scholarly journals Two element folded meander line MIMO antenna for Wireless applications

2019 ◽  
Vol 23 (1) ◽  
pp. 11
Author(s):  
Sanjay Chouhan ◽  
Leeladhar Malviya
Keyword(s):  
Indoor Environment ◽  
Return Loss ◽  
Radiation Effect ◽  
High Efficiency ◽  
Mimo Antenna ◽  
Compact Antenna ◽  
Wireless Applications ◽  
Low Profile ◽  
Compact Size ◽  
Meander Line

Compact antenna, appropriate gain, high efficiency, wide bandwidth, minimum envelope correlation coefficient (ECC), large total active reflection coefficient (TARC) bandwidth, and low specific absorption rate (SAR) are certain conditions set on the present/future generations of wireless communication antennas with the lowest cost of implementation. A compact low profile folded MIMO antenna has been designed using CST tool to cover application at 5.2 GHz. The reported folded MIMO antenna has bandwidth of 600 MHz (5.0-5.6 GHz) and has fractional bandwidth of 11.32 % along with the compact size of 37.5 × 17.0 mm2 . The reported MIMO antenna has ECC of < 10-2. The proposed folded MIMO antenna resonates at 5.2 GHz and has return loss of -44.0 dB. The inter-port isolation in antenna ports is > 11.50 dB in the defined frequency band. The response of TARC shows > 580 MHz of bandwidth with pair of excitation angles at antenna ports. The gain of antenna is > 3.0 dBi in the operating band. The reported radiating geometry makes the design very compact. To check the radiation effect on human body in different positions, the SAR is evaluated for indoor environment.

A Superwideband Monopole Multiple-Input-Multiple-Output (MIMO) Antenna with Dual Notched (Inverted T-Shaped Stub/U-Shaped Slit) Band Characteristics for Wireless Applications

2019 ◽  
Vol 16 (10) ◽  
pp. 4242-4248
Author(s):  
Manoj Kapil ◽  
Manish Sharma
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Research Article ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Microstrip Feed

In this research article, a compact MIMO (Multiple-Input-Multiple-Output) antenna with inclusion of two notched bands characteristics is presented. Designed MIMO antenna consist of dual radiating patches printed on one surface of the substrate which covers measured wide impedance bandwidth of 2.88 GHz–19.98 GHz and satisfies bandwidth ratio more than 10:1 for superwideband with compact size of 18 mm × 34 mm. Two radiating patch are placed symmetrically for MIMO configuration and notched bands to eliminate WiMAX/C and WLAN bands are obtained by attaching inverted T-shaped stub on radiating patch and etched inverted U-shape slit in microstrip feed. Isolation between the two radiating patch is maintained by adding two L-shaped stub in slotted rectangular ground plane. Measured radiation pattern are stable in operating band and offers maximum 4.23 dBi and 89% gain and radiation efficiency respectively. Moreover, antenna shows good diversity performance with Envelope-Correlation-Coefficient (ECC) < 0.5, Directive-Gain (DG) > 9.95 dB and Total-Active-Reflection Coefficient (TARC) < -30 dB.

A new compact and miniaturized multiband uniplanar CPW-fed Monopole antenna with T-slot inverted for multiple wireless applications

2017 ◽  
Vol 9 (7) ◽  
pp. 1541-1545 ◽  
Author(s):  
Rachid Dakir ◽  
Jamal Zbitou ◽  
Ahmed Mouhsen ◽  
Abdelwahed Tribak ◽  
Angel Mediavilla Sanchez ◽  
...  
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Configuration Design ◽  
Rectangular Slot ◽  
Wireless Applications ◽  
Compact Size ◽  
Feeding Technique ◽  
Wireless Application ◽  
Antenna Configuration

In this paper, the design of a new compact uniplanar coplanar waveguide-fed antenna for multiband wireless application is presented and investigated. This antenna has a compact size of 25 × 25 mm2 and consists of a three parallel stub optimized added on rectangular slot to the radiator patch and T-shaped which inverted in the ground plane. The final prototype antenna designing resonantes at frequency bands (2.4–2.9 GHz), (3.7–5.2 GHz), and (5.7–6 GHz) with a return loss less than −10 dB. Details of the antenna configuration, design, simulation, and experimental results are presented, investigated, and discussed. The compactness, simple feeding technique, and conception of the uniplanar design make it easy to be integrated within devices of multiples wireless applications.

scholarly journals Miniaturized Wideband Microstrip Antenna for Recent Wireless Applications

2018 ◽  
Vol 7 (5) ◽  
pp. 7-13 ◽  
Author(s):  
S. A. Shandal ◽  
Y. S. Mezaal ◽  
M. F. Mosleh ◽  
M. A. Kadim
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Frequency Range ◽  
Impedance Bandwidth ◽  
Wireless Devices ◽  
Microstrip Resonator ◽  
Resonant Frequencies ◽  
Compact Antenna ◽  
Wireless Applications

In this paper, a pentagon slot inside fractal circular patch microstrip resonator to design compact antenna over partial ground plane is introduced using 3rd iteration of adopted fractal geometry. This antenna is modeled on FR4 substrate with a size of (20 x 18) mm2, thickness of 1.5mm, permittivity of 4.3 and loss tangent of 0.02. The used type of feeding is microstrip line feed. It is designed to operate at wide frequency range of (4.5-9.3) GHz at resonant frequencies of 5.7GHz and 7.9GHz with impedance bandwidth of 4.8 GHz. Both lengths of ground plane Lg and width of feed line Wf are optimized in order to acquire optimum bandwidth. The simulated return loss values are -33 and -41 dB at two resonant frequencies of 5.7 and 7.9 GHz with gain of 3.2 dB. The simulated results offered noteworthy compatibility with measured results. Also, the proposed wideband microstrip antenna has substantial compactness that can be integrated within numerous wireless devices and systems.

