Influence of orientation of zones of higher hardness of composite layers on their resistance to wear

2021 ◽  
Vol 2 (110) ◽  
pp. 59-71
Author(s):  
V.V. Peremitko ◽  
I.V. Kolomoyets
Keyword(s):  
Wear Resistance ◽  
High Hardness ◽  
Variable Composition ◽  
Wear Process ◽  
Tests And Measurements ◽  
Composite Layers ◽  
Rolling Production ◽  
Uneven Wear ◽  
Preliminary Application ◽  
Practical Implications

Purpose: Experimentally substantiate the influence of the orientation of zones of higher hardness on the wear mechanism of contact surfaces. Design/methodology/approach: Forming of variable composition within the working surfaces of parts is a common way to solve the problem of uneven wear. The tests were aimed at determining the characteristics of the layers surfaced with the orientation of the zones of high hardness. For this different tests and measurements were done. Before the test, samples of 45 steel were surfaced with a preliminary application of titanium carbide paste. Findings: As a result of researches it was found that different ways of the orientation of zones of higher hardness have different influences on the characteristics of a surface. The main conclusion is that the transverse orientation of such zones helps to increase the wear resistance of the surface and to save its original relief. Research limitations/implications: The roughness, wear resistance, zonal hardness, and relief of layers surfaced with the orientation of zones of higher hardness were studied. Practical implications: The results obtained are useful in the field of rolling production and mechanical engineering to avoid the uneven wear of parts and as a result to extend the term of their exploitation. Originality/value: In this paper the model concepts of wear process of surfaces with variable composition and measurements of characteristics of surface considering its local hardening are proposed.

scholarly journals Tribological Properties of Single (AlSi7/SiCp, AlSi7/GCsf) and Hybrid (AlSi7/SiCp + GCsf) Composite Layers Formed in Sleeves via Centrifugal Casting

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2803 ◽  
Author(s):  
Anna Janina Dolata ◽  
Maciej Dyzia ◽  
Jakub Wieczorek
Keyword(s):  
Wear Resistance ◽  
Coefficient Of Friction ◽  
Tribological Properties ◽  
Hybrid Composite ◽  
Centrifugal Casting ◽  
Composite Layer ◽  
Vitreous Carbon ◽  
Structural Factors ◽  
Wear Process ◽  
Composite Layers

When designing the composition and structure of a composite material intended for tribological cooperation, many external and structural factors must be considered. The aim of this research was to compare the tribological properties (wear resistance and friction coefficient) of AlSi7Mg1Sr0.03/SiCp and AlSi7Mg1Sr0.03/GCsf single-reinforced composite layers with AlSi7Mg1Sr0.03/SiCp + GCsf hybrid composite layer formed in sleeves via vertical centrifugal casting. Profilometry enabled quantitative and qualitative analyses to be performed on the wear traces formed on investigated surfaces. The results show that a hybrid composite layer containing spherical glassy carbon particles had a significantly lower and more stable coefficient of friction (μ) and a higher wear resistance compared with single composite layers. The obtained effect was related to the mechanism of vitreous carbon consumption, which was crushed during operation, and then introduced between the cooperating friction surfaces. In this way, it acted as a solid lubricant, which stabilized the coefficient of friction and reduced the wear process.

scholarly journals Tribological Properties of Ni/Cu/Ni Coating on the Ti-6Al-4V Alloy after Annealing at Various Temperatures

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 847
Author(s):  
Jinheng Luo ◽  
Nan Wang ◽  
Lixia Zhu ◽  
Gang Wu ◽  
Lifeng Li ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Tribological Properties ◽  
Annealing Temperature ◽  
Physical Mechanism ◽  
High Hardness ◽  
Diffusion Reaction ◽  
Annealing Temperatures ◽  
Composite Layers ◽  
Surface Performance ◽  
The Relationship

Diffusion reaction was a crucial route to enhance the wear resistance of Ti-6Al-4V alloys surface. In this work, the Ni/Cu/Ni composite layers were fabricated on the surface of Ti-6Al-4V alloy by electroplate craft, and then different annealing temperatures were applied to further optimize its tribological properties. The diffusion behaviors at various temperatures were systematically analyzed to reveal the physical mechanism of the enhanced tribological properties of the coatings. It was demonstrated that CuxTiy and NixTiy intermetallic compounds with high hardness and strength were produced in the Ni/Cu/Ni coating, which acted as the reinforcing phases and improved the microhardness, reduced the friction coefficient, and lessened the wear rate. Specially, this effect reached the maximum when the annealing temperature was 800 °C, showing excellent wear resistance. This work revealed the relationship between annealing temperatures and tribological properties of the Ni/Cu/Ni coating, and proposed wear mechanism, aiming to improve the surface performance of Ti-6Al-4V alloy by appropriate diffusion behavior.

