scholarly journals A new approach to momentum flux determinations using SKiYMET meteor radars

2005 ◽  
Vol 23 (7) ◽  
pp. 2433-2439 ◽  
Author(s):  
W. K. Hocking

Abstract. The current primary radar method for determination of atmospheric momentum fluxes relies on multiple beam studies, usually using oppositely directed coplanar beams. Generally VHF and MF radars are used, and meteor radars have never been successfully employed. In this paper we introduce a new procedure that can be used for determination of gravity wave fluxes down to time scales of 2-3h, using the SKiYMET meteor radars. The method avoids the need for beam forming, and allows simultaneous determination of the three components of the wind averaged over the radar volume, as well as the variance and flux components , where refers to the fluctuating eastward wind, refers to the fluctuating northward wind, and refers to the fluctuating vertical wind. Data from radars in New Mexico and Resolute Bay are used to illustrate the data quality, and demonstrate theoretically expected seasonal forcing. Keywords. Meteorology and atmospheric dynamics (Middle atmosphere dynamics; Waves and tides; Climatology)

2004 ◽  
Vol 22 (2) ◽  
pp. 701-704 ◽  
Author(s):  
D. Kürschner ◽  
Ch. Jacobi

Abstract. The mesopause region monthly mean winds and semidiurnal tidal amplitudes and phases over Central Europe have been measured at Collm Observatory since September 1982. The regular annual cycle of the semidiurnal tidal amplitudes show maximum values during late August and September. In contrast to that, in autumn 2002 no enhancement of the tidal amplitudes was measured, while the autumn tidal phase transition occurred unusually early. Key words. Meteorology and atmospheric dynamics (middle atmosphere dynamics; waves and tides; climatology)


1998 ◽  
Vol 16 (8) ◽  
pp. 1014-1023 ◽  
Author(s):  
D. Pancheva ◽  
J. Laštovička

Abstract. On the basis of MEM spectrum analysis, the main planetary scale fluctuations formed in the lower ionosphere are studied over a period of 3–25 days during the CRISTA campaign (October-November 1994). Three dominant period bands are found: 3–5, 6–8 and 15–23 (mainly 16–18) days. For 7–8 and 16–18 day fluctuations, propagation was eastward with wave numbers K = 3 and K = 1, respectively. The magnitude of planetary wave activity in the mid-latitudes of the Northern Hemisphere during the CRISTA campaign seems to be fairly consistent with the expected undisturbed normal/climatological state of the atmosphere at altitudes of 80–100 km.Key words. Ionosphere (ionosphere-atmosphere interactions) · Meteorology and atmospheric dynamics (middle atmosphere dynamics; waves and tides)


2001 ◽  
Vol 19 (5) ◽  
pp. 545-562 ◽  
Author(s):  
E. G. Merzlyakov ◽  
Yu. I. Portnyagin ◽  
C. Jacobi ◽  
N. J. Mitchell ◽  
H. G. Muller ◽  
...  

Abstract. The longitudinal structure of the day-to-day variations of semidiurnal tide amplitudes is analysed based on coordinated mesosphere/lower thermosphere wind measurements at several stations during three winter campaigns. Possible excitation sources of these variations are discussed. Special attention is given to a nonlinear interaction between the semidiurnal tide and the day-to-day mean wind variations. Data processing includes the S-transform analysis which takes into account transient behaviour of secondary waves. It is shown that strong tidal modulations appear during a stratospheric warming and may be caused by aperiodic mean wind variations during this event.Key words. Meteorology and atmospheric dynamics (middle atmosphere dynamics; waves and tides)


2002 ◽  
Vol 20 (9) ◽  
pp. 1447-1467 ◽  
Author(s):  
W. K. Hocking ◽  
A. Hocking

