scholarly journals Growth Mode and Characterization of Si/SiC Heterostructure of Large Lattice-Mismatch

2018 ◽  
Author(s):  
Lianbi Li
Keyword(s):  
Lattice Mismatch ◽  
Growth Mode ◽  
Large Lattice ◽  
Large Lattice Mismatch

Preparation and Characterization of CdSxTe1−x Alloys and Films

2001 ◽  
Vol 668 ◽  
Author(s):  
R.G. Dhere ◽  
D.S. Albin ◽  
S.E. Asher ◽  
H.R. Moutinho ◽  
D. Compton ◽  
...  
Keyword(s):  
High Efficiency ◽  
Lattice Mismatch ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Alloy Films ◽  
Present Generation ◽  
Large Lattice ◽  
Large Lattice Mismatch ◽  
Post Deposition

ABSTRACTIntermixing at the CdS/CdTe interface is considered crucial for the performance of CdTe-based solar cells. High-efficiency devices have been fabricated in spite of large lattice mismatch between CdS and CdTe. Intermixing and formation of CdSxTe1−x alloys in present-generation devices result from high-temperature CdTe deposition and post-deposition CdCl2 treatment. In this paper, we present our work on preparation of CdSxTe1−x-alloy powders and films. In this process, the CdS and CdTe powders are sized and mixed, isostatically pressed into a bar, sealed into closed-quartz ampoules, annealed at temperatures >1000°C, and water quenched. X-ray diffraction (XRD) analysis showed that they contained only distinct phases on S-rich and Te-rich sides of the phase diagram. Recently, two new batches of CdSxTe1−x material, produced by an improved process have been obtained (x =0.71 and x= 0.35 in CdSxTe1−x alloy). Initial XRD results from the films deposited by close spaced sublimation (CSS) using these powders reveal that both samples of bulk powders (prior to CSS deposition) are single-phase and demonstrate CdS-like characteristics (hexagonal). We have deposited CdSxTe1−x-alloy films using these powders. These alloy powders evaporate more congruently as opposed to mixed powders of CdS and CdTe. We will also present results on the structural properties of thin CdSxTe1−x alloy films deposited using these powders by CSS.

Characterization of Interfacial Structure in Large Lattice Mismatch Heteroepitaxy: Ag/Si (111)

1990 ◽  
Vol 209 ◽  
Author(s):  
D.C. McKenna ◽  
G.-C. Wang ◽  
K. Rajan
Keyword(s):  
Lattice Mismatch ◽  
Interfacial Structure ◽  
Epitaxial Relationship ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Interfacial Structures ◽  
Large Lattice ◽  
Large Lattice Mismatch ◽  
Diffraction Patterns

ABSTRACTThe interfacial structure of a large lattice mismatched (˜25%) (111) Ag-Si system was studied by using transmission electron diffraction (SADP - Selected Area Diffraction Pattern). The epitaxial films of Ag (600–1200Å) were grown by MBE on flat Si(111) and misoriented Si(1ll) surfaces. We have examined the interfacial structures of the Ag on 2° misoriented Si(111) using diffraction patterns of cross sectional view. Through a detail analysis of thelocation and shape of the diffraction spots, we can determine the epitaxial relationship between Ag and Si, the small tilt angle of Ag(111) planes withrespect to the misoriented Si(111), the period of the finite terrace size of the misoriented Si substrate, and the size of the ordered region in the Ag film. The O-lattice analysis developed by Bollmann has beenapplied to this interface andthe result is compared with the SADP observation.

