scholarly journals The impact of location of 3D printers and robots on the supply chain

2021 ◽  
Vol 9 (2) ◽  
pp. 489-500 ◽  
Author(s):  
Shunichi Ohmori
Keyword(s):  
Supply Chain ◽  
New Technologies ◽  
Practical Case ◽  
Inventory Cost ◽  
Total Cost ◽  
Advantages And Disadvantages ◽  
3D Printers ◽  
The Impact ◽  
Installation Cost

3D printers and robots (3DPR) are new technologies that may disrupt traditional supply chains.The location of the manufacturing place can be moved toward more customer side in the supply chain, which brings both agility and the ability of customization.The impact is yet to be examined quantitatively. In this paper we study the location of 3DPR in the supply chain. We present and compare three models of supply chains: Traditional supply chain; 3DPR at warehouse; 3DPR at shop. The semodels are compared by the equipment installation cost, the production cost,and inventory cost for safety-stock. The study presents a practical case study motivated from a real-world apparel company, discusses the three models under various parameter settings, comparing the obtained total cost and discovers the advantages and disadvantages.

scholarly journals Assessment of Social Acceptance for Autonomous Vehicles in Southeastern Poland

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5778
Author(s):  
Agnieszka Dudziak ◽  
Monika Stoma ◽  
Andrzej Kuranc ◽  
Jacek Caban
Keyword(s):  
Autonomous Vehicles ◽  
Social Acceptance ◽  
New Technologies ◽  
Consumer Preferences ◽  
Autonomous Vehicle ◽  
Developed Countries ◽  
Automotive Market ◽  
Advantages And Disadvantages ◽  
Autonomous Cars ◽  
The Impact

New technologies reaching out for meeting the needs of an aging population in developed countries have given rise to the development and gradual implementation of the concept of an autonomous vehicle (AV) and have even made it a necessity and an important business paradigm. However, in parallel, there is a discussion about consumer preferences and the willingness to pay for new car technologies and intelligent vehicle options. The main aim of the study was to analyze the impact of selected factors on the perception of the future of autonomous cars by respondents from the area of Southeastern Poland in terms of a comparison with traditional cars, with particular emphasis on the advantages and disadvantages of this concept. The research presented in this study was conducted in 2019 among a group of 579 respondents. Data analysis made it possible to identify potential advantages and disadvantages of the concept of introducing autonomous cars. A positive result of the survey is that 68% of respondents stated that AV will be gradually introduced to our market, which confirms the high acceptance of this technology by Poles. The obtained research results may be valuable information for governmental and local authorities, but also for car manufacturers and their future users. It is an important issue in the area of shaping the strategy of actions concerning further directions of development on the automotive market.

Teachers' Attitudes Towards the Use of Tablets in Six EFL Classrooms

2020 ◽  
pp. 284-298
Author(s):  
Aysegul Liman Kaban ◽  
Isil Boy Ergul
Keyword(s):  
Primary School ◽  
New Technologies ◽  
Educational Institutions ◽  
Structured Interviews ◽  
Factors Affecting ◽  
Advantages And Disadvantages ◽  
Efl Teachers ◽  
Efl Classrooms ◽  
Teachers Attitudes

This research study intends to explore teachers' use of tablets to in six EFL classrooms. The case study covers one private primary school in Istanbul, Turkey. Through the analysis of semi-structured interviews, the aim is to find out the factors affecting EFL teachers use of tablets, their attitudes towards using these devices, and the advantages and disadvantages they see in using tablets in their teaching. The study focuses on teachers' perspective as they are by and large ignored when it comes to the introduction of new technologies in educational institutions.

Evaluating the impact of climate change on offshore structures design: A practical case study

2020 ◽  
Vol 94 ◽  
pp. 101992
Author(s):  
I.A. Mosquera-Mosquera ◽  
Marina L. Simão ◽  
Paulo M. Videiro ◽  
Luis V.S. Sagrilo
Keyword(s):  
Climate Change ◽  
Offshore Structures ◽  
Practical Case ◽  
Impact Of Climate Change ◽  
The Impact

scholarly journals Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

2015 ◽  
Vol 49 (3) ◽  
pp. 488-494 ◽  
Author(s):  
Mariana Fexina Tomé ◽  
Antônio Fernandes Costa Lima
Keyword(s):  
Human Resources ◽  
Direct Cost ◽  
Financial Resources ◽  
Average Total Cost ◽  
Descriptive Case Study ◽  
Total Cost ◽  
Advantages And Disadvantages ◽  
Cost Of Materials ◽  
The Cost

OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$) originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%). It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%). CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

scholarly journals At the Epicenter of COVID-19–the Tragic Failure of the Global Supply Chain for Medical Supplies

2020 ◽  
Vol 8 ◽  
Author(s):  
Sonu Bhaskar ◽  
Jeremy Tan ◽  
Marcel L. A. M. Bogers ◽  
Timo Minssen ◽  
Hishamuddin Badaruddin ◽  
...  
Keyword(s):  
Supply Chain ◽  
Supply Chains ◽  
Production Efficiency ◽  
New Technologies ◽  
Health Workers ◽  
Global Supply Chain ◽  
Governance System ◽  
Current Crisis ◽  
The Face ◽  
The Impact

The tragic failure of the global supply chain in the face of the current coronavirus outbreak has caused acute shortages of essential frontline medical devices and personal protective equipment, crushing fear among frontline health workers and causing fundamental concerns about the sustainability of the health system. Much more coordination, integration, and management of global supply chains will be needed to mitigate the impact of the pandemics. This article describes the pressing need to revisit the governance and resilience of the supply chains that amplified the crisis at pandemic scale. We propose a model that profiles critical stockpiles and improves production efficiency through new technologies such as advanced analytics and blockchain. A new governance system that supports intervention by public-health authorities during critical emergencies is central to our recommendation, both in the face of the current crisis and to be better prepared for potential future crises. These reinforcements offer the potential to minimize the compromise of our healthcare workers and health systems due to infection exposure and build capacity toward preparedness and action for a future outbreak.

