Growth Effect of the Different Ratios of Wood Vinegar on Brassica juncea

2021 ◽  
Vol 5 (2) ◽  
pp. 339-350
Author(s):  
Aljon Victor Nibalvos ◽  
Cristina H Tan Nibalvos
Keyword(s):  
Plant Height ◽  
Brassica Juncea ◽  
Block Design ◽  
Plant Production ◽  
Coconut Shell ◽  
Growth Effect ◽  
Leaf Number ◽  
Leaf Width ◽  
Wood Vinegar ◽  
Mustard Plant

Four (4) different ratios of wood vinegar namely; 1:5; 1:10; 1:20 and 1:30 mL WV to water ratio extracted from coconut shell was tested to determine their growth effect on Brassica juncea or mustard plant or locally known as mustasa. Parameters measured were leaf number, plant height, plant leaf width. Using randomized complete block design, experimental tests were conducted using Brassica juncea as test plants. The samples of 10 days old were allowed to flourish in a potted plant with day to day application of the wood vinegar solutions together with the negative control for a total of 30 days. Results revealed that the wood vinegar ratios applied have no significant effect on the growth of the mustard plant in terms of its leaf number, plant height and leaf width. This indicates that coconut shell wood vinegar at 1:5, 1:10, 1:20 and 1:30 are not applicable ratios for plant production, as that an increased wood vinegar application increases plant production and growth.

scholarly journals RESPON PUPUK KANDANG KAMBING DAN PUPUK NPK PADA PERTUMBUHAN DAN HASIL TANAMAN TERUNG HIJAU (Solanum melongena L.).

2016 ◽  
Vol 10 (1) ◽  
pp. 53-62
Author(s):  
Visca R Yuanita ◽  
Tri Kurniastuti ◽  
Palupi Puspitorini
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Solanum Melongena ◽  
Growth And Yield ◽  
Leaf Number ◽  
Fruit Length ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Npk Fertilizer ◽  
Goat Manure

Research about influence of goat manure and NPK fertilizer on the growth and yield of green eggplant (Solanum mengolena L.) has been conducted in field village farmer-owned Semen Gandusari District of Blitar which took place in March-April 2016. The aim of this study was to know the interaction for among goat manure and NPK fertilizer on the growth and yield of green eggplant as well as the effect of each factor. This study uses Randomaized Complete Block Design (RCBD) factorial consisting of 16 treatment and each 3 replicates ie: P0M0, P0M1, P0M2, P0M3, P1M0, P1M1, P1M2, P1M3, P2M0, P2M1, P2M2, P2M3, P3M0, P3M1 , P3M2, P3M3. The data taking were plant height, leaf number, fruit length, fruit diameter and weight of fruit per plant. The data were analyzed to F test as followed by a 5% test Honestly Significant Difference (HSD) error level of 5%. The experimental results very significant effect on plant height, leaf number, fruit length and weight of fruits per plant and the effect is not noticeable to the diameter of fruit plants green eggplant. The combined use goat manure 750 g / plant and NPK fertilizer 60 g / plant (P2M3) is proper fertilization to improve the growth and best yield of green eggplant with the highest total weight of the fruit crop that yields 1576.6 grams

scholarly journals Productivity of Selected African Leafy Vegetables under Varying Water Regimes

Agronomy ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 916
Author(s):  
Innocent Maseko ◽  
Bhekumthetho Ncube ◽  
Samson Tesfay ◽  
Melake Fessehazion ◽  
Albert Thembinkosi Modi ◽  
...  
Keyword(s):  
Water Stress ◽  
Chlorophyll Content ◽  
Plant Height ◽  
Dietary Diversity ◽  
Block Design ◽  
Leafy Vegetables ◽  
Leaf Number ◽  
Water Regimes ◽  
Content Index ◽  
African Leafy Vegetables