REYNOLDS 390 and A390

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Silicon Alloys ◽  
Aluminum Silicon Alloys ◽  
Temperature Performance

Abstract REYNOLDS 390 and A390 are hypereutectic aluminum-silicon alloys having excellent wear resistance coupled with good mechanical properties, high hardness, and low coefficients of expansion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-203. Producer or source: Reynolds Metals Company.

HOWMET No. 3

Alloy Digest ◽  
1968 ◽  
Vol 17 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
High Hardness ◽  
Heat Treating ◽  
High Heat ◽  
Cobalt Base Alloy ◽  
Metal Products ◽  
Cobalt Base

Abstract HOWMET No. 3 is a cobalt-base alloy having high hardness and compressive strength, high heat and corrosion resistance, along with excellent abrasion and wear resistance. It is recommended for bushings, scrapers, valve parts, and other machinery components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-56. Producer or source: Howmet Corporation Metal Products Division.

DOUBLE SEVEN

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Cold Working ◽  
High Hardness ◽  
Heat Treating ◽  
Heavy Duty ◽  
High Carbon ◽  
Die Steel ◽  
High Chromium

Abstract DOUBLE SEVEN is an air hardening high-carbon high-chromium tool and die steel having high hardness and wear resistance. It is recommended for shear blades, cold working tools, and heavy duty dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-124. Producer or source: Edgar Allen & Company Ltd, Imperial Steel Works.

DURATECH 30

Alloy Digest ◽  
2006 ◽  
Vol 55 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Powder Metal ◽  
Temperature Performance ◽  
Very High

Abstract DuraTech 30 is a superhigh-speed steel evolved from the ASTM M3-2 composition, but with added cobalt. The exotic composition offers improved toughness and very high hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance and wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-629. Producer or source: Timken Latrobe Steel.

Laser Assisted High Entropy Alloy Coating on Low Carbon Steel

2019 ◽  
Vol 813 ◽  
pp. 159-164
Author(s):  
Carlos Alberto Souto ◽  
Gustavo Faria Melo da Silva ◽  
Laura Angelica Ardila Rodriguez ◽  
Aline C. de Oliveira ◽  
Kátia Regina Cardoso
Keyword(s):  
Wear Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
High Hardness ◽  
Alloy Coating ◽  
High Entropy Alloy ◽  
Nominal Composition ◽  
Low Carbon ◽  
High Entropy ◽  
Scan Speed

Coatings with high entropy alloys of the AlCoCrFeNiV system were obtained by selective laser melting on low carbon steel substrates. The effect of the variation of the Fe and V contents as well as the laser processing parameters in the development of the coating were evaluated. The coatings were obtained from the simple powder mixtures of the high purity elemental components in a planetary ball mill. The coatings were obtained by using CO2 laser with a power of 100 W, diameter of 0.16 mm, and scan speed varying from 3 to 12 mm/s. Phase constituents, microstructure and hardness were investigated by XRD, SEM, and microhardness tester, respectively. Wear resistance measurements were carried out by the micro-abrasion method using ball-cratering tests. The coatings presented good adhesion to the substrate and high hardness, of the order of 480 to 650 HV. Most homogeneous coating with nominal composition was obtained by using the higher scan speed, 12 mm/s. Vanadium addition increased hardness and gave rise to a high entropy alloy coating composed by BCC solid solutions. Ball cratering tests conducted on HEA layer showing improvement of material wear resistance, when compared to base substrate, decreasing up to 88% its wear rate, from 1.91x10-6 mm3/Nmm to 0.23x10-6 mm3/Nmm.

Microstructural characteristics of SiC-B4C reinforced laser alloying composite coatings

2013 ◽  
Vol 20 (4) ◽  
pp. 307-310
Author(s):  
Li Wei
Keyword(s):  
Wear Resistance ◽  
Composite Coating ◽  
Fine Particles ◽  
Composite Coatings ◽  
Substrate Surface ◽  
Laser Alloying ◽  
Wear Process ◽  
High Microhardness ◽  
Deep Plowing ◽  
Coating Matrix

AbstractA hard SiC-B4C reinforced composite coating was fabricated by laser alloying of SiC-B4C+Al-Sn-Mo-Y2O3 mixed powders on a Ti-3Al-2V alloy. Al-Sn-Mo mixed powders were first used in the laser alloying technique to improve the wear resistance of titanium alloys. Proper selection of the laser alloying process parameters allows us to obtain a composite coating with a metallurgical combination with substrate. Under the action of Mo, fine particles with high microhardness were produced in the coating matrix and also hindered the formation of adhesion patches and deep plowing grooves during the sliding wear process, leading to the improvement of wear resistance of a titanium alloy substrate surface.

Sign in / Sign up

Export Citation Format

Share Document