EXTRACTION OPTIMIZATION OF THREE INDEPENDENT VARIABLES OF ANTIOXIDANTS FROM BASIL LEAVES USING RESPONSE SURFACE METHODOLOGY

INDIAN DRUGS ◽  
2020 ◽  
Vol 57 (04) ◽  
pp. 20-28 ◽  
Author(s):  
Sulaiman M. Alnasser ◽  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Radical Scavenging ◽  
Extraction Yield ◽  
Extraction Time ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Optimum Conditions ◽  
Antioxidant Power ◽  
Independent Variables

The current study reports the antioxidant activity of Ocimum basilicum. Central composite design (CCD) was used to study the effect of variables on the extraction using magnetic stirrer (MST). Three independent variables including temperature, extraction speed, and extraction time were studied that optimize particular responses of total phenolic content, ferric reducing antioxidant power (FRAP), and DPPH free radical scavenging activity. The effect of the extraction temperature on extraction process was investigated in the range from 26.3oC to 93.6oC, extraction time, from 1 to 30 h, and extraction speed, in the range from 263 to 936 rpm. The extraction yield was significantly (P < 0.05) affected by all the variables. Temperature and extraction speed were found to have a marked effect while the extraction time was found to have possible minor effects. Graphical optimization determined the optimum conditions for the extraction. The optimum condition predicted an extraction yield of 20.49g/100g at 75.33oC for five hours at 73 rpm. Optimum conditions were determined to obtain highest extraction yield. Results showed that water/seed ratio was the most significant parameter, followed by temperature and time. All quantitative modeling and response surface methodology recommended that extraction temperature and time were the most effective parameters of MST process. However, extraction time was found out to be an insignificant factor in MST extraction of antioxidant and total phenolic compounds of O. basilicum.

scholarly journals Development of Phaleria macrocarpa (Scheff.) Boerl Fruits Using Response Surface Methodology On Phenolic, Flavonoid and Antioxidants Properties

2018 ◽  
Author(s):  
Khurul Ain Mohamed Mahzir ◽  
Siti Salwa Abdul Gani ◽  
Nor Fadzillah Mokhtar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Reducing Power ◽  
Extraction Time ◽  
Feed Ratio ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Phaleria Macrocarpa

In this study, the optimal condition for the extraction of antioxidants from the fruit Buah Mahkota Dewa (Phaleria macrocarpa) was determined by using Response Surface Methodology (RSM). The optimization was applied using central composite design (CCD) to investigate the three independent variables, namely extraction temperature (oC), extraction time (minutes) and extraction solvent to-feed ratio (%v/v) on the responses of free radical scavenging activity (DPPH), ferric ion reducing power assay (FRAP), total phenolic content (TPC) and total flavonoid content (TFC).The optimal conditions for the antioxidants extraction were found to be extraction temperature (64oC), extraction time (66 minutes) and solvent to-feed ratio (75 %v/v) with the highest percentage yield of DPPH, FRAP, TPC and TFC were 86.85%, 7.47%, 292.86 mg/g and 3.22 mg/g respectively. Moreover, the data were subjected to response surface methodology (RSM) and the results showed that the polynomial equations for all models were significant, did not show lack of fit, and presented adjusted determination coefficients (R2) above 99%, proving the yield of phenolic, flavonoid and antioxidants activities obtained experimentally were close to the predicted values and the suitability of the model employed in RSM to optimize the extraction conditions. Hence, in this study, the fruit from P.macrocarpa could be considered to have the strong antioxidant ability and can be used in various cosmeceutical or medicinal applications.

scholarly journals Homogenate Extraction of Crocins from Saffron Optimized by Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Yingpeng Tong ◽  
Yu Jiang ◽  
Dan Guo ◽  
Yongqiu Yan ◽  
Shiping Jiang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Process Conditions ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Voltage ◽  
Homogenate Extraction

Saffron, which has many kinds of biological activities, has been widely used in medicine, cosmetics, food, and other fields of health promotion industries. Crocins are the main component of saffron (Crocus sativus L.). At present, most of the extraction methods for crocins require long time or special instruments to complete the process and some of them are not suitable for industrial production at present. In this article, homogenate extraction technology which is a convenient and efficient method was developed for crocins extraction from saffron. Firstly, the influences of extraction voltage, extraction time, ethanol concentration, and temperature on crocins yield were studied by single factor experiments; and then response surface methodology (RSM) was used to optimize levels of four variables based on the result of single factor experiments. Results showed that the optimum extraction process conditions for crocins were as follows: extraction voltage, 110 V; ethanol concentration, 70%; extraction temperature, 57°C; and extraction time, 40 s. Based on these conditions, the extraction yield of crocins can reach 22.76% which is higher than ultrasonic extraction method. Therefore, homogenate extraction is an effective way to extract crocins from saffron with higher extraction yield and shorter extraction time.