scholarly journals Design and Performance Analysis of a Compact Planar MIMO Antenna for IoT Applications

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 7909
Author(s):  
Saminathan Thiruvenkadam ◽  
Eswaran Parthasarathy ◽  
Sandeep Kumar Palaniswamy ◽  
Sachin Kumar ◽  
Lulu Wang
Keyword(s):  
Multiple Input Multiple Output ◽  
Back Side ◽  
Mimo Antenna ◽  
Iot Applications ◽  
Quarter Wavelength ◽  
Low Profile ◽  
Compact Size ◽  
Communication Devices ◽  
Input Multiple Output ◽  
And Performance

This article presents a quad-band multiple-input-multiple-output (MIMO) antenna for the Internet of Things (IoT) applications. The proposed antenna consists of four quarter-wavelength asymmetrical meandered radiators, microstrip feed lines, and modified ground planes. The antenna elements are arranged in a chiral pattern to improve isolation between them, with two radiators and two ground planes placed on the front side of the substrate and the other two on the back side. The MIMO antenna has an operating bandwidth (S11 ≤ −10 dB) of 1.76–1.84 GHz, 2.37–2.56 GHz, 3.23–3.68 GHz, and 5.34–5.84 GHz, covering GSM, WLAN, WiMAX, and 5G frequency bands. The isolation between the radiating elements is greater than 18 dB in the operating bands. The peak gain of the antenna is 3.6 dBi, and the envelope correlation coefficient (ECC) is less than 0.04. Furthermore, the proposed antenna is validated for IoT-based smart home (SH) applications. The prototype MIMO antenna is integrated with a commercially available ZigBee device, and the measured values are found to be consistent with the expected results. The proposed MIMO antenna could be a good candidate for IoT systems/modules due to its low profile, compact size, lightweight, and easy integration with wireless communication devices.

scholarly journals A Novel Compact MIMO Planar Inverted-F Antenna (PIFA) for Future 5G Wireless Devices

2018 ◽  
Vol 7 (4.5) ◽  
pp. 320
Author(s):  
Neha Loharia ◽  
Shashi B. Rana ◽  
Naveen Kumar
Keyword(s):  
Wireless Communication ◽  
Mobile Communication ◽  
Return Loss ◽  
Recent Literature ◽  
Diversity Gain ◽  
Performance Parameters ◽  
Wireless Devices ◽  
Good Match ◽  
Mimo Antenna ◽  
Low Profile

In the last decade, mobile communication has shown a tremendous growth in various categories of wireless communication. A novel miniature MIMO Planar inverted F Antenna (PIFA) for 5G future communication has been presented in this paper as a MIMO antenna working at 10 GHz band is not available in recent literature. The proposed PIFA has low profile structure with two radiating elements on its opposite edges. The proposed 5G frequency band of 10 GHz is covered by the MIMO antenna. Various antenna & MIMO performance parameters such as isolation, return loss, VSWR, diversity gain, ECC and radiation pattern are also presented and discussed. Simulated and measured results are in good match with each other.  

A Novel RFID Tag Dipole Antenna

2014 ◽  
Vol 513-517 ◽  
pp. 2808-2811
Author(s):  
Ming Lu He ◽  
Yan Bing Xue ◽  
Jing Zhang
Keyword(s):  
Return Loss ◽  
High Efficiency ◽  
Dipole Antenna ◽  
Antenna Design ◽  
Rfid Tag ◽  
Maximum Gain ◽  
Meander Line ◽  
Read Range

There is a problem in normal meander line antenna (MLA) that it is difficult to get performances of miniaturization, high efficiency and high inductance at the same time. A simple novel antenna design for this challenge is described. Two capacitive loads are added at the end of MLA to adjust the impendence. For saving material, holes are digged on the loads. Simulation by HFSS shows that, comparing with the regular MLA, the proposed antennas impedance enhances from 10-12j to 23+150j, and the maximum gain enhances from 1.31dB to 1.67dB, with a read range of 10.1m. Meanwhile the return loss at 915MHz is-34dB, with a wide-10dB bandwidth of 860 ~ 985 MHz.

scholarly journals Design of Transparent Antenna for 5G Wireless Applications

Proceedings ◽  
2020 ◽  
Vol 63 (1) ◽  
pp. 54
Author(s):  
Sanae Azizi ◽  
Laurent Canale ◽  
Saida Ahyoud ◽  
Georges Zissis ◽  
Adel Asselman
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Light Weight ◽  
Frequency Bandwidth ◽  
Frequency Range ◽  
Wireless Applications ◽  
Compact Size

This paper presents the design of a compact size band patch antenna for 5G wireless communications. This wideband antenna was designed on a glass substrate (12 × 11 × 2 mm3) and is optically transparent and compact. It consists of a radiation patch and a ground plane using AgHT-8 material. The antenna design comprises rectangular shaped branches optimized to attain the wideband characteristics. The calculated impedance bandwidth is 7.7% covering the frequency range of 25 to 27 GHz. A prototype of the antenna and various parameters such as return loss plot, gain plot, radiation pattern plot, and voltage standing wave ratio (VSWR) are presented and discussed. The simulated results of this antenna show that it is well suited for future 5G applications because of its transparency, flexibility, light weight, and wide achievable frequency bandwidth near the millimeter wave frequency band.

Sign in / Sign up

Export Citation Format

Share Document