Influence of effective polarization on ion and water interactions within a biomimetic nanopore

Interactions between ions and water at hydrophobic interfaces within ion channels and nanopores are suggested to play a key role in the movement of ions across biological membranes. Previous molecular dynamics (MD) simulations have shown that the affinity of polarizable anions to aqueous/hydrophobic interfaces can be markedly influenced by including polarization effects through an electronic continuum correction (ECC). Here, we designed a model biomimetic nanopore to imitate the polar pore openings and hydrophobic gating regions found in pentameric ligand-gated ion channels. MD simulations were then performed using both a non-polarizable force field and the ECC method to investigate the behavior of water, Na+ and Cl- ions confined within the hydrophobic region of the nanopore. Number density distributions revealed preferential Cl- adsorption to the hydrophobic pore walls, with this interfacial layer largely devoid of Na+. Free energy profiles for Na+ and Cl- permeating the pore also display an energy barrier reduction associated with the localization of Cl- to this hydrophobic interface, and the hydration number profiles reflect a corresponding reduction in the first hydration shell of Cl-. Crucially, these ion effects were only observed through inclusion of effective polarization which therefore suggests that polarizability may be essential for an accurate description for the behavior of ions and water within hydrophobic nanoscale pores, especially those that conduct Cl-.

Yb to Tb Cooperative Upconversion in Supramolecularly Assembled Complexes in a Solution

The podand-type ligand L, based on a tertiary amine substituted by three pyridyl-6-phosphonic acid functions, forms hydrated complexes with Ln3+ cations. The luminescence properties of the YbL complex were studied in D2O as a function of the pD and temperature. In basic conditions, increases in the luminescence quantum yield and the excited state lifetime of the Yb centered emission associated with the 2F5/2 → 2F7/2 transition were observed and attributed to a change in the hydration number from two water molecules in the first coordination sphere of Yb at acidic pH to a single one in basic conditions. Upon the addition of TbCl3 salts to a solution containing the YbL complex in D2O, heteropolynuclear Yb/Tb species formed, and excitation of the Yb at 980 nm resulted in the observation of the typical visible emission of Tb as a result of a cooperative upconversion (UC) photosensitization process. The UC was further evidenced by the quadratic dependence of the UC emission as a function of the laser power density.

Exploring the Structure–Performance Relationship of Sulfonated Polysulfone Proton Exchange Membrane by a Combined Computational and Experimental Approach

Sulfonated Polysulfone (sPSU) is emerging as a concrete alternative to Nafion ionomer for the development of proton exchange electrolytic membranes for low cost, environmentally friendly and high-performance PEM fuel cells. This ionomer has recently gained great consideration since it can effectively combine large availability on the market, excellent film-forming ability and remarkable thermo-mechanical resistance with interesting proton conductive properties. Despite the great potential, however, the morphological architecture of hydrated sPSU is still unknown. In this study, computational and experimental advanced tools are combined to preliminary describe the relationship between the microstructure of highly sulfonated sPSU (DS = 80%) and its physico-chemical, mechanical and electrochemical features. Computer simulations allowed for describing the architecture and to estimate the structural parameters of the sPSU membrane. Molecular dynamics revealed an interconnected lamellar-like structure for hydrated sPSU, with ionic clusters of about 14–18 Å in diameter corresponding to the hydrophilic sulfonic-acid-containing phase. Water dynamics were investigated by 1H Pulsed Field Gradient (PFG) NMR spectroscopy in a wide temperature range (20–120 °C) and the self-diffusion coefficients data were analyzed by a “two-sites” model. It allows to estimate the hydration number in excellent agreement with the theoretical simulation (e.g., about 8 mol H2O/mol SO3− @ 80 °C). The PEM performance was assessed in terms of dimensional, thermo-mechanical and electrochemical properties by swelling tests, DMA and EIS, respectively. The peculiar microstructure of sPSU provides a wider thermo-mechanical stability in comparison to Nafion, but lower dimensional and conductive features. Nonetheless, the single H2/O2 fuel cell assembled with sPSU exhibited better features than any earlier published hydrocarbon ionomers, thus opening interesting perspectives toward the design and preparation of high-performing sPSU-based PEMs.