African leafy vegetables (ALVs) are nutrient dense and can contribute to crop and dietary diversity, especially in water-stressed environments. However, research on their productivity under limited water availability remains scant. The objective of the study was to evaluate growth, physiology and yield responses of three ALVs (Vigna unguiculata, Corchorus. Olitorius and Amaranthus cruentus) and a reference vegetable (Beta vulgaris var. cicla) to varying water regimes [30%, 60% and 100% of crop water requirement (ETc)]. Field trials using a randomised complete block design, replicated three times, were conducted over two summer seasons, 2015/16 and 2016/17. Leaf number, plant height, chlorophyll content index (CCI), chlorophyll fluorescence (CF), and yield were measured in situ. For A. cruentus and C. olitorius, water stress (30% ETc) was shown to produce a lower yield, although leaf number, plant height and chlorophyll content index were unaffected, while for B. vulgaris, leaf number and yield were reduced by water stress. For V. unguiculata, CF, CCI, plant height, leaf number, and yield were not affected by water stress, indicating its suitability for production in water scarce environments. Using 60% ETc was suitable for the production of A. cruentus, C. olitorius and B. vulgaris var. cicla, whereas 30% ETc is recommended for V. unguiculata. The yield results of V. unguiculata indicate that it performs better, while the yield of A. cruentus and C. olitorius is comparable to that of B. vulgaris under similar conditions, indicating potential for marginal production.

scholarly journals Line×tester analysis in lilium×formolongi: identification of superior parents for growth and flowering traits

2019 ◽  
Vol 17 (1) ◽  
pp. 175-187
Author(s):  
R Rai ◽  
J Shrestha ◽  
JH Kim
Keyword(s):  
Plant Height ◽  
Gene Action ◽  
Block Design ◽  
Leaf Length ◽  
Stem Diameter ◽  
Leaf Width ◽  
Days To Flowering ◽  
Flower Diameter ◽  
Number Of Leaves ◽  
Almost All

An experiment was carried out using eight double cross F1s (DCF1s) as lines and two testers to obtain sixteen Line ×Tester hybrids for the evaluation of major growth and flowering traits thereby to understand the breeding potentiality of the parental lines. The performance of growth and flowering traits of all twenty-six genotypes were evaluated in a randomized complete block design (RCBD) with three replications. The analysis of variance (ANOVA) showed all the genotypes were significantly different for all agro-morphological traits under study. The estimated general combining ability (GCA) effects showed that parent 5(P5), were superior for plant height, stem diameter, number of leaves, leaf length, days to flowering and attitude of floral axis followed by parent 2(P2) for leaf length, leaf width, days to flowering and attitude of floral axis and parent7 (P7) for number of flower, flower diameter, bud length and attitude for floral axis. Likewise; tester 1 found to be best combiner with significant GCA effect for almost all growth and flowering traits (except number of leaves). The plant height, leaf width, number of flower and attitude of floral axis showed prevailing additive gene action while stem diameter, number of leaves, leaf length, days to flowering, flower diameter and bud length indicated predominance of dominance gene action. We can conclude that parent P5, parent P2 and parent P7 can be used as good mother lines and the tester 1, as good donor for the seed production. SAARC J. Agri., 17(1): 175-187 (2019)

scholarly journals Agronomic performance of both virus-infected and virus-free garlic with different seed bulbs and clove sizes

2019 ◽  
Vol 54 ◽  
Author(s):  
Josué Clock Marodin ◽  
Francisco Vilela Resende ◽  
André Gabriel ◽  
Rovilson José de Souza ◽  
Juliano Tadeu Vilela de Resende ◽  
...  
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Size Variation ◽  
Market Value ◽  
Quality Standards ◽  
Plant Production ◽  
Agronomic Performance ◽  
Average Mass ◽  
Large Size ◽  
Randomized Complete Block Design

Abstract: The objective of this work was to evaluate the growth and production of a garlic clone subjected to either infection or virus-free conditions, according to bulb and clove size classification. The experiment was carried out in a randomized complete block design with four replicates. Treatments consisted of either virus-infected or virus-free cloves, obtained from bulbs of four size classes and from cloves with three sieve diameters. Vegetative characteristics and plant production were assessed. Plants infected by viral complexes showed a reduction in emergence (8.4%), plant height (9.8%), and production of marketable bulbs (39.4%), as well as a lower average mass of bulbs and cloves. The virus-free clone produced more bulbs in classes 5 (42-47 mm), 6 (47-56 mm), and 7 (> 56 mm), besides having a lower influence on marketable quality standards as a function of garlic seed size variation. In the infected clone, bulbs from sieve 6 and cloves from sieve 1 (15×25 mm) produced bulbs with the highest market value. Virus-free garlic seed, with bulbs and cloves of medium and large size, produce bulbs of the highest market value, whereas, for the infected garlic, this is possible only with the larger garlic size.

scholarly journals Growth and Yield of Onion as Influenced by Sulphur and Boron with Mulch Materials

