scholarly journals Implementasi Metode TOPSIS untuk Rekomendasi dalam Menentukan Pengadaan Barang pada PT. Sentra Kemika Persada

2020 ◽  
Vol 6 (2) ◽  
pp. 88
Author(s):  
Steven ◽  
Vincent Setiawan ◽  
Halim Agung
Keyword(s):  
Real Time ◽  
Error Rate ◽  
Approximate Calculation ◽  
Accuracy Rate ◽  
The Future ◽  
A Company

PT. Sentra Kemika Persada is a company engaged in chemicals. PT. Sentra Kemika Persada is one of the importers and distributors of chemicals in Indonesia. So far, the decision to procure chemical goods at PT. Sentra Kemika Persada is still done manually, which is only by estimating the need for procurement of goods in the future without a clear or approximate calculation. In addition, checking the stock in the warehouse is still done manually, so it is difficult to get real time inventory reports and determine when PT. Sentra Kemika Persada must procure chemicals. The algorithm used in this study is TOPSIS with an accuracy rate of 75% and an error rate of 25%

Techniques of Viral Marketing

2019 ◽  
Vol 118 (6) ◽  
pp. 97-99
Author(s):  
Arockia Jeyasheela A ◽  
Dr.S. Chandramohan
Keyword(s):  
Social Media ◽  
Real Time ◽  
Word Of Mouth ◽  
Viral Marketing ◽  
Consumer Perception ◽  
Key Word ◽  
The Right ◽  
A Company

This study is discussed about the viral marketing. It is a one of the key success of marketing. This paper gave the techniques of viral marketing. It can be delivered word of mouth. It can be created by both the representatives of a company and consumer (individuals or communities). The right viral message with go to right consumer to the right time. Viral marketing is easy to attract the consumer. It is most important advertising to consumer. It involves consumer perception, organization contribution, blogs, SMO (Social Media Optimize), SEO (Social Engine Optimize). Principles of viral marketing are social profile gathering, Proximity Market, Real time Key word density.

scholarly journals A palace fit for the future: Desirability in temporal work

2021 ◽  
pp. 147612702110120
Author(s):  
Siavash Alimadadi ◽  
Andrew Davies ◽  
Fredrik Tell
Keyword(s):  
Real Time ◽  
Crucial Role ◽  
The Past ◽  
Renewal Program ◽  
The Future ◽  
Depth Study ◽  
Future Events ◽  
Future Outcomes ◽  
Pluralistic Contexts

Research on the strategic organization of time often assumes that collective efforts are motivated by and oriented toward achieving desirable, although not necessarily well-defined, future states. In situations surrounded by uncertainty where work has to proceed urgently to avoid an impending disaster, however, temporal work is guided by engaging with both desirable and undesirable future outcomes. Drawing on a real-time, in-depth study of the inception of the Restoration and Renewal program of the Palace of Westminster, we investigate how organizational actors develop a strategy for an uncertain and highly contested future while safeguarding ongoing operations in the present and preserving the heritage of the past. Anticipation of undesirable future events played a crucial role in mobilizing collective efforts to move forward. We develop a model of future desirability in temporal work to identify how actors construct, link, and navigate interpretations of desirable and undesirable futures in their attempts to create a viable path of action. By conceptualizing temporal work based on the phenomenological quality of the future, we advance understanding of the strategic organization of time in pluralistic contexts characterized by uncertainty and urgency.

Reducing Culture Reporting Errors in the Microbiology Laboratory

2019 ◽  
Vol 152 (Supplement_1) ◽  
pp. S131-S132
Author(s):  
Kathryn Hogan ◽  
Beena Umar ◽  
Mohamed Alhamar ◽  
Kathleen Callahan ◽  
Linoj Samuel
Keyword(s):  
Real Time ◽  
Error Rate ◽  
Reporting System ◽  
Error Rates ◽  
Tracking Errors ◽  
Corrective Measures ◽  
Safety Awareness ◽  
Before And After ◽  
Set Up ◽  
System Errors