Abstract. A new analysis method for producing tidal temperature parameters using meteor radar measurements is presented, and is demonstrated with data from one polar and two mid-latitude sites. The technique further develops the temperature algorithm originally introduced by Hocking (1999). That earlier method was used to produce temperature measurements over time scales of days and months, but required an empirical model for the mean temperature gradient in the mesopause region. However, when tides are present, this temperature gradient is modulated by the presence of the tides, complicating extraction of diurnal variations. Nevertheless, if the vertical wavelengths of the tides are known from wind measurements, the effects of the gradient variations can be compensated for, permitting determination of temperature tidal amplitudes and phases by meteor techniques. The basic theory is described, and results from meteor radars at Resolute Bay (Canada), London (Canada) and Albuquerque (New Mexico, USA) are shown. Our results are compared with other lidar data, computer models, fundamental tidal theory and rocket data. Phase measurements at two mid-latitude sites (Albuquerque, New Mexico, and London, Canada) show times of maximum for the diurnal temperature tide to change modestly throughout most of the year, varying generally between 0 h and 6 h, with an excursion to 12 h in June at London. The semidiurnal tide shows a larger annual variation in time of maximum, being at 2–4 h in the winter months but increasing to 9 h during the late summer and early fall. We also find that, at least at mid-latitudes, the phase of the temperature tide matches closely the phase of the meridional tide, and theoretical justification for this statement is given. We also demonstrate that this is true using the Global Scale Wave Model (Hagan et al., 1999). Median values for the temperature amplitudes for each site are in the range 5 to 6 Kelvin. Results from a more northern site (Resolute Bay) show less consistency between the wind tides and the temperature tides, supporting suggestions that the temperature tides may be zonally symmetric at these high latitudes (e.g. Walterscheid and Sivjee, 2001).Key words. Meteorology and atmospheric dynamics (middle atmosphere dynamics; waves and tides) – Radio science (signal processing)


2000 ◽  
Vol 18 (7) ◽  
pp. 834-843 ◽  
Author(s):  
N. M. Gavrilov ◽  
S. Fukao ◽  
T. Nakamura

Abstract. Averaged seasonal variations of wind perturbation intensities and vertical flux of horizontal momentum produced by internal gravity waves (IGWs) with periods 0.2-1 h and 1-6 h are studied at the altitudes 65-80 km using the MU radar measurement data from the middle and upper atmosphere during 1986-1997 at Shigaraki, Japan (35° N, 136° E). IGW intensity has maxima in winter and summer, winter values having substantial interannual variations. Mean wave momentum flux is directed to the west in winter and to the east in summer, opposite to the mean wind in the middle atmosphere. Major IGW momentum fluxes come to the mesosphere over Shigaraki from the Pacific direction in winter and continental Asia in summer.Key words: Meteorology and atmospheric dynamics (middle atmosphere dynamics; waves and tides) · Ionosphere (ionospheric disturbances)


2000 ◽  
Vol 18 (12) ◽  
pp. 1645-1650 ◽  
Author(s):  
R. J. Stening ◽  
C. Jacobi

Abstract. The lunar semidiurnal tide in winds measured at around 90 km altitude has been isolated with amplitudes observed up to 4 m s–1. There is a marked amplitude maximum in October and also a considerable phase variation with season. The average variation of phase with height indicated a vertical wavelength of more than 80 km but this, and other results, needs to be viewed in the light of the considerable averaging required to obtain statistical significance. Large year-to-year variations in both amplitude and phase were also found. Some phase comparisons with the GSWM model gave reasonable agreement but the model amplitudes above a height of 100 km were much larger than those measured. An attempt to make a comparison with the lunar geomagnetic tide did not yield a statistically significant result. Key words: Meteorology and atmospheric dynamics (middle atmosphere dynamics; waves and tides)


