On the Handicapping of Distance Racing Yachts - A Proposal for IOR IV

1974 ◽  
Author(s):  
Bennett Fischer
Keyword(s):  
Weight Distribution ◽  
Complete System ◽  
Present Rule ◽  
Before And After

This is a proposal for a complete system for handicapping Distance Racing Yachts using the present NAYRU time allowance tables. It includes measurement, rating and the procedure for correcting ratings before and after races. The objectives and means of judging rating rules are outlined. Faults in the present rule are listed and suggestions for improvements are made. The five major parameters; length, sail area, displacement underbody configuration and weight distribution are explained. The present and proposed rules are compared and the probably effect on existing yachts is discussed.

EFFECTS OF FRESH PLASMA OR WHOLE BLOOD TRANSFUSIONS ON PATIENTS WITH VARIOUS TYPES OF MUCOPOLYSACCHARIDOSIS

PEDIATRICS ◽  
1972 ◽  
Vol 50 (5) ◽  
pp. 688-692
Author(s):  
Anatole S. Dekaban ◽  
Kenton R. Holden ◽  
George Constantopoulos
Keyword(s):  
Molecular Weight ◽  
Weight Distribution ◽  
Whole Blood ◽  
Blood Transfusions ◽  
Molecular Weights ◽  
The Third ◽  
Clinical Observations ◽  
Before And After ◽  
Fresh Plasma

Repeated fresh plasma or whole blood transfusions were given to five patients with either Hurler, Hunter, or Sanfilippo types of mucopolysaccharidosis. Clinical observations and total 24-hour urinary AMPS and their composition and molecular weight distribution were determined before, during, and after transfusions. The two patients who received plasma transfusions showed no noticeable change in the amount of AMPS excreted; of the three patients who received whole blood transfusions, two had slightly less excretion of AMPS while the third showed no difference. The AMPS in the CSF were measured in one patient before and after blood transfusions and found to be unchanged; likewise, the determination of molecular weights in the isolated AMPS was virtually identical. In the patients studied, the transfusions caused no demonstrable difference in the patients' clinical condition.

Dorsal horn disinhibition and movement-induced behaviour in a rat model of inflammatory arthritis

Rheumatology ◽  
2020 ◽  
Author(s):  
Samantha Locke ◽  
Noosha Yousefpour ◽  
Alfredo Ribeiro-da-Silva
Keyword(s):  
Dorsal Horn ◽  
Neuronal Activity ◽  
Weight Distribution ◽  
Inflammatory Arthritis ◽  
Joint Inflammation ◽  
Male Rats ◽  
Nociceptive Neurons ◽  
Before And After ◽  
Fos Expression ◽  
Behaviour Changes

Abstract Objectives Alterations beyond joint inflammation such as changes in dorsal horn (DH) excitability contribute to pain in inflammatory arthritis (IA). More complete understanding of specific underlying mechanisms will be important to define novel targets for the treatment of IA pain. Pre-clinical models are useful, but relevant pain assays are vital for successful clinical translation. For this purpose, a method is presented to assess movement-induced pain-related behaviour changes that was subsequently used to investigate DH disinhibition in IA. Methods IA was induced by intra-articular injection of complete Freund’s adjuvant (CFA) in male rats, and weight distribution was assessed before and after walking on a treadmill. To confirm increased activity in nociception-related pathways, fos expression was assessed in the superficial DH, including in nociceptive neurons, identified by neurokinin 1 (NK1) immunoreactivity, and interneurons. Inhibitory terminal density onto NK1+ neurons was assessed and lastly, a cohort of animals was treated for 3 days with gabapentin. Results At 4 weeks post-CFA, walking reduced weight distribution to the affected joint and increased DH fos expression, including in NK1+ neurons. Neuronal activity in inhibitory cells and inhibitory terminal density on NK1+ neurons were decreased in CFA-treated animals compared with controls. Treatment with gabapentin led to recovered behaviour and DH neuronal activity pattern in CFA-treated animals. Conclusion We describe an assay to assess movement-induced pain-related behaviour changes in a rodent IA model. Furthermore, our results suggest that disinhibition may contribute to pain related to movement in IA.

scholarly journals Functionality and molecular weight distribution of red oak lignin before and after pyrolysis and hydrogenation

2017 ◽  
Vol 19 (5) ◽  
pp. 1378-1389 ◽  
Author(s):  
Daniel J. McClelland ◽  
Ali Hussain Motagamwala ◽  
Yanding Li ◽  
Marjorie R. Rover ◽  
Ashley M. Wittrig ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Molecular Weight Distribution ◽  
Weight Distribution ◽  
Red Oak ◽  
Before And After ◽  
Pyrolytic Lignin ◽  
Ft Icr Ms ◽  
Ft Icr

GVL lignin, pyrolytic lignin, and hydrogenated pyrolytic lignin were studied and characterized by FT-ICR MS, GPC, and NMR.

scholarly journals Physiological and Chemical Investigations into Microbial Degradation of Synthetic Poly(cis-1,4-isoprene)

2000 ◽  
Vol 66 (9) ◽  
pp. 3680-3685 ◽  
Author(s):  
Helge B. Bode ◽  
Axel Zeeck ◽  
Kirsten Pl�ckhahn ◽  
Dieter Jendrossek
Keyword(s):  
Molecular Weight ◽  
Molecular Weight Distribution ◽  
Weight Distribution ◽  
Degradation Products ◽  
Streptomyces Coelicolor ◽  
Culture Fluid ◽  
Control Measurement ◽  
Molecular Weight Polymer ◽  
Vulcanized Rubber ◽  
Before And After