Abstract Objectives There are few papers that characterize types of errors in microbiology laboratories and scant research demonstrating the effects of interventions on microbiology lab errors. This study aims to categorize types of culture reporting errors found in microbiology labs and to document the error rates before and after interventions designed to reduce errors and improve overall laboratory quality. Methods To improve documentation of error incidence, a self-reporting system was changed to an automatic reporting system. Errors were categorized into five types Gram stain (misinterpretations), identification (incorrect analysis), set up labeling (incorrect patient labels), procedures (not followed), and miscellaneous. Error rates were tracked according to technologist, and technologists were given real-time feedback by a manager. Error rates were also monitored in the daily quality meeting and frequently detected errors were discussed at staff meetings. Technologists attended a year-end review with a manager to improve their performance. To maintain these changes, policies were developed to monitor technologist error rate and to define corrective measures. If a certain number of errors per month was reached, technologists were required to undergo retraining by a manager. If a technologist failed to correct any error according to protocol, they were also potentially subject to corrective measures. Results In 2013, we recorded 0.5 errors per 1,000 tests. By 2018, we recorded only 0.1 errors per 1,000 tests, an 80% decrease. The yearly culture volume from 2013 to 2018 increased by 32%, while the yearly error rate went from 0.05% per year to 0.01% per year, a statistically significant decrease (P = .0007). Conclusion This study supports the effectiveness of the changes implemented to decrease errors in culture reporting. By tracking errors in real time and using a standardized process that involved timely follow-up, technologists were educated on error prevention. This practice increased safety awareness in our micro lab.

The Future of Real-Time Security

2015 ◽  
Vol 14 (3) ◽  
pp. 1-18 ◽  
Author(s):  
Aydin Aysu ◽  
Bilgiday Yuce ◽  
Patrick Schaumont
Keyword(s):  
Real Time ◽  
The Future

An Advanced Ultra-Deep Resistivity Mapping Sensor Reduced Reservoir Uncertainty and Eliminated the Need for a Pilot Hole for the First Time; A Case Study from Offshore Abu Dhabi

2021 ◽  
Author(s):  
Wael Fares ◽  
Islam Moustafa ◽  
Ali Al Felasi ◽  
Hocine Khemissa ◽  
Omar Al Mutwali ◽  
...  
Keyword(s):  
Real Time ◽  
Water Saturation ◽  
Firing Frequency ◽  
Target Zones ◽  
The Real ◽  
Pilot Hole ◽  
Low Resistivity ◽  
Milling Operations ◽  
The Future ◽  
Identify Formation

Abstract The high reservoir uncertainty, due to the lateral distribution of fluids, results in variable water saturation, which is very challenging in drilling horizontal wells. In order to reduce uncertainty, the plan was to drill a pilot hole to evaluate the target zones and plan horizontal sections based on the information gained. To investigate the possibility of avoiding pilot holes in the future, an advanced ultra-deep resistivity mapping sensor was deployed to map the mature reservoirs, to identify formation and fluid boundaries early before penetrating them, avoiding the need for pilot holes. Prewell inversion modeling was conducted to optimize the spacing and firing frequency selection and to facilitate an early real-time geostopping decision. The plan was to run the ultra-deep resistivity mapping sensor in conjunction with shallow propagation resistivity, density, and neutron porosity tools while drilling the 8 ½-in. landing section. The real-time ultra-deep resistivity mapping inversion was run using a depth of inversion up to 120 ft., to be able to detect the reservoir early and evaluate the predicted reservoir resistivity. This would allow optimization of any geostopping decision. The ultra-deep resistivity mapping sensor delivered accurate mapping of low resistivity zones up to 85 ft. TVD away from the wellbore in a challenging low resistivity environment. The real-time ultra-deep resistivity mapping inversion enabled the prediction of resistivity values in target zones prior to entering the reservoir; values which were later crosschecked against open-hole logs for validation. The results enabled identification of the optimal geostopping point in the 8 ½-in. section, enabling up to seven rig days to be saved in the future by eliminating a pilot hole. In addition this would eliminate the risk of setting a whipstock at high inclination with the subsequent impact on milling operations. In specific cases, this minimizes drilling risks in unknown/high reservoir pressure zones by improving early detection of formation tops. Plans were modified for a nearby future well and the pilot-hole phase was eliminated because of the confidence provided by these results. Deployment of the ultra-deep resistivity mapping sensor in these mature carbonate reservoirs may reduce the uncertainty associated with fluid migration. In addition, use of the tool can facilitate precise geosteering to maintain distance from fluid boundaries in thick reservoirs. Furthermore, due to the depths of investigation possible with these tools, it will help enable the mapping of nearby reservoirs for future development. Further multi-disciplinary studies remain desirable using existing standard log data to validate the effectiveness of this concept for different fields and reservoirs.

