scholarly journals Kinetic Analysis of the Adsorption of Chromium onto Calcium Alginate Nanoparticles

2021 ◽  
Vol 5 (2) ◽  
pp. 8-13
Author(s):  
Bilal Ibrahim Dan-Iya ◽  
Salihu Yahuza ◽  
Ibrahim Alhaji Sabo
Keyword(s):  
Confidence Interval ◽  
Kinetic Analysis ◽  
Calcium Alginate ◽  
Information Criterion ◽  
Order Rate Constant ◽  
Industrial Applications ◽  
Visual Observation ◽  
Coefficient Of Determination ◽  
Order Model ◽  
A Value

The widespread use of chromium in industrial applications such as leather tanning, metallurgy, electroplating, and refractory materials has resulted in it being one of the most harmful trace elements to be introduced into surface and ground waters. The sorption isotherm of chromium sorption onto calcium alginate nanoparticles were analyzed using three models—pseudo-1st, pseudo-2nd and Elovich, and fitted using non-linear regression. The Elovich model was the poorest in fitting the curve based on visual observation followed by the pseudo-1st order. Statistical analysis based on root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), Bayesian Information Criterion (BIC) and Hannan–Quinn information criterion (HQC) that showed that the pseudo-1ST order model is the best model. Kinetic analysis using the pseudo-1st order model at 400 mg/L 4-BDE gave a value of equilibrium sorption capacity qe of 31.89 mg g-1 (95% confidence interval from 30.37 to 33.42) and a value of the pseudo-1st-order rate constant, k1 of 0.22 (95% confidence interval from 0.019 to 0.025). Further analysis is needed to provide proof for the chemisorption mechanism usually tied to this kinetic.

scholarly journals Kinetic Analysis of the Adsorption of Ethyl Violet onto Graphene Oxide Sheets Integrated with Gold Nanoparticles

2021 ◽  
Vol 9 (2) ◽  
pp. 35-39
Author(s):  
Bilal Ibrahim Dan-Iya ◽  
Ain Aqilah Basirun ◽  
Mohd Yunus Shukor
Keyword(s):  
Graphene Oxide ◽  
Confidence Interval ◽  
Information Criterion ◽  
Cost Effective ◽  
Order Rate Constant ◽  
Coefficient Of Determination ◽  
Order Model ◽  
Ethyl Violet ◽  
Bias Factor ◽  
Pseudo Second Order

An example of biosorption is when the sorbent is made from a biodegradable material. Biosorption is now being seen as a simple, cost-effective, and environmentally acceptable alternative to traditional pollution treatment methods. Bioremediation is one of the branches of bioremediation that is used to minimise pollution in the context of incorrect dye waste disposal. The sorption isotherm of Ethyl Violet onto graphene oxide were analyzed using three models—pseudo-1st, pseudo-2nd and Elovich, and fitted using non-linear regression. Statistical analysis based on root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), Bayesian Information Criterion (BIC) and Hannan–Quinn information criterion (HQC) that showed that the pseudo-second-order model was the best which was the same finding from the original published work. The calculated evidence ratio was 11 with an AICc probability value of 0.91 indicating that the best model was at least 11 times better than the nearest best model, which was pseudo-1st. Further analysis is needed to provide proof for the mechanism usually tied to this kinetic. Nonlinear regression analysis using the pseudo-2nd order model for the highest concentration tested, which was 10 mM, gave values of equilibrium sorption capacity qe of 30.928 mg/g (95% confidence interval from 29.328 to 32.527) and a value of the pseudo-2nd-order rate constant, k2 of 0.020 (95% confidence interval from 0.011 to 0.028).

scholarly journals Kinetic Analysis of the Adsorption of Cibacron Blue onto Bean Peel

2021 ◽  
Vol 5 (2) ◽  
pp. 14-18
Author(s):  
Ain Aqilah Basirun ◽  
Mohd Yunus Shukor
Keyword(s):  
Confidence Interval ◽  
Waste Disposal ◽  
Information Criterion ◽  
Cost Effective ◽  
Order Rate Constant ◽  
Visual Observation ◽  
Coefficient Of Determination ◽  
Textile Waste ◽  
Cibacron Blue ◽  
Biological Source

