scholarly journals Composition, Digestibility, and Microbiological Quality of the Animal-Origin Meal

2020 ◽  
Vol 8 (1) ◽  
pp. 424
Author(s):  
Julia Marixara Sousa da Silva ◽  
Christiane Silva Souza ◽  
Alison Batista Vieira Silva Gouveia ◽  
Weslane Justina da Silva ◽  
Lorrayne Moraes de Paulo ◽  
...  
Keyword(s):  
Amino Acids ◽  
Raw Materials ◽  
Microbiological Quality ◽  
Metabolizable Energy ◽  
Production Costs ◽  
Grain Size Analysis ◽  
Animal Origin ◽  
Size Analysis ◽  
Salmonella Spp

There is currently a growing interest of animal nutritionists and farmers in the use of by-products and/or agro-industrial residues in feeds. The purpose is to reduce production costs, since feed represents nearly 70% of the cost of production, as well as to allocate waste properly, minimizing potential environmental impacts. The characteristics of the residues used and their physical and/ or chemical limitations should be known, providing nutritionist with the correct information for the best choice and use of these ingredients for animal nutrition. This study aims to characterize the centesimal and energetic composition, digestibility, and microbiological quality of animal-origin meals in non-ruminant feeds. Samples of animal-origin meals – AOM (n=210), hydrolyzed feather meals (n=70), chicken offal meal (n=70), and pig offal meal (n=70) were evaluated. The following variables were determined: moisture, crude protein, amino acids, ethereal extract, ash content, FAO grain size analysis, and protein digestibility. Peroxide and acidity levels were determined to evaluate the oxidative process. The microbiological quality of AOM evaluated by the presence/absence of Salmonella spp.; the apparent metabolizable energy was verified by the indirect method using prediction equations. The amounts of proteins, minerals, amino acids, and energy differed from those reported in the literature. These results were possibly due to the different operational processes performed in each one of the experiments, as well as the proportions of constituents in the compared raw materials compared. Moreover, we observed that the AOM is within the Brazilian hygienic-sanitary standards.

scholarly journals Assessment of Clay Deposits Quality from East of Erbil, Kurdistan Region, Iraq for some Ceramic Industries

2021 ◽  
Vol 54 (2F) ◽  
pp. 145-161
Author(s):  
Aveen Ali Surdashy ◽  
Ahmed Mohammed Aqrawi
Keyword(s):  
Physical Properties ◽  
Raw Materials ◽  
Grain Size Analysis ◽  
Size Analysis ◽  
X Ray Diffraction ◽  
Clay Deposits ◽  
Geochemical Study ◽  
Ceramic Manufacturing ◽  
Calcium Iron

For the assessment of clay deposits for brick manufacturing, seven clay samples from different locations were collected by channel sampling method from Injana, Mukdadiyah, Bai Hassan formations and Quaternary deposits in Bestana village, the study area is located east of Erbil city (NE Iraq). For ceramic manufacturing, the quality of clay should be measured according to some physical properties. The mineralogical and geochemical study revealed by using X-ray diffraction and chemical characteristics, which represented that all clay samples containing; kaolinite, smectite, illite, and chlorite with some mixed clay and non-clay mineral quartz, calcite, dolomite, and feldspar. The physical properties of clay samples including grain size analysis and Atterberg limits showed that the raw materials contain clay in high proportion, silt in medium proportion, and sand in minor proportion. Plasticity index of the studied samples showed that they are moderately plastic to plastic range. The geochemical analysis of the studied samples showed that the clay raw materials are composed mainly of silica and alumina, which act as refractory material in the ceramic industry. In addition to that, there are different proportions of calcium, iron oxides, magnesium, potassium, and sodium, which are flux oxides.