2021 ◽  
pp. 1-14
Author(s):  
Sajeed Hasan Bappy ◽  
Khaleda Khatun ◽  
Tahmina Mostarin ◽  
Mutasim Fuad Shuvo ◽  
Mst. Umme Habiba ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Matter Content ◽  
Growth And Yield ◽  
Leaf Number ◽  
Maximum Diameter ◽  
Dry Matter Content ◽  
Economic Point ◽  
Neck Diameter

A field experiment was conducted at the research farm of Sher-e-Bangla Agricultural University, Dhaka. During the period from October, 2018 to March, 2019 to find out the growth and yield of onion as influenced by Sulphur and Boron with mulch materials. The experiment consisted of two factors: Factor A: Four doses of Sulphurand Boron fertilizer viz. F0 = S0kgB0kg/ha (Control), F1 = S20kgB1kg/ha, F2 = S40kgB2kg/ha, F3 = S60kgB3kg/ha and Factor B: Four types of mulch viz. M0 = No mulch and no irrigation, M1 = Black polythene, M2 = Water hyacinth and M3 = Rice straw. There were 16 treatment combinations and experiment was setup in a Randomized Complete Block Design (RCBD) with three replications. In case of Sulphur and Boron treatments at 60 days after transplanting (DAT), the highest plant height 53.38 cm, maximum leaf number 10.48, highest bulb length 4.83 cm,, maximum neck diameter (1.31 cm), highest dry matter content (15.98%), dry matter content of leaf (24.74%), single bulb weight (39.93 g), yield per plot (0.80 kg) and yield per hectare (9.98 t) were obtained from F3 treatment. Among the mulch materials,  highest plant height at 60 DAT (52.51 cm), maximum leaf number (10.19), highest bulb length (4.52 cm), highest bulb diameter (5.74 cm), maximum neck diameter (1.26 cm), dry matter content of leaf (23.35%), single bulb weight (39.05 g), yield per plot (0.78 kg) and yield per hectare (9.76 t) were obtained from M1 treatment. In combined effect, the highest plant height at 60 DAT (55.54 cm), maximum leaf number (11.47), longest bulb length (5.51 cm), highest bulb diameter (6.68 cm), maximum diameter of neck (1.42 cm), dry matter content of leaf (27.48%), single bulb weight (42.40 g), yield per plot (0.85 kg) and yield per hectare (11.21 t) were obtained from F3M1 treatment (S60kg/ha + B3kg/ha with black polythene mulch). The highest gross return (Tk. 3, 36, 300/ha), net return (Tk. 1, 88, 934/ha) and benefit cost ration (2.28) was obtained from the treatment combination (F3M1). Accordingly, for high growth, high yield, and economic point of view, F3M1 treatment is recommended in onion cultivation.

scholarly journals Growth Response and Crop Production (Brassica Juncea L.) Against Watering Time Interval at Various Hydroponics Media

2019 ◽  
Vol 1 (1) ◽  
pp. 9-22
Author(s):  
Muhammad Zailani ◽  
Retno Astuti Kuswardani ◽  
Ellen L. Panggabean
Keyword(s):  
Plant Height ◽  
Brassica Juncea ◽  
Crop Production ◽  
Growth Response ◽  
Leaf Number ◽  
Time Interval ◽  
Color Parameter ◽  
Leaf Color ◽  
Leaf Level ◽  
Wet Weight

This study aims to determine the Response Growth and Production of Crops (Brassica juncea L.) Against Watering Time Interval In Various Hydroponics Media. The research was conducted at the experimental gardens of Faculty of Agriculture, Faculty of Agriculture, University of Medan Area, located on No. Pond Street. 1 Medan Estate. This research was conducted from October 2013 until December 2013. The design used was RAL Factorial, with 2 replications, 10 combinations. The first factor of the hydroponic planting medium is: M1: Frying Roots, M2: Coconut Coir Powder, M3: Fryer Seal, M4: Rokwool, and M5: Sawdust, the second factor is the time interval: I1: 3 hours a day I2: 5 hours a day, starting from 08:00 a.m to 06:00 p.m. The result of this research indicates that the treatment of watering liquid fertilizer with different time interval does not show a real effect on the growth of mustard plants, Media treatment used on hydroponic systems have an influence very evident on the parameters of plant height, leaf number, leaf area, production weight and significant effect on leaf level parameters, influential planting medium and have the best number is M3 (fuel husk). Interaction interval of watering time on various hydroponic media did not have a significant effect on observed parameters, namely: plant height, leaf number, wet weight, and weight of production, while the leaf color parameter had significant effect on leaf width.