A Sustainable Slit Jet FTIR Spectrometer for Hydrate Complexes and Beyond

Fourier transform infrared (FTIR) absorption spectroscopy of cold molecules and clusters in supersonic slit jet expansions complements and extends more sensitive action spectroscopy techniques and provides important reference data for the latter. We describe how its major drawback, large substance and carrier gas consumption, can be alleviated by one to two orders of magnitude via direct and continuous recycling of the gas mixture. This is achieved by a combination of dry rotary lobe and screw pump compression. The signal-to-noise ratio is boosted by the established buffered giant gas pulse technique with full interferogram synchronization. The buildup of water impurities typically limits the recycling gain, but is turned into a feature for the study of hydrate complexes of volatile molecules. Continuous operation with a single gas filling over several days becomes practical and useful. Decadic absorbances in the low ppm range are detectable and the mid infrared range can be recorded simultaneously with the near infrared. The less straightforward hydration number assignment of spectral features in direct absorption spectroscopy is supported by a gradual water buildup at a rate of less than 0.5 mg/h. A recent reassignment proposal for the water dimer OH stretching spectrum is refuted and vibrational spectra of vacuum-isolated 18O-water clusters are presented for the first time. Methanol docking on asymmetric ketones is used to illustrate the advantages and limitations of the recycling concept. Previous assignments of the hydrate complex of 1-phenylethanol are confirmed. Additional features of the setup await testing and refinement, but the recycling technique already substantially widens the applicability of direct absorption spectroscopy of neutral molecular clusters. It may be attractive for other high-throughput jet spectrometers.

Chemical Energetics and Atomic Charges Distribution of Variably Sized Hydrated Sulfate Clusters in the light of Density Functional Theory

Among the ions classified in the Hofmeister series, the firstly ranked divalent sulfate anion has the strongest hydrating and water-structure making propensity. This unique characteristic actually makes it kosmotropic which causes water molecules to interact each other and contributes to gain structural stability of its hydrated clusters [SO42−(H2O)n]n = 1−40. In this study, few variably sized microhydrated sulfate clusters [SO42−(H2O)n]n = 1−4, 16 are considered separately, and inquired their chemical energetics and atomic charge distributions through ab initio based theoretical model. The main objective of this insight is to specify and interpret their thermodynamic stabilities, binding energies, and specific bonding and electronic interactions quantum mechanically. An in-depth analysis of their change in relative ground state electronic energy with respect to hydration number indicates stronger affinity of the sulfate ion towards water molecules while attaining structural stability in any aqueous type solutions. The mathematically determined values of their binding energy (DE) almost holds up the same with this structural stability order: [SO42−(H2O)16] > [SO42−(H2O)4] > [SO42−(H2O)3] > [SO42−(H2O)2] > [SO42−(H2O)], as reliable as experimentally and molecular dynamics simulation predicted trend. Moreover, the Mulliken derived partial atomic charges feature qualitative charge distribution in them which not only depicts electronic interactions between the specific atoms but also exemplifies the involvement of central sulfate units in hydrogen bond formation with surrounding water molecules.

A Sustainable Slit Jet FTIR Spectrometer for Hydrate Complexes and Beyond

Fourier transform infrared (FTIR) absorption spectroscopy of cold molecules and clusters in supersonic slit jet expansions complements and extends more sensitive action spectroscopy techniques and provides important reference data for the latter. We describe how its major drawback, large substance and carrier gas consumption, can be alleviated by one to two orders of magnitude via direct and continuous recycling of the gas mixture. This is achieved by a combination of dry rotary lobe and screw pump compression. The signal-to-noise ratio is boosted by the established buffered giant gas pulse technique with full interferogram synchronization. The buildup of water impurities typically limits the recycling gain, but is turned into a feature for the study of hydrate complexes of volatile molecules. Continuous operation with a single gas filling over several days becomes practical and useful. Decadic absorbances in the low ppm range are detectable and the mid infrared range can be recorded simultaneously with the near infrared. The less straightforward hydration number assignment of spectral features in direct absorption spectroscopy is supported by a gradual water buildup at a rate of less than 0.5 mg/h. A recent reassignment proposal for the water dimer OH stretching spectrum is refuted and vibrational spectra of vacuum-isolated 18O-water clusters are presented for the first time. Methanol docking on asymmetric ketones is used to illustrate the advantages and limitations of the recycling concept. Previous assignments of the hydrate complex of 1-phenylethanol are confirmed. Additional features of the setup await testing and refinement, but the recycling technique already substantially widens the applicability of direct absorption spectroscopy of neutral molecular clusters. It may be attractive for other high-throughput jet spectrometers.