Microbiological Quality of Burrata Cheese Produced in Puglia Region: Southern Italy

2013 ◽  
Vol 76 (11) ◽  
pp. 1981-1984 ◽  
Author(s):  
ANGELA DAMBROSIO ◽  
NICOLETTA CRISTIANA QUAGLIA ◽  
MARA SARACINO ◽  
MARIA MALCANGI ◽  
COSIMO MONTAGNA ◽  
...  
Keyword(s):  
Antimicrobial Resistance ◽  
Southern Italy ◽  
Raw Materials ◽  
Microbiological Quality ◽  
Food Product ◽  
Staphylococcal Enterotoxin ◽  
Salmonella Spp ◽  
Negative Results ◽  
Resistance Patterns

Burrata cheese is a popular typical Italian food product, produced in Puglia (an administrative region of southern Italy), and this study investigated the microbiological quality of 404 samples of this cheese. The samples were analyzed in order to quantify Escherichia coli and to detect the presence of Staphylococcus aureus, Salmonella spp., and Listeria monocytogenes. No sample exceeded the values of E. coli set by EC Regulation 1441/07 for some dairy products, while 15 (3.7%) samples tested coagulase-positive staphylococci positive, with values greater than 103 CFU/g. One strain of S. aureus was identified and characterized from each of these positive samples, and of these strains, 7 (46.6%) produced staphylococcal enterotoxin A, 5 (33.3%) produced staphylococcal enterotoxin C, 2 (13.3%) produced staphylococcal enterotoxin D, and 1 (6.6%) produced both staphylococcal enterotoxins A and D. All strains were mecA negative. The 15 S. aureus isolates were tested for their antimicrobial resistance patterns, and all analyzed strains showed antimicrobial resistance properties for at least one of the tested antibiotics. Testing for the other pathogens mentioned above gave negative results. The results of our study mean that the microbiological quality of Burrata cheese can be assumed to be good, although care must be taken with raw materials and good hygiene during processing in order to guarantee greater food safety.

Impact of Raw Materials and Processing Techniques on The Microbiological Quality of Egyptian Domiati Cheese

2020 ◽  
Keyword(s):  
Raw Materials ◽  
Microbiological Quality ◽  
Raw Milk ◽  
Plate Count ◽  
E Coli ◽  
Fresh Cheese ◽  
Processing Techniques ◽  
The Impact ◽  
Total Yeast

Domiati cheese is the most popular brand of cheese ripened in brine in the Middle East in terms of consumed quantities. This study was performed to investigate the impact of the microbiological quality of the used raw materials, the applied traditional processing techniques and ripening period on the quality and safety of the produced cheese. Three hundred random composite samples were collected from three factories at Fayoum Governorate, Egypt. Collected samples represent twenty-five each of: raw milk, table salt, calf rennet, microbial rennet, water, environmental air, whey, fresh cheese, ripened cheese & swabs from: worker hands; cheese molds and utensils; tanks. All samples were examined microbiologically for Standard Plate Count (SPC), coliforms count, Staphylococcus aureus (S. aureus) count, total yeast & mould count, presence of E. coli, Salmonellae and Listeria monocytogenes (L. monocytogenes). The mean value of SPC, coliforms, S. aureus and total yeast & mould counts ranged from (79×102 CFU/m3 for air to 13×108 CFU/g for fresh cheese), (7×102 MPN/ cm2 for tank swabs to 80×106 MPN/ml for raw milk), (9×102 CFU/g for salt to 69×106 CFU/g for fresh cheese) and (2×102 CFU/cm2 for hand swabs to 60×104 CFU/g for fresh cheese), respectively. Whereas, E. coli, Salmonella and L. monocytogenes failed to be detected in all examined samples. There were significant differences in all determined microbiological parameters (p ≤0.05) between fresh and ripened cheese which may be attributed to different adverse conditions such as water activity, pH, salt content and temperature carried out to improve the quality of the product.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

Compound feed from different producers for piglets and their comparative assessment

2021 ◽  
pp. 3-12
Author(s):  
N. I. Kulmakova ◽  
T. A. Magomadov ◽  
N. M. Kostomakhin ◽  
M. N. Dmitrieva ◽  
H. Saleh
Keyword(s):  
Raw Materials ◽  
Comparative Assessment ◽  
Feed Additives ◽  
The Body ◽  
Animal Origin ◽  
Quality And Safety ◽  
Processing Technologies ◽  
Starting Compound ◽  
Federal Standard