2017 ◽  
Vol 30 (1) ◽  
pp. 273-289
Author(s):  
Anmari Meerkotter

The Constitutional Court (CC) judgment of Lee v Minister of Correction Services 2013 2SA 144 (CC) is a recent contribution to transformative constitutional jurisprudence in the field of the law of delict. This matter turned on the issue of factual causation in the context of wrongful and negligent systemic omissions by the state. In this case note, I explore the law relating to this element of delictual liability with specific regard to the traditional test for factual causation – the conditio sine qua non (‘but-for’) test. In particular, I note the problems occasioned by formalistic adherence to this test in the context of systemic state omissions as evidenced by the SCA judgment in the same matter. I also consider the manner in which English courts have addressed this problem. Thereafter, I analyse the CC’s broader approach to the determination of factual causation as one based on common sense and justice. I argue that this approach endorses a break from a formalistic application of the test and constitutes a step towards an approach which resonates with the foundational constitutional values of freedom, dignity and equality. Furthermore, it presents an appropriate solution to the problems associated with factual causation where systemic omissions are concerned. I then consider the transformative impact of the Lee judgment. In particular, I argue that the broader enquiry favoured by the CC facilitates the realisation of constitutionally guaranteed state accountability, and amounts to an extension of the existing norm of accountability jurisprudence. Hence, I contend that the judgment presents a further effort by the Constitutional Court to effect wholesale the constitutionalisation of the law of delict, as well as a vindicatory tool to be used by litigants who have been adversely affected by systemic state omissions.


Author(s):  
Romain Desplats ◽  
Timothee Dargnies ◽  
Jean-Christophe Courrege ◽  
Philippe Perdu ◽  
Jean-Louis Noullet

Abstract Focused Ion Beam (FIB) tools are widely used for Integrated Circuit (IC) debug and repair. With the increasing density of recent semiconductor devices, FIB operations are increasingly challenged, requiring access through 4 or more metal layers to reach a metal line of interest. In some cases, accessibility from the front side, through these metal layers, is so limited that backside FIB operations appear to be the most appropriate approach. The questions to be resolved before starting frontside or backside FIB operations on a device are: 1. Is it do-able, are the metal lines accessible? 2. What is the optimal positioning (e.g. accessing a metal 2 line is much faster and easier than digging down to a metal 6 line)? (for the backside) 3. What risk, time and cost are involved in FIB operations? In this paper, we will present a new approach, which allows the FIB user or designer to calculate the optimal FIB operation for debug and IC repair. It automatically selects the fastest and easiest milling and deposition FIB operations.


1979 ◽  
Vol 44 (3) ◽  
pp. 700-710 ◽  
Author(s):  
Ivan Fořt ◽  
Hans-Otto Möckel ◽  
Jan Drbohlav ◽  
Miroslav Hrach

Profiles of the mean velocity have been analyzed in the stream streaking from the region of rotating standard six-blade disc turbine impeller. The profiles were obtained experimentally using a hot film thermoanemometer probe. The results of the analysis is the determination of the effect of relative size of the impeller and vessel and the kinematic viscosity of the charge on three parameters of the axial profile of the mean velocity in the examined stream. No significant change of the parameter of width of the examined stream and the momentum flux in the stream has been found in the range of parameters d/D ##m <0.25; 0.50> and the Reynolds number for mixing ReM ##m <2.90 . 101; 1 . 105>. However, a significant influence has been found of ReM (at negligible effect of d/D) on the size of the hypothetical source of motion - the radius of the tangential cylindrical jet - a. The proposed phenomenological model of the turbulent stream in region of turbine impeller has been found adequate for values of ReM exceeding 1.0 . 103.


Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3070
Author(s):  
Sebastian Iwaszenko ◽  
Jakub Munk ◽  
Stefan Baron ◽  
Adam Smoliński

Modern dentistry commonly uses a variety of imaging methods to support diagnosis and treatment. Among them, cone beam computed tomography (CBCT) is particularly useful in presenting head structures, such as the temporomandibular joint (TMJ). The determination of the morphology of the joint is an important part of the diagnosis as well as the monitoring of the treatment results. It can be accomplished by measurement of the TMJ gap width at three selected places, taken at a specific cross-section. This study presents a new approach to these measurements. First, the CBCT images are denoised using curvilinear methods, and the volume of interest is determined. Then, the orientation of the vertical cross-section plane is computed based on segmented axial sections of the TMJ head. Finally, the cross-section plane is used to determine the standardized locations, at which the width of the gap between condyle and fossa is measured. The elaborated method was tested on selected TMJ CBCT scans with satisfactory results. The proposed solution lays the basis for the development of an autonomous method of TMJ index identification.


Sign in / Sign up

Export Citation Format

Share Document