ABSTRACT Streptomyces coelicolor 1A and Pseudomonas citronellolis were able to degrade synthetic high-molecular-weight poly(cis-1,4-isoprene) and vulcanized natural rubber. Growth on the polymers was poor but significantly greater than that of the nondegrading strain Streptomyces lividans 1326 (control). Measurement of the molecular weight distribution of the polymer before and after degradation showed a time-dependent increase in low-molecular-weight polymer molecules forS. coelicolor 1A and P. citronellolis, whereas the molecular weight distribution for the control (S. lividans 1326) remained almost constant. Three degradation products were isolated from the culture fluid of S. coelicolor 1A grown on vulcanized rubber and were identified as (6Z)-2,6-dimethyl-10-oxo-undec-6-enoic acid, (5Z)-6-methyl-undec-5-ene-2,9-dione, and (5Z,9Z)-6,10-dimethyl-pentadec-5,9-diene-2,13-dione. An oxidative pathway from poly(cis-1,4-isoprene) to methyl-branched diketones is proposed. It includes (i) oxidation of an aldehyde intermediate to a carboxylic acid, (ii) one cycle of β-oxidation, (iii) oxidation of the conjugated double bond resulting in a β-keto acid, and (iv) decarboxylation.

Deformation Replication

1970 ◽  
Vol 28 ◽  
pp. 280-281
Author(s):  
J. Temple Black
Keyword(s):  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Rake Face ◽  
Orthogonal Machining ◽  
Aluminum Chips ◽  
Before And After ◽  
Materials Used ◽  
Glass Knife ◽  
Very High

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.

The Clinical, Roentgenological and Morphological Effects of an Acute Exposure of Phosgene on the Lungs of Dogs

1971 ◽  
Vol 29 ◽  
pp. 236-237
Author(s):  
R. F. Bils ◽  
W. F. Diller ◽  
F. Huth
Keyword(s):  
Latent Period ◽  
Chemical Industry ◽  
Toxic Substance ◽  
Lung Edema ◽  
X Rays ◽  
Beagle Dogs ◽  
Male And Female ◽  
Morphological Alterations ◽  
Before And After ◽  
Electron Microscopes

Phosgene still plays an important role as a toxic substance in the chemical industry. Thiess (1968) recently reported observations on numerous cases of phosgene poisoning. A serious difficulty in the clinical handling of phosgene poisoning cases is a relatively long latent period, up to 12 hours, with no obvious signs of severity. At about 12 hours heavy lung edema appears suddenly, however changes can be seen in routine X-rays taken after only a few hours' exposure (Diller et al., 1969). This study was undertaken to correlate these early changes seen by the roengenologist with morphological alterations in the lungs seen in the'light and electron microscopes.Forty-two adult male and female Beagle dogs were selected for these exposure experiments. Treated animals were exposed to 94.5-107-5 ppm phosgene for 10 min. in a 15 m3 chamber. Roentgenograms were made of the thorax of each animal before and after exposure, up to 24 hrs.

Ultrastructure of Melanin Formation in Curvularia sp., Alternaria sp., and Drechslera Sorokiniana

1977 ◽  
Vol 35 ◽  
pp. 398-399
Author(s):  
M. H. Wheeler ◽  
W. J. Tolmsoff ◽  
A. A. Bell
Keyword(s):  
Potassium Phosphate ◽  
Thielaviopsis Basicola ◽  
Wild Type ◽  
Potassium Phosphate Buffer ◽  
Transmission Microscopy ◽  
Electron Transmission ◽  
Melanin Formation ◽  
Before And After ◽  
Alternaria Sp ◽  
Electron Transmission Microscopy

(+)-Scytalone [3,4-dihydro-3,6,8-trihydroxy-l-(2Hj-naphthalenone] and 1,8-di- hydroxynaphthalene (DHN) have been proposed as intermediates of melanin synthesis in the fungi Verticillium dahliae (1, 2, 3, 4) and Thielaviopsis basicola (4, 5). Scytalone is enzymatically dehydrated by V. dahliae to 1,3,8-trihydroxynaphthalene which is then reduced to (-)-vermelone [(-)-3,4- dihydro-3,8-dihydroxy-1(2H)-naphthalenone]. Vermelone is subsequently dehydrated to DHN which is enzymatically polymerized to melanin.Melanin formation in Curvularia sp., Alternaria sp., and Drechslera soro- kiniana was examined by light and electron-transmission microscopy. Wild-type isolates of each fungus were compared with albino mutants before and after treatment with 1 mM scytalone or 0.1 mM DHN in 50 mM potassium phosphate buffer, pH 7.0. Both chemicals were converted to dark pigments in the walls of hyphae and conidia of the albino mutants. The darkened cells were similar in appearance to corresponding cells of the wild types under the light microscope.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

The Precipitation of Si in AlCuSi Thin Films

1973 ◽  
Vol 31 ◽  
pp. 34-35 ◽  
Author(s):  
R. M. Anderson
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Heat Treatment ◽  
Solid Solution ◽  
Integrated Circuit ◽  
Copper Film ◽  
Solution Concentration ◽  
X Ray ◽  
Silicon Thin Films ◽  
Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

Sign in / Sign up

Export Citation Format

Share Document