Biosorption is a kind of sorption technology in which the sorbent is derived from a biological source. At the moment, biosorption is seen as a simple, cost-effective, and environmentally friendly process that might be employed as a viable alternative to conventional techniques of pollution removal. When it comes to improper textile waste disposal, it falls under one of the branches of bioremediation that is used to reduce contamination in the setting of improper textile waste disposal. The sorption isotherm of Cibacron Blue onto bean peel were analyzed using three models—pseudo-1st, pseudo-2nd and Elovich, and fitted using non-linear regression. The Elovich model was the poorest in fitting the curve based on visual observation and the best was pseudo-2nd order based on statistical analysis such as root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), Bayesian Information Criterion (BIC) and Hannan–Quinn information criterion (HQC). Nonlinear regression analysis using the pseudo-2nd order model gave values of equilibrium sorption capacity qe of 6.164 mg/g (95% confidence interval from 5.918 to 6.410 ) and a value of the pseudo-2nd-order rate constant, k2 of 0.034 (95% confidence interval from 0.024 to 0.045). Further analysis is needed to provide proof for the chemisorption mechanism usually tied to this kinetic.

scholarly journals Isothermal Modelling of the Adsorption of Chromium onto Calcium Alginate Nanoparticles

2021 ◽  
Vol 9 (2) ◽  
pp. 1-7
Author(s):  
Bilal Ibrahim Dan-Iya ◽  
Mohd Yunus Shukor
Keyword(s):  
Confidence Interval ◽  
Calcium Alginate ◽  
Information Criterion ◽  
Industrial Applications ◽  
Coefficient Of Determination ◽  
Refractory Materials ◽  
Bias Factor ◽  
Nonlinear Regression Method ◽  
Parameter Values ◽  
Better Than

Because of its extensive usage in industrial applications such as leather tanning, metallurgy, electroplating, and refractory materials, chromium is one of the most dangerous trace elements introduced into surface and ground waters. The sorption isotherm of chromium sorption onto calcium alginate nanoparticles were analyzed using ten models—Henry, Langmuir, Dubinin-Radushkevich, Freundlich, BET, Toth, Sips, Fritz-Schlunder IV, Baudu and Fritz-Schlunder V, and fitted using non-linear regression. Only the Toth and Fritz-Schlunder V models were unable to fit the data. Statistical analysis based on root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), BIC and HQC showed that the Langmuir model was the best model in terms of overall best criteria. The calculated evidence ratio was 7 with an AICc probability value of 0.87 indicating that the best model was at least 7 times better than the nearest best model, which was Freundlich. The calculated Langmuir parameters qmL value of 79.174 mg/g (95% confidence interval from 50.702 to 107.646) and bL value of 0.332 L/mg (95% confidence interval from 0.294 to 0.371) is not much different from the linearized published work for the qmL value of 145 mg/g but lower than the bL value of 0.34 L/mg. The nonlinear regression method allows for the parameter values to be represented in the 95% confidence interval range which can better allow comparison with published results.

scholarly journals Kinetic Analysis of the Adsorption of Malachite Green onto Graphene Oxide Sheets Integrated with Gold Nanoparticles

2021 ◽  
Vol 9 (2) ◽  
pp. 48-52
Author(s):  
Ibrahim Alhaji Sabo ◽  
Salihu Yahuza ◽  
Bilal Ibrahim Dan-Iya ◽  
Abdussamad Abubakar
Keyword(s):  
Graphene Oxide ◽  
Confidence Interval ◽  
Malachite Green ◽  
Information Criterion ◽  
Cost Effective ◽  
Order Rate Constant ◽  
Visual Observation ◽  
Coefficient Of Determination ◽  
Textile Dye ◽  
Bias Factor