scholarly journals The Effect of NPK-Zeo Fertilizer on Growth and Production of Cucumber (Cucumis sativus L.) in Iwoimopuro Village, Kolaka District

2019 ◽  
Vol 2 (1) ◽  
pp. 7-13
Author(s):  
Tanti Anugrah ◽  
Musadia Afa ◽  
Yolanda Fitria Syahri
Keyword(s):  
Plant Height ◽  
Cucumis Sativus ◽  
Block Design ◽  
Fruit Weight ◽  
Leaf Number ◽  
Cucumis Sativus L ◽  
Fruit Number ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Flower Age

The Effect of NPK-Zeo Fertilizer on Growth and Production of Cucumber (Cucumis sativus L.)  in Iwoimopuro Village, Kolaka District. This research aimed to determine the effect of liquid fertilizer NPK-ZEO growth and result of cucumbers. This research has taken place in the village Iwoimopuro, District Wolo, Kolaka District. This research is compiled using a Randomized Block Design (RBD). Obser rations were made on plant height, leaf number, age of the plant begins to flower, age of the plant begins to bear fruit, fruit number and fruit weight. The data were processed using the Finger Print Car List (Anova) followed by Least Significant Difference Test (LSD). The results showed that administration of NPK-ZEO significant effect on plant height, leaf number, age of the plant begins to flower, age of the plant begins to bear fruit, fruit number and fruit weight

scholarly journals Dosis Npk Dan Konsentrasi Zat Pengatur Tumbuh Tidak Mempengaruhi Pertumbuhan Tanaman Sawi (Brassica Juncea L.)

Jurnal Agrium ◽  
2018 ◽  
Vol 15 (1) ◽  
pp. 29
Author(s):  
Muhammad Muaz Munauwar ◽  
Sri Jaya
Keyword(s):  
Brassica Juncea ◽  
Growth Regulator ◽  
Block Design ◽  
Fertilizer N ◽  
Water Parameters ◽  
Mustard Plant ◽  
Two Factors ◽  
Random Block ◽  
Number Of Leaves ◽  
Random Block Design

The purpose of this research is to observe the dosage of natrium, phospor and kalium fertilizer and the concentration of Atonic Growth Regulators appropriate for the growth and production of mustard greens (Brassica juncea, L) is good, and interaction of both factors. This research was conducted in Batumbulan Asli Village, Babussalam Sub-district, Southeast Aceh Regency with its height ± 220 m above sea. This research done in December 2016-January 2017, using Random Block Design (RBD) Factorial, which consists of 2 (two) factors. The first factor is the dosage of fertilizer (N) consisting of 3 levels, N1 = 0.50 gr /plot, N2 = 1 gr/ plot and N3 = 1.5 gr / plot. The second factor is the concentration of Atonic Growth Atonic Growth Regulator (A) consisting of 3 levels, A1 = 0.50 cc / l water, A2 = 1 cc /l water and A3 = 1.5 cc /l water. Parameters observed were plant height, number of leaves and leaf area. The results reported that fertilizers did not significantly affect the growth, but there was a tendency where the fertilizers and growth regulator fertilizer could increase the growth of mustard plant

scholarly journals KAJIAN PEMBERIAN SISA PENGGILINGAN PADI DAN PUPUK ORGANIK CAIR TERHADAP PERTUMBUHAN VEGETATIF TANAMAN SAWI HIJAU (Brassica juncea L.)

2020 ◽  
Vol 4 (1) ◽  
pp. 17
Author(s):  
Rahmadina Rahmadina
Keyword(s):  
Plant Height ◽  
Brassica Juncea ◽  
Rice Bran ◽  
Organic Fertilizer ◽  
Leaf Length ◽  
Soil Mixture ◽  
Mustard Plant ◽  
Top Soil ◽  
Wet Weight ◽  
Number Of Leaves