The quality of raw materials and goods of animal origin depends first of all on the safety of feed, their balance in terms of the main nutrients and digestibility by the body. As a rule, the lower the quality and safety of feed, the lower the productivity of all types of animals and poultry. The quality of feed is influenced by all stages of their production: growing conditions, harvesting and storage, processing technologies, canning and preparation for feeding. Where high-quality feed is used in diets, maximum productivity and high realization of the genetic potential of animals are obtained. During the storage and processing of plant and animal raw materials its physic and mechanical, biochemical, sanitary and microbiological properties change. This can be avoided only by observing the sanitary and hygienic requirements for bagging, harvesting, and storing feed. The quality of feed is confirmed by its physical, chemical, organoleptic, microbiological and other indicators, which determines the variety of feed control methods at all stages of their turnover. In this connection, the development and strengthening of control over the quality and safety of feed and feed additives is one of the important tasks of modern animal feeding science. The purpose of the work was to carried out a comparative assessment of four samples of the starting compound feed SK-3 for piglets of different producers. The experimental part of the work has been carried out in the laboratory of veterinary expertise at the compound feed plant LLC “Athens-Volga”. For the study of compound feed an average sample was taken from each sample, separating from the combined sample using a hand scoop according to Federal standard 13496.0-2016. Methods of sampling. Quality and safety control was carried out according to organoleptic, physic and chemical, microbiological indicators and the content of mycotoxins in compound feed. Monitoring of compound feed of the compared samples of the starting compound feed for piglets SK-3 according to the studied indicators has shown that all samples meet the sanitary and hygienic requirements of Federal standard of our country.

scholarly journals Assessment of the microbiological quality of popular food items on sale in secondary school canteens of Mauritius

2019 ◽  
Vol 8 (1) ◽  
Author(s):  
Dayawatee Goburdhun ◽  
Mahima D. Beeharry ◽  
Keshnee Reega ◽  
Arvind Ruggoo ◽  
Hudaa Neetoo
Keyword(s):  
Secondary School ◽  
Microbiological Quality ◽  
Viable Count ◽  
Food Type ◽  
Salmonella Spp ◽  
E Coli ◽  
High Level ◽  
Microbiological Analyses ◽  
Composite Samples

This study was carried out to assess the microbiological status of three hot meals served in eight selected school canteens of Mauritius, with two schools randomly selected from each of the four school zones of the island. Three individual samples of farata, panini, or fried noodles were collected at each school during two independent visits. The three individual samples of each food type collected during each visit were then pooled before being subjected to microbiological analyses. A total of 48 composite samples were analyzed. The parameters tested were Total Viable Count (TVC), Escherichia coli, Salmonella spp., Clostridium perfringens, Staphylococcus aureus, and Listeria spp. The microbiological analyses revealed that paninis were deemed as generally acceptable with TVC falling in the range of 3.0-5.7 Log CFU/g and undetectable levels of S. aureus and E. coli. In contrast, fried noodles and faratas harboured a moderately high level of TVC (4.4-6.7 Log CFU/g) and objectionably high levels S. aureus (3.1 to 5.0 Log CFU/g) and E. coli (3.1-5.1 Log CFU/g) for seven out of the eight schools.

scholarly journals Tokat Bez Sucuğunun Mikrobiyolojik Kalitesinin İncelenmesi

2020 ◽  
Vol 8 (12) ◽  
pp. 2683-2694
Author(s):  
Nesrin Kaval ◽  
Nilgün Öncül ◽  
Zeliha Yıldırım
Keyword(s):  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
Fecal Coliform ◽  
Microbiological Quality ◽  
Total Coliform ◽  
Aerobic Bacteria ◽  
Escherichia Coli O157 ◽  
Salmonella Spp ◽  
Microbiological Parameters

In this study, the microbiological quality of traditionally produced Bez Sucuk in Tokat and its vicinity was investigated. For this purpose, 30 Bez Sucuk samples obtained from butchers, producers of Bez Sucuk, were analyzed for total count of mesophilic aerobic bacteria, lactic acid bacteria, yeasts-moulds, total coliform, fecal coliform, Staphylococcus aureus, Bacillus cereus, and Cl. perfringens. Also, the presence of Escherichia coli O157:H7, Listeria monocytogenes and Salmonella spp. were investigated in all samples. pH and water activity of the samples were determined. As the result of the analysis, the counts of the microbiological parameters investigated were found as follows: total mesophilic aerobic bacteria 3.5×106-4.23×109 CFU/g, lactic acid bacteria 5.55×105-2.45×109 CFU/g, yeasts and moulds 2.50×103-6.90×109 CFU/g, total coliform

scholarly journals EVOLUÇÃO DA QUALIDADE MICROBIOLÓGICA DE QUEIJO MINAS FRESCAL COMERCIALIZADO EM CURITIBA (PR) NO INTERVALO DE 10 ANOS (1999 E 2009) Assessment of the microbiological quality of Minas frescal cheese commercialized in the city of Curitiba, Parana State, Brazil at 10 years’ interval (1999 and 2009)