scholarly journals Optimization of Supercritical Carbon Dioxide Extraction of Quercus infectoria Oil

2015 ◽  
Vol 74 (7) ◽  
Author(s):  
Liza Md Salleh ◽  
Stashia ELeaness Rosland Abel ◽  
Gholamreza Zahedi ◽  
Russly Abd Rahman ◽  
Hasmida Mohd Nasir ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Goodness Of Fit ◽  
Maximum Yield ◽  
Extraction Yield ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Predicted Values ◽  
Artificial Neural Network Ann ◽  
Quercus Infectoria

This current study focuses on the modelling and optimization of supercritical fluid extraction of Quercus infectoria galls oil. In this case, response surface methodology (RSM) and artificial neural network (ANN) were applied for the modelling and prediction of extraction yield of galls oil. A 17-run Box-Behnken Design (BBD) was employed to statistically optimize the process parameters of SC-CO2 extraction of Quercus infectoria galls at a condition as follows: pressure (5000, 6000, 7000 Psi), temperature (40, 50, 60°C) and extraction time (30, 45, 60 min). The maximum yield of the extracted oil is1.12 % and the optimum conditions are at an extraction pressure of 5574 Psi; extraction temperature of 75°C and extraction time of 54 min. Under the optimal conditions, the experimental results agree with the predicted values obtained through analysis of variance (ANOVA). This indicates a successful response surface methodology and highly satisfactory goodness of fit of the model used. The analysis of experimental design for process optimization results demonstrates that temperature and extraction time are the main parameters that influence the oil extraction of Quercus infectoria.

scholarly journals Optimization of the extraction of natural phenolic antioxidants from the seeds of Tamarindus indica L. - an undervalued by product of food processing - using response surface methodology

2018 ◽  
Vol 62 (1) ◽  
pp. 67-74 ◽  
Author(s):  
Atreyi Sarkar ◽  
Uma Ghosh
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Time ◽  
Phenolic Antioxidants ◽  
Extraction Temperature ◽  
Tamarindus Indica ◽  
Solvent Concentration ◽  
Antioxidant Power ◽  
Wide Range ◽  
Ferric Reducing Antioxidant Power

The seeds of Tamarindus indica are known to possess a wide range of phenolic compounds with high antioxidant activity as measured by the ferric reducing antioxidant power (FRAP). In the present study, the optimum conditions for the extraction of crude phenolic antioxidants from Tamarind seed were determined using response surface methodology (RSM). A central composite design (CCD) was used to investigate the effects of four independent variables, namely concentration of extractable solids in solvent (g/ml; X1), extraction time (h; X2), extraction temperature (°C; X3) and solvent concentration (%, v/v; X4) on the responses of total polyphenol content (TPC) and FRAP. The CCD consisted of 30 experimental runs. A second-order polynomial model was used for predicting the responses. Canonical analysis of the surface responses revealed that the predicted optimal conditions for the maximal yield of TPC and FRAP were concentration of extractable solids in solvent of 0.049 g/ml, extraction time of 3.24 h, extraction temperature of 45 °C and a solvent concentration of 50%. The experimental values in the optimised condition coincided with the predicted ones within a 95% confidence interval, hence indicating the suitability of the model and the success of RSM in optimizing the extraction parameters.

Optimization of Crude Polysaccharides Extraction from Plantago ovata Forsk Seed by Response Surface Methodology

2020 ◽  
Vol 16 (3) ◽  
pp. 354-363
Author(s):  
Ehsan Sadeghi ◽  
Reza Mohammadi ◽  
Mohammad H. Shirgardoun ◽  
Fatemeh Askari ◽  
Masoumeh Taghizadeh ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Food Packaging ◽  
Polynomial Equation ◽  
Edible Films ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Plantago Ovata

Background: Plantago ovata Forsk (Psyllium seed) is an annual plant of plantago genus. This plant widely grows in India and Iran. The Psyllium seed contains mucilage, protein, sugar, fat and tannins. Seed’s husk is a known source to extract hydrocolloid. Objective: The aim of this study was to optimize gum extraction from the Psyllium seed. Methods: The response surface methodology (RSM) was used to estimate the effect of independent variables on the extraction yield of Psyllium gum. The obtained experimental data were fitted to a second- order polynomial equation using multiple regression analysis and analyzed by appropriate statistical methods. A central composite design (CCD) was used for experimental design and analysis of the results to obtain the best possible combination of extraction temperature (X1= 60-80°C), extraction time (X2= 1-3 h), and the ratio of water to raw material (X3= 30-70%) for the maximum gum extraction. Results: Optimum extraction conditions were extraction temperature of 79°C, extraction time of 2.5 h, and the ratio of water to the raw material of 57%. The experimental extraction yield under optimal conditions was found to be 9 ± 0.25%, which was in agreement with the predicted value of 9.4%. Conclusion: This study showed that Psyllium gum can be used as a hydrocolloid source for pharmaceutical and food industry such as edible films for food packaging.