<p>Green mustard plants (Brassica rapa var. Parachinensis L.) are plants that have a source of vitamins and minerals. The purpose of this study was to determine the effect of the concentration of rice grinder and liquid organic fertilizer on the vegetative growth of mustard greens (Brassica juncea L.), to determine the effect of a mixture of Giving POC with plant growth on mustard plants and to determine the effect of a combination of POC and planting media mixture on the growth of mustard plants. This research was conducted in February to May 2020, Jalan Ekarasmi gg. ekanusa in the Kelurahan Gedung Johor, Medan Johor District, Medan City with a height of ± 30 m above sea level using a Random Factorial design consisting of 2 factors and 3 replications. The results showed that the POC concentration did not show a significant effect on plant height, number of leaves, leaf length, leaf width, leaf area, wet weight and chlorophyll of mustard plants, but visually the highest results were obtained at P2 treatment (30 cc / L water ) followed by P1 (15 cc / L water) and the lowest in P0 treatment (without POC), the planting media mixture showed a very significant effect on plant height at 7 and 14 HST and had no significant effect on all other observation variables. The highest yield was obtained in the treatment of M0 (Top Soil Soil) followed by M1 (Top Soil and Rice Husk Mixture) and M3 (Top Soil and Rice bran Mixture) and the lowest in M2 (Top Soil and Bran Soil) mixture, POC and the planting media mixture showed a very significant effect on the plant height variable at 14 HST and the amount of chlorophyll at harvest and had no significant effect on other variables. The best results were obtained on M3 P2 (Top Soil and Rice bran Mixture; P2 (POC concentration of 30 cc / L water).)</p><pre><em>Keywords: leftover rice mill, liquid organic fertilizer, mustard plant, vegetable pesticide.</em></pre>

scholarly journals Peningkatan Produksi Bawang Merah Melalui Teknik Pemupukan NPK

Jurnal Agro ◽  
10.15575/810 ◽  
2016 ◽  
Vol 3 (1) ◽  
pp. 36-42
Author(s):  
Ida Nur Istina
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Dry Weight ◽  
Plant Nutrients ◽  
Leaf Number ◽  
Fresh Weight ◽  
Npk Fertilizers ◽  
Randomized Block Design ◽  
Npk Fertilizer ◽  
Almost All

Bawang merah merupakan salah satu komoditas hortikultura strategis yang penyebarannya hampir di seluruh wilayah Indonesia. Permasalahan pengembangan komoditas ini adalah masih rendahnya produktivitas sebagai akibat adaptasi dan kecukupan asupan hara tanaman. Penelitian yang bertujuan untuk mendapatkan jenis pupuk NPK yang efektif dan efisien telah dilakukan di desa Langensari Kecamatan Lembang Kabupaten Bandung Barat dari Maret sampai Mei 2014 menggunakan Rancangan Acak kelompok (RAK) dengan 6 perlakuan dan 3 kali ulangan. Pupuk NPK yang digunakan adalah A= NPK 18+9+10+Te, B=NPK 15+15+sulfat 10, C=NPK 12+11+18z+(S) z +3 Mg+3,8S+Te, D= NPK 15+9+20(S)+2 MgO+3,8 S+Te, E= NPK 25+7+7 dan F=kontrol. Parameter yang diamati meliputi: tinggi tanaman, jumlah umbi, jumlah daun, panjang umbi (cm), diameter umbi (cm), bobot basah (g) dan bobot kering brangkasan (g). Hasil penelitian menunjukkan bahwa NPK 12+11+18z+(S)z+3 Mg+3,8S+Te menghasilkan bobot umbi terbaik. The shallot is one of the strategic and valuable horticultural commodities which is spreaded almost all over Indonesia area. Commodity development constrain by the low productivity as a result of adaptation and inadequate intake of plant nutrients. The research purposed  to get the kind of NPK fertilizers that was efective and efficient on shallot production had been done in the Langensari village Langensari Lembang district, West Bandung regency from March till May 2014, using Randomized Block Design (RBD) with 6 treatments and 3 repplications. NPK fertilizer used were: A = NPK 18+9+10+Te, B = NPK 15+15+sulfate 10, C = NPK 12+11+18z+(S) z + 3 Mg+3,8S+Te, D = NPK 15+9+20(S)+2MgO+3,8 S+Te, E = NPK 25+7+7 and F = control. The observed parameters were plant height (cm), number of tubers, leaf number, tuber length, tuber diameter, fresh weight and dry weight tuber. The results showed that NPK 12+11+18z+ (S)z+3 Mg+3,8S+Te gave the best growth and production.

Sign in / Sign up

Export Citation Format

Share Document