Malachite green is extensively used in the textile dye industry and in agriculture as fish pests’ pesticide. Biosorption is a type of sorption technique that uses a biological sorbent. As of now, biosorption is viewed as a simple and cost-effective process that might be used as an alternative to traditional pollution treatment methods. Bioremediation is one of the branches of bioremediation that is used to minimise pollution in the context of incorrect textile waste disposal. The sorption isotherm of Malachite Green onto graphene oxide were analyzed using three models—pseudo-1st, pseudo-2nd and Elovich, and fitted using non-linear regression. The Elovich model was the poorest in fitting the curve based on visual observation and the best was pseudo-2nd order based on statistical analysis such as root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), Bayesian Information Criterion (BIC) and Hannan–Quinn information criterion (HQC). Nonlinear regression analysis using the pseudo-2nd order model gave values of equilibrium sorption capacity qe of 6.164 mg/g (95% confidence interval from 5.918 to 6.410) and a value of the pseudo-2nd-order rate constant, k2 of 0.034 (95% confidence interval from 0.024 to 0.045). Further analysis is needed to provide proof for the chemisorption mechanism usually tied to this kinetic.

scholarly journals Isothermal Modelling of the Adsorption of Cibacron Blue onto Bean Peel

2021 ◽  
Vol 3 (2) ◽  
pp. 20-24
Author(s):  
Mohd Yunus Shukor
Keyword(s):  
Confidence Interval ◽  
Freundlich Isotherm ◽  
Information Criterion ◽  
Coefficient Of Determination ◽  
Maximum Adsorption Capacity ◽  
Cibacron Blue ◽  
A Value ◽  
Bias Factor ◽  
Nonlinear Regression Method ◽  
Parameter Values

Biosorption is a sort of sorption technology in which the sorbent is a substance that is biologically sourced. In today's world, biosorption is seen as a simple, inexpensive, and ecologically friendly way for removing pollutants from the environment. One of the branches of bioremediation that is utilised to decrease environmental pollution in the context of minimising improper textile waste disposal is this method. The sorption isotherm of Cibacron Blue onto bean peel were analyzed using ten models—Henry, Langmuir, Dubinin-Radushkevich, Freundlich, BET, Toth, Sips, Fritz-Schlunder IV, Baudu and Fritz-Schlunder V, and fitted using non-linear regression. Statistical analysis based on root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), BIC and HQC showed that the Freundlich model was the best model in terms of overall best criteria. The calculated evidence ratio was 8 with an AICc probability value of 0.89 indicating that the best model was at least 8 times better than the nearest best model, which was Sips. The calculated Freundlich parameters KF (Freundlich isotherm constant) and nF (Freundlich exponent) were 5.369 (L/g) (95% confidence interval from 4.359 to 6.379) and 3.125 (95% confidence interval from 2.717 to 3.533). The Langmuir constant was utilized to calculate the maximum adsorption capacity QmL (mg/g) which gave a value of 27.83 mg/g (95% confidence interval from 23.69 to 31.98). The nonlinear regression method allows for the parameter values to be represented in the 95% confidence interval range which can better allow comparison with published results.

scholarly journals Kinetics Modeling on the Biosorption of Remazol Black B Dye by Aspergillus flavus

2021 ◽  
Vol 9 (2) ◽  
pp. 19-22
Author(s):  
Salihu Yahuza ◽  
Ibrahim Alhaji Sabo ◽  
Hadiza Aliyu Biu
Keyword(s):  
Aspergillus Flavus ◽  
Textile Industry ◽  
Information Criterion ◽  
Order Rate Constant ◽  
Coefficient Of Determination ◽  
Order Model ◽  
Covalent Bonds ◽  
Aquatic Life ◽  
Remazol Black B ◽  
Remazol Black

Azo dyes, such as Remazol Black B, are different from conventional dyes in that they establish covalent bonds with textile fibers like cotton. They are widely utilized in the textile industry because of their favorable properties of bright color, water resistance, simple application procedures, and low energy consumption. Their discharge into receiving streams has major environmental consequences, such as reducing photosynthesis in aquatic life due to lower light penetration. The biosorption isotherm data of Remazol Black B dye biosorption by Aspergillus flavus were investigated using two models—pseudo-1st order and pseudo-2nd order—and fitted using non-linear regression. The pseudo-1st order model was found to be the best by statistical analysis using root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), Bayesian Information Criterion (BIC), and Hannan–Quinn information criterion (HQC). At 250 mg/L, kinetic analysis using the pseudo-1st order model yielded an equilibrium sorption capacity qe of 4.61 mg/g (95 % confidence interval from 4.54 to 4.68) and a pseudo-1st-order rate constant, k1 of 0.15 (95% C.I. from 0.128 to 0.164).