Crystallization, Luminescence and Cytocompatibility of Hexagonal Calcium Doped Terbium Phosphate Hydrate Nanoparticles

Luminescent lanthanide-containing biocompatible nanosystems represent promising candidates as nanoplatforms for bioimaging applications. Herein, citrate-functionalized calcium-doped terbium phosphate hydrate nanophosphors of the rhabdophane type were prepared at different synthesis times and different Ca2+/Tb3+ ratios by a bioinspired crystallization method consisting of thermal decomplexing of Ca2+/Tb3+/citrate/phosphate/carbonate solutions. Nanoparticles were characterized by XRD, TEM, SEM, HR-TEM, FTIR, Raman, Thermogravimetry, inductively coupled plasma spectroscopy, thermoanalysis, dynamic light scattering, electrophoretic mobility, and fluorescence spectroscopy. They displayed ill-defined isometric morphologies with sizes ≤50 nm, hydration number n ~ 0.9, tailored Ca2+ content (0.42–8.11 wt%), and long luminescent lifetimes (800–2600 µs). Their relative luminescence intensities in solid state are neither affected by Ca2+, citrate content, nor by maturation time for Ca2+ doping concentration in solution below 0.07 M Ca2+. Only at this doping concentration does the maturation time strongly affect this property, decreasing it. In aqueous suspensions, neither pH nor ionic strength nor temperature affect their luminescence properties. All the nanoparticles displayed high cytocompatibility on two human carcinoma cell lines and cell viability correlated positively with the amount of doping Ca2+. Thus, these nanocrystals represent promising new luminescent nanoprobes for potential biomedical applications and, if coupled with targeting and therapeutic moieties, they could be effective tools for theranostics.

Variation in Properties of Pre-Nucleation Calcium Carbonate Clusters Induced by Aggregation: A Molecular Dynamics Study

Numerous studies have speculated calcium carbonate (CaCO3) nucleation induced by pre-nucleation clusters (PNCs) aggregation. However, it is challenging for experiments to directly obtain the relationship between PNCs aggregation and nucleation. Herein, we employ molecular dynamics simulations to explore the variation during PNCs aggregation, which can describe the beginning stage of CaCO3 nucleation induced by PNCs aggregation in supersaturated solutions. The results reveal that the formation of CaCO3 nucleus consists of PNCs spontaneous growth, PNCs solubility equilibrium, and aggregation of PNCs inducing nucleation. The PNCs aggregation, accompanied by the variation in the configuration and stability of CaCO3 aggregate, breaks the solubility equilibrium of PNCs and creates conditions for the formation of the more stable nucleus. Besides, the CaCO3 nucleus with the higher coordination number and the lower hydration number form when decreasing the CaCO3 concentration or increasing the temperature. This work not only sheds light on the formation of the CaCO3 nucleus but also contributes to the explanation for CaCO3 polymorphism.

Volumetric and Acoustic Properties of D(+) Glucosamine·HCl and L-Lysine·HCl in Aqueous Solutions at Different Temperatures

In present work, density and speed of sound of aqueous binary mixtures of biologically important amino acid derivatives namely D(+) glucosamine·HCl and L-lysine·HCl have been measured at three different temperatures i.e. (278.15, 288.15 and 298.15) K and in the concentration range of 0.0-0.2 mol kg-1. Using density and speed of sound data, different thermodynamic and acoustic parameters like apparent molar volume (Vφ) and apparent molar isentropic compression (Kφ) of solute have been computed at different temperatures. Speed of sound data have also been used to calculate hydration number (nH) of solute. The temperature dependence of the limiting apparent molar volume of solute has been used to calculate thermal expansion coefficient (α*), apparent molar expansivity (E0 φ) of solute and Hepler’s constant (∂2V0 φ/∂T2). The final outcome of the study has been discussed in terms of various interactions among solute and solvent molecules.