Research and Implementation of Face Detection Based on OpenCV

2014 ◽  
Vol 971-973 ◽  
pp. 1710-1713
Author(s):  
Wen Huan Wu ◽  
Ying Jun Zhao ◽  
Yong Fei Che
Keyword(s):  
Face Recognition ◽  
Detailed Analysis ◽  
Real Time ◽  
Face Detection ◽  
Recognition System ◽  
Detection Algorithm ◽  
High Accuracy ◽  
Accuracy Rate ◽  
Face Recognition System ◽  
The Face

Face detection is the key point in automatic face recognition system. This paper introduces the face detection algorithm with a cascade of Adaboost classifiers and how to configure OpenCV in MCVS. Using OpenCV realized the face detection. And a detailed analysis of the face detection results is presented. Through experiment, we found that the method used in this article has a high accuracy rate and better real-time.

scholarly journals ANALISIS PENGARUH ASPEK KEPERILAKUAN TERHADAP SISTEM AKUNTANSI (STUDI KASUS PADA PT. SINAR GALESONG PRIMA DI MANADO)

2017 ◽  
Vol 12 (2) ◽  
Author(s):  
Wulan Mogontha ◽  
Grace B. Nangoi ◽  
Natalia Gerungai
Keyword(s):  
Decision Making ◽  
Linear Regression ◽  
Multiple Linear Regression ◽  
Human Behavior ◽  
Accounting System ◽  
Behavioral Accounting ◽  
Trading Company ◽  
Behavioral Aspect ◽  
The Future ◽  
A Company

Accounting is information or, to be specific, accounting system. Accounting  System has important role in a company where the success of an accounting system depends on the human behavior as respond giving user. Therefore, there should be a necessary consideration regarding behavioral aspect in running an accounting system whereas be behavioral accounting is focusing on accountant’s and auditor’s decision making wether the system is run according to the company’s procedure and their objective as well. This research is aimed to analize the effect of behavioral aspect on accounting system run by PT Sinar Galesong Prima in Manado as a trading company. The method of analysis applied is multiple linear regression. The result of the conducted research shows that behavioral aspect (Attitude, Motivation, Perseption, Emotion) is not significantly affected the accounting system run by the company. It is expected that the company would give more concern, particularly to the behavioral aspect in applying the existing system so that in the future, the accounting system in the company could run effectively and efficiently according to the company’s objective.Keywords : Accounting System, Behavioral Accounting, Attitude, Motivation, Perpseption, Emotion.

scholarly journals MENEJMEN RISIKO DALAM PERFEKTIF ISLAM

2017 ◽  
Vol 5 (1) ◽  
Author(s):  
Supriyo Supriyo
Keyword(s):  
Risk Management ◽  
Production System ◽  
Human Life ◽  
Short Term ◽  
Islamic Perspective ◽  
The Family ◽  
The Future ◽  
Short Run ◽  
A Company

Human life with all its activities in order to meet the needs of life always will always faced the possibility of risk either directly or indirectly, can occur in the short term or long term. A possibility of the occurrence or risk had certainly will affect the activity to be done And adversely affect the economy of a family and even a company, if the risks that occur have a vital impact on the family or an organization. Many failures within a company's organization are due to unforeseen risks occurring as for example the company never thinks that a newly established company is still in the short run abruptly because a workforce lacking control in the production system creates a great fire and spends all and has a bad impact For the economy of a family and even a company, if the risks that occur have a vital impact on the family or an organization. Many failures within a company's organization are due to unforeseen risks occurring as for example the company never thinks that a newly established company is still in the short run abruptly because a workforce lacking control in the production system creates a terrible fire and consumes all the company's assets Newly established. Everyone or anyone else would not want the incident to happen and befall themselves and his business in the future. Keywords: Islamic perspective, Risk management

scholarly journals Dokter Tunggu, A Hospital Application for Patient of Healthcare and Social Security Agency

2021 ◽  
Vol 8 (8) ◽  
pp. 450-458
Author(s):  
Muhammad Riyadi ◽  
Rhian Indradewa ◽  
Tantri Yanuar Rahmat Syah
Keyword(s):  
Social Security ◽  
Real Time ◽  
Health Facilities ◽  
Referral Hospital ◽  
Capital City ◽  
Business Planning ◽  
Level I ◽  
A Company ◽  
Social Security Agency

PT. Zaps Technology is a company engaged in technology and information by producing application products with the name Dokter Tunggu (Doku). The application was created to eliminate queues that often occur in Healthcare and Social Security Agency patient services at level I Hospitals and Health Facilities. Place of company at Bekasi Jawa Barat, The location is said to be chosen because Bekasi is one of the supporting areas for the capital city and has a variety of complete business facilities. This company's strategy is to create innovations in Healthcare and Social Security Agency patient services where the application made has various features that are able to eliminate queues. The application has an online referral menu on the application so that Hospitals, Level I Facilities and Healthcare and Social Security Agency patients are easier to take advantage of BPJS services. The waiting doctor application will display real time conditions at the referral hospital so that BPJS users can monitor the condition of BPJS services at the destination Hospital. Keywords: Dokter Tunggu, Hospital, Online Sevice, Business Planning.

Sign in / Sign up

Export Citation Format

Share Document