Characterization of Ferroelectric Thin Film PLZT(9/65/35) on R-Plane Sapphire

1990 ◽  
Vol 200 ◽  
Author(s):  
S. Krishnakumar ◽  
S.C. Esener ◽  
C. Fan ◽  
V.H. Ozguz ◽  
M.A. Title ◽  
...  
Keyword(s):  
Lattice Mismatch ◽  
Ferroelectric Thin Film ◽  
Spatial Light Modulators ◽  
Light Modulators ◽  
Large Lattice ◽  
Large Lattice Mismatch ◽  
Deposited Films ◽  
Deposition Techniques ◽  
Post Deposition

ABSTRACTThe deposition of ferroelectric PLZT on r-plane sapphire using R-F Triode Magnetron Sputtering is reported. R-plane (1102) sapphire is chosen, in spite of its large lattice mismatch to PLZT, because of its capability of integrating MOS silicon circuits with PLZT modulators. Perovskite PLZT films with the desired composition (9/65/35) are obtained using co-deposition techniques around 500°C and post deposition annealing at 650°C. The deposited films exhibit good optical and electro-optical properties. The room temperature dielectric constant of the films was 1800 at 10 Khz. The refractive index of the films was in the range 2.2–2.5. The films showed a quadratic E-O effect with R=0.6×10−16 m2/V2. The films are promising for smart Spatial Light Modulators (SLM) applications.

scholarly journals Enhanced luminescence/photodetecting bifunctional devices based on ZnO:Ga microwire/p-Si heterojunction by incorporating Ag nanowires

2021 ◽  
Author(s):  
Mingming Jiang ◽  
Yang Liu ◽  
Ruiming Dai ◽  
Kai Tang ◽  
Peng Wan ◽  
...  
Keyword(s):  
Band Gap ◽  
Carrier Mobility ◽  
Lattice Mismatch ◽  
Semiconductor Materials ◽  
Large Lattice ◽  
Ag Nanowires ◽  
Large Lattice Mismatch ◽  
Enhanced Luminescence ◽  
Indirect Band Gap

Suffering from the indirect band gap, low carrier mobility, and large lattice mismatch with other semiconductor materials, one of the current challenges in Si-based materials and structures is to prepare...

High mobility AlGaN/GaN heterostructures grown on Si substrates using a large lattice-mismatch induced stress control technology

2015 ◽  
Vol 106 (14) ◽  
pp. 142106 ◽  
Author(s):  
Jianpeng Cheng ◽  
Xuelin Yang ◽  
Ling Sang ◽  
Lei Guo ◽  
Anqi Hu ◽  
...  
Keyword(s):  
Lattice Mismatch ◽  
High Mobility ◽  
Control Technology ◽  
Stress Control ◽  
Si Substrates ◽  
Induced Stress ◽  
Large Lattice ◽  
Large Lattice Mismatch

Epitaxial Growth of Copper, Silver and Gold on a Semiconducting Layered Material: Tungsten Disulfide

1987 ◽  
Vol 102 ◽  
Author(s):  
D. L. Doering ◽  
F. S. Ohuchi ◽  
W. Jaegermann ◽  
B. A. Parkinson
Keyword(s):  
Thin Films ◽  
Epitaxial Growth ◽  
Lattice Mismatch ◽  
Layered Material ◽  
Tungsten Disulfide ◽  
Layer By Layer ◽  
Metal Contacts ◽  
Layered Semiconductor ◽  
Large Lattice ◽  
Large Lattice Mismatch

ABSTRACTThe growth of copper, silver and gold thin films on tungsten disulfide has been examined as a model of metal contacts on a layered semiconductor. All three metals were found to grow epitaxially on the WS2. However, Cu appears to form a discontinuous film while Au and Ag grow layer by layer. Such epitaxial growth is somewhat surprising since there is a large lattice mismatch between the metals and the WS2.