scholarly journals Modeling of Lake Malombe Annual Fish Landings and Catch per Unit Effort (CPUE)

Forecasting ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 39-55
Author(s):  
Rodgers Makwinja ◽  
Seyoum Mengistou ◽  
Emmanuel Kaunda ◽  
Tena Alemiew ◽  
Titus Bandulo Phiri ◽  
...  
Keyword(s):  
Time Series ◽  
Information Criterion ◽  
Coefficient Of Determination ◽  
Series Data ◽  
Efficiency Coefficient ◽  
Arima Models ◽  
Catch Per Unit Effort ◽  
Annual Fish ◽  
Unit Effort ◽  
The Mean

Forecasting, using time series data, has become the most relevant and effective tool for fisheries stock assessment. Autoregressive integrated moving average (ARIMA) modeling has been commonly used to predict the general trend for fish landings with increased reliability and precision. In this paper, ARIMA models were applied to predict Lake Malombe annual fish landings and catch per unit effort (CPUE). The annual fish landings and CPUE trends were first observed and both were non-stationary. The first-order differencing was applied to transform the non-stationary data into stationary. Autocorrelation functions (AC), partial autocorrelation function (PAC), Akaike information criterion (AIC), Bayesian information criterion (BIC), square root of the mean square error (RMSE), the mean absolute error (MAE), percentage standard error of prediction (SEP), average relative variance (ARV), Gaussian maximum likelihood estimation (GMLE) algorithm, efficiency coefficient (E2), coefficient of determination (R2), and persistent index (PI) were estimated, which led to the identification and construction of ARIMA models, suitable in explaining the time series and forecasting. According to the measures of forecasting accuracy, the best forecasting models for fish landings and CPUE were ARIMA (0,1,1) and ARIMA (0,1,0). These models had the lowest values AIC, BIC, RMSE, MAE, SEP, ARV. The models further displayed the highest values of GMLE, PI, R2, and E2. The “auto. arima ()” command in R version 3.6.3 further displayed ARIMA (0,1,1) and ARIMA (0,1,0) as the best. The selected models satisfactorily forecasted the fish landings of 2725.243 metric tons and CPUE of 0.097 kg/h by 2024.

scholarly journals Value-driven engineering of E-maintenance platforms

2014 ◽  
Vol 25 (4) ◽  
pp. 568-598 ◽  
Author(s):  
Marco Macchi ◽  
Adolfo Crespo Márquez ◽  
Maria Holgado ◽  
Luca Fumagalli ◽  
Luis Barberá Martínez
Keyword(s):  
Information And Communication Technologies ◽  
Cost Benefit ◽  
Communication Technologies ◽  
Industrial Applications ◽  
Maintenance Management ◽  
Content Type ◽  
Positive Effects ◽  
A Value ◽  
New Information ◽  
Information And Communication

Purpose – The purpose of this paper is to propose a methodology for the engineering of E-maintenance platforms that is based on a value-driven approach. Design/methodology/approach – The methodology assumes that a value-driven engineering approach would help foster technological innovation for maintenance management. Indeed, value-driven engineering could be easily adopted at the business level, with subsequent positive effects on the industrial applications of new information and communication technologies solutions. Findings – The methodology combines a value-driven approach with the engineering in the maintenance scope. The methodology is tested in a manufacturing case to prove its potential to support the engineering of E-maintenance solutions. In particular, the case study concerns the investment in E-maintenance solutions developed in the framework of a Supervisory Control and Data Acquisition system originally implemented for production purposes. Originality/value – Based on literature research, the paper presents a methodology that is implemented considering three different approaches (business theories, value-driven engineering and maintenance management). The combination of these approaches is novel and overcomes the traditional view of maintenance as an issue evaluated from a cost-benefit perspective.

