Vol 1 (1) ◽  
pp. 26
Author(s):  
Sudarshan Dattatraya Kore
Keyword(s):  
Mechanical Properties ◽  
Waste Management ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Plastic Waste ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Environment Friendly ◽  
Waste Plastic ◽  
Recycled Plastics

Plastic is used in many forms in day-to-day life. Since Plastic is non-biodegradable, landfills do not provide an environment friendly solution. Hence, there is strong need to utilize waste plastic. This creates a large quantity of garbage every day which is unhealthy and pollutes the environment. In present scenario solid waste management is a challenge in our country. The production of solid waste is increasing day to day and causes serious concerns to the environment. In this study, the recycled plastics are used in the concrete as a partial replacement of fine aggregate in concrete. The main purpose of this study is to investigate the mechanical properties of concrete such as workability, compressive, flexural and split tensile strengths of concrete mixes with partial replacement of conventional fine aggregate with aggregate produced from plastic waste. The use of plastic aggregate as replacement for fine aggregate enhances workability and fresh bulk density of concrete mixes. The mechanical properties of concrete such as compressive, flexural, and tensile strengths of concrete reduced marginally up to 10% replacement levels.

scholarly journals Mechanical Properties of Concrete Modified with Silica Fume and Integral Waterproof and Comparison with Waste Glass Aggregate Concrete

2022 ◽  
Vol 961 (1) ◽  
pp. 012082
Author(s):  
Taghreed Abd-Almahdee Musa ◽  
Hiba Ali Abbas ◽  
Ayam Jabbar Jihad
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Fume ◽  
Strength Test ◽  
Waste Glass ◽  
Fine Aggregate ◽  
Glass Aggregate ◽  
Water Proof ◽  
Strength And Durability

Abstract This study includes the effect of using different dosages of integral waterproof Admixture and silica fume on some mechanical properties of concrete. Concrete improved by using different ratios of integral water proof admixture(IWP admixture) to increase strength and durability, this admixture used as percentages from cement weight in each mix ranged from 0.0% to 2% ( 0.0, 1.0%, 1.2%,1.4%,1.6%,1.8%, and 2%), compressive strength test done for cubes with (10*10*10) cm for each mix. The flexural strength test was done by (10*10*40) cm beams and tested after 28 days of curing. comparison study was made between silica fume mixes properties and mixes without silica fume. Adding IWP admixture leads to increase mechanical properties of ordinary concrete, the reference mix shows compressive strength equal to 26.38 MPa, while mixes with 2% IWP gives 38.8 MPa in this study. The study also includes the effect of using 2 main dosages of silica fume to the mixes that contain IWP, the new concrete with two admixtures show better values of compressive, tensile and flexural strength comparing with mixes with only IWP, the compressive strength increased from 38.8 MPa for ordinary IWP mixes to 52.3 MPa for 10% silica fume concrete mixes, and also the flexural strength increased from 4.8 MPa for mixes with only IWP to 7.3 MPa for mixes modified with 10 % silica fume. Study include also using waste glass as fine aggregate in mixes contain IWP and 10% silica fume and that show more increment in mechanical properties also.

scholarly journals Properties of Mortar with Recycled Aggregates, and Polyacrylonitrile Microfibers Synthesized by Electrospinning

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3849 ◽  
Author(s):  
Manuel J. Chinchillas-Chinchillas ◽  
Manuel J. Pellegrini-Cervantes ◽  
Andrés Castro-Beltrán ◽  
Margarita Rodríguez-Rodríguez ◽  
Víctor M. Orozco-Carmona ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Total Porosity ◽  
Cementitious Materials ◽  
Effective Porosity ◽  
Recycled Aggregates ◽  
Capillary Absorption ◽  
Fine Aggregate ◽  
Water Penetration

Currently it is necessary to find alternatives towards a sustainable construction, in order to optimize the management of natural resources. Thus, using recycled fine aggregate (RFA) is a viable recycling option for the production of new cementitious materials. In addition, the use of polymeric microfibers would cause an increase in the properties of these materials. In this work, mortars were studied with 25% of RFA and an addition of polyacrylonitrile PAN microfibers of 0.05% in cement weight. The microfibers were obtained by the electrospinning method, which had an average diameter of 1.024 µm and were separated by means of a homogenizer to be added to the mortar. Cementing materials under study were evaluated for compressive strength, flexural strength, total porosity, effective porosity and capillary absorption, resistance to water penetration, sorptivity and carbonation. The results showed that using 25% of RFA causes decreases mechanical properties and durability, but adding PAN microfibers in 0.05% caused an increase of 2.9% and 30.8% of compressive strength and flexural strength respectively (with respect to the reference sample); a decrease in total porosity of 5.8% and effective porosity of 7.4%; and significant decreases in capillary absorption (approximately 23.3%), resistance to water penetration (25%) and carbonation (14.3% after 28 days of exposure). The results showed that the use of PAN microfibers in recycled mortars allowed it to increase the mechanical properties (because they increase the tensile strength), helped to fill pores or cavities and this causes them to be mortars with greater durability. Therefore, the use of PAN microfibers as a reinforcement in recycled cementitious materials would be a viable option to increase their applications.

Sign in / Sign up

Export Citation Format

Share Document