III-V monolithic resonant photoreceiver using local epitaxy and large lattice mismatch material

1991 ◽  
Vol 4 (6) ◽  
pp. 217-219 ◽  
Author(s):  
S. Aboulhouda ◽  
J. P. Vilcot ◽  
M. Razeghi ◽  
D. Decoster ◽  
M. Francois ◽  
...  
Keyword(s):  
Lattice Mismatch ◽  
Large Lattice ◽  
Large Lattice Mismatch

Equilibrium Analysis of Lattice-Mismatched Nanowire Heterostructures

2002 ◽  
Vol 737 ◽  
Author(s):  
E. Ertekin ◽  
P.A. Greaney ◽  
T. D. Sands ◽  
D. C. Chrzan
Keyword(s):  
Simple Model ◽  
Misfit Dislocation ◽  
Critical Thickness ◽  
Lattice Mismatch ◽  
Equilibrium Analysis ◽  
Misfit Dislocations ◽  
Model Based ◽  
Large Lattice ◽  
Large Lattice Mismatch

ABSTRACTThe quality of lattice-mismatched semiconductor heterojunctions is often limited by the presence of misfit dislocations. Nanowire geometries offer the promise of creating highly mismatched, yet dislocation free heterojunctions. A simple model, based upon the critical thickness model of Matthews and Blakeslee for misfit dislocation formation in planar heterostructures, illustrates that there exists a critical nanowire radius for which a coherent heterostructured nanowire system is unstable with respect to the formation of misfit dislocations. The model indicates that within the nanowire geometry, it should be possible to create perfect heterojunctions with large lattice-mismatch.

scholarly journals Epitaxial Growth of Germanium on Silicon for Light Emitters

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Chengzhao Chen ◽  
Cheng Li ◽  
Shihao Huang ◽  
Yuanyu Zheng ◽  
Hongkai Lai ◽  
...  
Keyword(s):  
Quantum Wells ◽  
Near Infrared ◽  
Lattice Mismatch ◽  
Chemical Vapor ◽  
Sige Layer ◽  
Infrared Light ◽  
Multiple Quantum ◽  
Light Emitters ◽  
Large Lattice ◽  
Large Lattice Mismatch

This paper describes the role of Ge as an enabler for light emitters on a Si platform. In spite of the large lattice mismatch of ~4.2% between Ge and Si, high-quality Ge layers can be epitaxially grown on Si by ultrahigh-vacuum chemical vapor deposition. Applications of the Ge layers to near-infrared light emitters with various structures are reviewed, including the tensile-strained Ge epilayer, the Ge epilayer with a delta-doping SiGe layer, and the Ge/SiGe multiple quantum wells on Si. The fundamentals of photoluminescence physics in the different Ge structures are discussed briefly.

Nucleation of misfit and threading dislocations in GaSb/GaAs(001) heterostructure

1996 ◽  
Vol 54 ◽  
pp. 946-947
Author(s):  
W. Qian ◽  
M. Skowronski ◽  
R. Kaspi ◽  
M. De Graef
Keyword(s):  
Lattice Mismatch ◽  
Strain Relaxation ◽  
Threading Dislocation ◽  
Threading Dislocations ◽  
Misfit Dislocations ◽  
Extended Defects ◽  
Large Lattice ◽  
Threading Dislocation Density ◽  
Small Lattice ◽  
Large Lattice Mismatch

GaSb thin film grown on GaAs is a promising substrate for fabrication of electronic and optical devices such as infrared photodetectors. However, these two materials exhibit a 7.8% lattice constant mismatch which raises concerns about the amount of extended defects introduced during strain relaxation. It was found that, unlike small lattice mismatched systems such as InxGa1-xAs/GaAs or GexSi1-x/Si(100), the GaSb/GaAs interface consists of a quasi-periodic array of 90° misfit dislocations, and the threading dislocation density is low despite its large lattice mismatch. This paper reports on the initial stages of GaSb growth on GaAs(001) substrates by molecular beam epitaxy (MBE). In particular, we discuss the possible formation mechanism of misfit dislocations at the GaSb/GaAs(001) interface and the origin of threading dislocations in the GaSb epilayer.GaSb thin films with nominal thicknesses of 5 to 100 nm were grown on GaAs(001) by MBE at a growth rate of about 0.8 monolayers per second.

Sign in / Sign up

Export Citation Format

Share Document