PENGARUH STRES KERJA TERHADAP TURNOVER INTENTION PADA KARYAWAN PT INTERNUSA JAYA SEJAHTERA MERAUKE

2018 ◽  
Vol 13 (1) ◽  
pp. 59
Author(s):  
Samrotu Sa’adah ◽  
Arif Partono Praseti
Keyword(s):  
Linear Regression ◽  
Work Stress ◽  
Turnover Intention ◽  
Descriptive Analysis ◽  
Linear Regression Analysis ◽  
Coefficient Of Determination ◽  
A Value ◽  
Employee Turnover Intention ◽  
Analysis Technique ◽  
Positive Effect

This study aims to examine the effect of work stress on employee turnover intention at PT Internusa Jaya Sejahtera Merauke, Papua. This study obtained data from questionnaires distributed to 117 employees of PT Internusa Jaya Sejahtera. The questionnaire used has 14 point statements and uses a 6 point Likert scale. The technique used in this research is descriptive analysis technique used to analyze the level of work stress and turnover intention level on employees. Simple linear regression analysis is also used to determine the effect between work stress variables and turnover intention variables. The results showed that work stress had a significant positive effect on turnover intention on employees of PT Internusa Jaya Sejahtera. The coefficient of determination in this study has a value of 0.571 which means that the level of job stress to turnover intention of 57.1%.Keywords : work stress, turnover intention, linear regression ABSTRAK Penelitian ini bertujuan untuk meneliti pengaruh stres kerja terhadap turnover intention pada karyawan di PT Internusa Jaya Sejahtera Merauke, Papua. Peneltian ini memperoleh data dari hasil penyebaran kuesioner kepada 117 karyawan PT Internusa Jaya Sejahtera. Kuesioner yang digunakan memiliki 14 butir pernyataan dan menggunakan skala Likert 6 poin. Teknik yang digunakan pada penelitian kali ini adalah teknik analisis deskriptif yang digunakan untuk menganalisis tingkat stres kerja dan tingkat turnover intention pada karyawan. Analisis regresi linier sederhana juga digunakan unntuk mengetahui pengaruh antara variabel stres kerja dan variabel turnover intention. Hasil penelitian menunjukkan bahwa stres kerja berpengaruh signifikan positif terhadap turnover intention pada karyawan PT Internusa Jaya Sejahtera. Koefisien determinasi pada penelitian ini memiliki nilai 0.571 yang memiliki arti bahwa tingkat stres kerja terhadap turnover intention sebesar 57,1%.Kata kunci : stres kerja, turnover intention, regresi linier.

scholarly journals The use of the nonlinear models in the growth of pears of ‘Shinseiki’ cultivar

2017 ◽  
Vol 48 (1) ◽  
Author(s):  
Thais Destefani Ribeiro ◽  
Taciana Villela Savian ◽  
Tales Jesus Fernandes ◽  
Joel Augusto Muniz
Keyword(s):  
Logistic Model ◽  
Least Squares Method ◽  
Nonlinear Models ◽  
Logistic Models ◽  
Information Criterion ◽  
Fruit Weight ◽  
Coefficient Of Determination ◽  
Pear Fruit ◽  
Asian Pear ◽  
Residual Correlations

ABSTRACT: The goal of this study was to elucidate the growth and development of the Asian pear fruit, on the grounds of length, diameter and fresh weight determined over time, using the non-linear Gompertz and Logistic models. The specifications of the models were assessed utilizing the R statistical software, via the least squares method and iterative Gauss-Newton process (DRAPER & SMITH, 2014). The residual standard deviation, adjusted coefficient of determination and the Akaike information criterion were used to compare the models. The residual correlations, observed in the data for length and diameter, were modeled using the second-order regression process to render the residuals independent. The logistic model was highly suitable in demonstrating the data, revealing the Asian pear fruit growth to be sigmoid in shape, showing remarkable development for three variables. It showed an average of up to 125 days for length and diameter and 140 days for fresh fruit weight, with values of 72mm length, 80mm diameter and 224g heavy fat.

Sign in / Sign up

Export Citation Format

Share Document