Research on Supply Chain Profit Coordination Mechanism Based on JIT Lot-Splitting

2013 ◽  
Vol 694-697 ◽  
pp. 3466-3471
Author(s):  
Qin Lv
Keyword(s):  
Supply Chain ◽  
Cost Saving ◽  
Bargaining Power ◽  
Simulation Analysis ◽  
Coordination Mechanism ◽  
Two Stage ◽  
Total Cost ◽  
Lot Splitting ◽  
The Impact ◽  
Stackelberg Leader

A supply chain profit coordination mechanism based on JIT lot-splitting, which involves a two stage supply chain consisted of a supplier and a buyer, is discussed. Based on the bargaining power of supplier, the profit coordination with and without incentives are respectively explored. For the total cost minimizations of buyer and supplier separately, two stage stackelberg leader-follower game models, in which buyer is the leader and supplier is the follower, are established. Supplier applies JIT delivery to reduce buyer’s cost and the total cost of the supply chain via dividing buyer’s order per batch into some batches to deliver. Finally, a numerical example and a simulation analysis are given and the impact of the variation of relative parameters on the total cost saving of buyer, supplier and system is discussed. In addition, the efficiency of game decision on the basis of JIT lot-splitting is proved.

On the Applicability of Analytical Supply Chain Disruption Models for Selecting the Optimum Contingency Strategies for Electronic Supply Chain Disruption Management: A Comparison With Simulation

2014 ◽  
Author(s):  
Hannah Allison ◽  
Peter Sandborn ◽  
Bo Eriksson
Keyword(s):  
Supply Chain ◽  
Mitigation Strategy ◽  
Mitigation Strategies ◽  
Analytical Models ◽  
Supply Chain Disruption ◽  
Simulation Based ◽  
Disruption Mitigation ◽  
The Impact ◽  
Selection Of

Due to the nature of the manufacturing and support activities associated with long life cycle products, the parts that products required need to be dependably and consistently available. However, the parts that comprise long lifetime products are susceptible to a variety of supply chain disruptions. In order to minimize the impact of these unavoidable disruptions to production, manufacturers can implement proactive mitigation strategies. Two mitigation strategies in particular have been proven to decrease the penalty costs associated with disruptions: second sourcing and buffering. Second sourcing involves selecting two distinct suppliers from which to purchase parts over the life of the part’s use within a product or organization. Second sourcing reduces the probability of part unavailability (and its associated penalties), but at the expense of qualification and support costs for multiple suppliers. An alternative disruption mitigation strategy is buffering (also referred to as hoarding). Buffering involves stocking enough parts in inventory to satisfy the forecasted part demand (for both manufacturing and maintenance requirements) for a fixed future time period so as to offset the impact of disruptions. Careful selection of the mitigation strategy (second sourcing, buffering, or a combination of the two) is key, as it can dramatically impact a part’s total cost of ownership. This paper studies the effectiveness of traditional analytical models compared to a simulation-based approach for the selection of an optimal disruption mitigation strategy. A verification case study was performed to check the accuracy and applicability of the simulation-based model. The case study results show that the simulation model is capable of replicating results from operations research models, and overcomes significant scenario restrictions that limit the usefulness of analytical models as decision-making tools. Four assumptions, in particular, severely limit the realism of most analytical models but do not constrain the simulation-based model. These limiting assumptions are: 1) no fixed costs associated with part orders, 2) infinite-horizon, 3) perfectly reliable backup supplier, and 4) disruptions lasting full ordering periods (as opposed to fractional periods).

scholarly journals Redesigning the Municipal Solid Waste Supply Chain Considering the Classified Collection and Disposal: A Case Study of Incinerable Waste in Beijing

2021 ◽  
Vol 13 (17) ◽  
pp. 9855
Author(s):  
Xiaoyu Yang ◽  
Xiaopeng Guo ◽  
Kun Yang
Keyword(s):  
Supply Chain ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Treatment ◽  
Allocation Model ◽  
Treatment Situation ◽  
Waste Storage ◽  
Function Allocation ◽  
The Impact

The output of municipal solid waste is growing rapidly, which has brought tremendous pressure to urban development. The supply chain of municipal solid waste (MSW) in China mainly contains three processes: collection, transportation, and disposal. The waste is sorted at the collection and disposed of according to the classification. However, it is mixed at the transportation stage. Mixed transportation remixes the separately collected waste, which seriously affects the disposal effect. The supply chain of MSW urgently needs to be redesigned to improve the MSW disposal effect. First of all, on the ground of the waste treatment situation, we redesigned the supply chain of MSW in China. Secondly, combined with the redesign of the MSW supply chain, this paper established the function allocation model for collection stations, making a collection station only gather one type of waste, and built the transportation path planning model for vehicles, reducing the impact of waste storage on residents. Finally, based on the data of Xuanwu District in Beijing, the supply chain redesigning practical example of incinerable waste was given. The supply chain redesigning model in this paper not only makes full use of the existing infrastructure but also improves the disposal effect of waste. The supply chain redesigning model has practical application value.

Sign in / Sign up

Export Citation Format

Share Document