Optimization of Antioxidant Extraction from Freeze-dried Pulp, Peel, and Seed of Burmese grape (Baccaurea ramiflora Lour.) by Response Surface Methodology

2021 ◽  
Author(s):  
Mohammad Afzal Hossain ◽  
Md. Sakib Hossain
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Incubation Time ◽  
Maximum Yield ◽  
Extraction Procedure ◽  
Radical Scavenging ◽  
Total Phenolic ◽  
Solvent Concentration ◽  
Antioxidant Power ◽  
Freeze Dried

Abstract This study aimed to attain the optimum condition necessary for extracting the maximum yield of antioxidants from the freeze-dried pulp, peel, and seed of Burmese grape using response surface methodology (RSM). Solvent (ethanol) concentration (%), temperature (°C), and time (min) were taken as independent variables by factorial screening for the extraction procedure. After extraction, the antioxidant activity of all samples was determined employing 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity, total phenolic compounds (TPC), and ferric reducing antioxidant power (FRAP) assay. The experiment's optimum conditions were 80% solvent concentration, 69.01°C temperature, and 30 min for pulp. The optimum extraction conditions were found at 80°C for 29.39 min incubation time using 52.12% concentrated solvent for seed. For peel, the solvent concentration of 41.62% was found optimum when the temperature of 50°C and 30 min incubation time were used. The actual values of TPC, FRAP, and DPPH for freeze-dried pulp, peel and seed extracts were close to the predicted values, which confirms the models’ validity. The Analysis of Variance (ANOVA) showed that the models were significant for TPC, DPPH, and FRAP values of peel, pulp, and seed at different levels (p < 0.001 to p < 0.05). The composite desirability of pulp, seed, and peel were 0.94, 0.98, and 0.85, respectively, which suggest that the developed model could be effectively used for antioxidants’ extraction from freeze-dried pulp, peel, and seed of Burmese grape.

scholarly journals Optimization of Extraction of Total Phenolic and Total Flavonoid from Seeds of Alpinia blepharocalyx K. Schum. Using The Response Surface Methodology

2019 ◽  
Vol 57 (3B) ◽  
pp. 105
Author(s):  
Thanh Tan Nguyen ◽  
Huyen Thi Thanh Mai ◽  
Tuan Ngoc Nguyen ◽  
Quang Dinh Tran ◽  
Thang Dinh Tran
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Antioxidant Properties ◽  
Total Flavonoid ◽  
Extraction Time ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Flavonoid Compounds ◽  
Phenolic And Flavonoid ◽  
Phenolic And Flavonoid Compounds

Seeds of Alpinia blepharocalyx contain high amounts of phenolic and flavonoid compounds with potential antioxidant properties. In this study, the effects of the extraction method on the recovery of phenolic and flavonoid compounds from Alpinia blepharocalyx seeds were investigated. Response surface methodology (RSM) has been used to optimize the extraction conditions of total phenolic and total flavonoid from seeds of Alpinia blepharocalyx. A Box-Behnken design was used to investigate the effects of four independent variables, namely extraction temperature (°C), extraction time (min), (v/m) and ethanol concentration (%) on the responses: total phenolic content (TPC) and yield. The optimal conditions obtained from response RSM were 52.66 % v/v for the solvent composition, 62.34 (°C) for extraction temperature, 34.48/1 (ml/g) for solvent/material ratio and 125.42 (min) for extraction time. The experimental values of TPC, TFC and yield were 39.31±0.05 mgGAE/g, 12.75±0.07 mgCE/g and 6.97±0.05%, respectively.   

OPTIMIZATION OF PHYTOESTROGENS EXTRACTION FROM SOY GERM USING RESPONSE SURFACE METHODOLOGY

2021 ◽  
pp. 70-78
Author(s):  
Chau Le Minh
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Antioxidant Activities ◽  
Extraction Time ◽  
Optimum Conditions ◽  
Potential Health ◽  
Box Behnken Design ◽  
Independent Variables ◽  
Solid Ratio

Phytoestrogens are phytochemicals with antioxidant activities and potential health benefits. Their contents in soy germ is the highest compared to that in parts of soy seed. Response surface methodology (RSM) using Box Behnken Design of four factors was employed to optimize the extraction conditions for phytoestrogens. The Box Behnken Design with five replicates at central point was applied. The four independent variables investigated in this experiment were extraction time (X1) 60-120 minutes, solvent/solid ratio (X2) 8-12, extraction pH (X3) 8-10, ethanol concentration (X4) 50-70%. The high coefficient values indicated that the variables were fitted to the regression for the total phytoestrogens (R2 = 0.9887). Optimum conditions for maximizing total crude phytoestrogen content were 90 minutes for the extraction time, 12/1 for the extraction ratio, 9 for the extraction pH, and 65%  for the ethanol concentration.