2012 ◽  
Vol 10 (3) ◽  
pp. 243 ◽  
Author(s):  
Hanna Lethycia Wolupeck ◽  
Helen Caroline Raksa ◽  
Luciane Silvia Rossa ◽  
Raquel Biasi ◽  
Renata Ernlund Freitas de Macedo
Keyword(s):  
Escherichia Coli ◽  
Microbiological Quality ◽  
Salmonella Spp ◽  
E Coli ◽  
The City

O queijo Minas frescal é um dos mais populares do Brasil, porém o alto teor de umidade associado ao métodode processamento, muitas vezes artesanal, e de armazenamento desse produto o tornam muito perecível.Este trabalho teve como objetivo avaliar e comparar a qualidade microbiológica de queijo Minas frescalcomercializado na cidade de Curitiba (PR) nos anos de 1999 e 2009, verificando a evolução na qualidadehigiênico-sanitária desse produto no período de 10 anos. Foram analisadas 11 marcas comerciais de queijo Minas frescal disponíveis no comércio varejista da cidade de Curitiba, sendo amostradas cinco unidades de cada marca, totalizando 55 amostras. Os queijos foram submetidos à pesquisa de Salmonella spp., contagem de coliformes totais e Escherichia coli, contagem de Staphylococcus coagulase positiva e contagem de aeróbios mesófilos, com resultados expressos em UFC/g. Das 55 amostras de queijo, 41,82% e 78,18% apresentaram contagem de E. coli e de coliformes totais acima do limite permitido, respectivamente. Somente uma amostra (1,82%) do total avaliado mostrou-se em desacordo com os padrões para S. coagulase positiva e uma para Salmonella spp. Ambas as amostras foram adquiridas em 2009. Todas as amostras avaliadas em 2009 apresentaram elevada contagem de aeróbios mesófilos, revelando alta carga microbiana. Comparativamente, os queijos avaliados em 1999 mostraram qualidade microbiológica superior aos queijos avaliados em 2009 (p < 0,05). Destes, 100% apresentaram no mínimo um parâmetro microbiológico em desacordo com a legislação vigente, indicando que a qualidade dos queijos Minas frescal avaliados em 2009 apresentou-se inferior a dos queijos avaliados em 1999.

scholarly journals Microbial quality of linseed and fibre hemp plants during growing and harvest seasons

2008 ◽  
Vol 13 (4) ◽  
pp. 327 ◽  
Author(s):  
M. KOIVULA ◽  
H-R. KYMÄLÄINEN ◽  
L. VANNE
Keyword(s):  
Cannabis Sativa ◽  
Raw Materials ◽  
Microbiological Quality ◽  
Growing Season ◽  
Plate Count ◽  
Production Chain ◽  
Growing Seasons ◽  
Linum Usitatissimum L ◽  
Microbiological Analyses

Linseed (Linum usitatissimum L.) and fi bre hemp (Cannabis sativa L.) can be used as raw materials in various applications. In this study, microbiological quality and meteorological measurements were made during the growing seasons and harvesting periods of 2001 and 2002. The microbiological analyses were carried out with Hygicult® TPC and Y&F dipslides, and with a surface spreading method using Plate Count and Potato Dextrose agars. During the growing season of 2001 the conditions were mostly humid, whereas the growing season of 2002 was rather dry and warmer than that of 2001. The lack of water during the growing season of 2002 affected the growth of the plants. In the case of both hemp and fl ax, the mould and bacterial contents (cfu gdw-1) increased markedly at the end of the growing season of 2001. During the growing season of 2002 the increase in mould and bacterial contents was noticeable but more constant throughout the whole growing season. At the end of the growing seasons, the mould and bacteria contents were higher in 2001 than in 2002. The genera of moulds identifi ed included Cladosporium, Fusarium, Penicillium, Mucor and Alternaria. The microbiological safety should be controlled during the whole production chain, beginning with the cultivation and harvesting periods.;

Sign in / Sign up

Export Citation Format

Share Document