Analysis of Antioxidant Activity and Total Phenolic Content in Garcinia mangostana Using Response Surface Methodology

2015 ◽  
Vol 1113 ◽  
pp. 217-222
Author(s):  
Ummi Kalthum Ibrahim ◽  
Amira Sofea Mahamad Husin ◽  
Ruzitah Mohd Salleh
Keyword(s):  
Antioxidant Activity ◽  
Response Surface ◽  
Total Phenolic Content ◽  
Phenolic Content ◽  
Radical Scavenging ◽  
Extraction Time ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Garcinia Mangostana ◽  
Different Parts

This study investigates the antioxidant activity and total phenolic content on different parts of Garcinia mangostana which are pericarp, leaf, fruit, and seed. 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay was used to determine the antioxidant activity and the total phenolic content was determined by Folin-Ciocalteu method. Response surface method (RSM) was used to determine the effect of the two extraction variables: extraction time (30-120 minutes) and extraction temperature (30-50°C) on yield of total phenolic content and antioxidant activity of different parts of Garcinia mangostana. The significant factors on each experimental design response were identified from the analysis of variance (ANOVA). The best condition for total phenolic content of different parts of Garcinia mangostana was chosen based on the desirability obtained by using extraction temperature of 30°C and extraction time of 60.09 minutes, which resulted in 0.0274 mg GAE/g of total phenolic content in pericarp, 0.2501 mg GAE/g of total phenolic content in leaf, 0.0202 mg GAE/g of total phenolic content in fruit, and 0.0198 mg GAE/g of total phenolic content in seed of Garcinia mangostana. Under this conditions, it was found that the antioxidant activity of pericarp, leaf, fruit, and seed of Garcinia mangostana were 89.45%, 86.58%, 93.33%, and 78.80% of radical scavenging activity, respectively.

scholarly journals Green Extraction of Phenolic Compounds from Lotus Seedpod (Receptaculum Nelumbinis) Assisted by Ultrasound Coupled with Glycerol

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 239
Author(s):  
Nina Bao ◽  
Di Wang ◽  
Xizhe Fu ◽  
Hujun Xie ◽  
Guizhen Gao ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Antioxidant Activities ◽  
Radical Scavenging ◽  
Extraction Yield ◽  
Total Phenolic ◽  
Glycerol Concentration ◽  
Extraction Temperature ◽  
Characteristic Functional ◽  
Antioxidant Power ◽  
Ultrasonic Time

Lotus Receptaculum Nelumbinis has been sparking wide research interests due to its rich phenolic compounds. In the present work, ultrasonic-assisted extraction coupled with glycerol was employed to extract phenolic compounds from Receptaculum Nelumbinis and the process was optimized using a response surface methodology with Box-Behnken design (BBD). The optimal conditions for the total phenolic content (TPC) extract were obtained: glycerol concentration of 40%, an extraction temperature of 66 °C, ultrasonic time of 44 min, and the solvent-to-solid ratio of 55 mL/g. Under these optimum extraction conditions, the extraction yield of TPC was 92.84 ± 2.13 mg gallic acid equivalents (GAE) /g. Besides, the antioxidant activities demonstrated the ability of free radical scavenging by four different methods that included 2,2-Diphenyl-1-picrylhydrazyl (DPPH), ferric reducing antioxidant power (FRAP), 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and reducing activity (RA) were 459.73 ± 7.07, 529.97 ± 7.30, 907.61 ± 20.28, and 983.66 ± 11.80 μmol TE/g, respectively. Six phenolic compounds were identified by ultra-high pressure liquid chromatography combined with triple-time-of-flight mass spectrophotometry (UPLC-Triple-TOF/MS) from the extracts. Meanwhile, Fourier transform infrared (FTIR) was conducted to identify the characteristic functional groups of the extracts and thus reflected the presence of polyphenols and flavonoids. Scanning electron microscopy (SEM) illustrated the microstructure difference of four treatments, which might explain the relationships between antioxidant activities and the structures of phenolic compounds.

Sign in / Sign up

Export Citation Format

Share Document